How to set slide as completed on slide start?

Is it possible to mark slide as completed when user enters a slide? For example, i have a slide with audio and text caption. User can advance to the next slide after he reads the text but before the audio and slide ends. Captivate will not mark the slide as completed. If user makes such choice on all slides, lessons stays incomplete in LMS. Is it possible to mark slide as completed as soon as user enters it (at the beginning of the slide instead of it's end)?
Thanks,
Zozo

Yes you can. But it requires the TickTOC widget to do this: http://www.infosemantics.com.au/ticktoc
You simply need to add the TickTOC widget to the beginning of the slide in question, and enter the number of the slide (allowing for any hidden slides before it) into the field provided on the widget. At runtime the slide will be marked as completed as soon as the widget is loaded onto the timeline. The specified slide will also be marked as completed for LMS reporting, thus enabling 100% LMS completion.
Was this what you wanted?

Similar Messages

How to set View for Completed items inside Tasks?

How to set button for 'View' and see Completed items or not completed inside Tasks?

Hi,
You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
tasks; Click Active button to view incomplete tasks.
In Outlook 2007, just click View > Current View to switch between different views.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to set the default behavior of slide effect?

Basically, I am using the spry widget that allow me to do the
click and expand (like how sections get slide up and down) effect.
(Sorry if I don't know the term, I am running a Chinese version...
if it helps at all... it's "滑動" in chinese character)
Is there any way to set it so that the object that being
hidden/revealed stay hidden from the start before the click?
Because of the way I have all my layouts setup, it really destroy
the view if it's revealed from the start.
Thanks in advance!

It seems like the same one, but I can't find the accordion
keyword in any of my code. I have this... which I guess is the code
generated when I insert the widget
"function MM_effectSlide(targetElement, duration, from, to,
toggle)
Spry.Effect.DoSlide(targetElement, {duration: duration,
from: from, to: to, toggle: toggle});
is that the same thing? how would I change it according to
the instruction?
i found the slide effect thing on adobe lab and found out how
to have the element hide initially (by adding display: none; to my
css), but then another weird problem.
i have 8 divs wrap inside a big div "Main" which would be
slid up and down. "Main" slid up and down as expected, but one of
the small div (the first one to be precise) simply disappeared. the
margin that I set for it still display correctly (I set the div to
be 140 px, and there is a 140 px space), but no content (I have a
mouseswap image),
when I remove the display: none; code from the div "Main"
part of the css, then the small div display correctly, with the
mouse swap image.
Did I do something wrong?

How to set the default action of slide switch to auto-rotate

Is there a way to set the default action of the slide switch to auto-rotate during the OS loading instead of volume setting?

You change the function of the side switch with Settings -> General -> Use side switch to:
I don't know what you mean by, "during the OS loading".

How to set a New Tab as the start page in Firefox and lock in my choice of web sites

You may set the New Tab page Firefox shows when opening a new tab as its start page, and you can lock in the web sites you want displayed there.
I set my browser to open a New Tab as its start page and have locked in six destinations from which to choose on my start page.
First I open Firefox and open a new tab. Then I delete any open tabs other than this New Tab. Optionally, I can also set a second tab to open to a specific web site
Next I go to Tools and Options (or Edit and Preferences in Linux) and select the General tab on the far left. Click on
[Use Current Pages].
Each time I open Firefox it will open showing me the New Tab.
I can select from pages that I have already visited the six pages I want to have appearing on my New Tab every time. Supposing there are no pages locked in yet, and I don't want the site in the top left. I hit the X in its thumbnail's top right corner, it disappears and every other site thumbnail moves up and there is a new site appearing in the sixth slot. Note that if I have visited one page frequently, it may appear more than once, or be replaced by itself. If that happens, just keep deleting until the page you want shows up.
If I find a site that I want to save, then there is a thumbtack in the top left corner of the thumbnail. It is black, but if I click it it turns blue, and the thumbnail is a keeper.
This web site is in the second row, second over, but I want it to be up on the top row. Just drag and drop and the two sites exchange places. Make sure it has a blue thumbtack. The lock-down thumbtacks and delete X symbols appear in the top left and top right, respectively while the mouse is hovering over them.
It is possible to delete a saved site, and it is possible to undo the thumbtack. Simply click the X to delete or click the blue thumbtack to unlock the site and turn the thumbtack black.
You may choose to tack down a few sites and let the remainder float in and out, driven by your browsing history.
Through my use of this approach, I have instant access to my club's web site, two Webmail sites, and some other often-visited places on the Web, all in one start page.
About the only thing I really don't need there is a Google search box, for if I enter my search terms in the address bar I get the same result as if I had specifically typed in the search box.
Some add-ons, often potentially unwanted programs (PUPs), will replace the Firefox about:newtab (address of the New Tab) with eBay, Facebook, Twitter icons among others, and a different search engine. These icons may have a nicer appearance than the default Firefox New Tab, but you may also be looking at extra, unnecessary work for the computer, especially if behind the pretty icons there is a hidden agenda.
Personally, I would stay clear of these add-ons, and perform some scanning with an up-to-date antivirus and antimalware software.

If this is not a pinned (App) tab then the home page should open in that tab.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to open certain program(s) auto on start up?

Mac newbie. Need to know how to set certain programs to open on start up somewhat like windows startup menu. Thanks.

Open the Accounts pane of System Preferences, click on Login Items, and add those applications to the list.
(17623)

How to set up slider mobile menu widget on master and pages of mobile website in Muse

Adobe Muse Slider Mobile Menu Widget by MuseThemes
I am new to mobile website design and Muse, I love this widget, but I am not sure how to set it up on multiple pages.
Do I put it on the master? Content covers it when it is on master, so I could use some help.
Thanks so much, anyone know of tutorials or can anyone give me a game plan to set up. thanks so very much!

Thanks, my issue was that the content was in front of the navigation menu see screen shot (taken in preview in Muse)

Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.

You should contact Microsoft for Mac Support and/or post in their forums.

How to set the transition duration of a slide in keynote with applescript

hi
how to set the transition duration of a slide in keynote with applescript
i made an applescript script which converts a numbers file to a keynote presentation
figured out how to set the transitions but cant find how to set the time
+set appTransition of slideTransition of current slide to "apple:dissolve"+
anyone?

you can send keystrokes to invoke menu commands via shortcuts but as for transition time not sure. You've check the dictionary right? Scripting support is very limited in KN.

Where can I find detailed instruction on how to set up Likert quiz slides in Captivate 7?

I am learning Captivate 7 and I'm stuck trying to create a series of Likert quiz slides. I can't find detailed instruction on how to set up the selections on the scale.

I would like to know how to read Likert results. Any help would be appreciated.
I have 15 comments that I need feedback from. There are three possible responses; Seldom, Sometimes, & Often. I would like to assign a point value (numeric value) to each response.
Seldom=1
Sometimes=2
Often=3
Once they have been answered , I would like to then take the total point values of only specific questions and display them. (e.g.Questions 2,4,7,9,13). Is it possible to track and assign a point value to each response. I figure once I get them into variables I can create an Advance Action to do the math. Any help would be greatly appreciated.
Thanks

Slider.verticalThumIcon ? How to set a custom icon for JSlider

Hi Guys,
Can anyone please tell me where I am going wrong in the code below.
I am trying to change the thum icon for JSlider to a custom one, but for some reason the new thum icon is not getting displayed.....
UIDefaults defaults = UIManager.getDefaults();
defaults.put("Slider.verticalThumbIcon", new ImageIcon(Slider.class.getResource("./cursor.jpg")));
defaults.put("Slider.background", Color.BLUE);
final JSlider slider = new JSlider();
slider.setPreferredSize(new Dimension(250,20));
getContentPane().add(slider, BorderLayout.NORTH);
I can see the blue background, BUT I still see the default thumb icon.
I also tried using
defaults.put("Slider.verticalThumbIcon", new ImageIcon("./cursor.jpg"));
Thanks a ton...

this works OK
import java.awt.*;
import javax.swing.*;
import javax.swing.plaf.basic.BasicSliderUI;
import java.net.URL;
import javax.imageio.ImageIO;
class Testing extends JFrame
public Testing()
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    setLocation(200,100);
    JSlider slider = new JSlider(0,100,0);
    slider.setUI(new MyBasicSliderUI(slider));
    slider.setMajorTickSpacing(10);
    slider.setMinorTickSpacing(5);
    slider.setPaintTicks(true);
    slider.setPaintLabels(true);
    JPanel jp = new JPanel();
    jp.add(slider);
    getContentPane().add(slider);
    pack();
class MyBasicSliderUI extends BasicSliderUI
    Image im;
    public MyBasicSliderUI(JSlider js)
      super(js);
    public void paintThumb(Graphics g)
      try
        URL url = new URL(getClass().getResource("Save.gif"), "Save.gif");
        im = ImageIO.read(url);
      catch(Exception e){e.printStackTrace();}
      Rectangle thumb = thumbRect;
      g.drawImage(im,thumb.x,thumb.y,null);
public static void main(String[] args){new Testing().setVisible(true);}
}

LMS not reporting complete for slide views

Hi,
I am trying to get my captivate projects to report competion status as complete to the LMS based on slide views. For testing I have created a very simple two slide Captivate. Both slides have 3 second durations, one caption each and nothing else, so the whole project runs for 6 seconds without any pauses, quizes or interactions of any kind. I have used SCORM cloud to view the SCORM calls being made by the package, and it is not reporting completion to the LMS.
I am using the following settings in reporting:
Any help will be really appreciated. Im about to watch http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1775550&loc=en_us to see if that can help. My backup plan is to put an interaction on the last slide but that's going to mess with my quiz results for the projects that do include quizzes (This is also why im reporting Quiz Results and Slide Views).
Note: with these settings, passing a quiz causes the captivate to report completion.
Thanks for any help
Andrew Downes

I'm not sure of this and defer to any contrary/additional replies that may follow...but...
Past versions of CP have required some sort of scored interaction in order for the lesson to properly report via SCORM to the LMS.
If you have a CP lesson without any scored interactions (no 'reporting'), that may be why completion is being recorded to the LMS.
SO try setting up one scored interaction as you suggest.
For CP lessons that do have quizzes, you won't need that separate scored interaction.
You'll also likely want to change you settings to just 'Slide Views Only' if you just want completion reported based on them viewing the whole project, and I suspect Slide View Completion should be 100, not 10...
Let us know how that goes...
Erik

How to do prevent users from skipping slides?

Hi, I’m an Adobe Captivate noob, so I’d really appreciate some help.
I want to lock the user’s navigation option, in such a way that if the user hasn’t finished a slide yet, he or she will not be able to proceed to the next slide or to other slides in the project. How do I do this? Is this even possible? If yes, what are my options?
I’m using Adobe Captivate 4.
Thanks in advance!

Hello,
Why should you be ignored? We all once were 'rookies' and this forum with his fine moderator, Captiv8r. Experienced users have helped me a lot when I was starting with Captivate
If you only deactivate the Next button in the playbar, wouldn't that achieve your goal? But of course, the user could just drag the slider to skip in that case. If you want complete control, you will have to create your own navigation on the slides I think. Add a Back and an Next button, but set the Next button on the timeline of the slide very late on that slide. Just tried this: slide has a duration of 3sec. I created a Next button, with Success action 'Go to next slide' and changed the Timing settings:
appear after 2.9sec
duration = 0.1sec
pause after 0.1sec
The button will appear when the playhead reaches almost the end of the slide and will have this slide paused until the user clicks.
You will need a Back button with more default settings.
Lilybiri
PS: sorry, had to look for your version. You can easily copy this button, the select all the slides in the filmstrip and paste it on all. The timing and the success action will be the same on all slides.

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others.

How to adjust the size of the slide in keynote to 7.5 feet high x 3.1 feet wide?

How to adjust the size of the slide in keynote to 7.5 feet high x 3.1 feet wide?

Keynote is not designed to produce printed media, it is set up is for video. There are dozens of applications that are designed for printed output on the Mac, Pages, Word, In design, Quark, Open Office, Libra.
Pages is the accompanying application in the iWork suite that is specifically designed to print to paper, you should look at that first as it May be on your Mac already.

How to set slide as completed on slide start?

Similar Messages

Maybe you are looking for