How to set  state-manager ? need to help!

In my App I use Myfaces1.2.6 + RichFaces3.3.0, the <state-manager> setting in faces-config.xml which is right?
NO.1:
<state-manager>org.apache.myfaces.application.jsp.JspStateManagerImpl</state-manager>NO.2:
<state-manager>org.ajax4jsf.application.AjaxStateManager</state-manager>And what is different between NO.1 and NO.2 , and do not set anything in <state-manager>?
Edited by: ben_gan on Mar 12, 2009 3:18 AM

1 will use MyFaces' state manager.
2 will use Ajax4jsf's state manager.
No setting will likely pick up the default setting, which is most probably the MyFaces state manager.

Similar Messages

  • I am setting up a new iMac and need help syncing files to Dropbox.  On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox.  I can't remember how I set this up.  Any help?

    I am setting up a new iMac and need help syncing files to Dropbox.  On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox.  I can't remember how I set this up.  Any help?

    The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
    You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
    Matt

  • How to set Solution Manager mail the EWA reports

    Could anyone suggest me how to setup email for getting EWA report

    Hi Bill,
           1. I would assume you have already configured Early Watch to report to Solution Manager.
            2. SCOT configuration done and e-mails can be sent out.
            If so,
           Go to --> Solution_Manager --> and Go to the solution --> Edit --> Automatic E-mail transmission
           and give the e-mail addresses there.
    Hope this helps,
    Regards,
    Krishna

  • How to Set Individual Managed Metadata Navigation Links to Open in New Window?

    I am using a managed metadata term set for the global navigation in my client's site. Most of the global navigation links point to pages in the current site, and should open in the current browser window/tab as the end user is just navigating within the
    site content. However, I have one particular node in the navigation term set that points to related content scattered around other external sites. The client wants these links to open a new window.
    Unfortunately, I can't seem to set the target for navigation links in the term set. If I was using standard global navigation, I'd be able to select the "Open in new window" checkbox when setting up the link, but that option doesn't appear to be
    supported via MMD navigation.
    Any clever suggestions?
    Thanks!

    I had a similarish requirement at a client once upon a time, they wanted any links that went outside of the intranet web applications to open in a new window.
    The way we managed that was to use jQuery to overwrite the standard hyperlink references for any hrefs that didn't point to internal sites to use the same javascript functions that SharePoint used for links configured to open in a new window. It worked out
    as being about half a dozen lines; check the URL and if it doesn't begin with a set range of options then overwrite the on click behaviour using standard jQuery behaviour.
    If you want it site wide then you just add jQuery and the code snippet to the master page, if you just want it in some places then add a CEWP or a HTML form web part to the relevant pages.

  • Every time I go to a new site, I also get "How to set the home page: Firefox help. How do I stop this?

    This is a Firefox help page that I didn't request, nor do I need.

    You can use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
    If you do not keep changes after a restart or otherwise have problems with preferences, see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • Sapxpg  program core_dump,   how can I do?  need your help

    In my AIX system ,  I get such an error:   
    I do not know what can I do ?     do you have any advise?    thanks
    LABEL:          CORE_DUMP
    IDENTIFIER:     A63BEB70
    Date/Time:       Sun Jul 13 07:01:34 2008
    Sequence Number: 3823
    Machine Id:      00C0EEEC4C00
    Node Id:         KS1DSDB1
    Class:           S
    Type:            PERM
    Resource Name:   SYSPROC
    Description
    SOFTWARE PROGRAM ABNORMALLY TERMINATED
    Probable Causes
    SOFTWARE PROGRAM
    User Causes
    USER GENERATED SIGNAL
            Recommended Actions
            CORRECT THEN RETRY
    Failure Causes
    SOFTWARE PROGRAM
            Recommended Actions
            RERUN THE APPLICATION PROGRAM
            IF PROBLEM PERSISTS THEN DO THE FOLLOWING
            CONTACT APPROPRIATE SERVICE REPRESENTATIVE
    Detail Data
    SIGNAL NUMBER
              11
    USER'S PROCESS ID:
                    438672
    FILE SYSTEM SERIAL NUMBER
              17
    INODE NUMBER
               9
    PROCESSOR ID
               6
    CORE FILE NAME
    /usr/sap/PRD/DVEBMGS00/work/core
    PROGRAM NAME
    sapxpg
    STACK EXECUTION DISABLED
               0
    ADDITIONAL INFORMATION
    Unable to generate symptom string.
    Stack is unusable.

    here is the content of file:dev_cp    ,    I do not know whether there are any problems?   and my sapxpg generated core_dump in 07:00 AM,    I can not find any record at the time 07:00 AM,
    Trace file of control program (trace level 3)
    < Function: BtcTrcInit> Function: main  SAPXPG 640
    2008-07-13--15-00-21 : Before BtcXpgDetach
      > Function: BtcXpgDetach    Can't detach from process group (already leader)
      < Function: BtcXpgDetach  Accept RFC connection from R/3 system
    2008-07-13--15-00-21 : Before RfcAccept
    2008-07-13--15-00-21 : RfcAccept returned OK
    security check switched OFF
      Install RFC call SAPXPG_START_XPG
      Install RFC call SAPXPG_START_XPG_LONG
      Install RFC call SAPXPG_END_XPG
      Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
    2008-07-13--15-00-21 : Before first call of RFCDispatch
      > Function: BtcXpgStartXpg   
    2008-07-13--15-00-21 : Beginning of BtcXpgStartXpg
        > Function: BtcXpgStartXpgImport      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgTable      < Function: BtcXpgTable    < Function: BtcXpgStartXpgImport    > Function: BtcXpgStartXpgInt      > Function: BtcXpgItTransfer        Content of source log table:
              Line  Text
              <No StdOut/StdErr output reported>
            Target log table is not identical to source
            ItGetLine terminated with NULL
          < Function: BtcXpgItTransfer      > Function: BtcTrcReset        Trace level reset to 3
          < Function: BtcTrcReset      Call mode: VIA RFC
          Input arguments of BtcXpgStartXpg:
            External program: brarchive
            Program argument string:  -u / -c force -p initPRD.sap -cds
            Contents of control flags:
              StdIn control flag: redirect StdIn
              StdOut control flag: store StdOut output in memory
              StdErr control flag: store StdErr output in memory
              Trace control flag: trace level 0
              Termination control flag: control program will wait for termination
          > Function: BtcXpgCheck        > Function: BtcXpgArgv          Scanned parameter 1: -u
              Scanned parameter 2: /
              Scanned parameter 3: -c
              Scanned parameter 4: force
              Scanned parameter 5: -p
              Scanned parameter 6: initPRD.sap
              Scanned parameter 7: -cds
              Total number of arguments scanned: 7
              Argument argv[0]: brarchive
            < Function: BtcXpgArgv      < Function: BtcXpgCheck      > Function: BtcXpgSigInst        set signal handler for SIGCHLD to SIG_DFL
            old signal handler for SIGCHLD: SIG_IGN
          < Function: BtcXpgSigInst      > Function: BtcXpgStart        > Function: BtcTrcInit        Process id: 442864
            Parent process id: 233906
          < Function: BtcXpgStart      Start status of external program: external program successfully started
          Id of external process: 0000930102
          StdOut/StdErr collected in memory
            Line  Text
            <No StdOut/StdErr output reported>
        < Function: BtcXpgStartXpgInt    > Function: BtcXpgStartXpgExport      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam    < Function: BtcXpgStartXpgExport   
    2008-07-13--15-00-21 : End of BtcXpgStartXpg
      < Function: BtcXpgStartXpg 
    2008-07-13--15-00-21 : After first call of RFCDispatch
      Wait for RFC call SAPXPG_END_XPG
    2008-07-13--15-00-21 : Before second call of RFCDispatch
      > Function: BtcXpgEndXpg   
    2008-07-13--15-00-21 : Beginning of BtcXpgEndXpg
        > Function: BtcXpgEndXpgImport      > Function: BtcXpgTable      < Function: BtcXpgTable    < Function: BtcXpgEndXpgImport    > Function: BtcXpgEndXpgInt      > Function: BtcXpgItTransfer        Content of source log table:
              Line  Text
              <No StdOut/StdErr output reported>
            Target log table is not identical to source
            ItGetLine terminated with NULL
          < Function: BtcXpgItTransfer      > Function: BtcXpgReadChild        Read returns 28 bytes
            > Function: BtcXpgLog          Log message (27 byte): BR0002I BRARCHIVE 6.40 (15)
            < Function: BtcXpgLog        Read returns 79 bytes
            > Function: BtcXpgLog          Log message (78 byte): BR0006I Start of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.21
            < Function: BtcXpgLog        Read returns 113 bytes
            > Function: BtcXpgLog          Log message (112 byte): BR0477I Oracle pfile /oracle/PRD/920_64/dbs/initPRD.ora created from spfile /oracle/PRD/920_64/dbs/spfilePRD.ora
            < Function: BtcXpgLog        Read returns 1 bytes
            > Function: BtcXpgLog          Log message (0 byte):
            < Function: BtcXpgLog        Read returns 55 bytes
            > Function: BtcXpgLog          Log message (54 byte): BR0013W No offline redo log files found for processing
            < Function: BtcXpgLog        Read returns 183 bytes
            > Function: BtcXpgLog          Log message (0 byte):
            < Function: BtcXpgLog        > Function: BtcXpgLog          Log message (76 byte): BR0007I End of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.27
            < Function: BtcXpgLog        > Function: BtcXpgLog          Log message (49 byte): BR0280I BRARCHIVE time stamp: 2008-07-13 15.00.27
            < Function: BtcXpgLog        > Function: BtcXpgLog          Log message (54 byte): BR0004I BRARCHIVE completed successfully with warnings
            < Function: BtcXpgLog        Process executing external program has terminated
          < Function: BtcXpgReadChild      > Function: BtcXpgEnd        > Function: BtcXpgLog          Log message (44 byte): External program terminated with exit code 1
            < Function: BtcXpgLog      < Function: BtcXpgEnd      Termination status of external program: program terminated with error code 1
          StdOut/StdErr collected in memory
            Line  Text
               1  BR0002I BRARCHIVE 6.40 (15)
               2  BR0006I Start of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.21
               3  BR0477I Oracle pfile /oracle/PRD/920_64/dbs/initPRD.ora created from spfile /oracle/PRD/920_64/dbs/spfilePRD.ora
               4 
               5  BR0013W No offline redo log files found for processing
               6 
               7  BR0007I End of offline redo log processing: adyivkpp.cds 2008-07-13 15.00.27
               8  BR0280I BRARCHIVE time stamp: 2008-07-13 15.00.27
               9  BR0004I BRARCHIVE completed successfully with warnings
              10  External program terminated with exit code 1
        < Function: BtcXpgEndXpgInt    > Function: BtcXpgEndXpgExport      > Function: BtcXpgParam      < Function: BtcXpgParam      > Function: BtcXpgParam      < Function: BtcXpgParam    < Function: BtcXpgEndXpgExport   
    2008-07-13--15-00-27 : End of BtcXpgEndXpg
      < Function: BtcXpgEndXpg 
    2008-07-13--15-00-27 : After second call of RFCDispatch
    2008-07-13--15-00-27 : After call of RfcClose (wait)
    < Function: main
    2008-07-13--15-00-27 : End of SAPXPG: main

  • I used to be able to view the album artwork bottom left before I updated the software recently, and cannot establish how to set this up again.  Help !!

    Before downloading the latest version of I-Tunes, I used to be able to view the ALBUM ARTWORK at bottom left when clicking on a song.
    I am now unable to see the artwork.
    Is it no longer possible with the updated software ??

    Correct, Apple have removed that feature. However, you can still see the artwork of the song that's playing; it's shown in the Now Playing indicator at the top of the iTunes window. It is small, but if you click on it, a larger version pops up.
    Also, in Albums View, you can see the album artwork.

  • How to set credit limit on Agent

    Hi All
    In My scenario  Liability is generated on Customer but i want to consider agent as well for credit limit.
    As i know credit limit is set on the payer partner function but here i have created Agent as a partner function who is not the payer.
    How to set credit management settings on agent.
    Do i need to take help of an Abaper for this.
    regards
    Prabhakar

    hi,
    this is to inform you that,
    what is the business logic on the same. please let me know.
    1. if your customer as well as Agent is one and the same that means customer then you can have credit limit on the same as per your requriment.
    2. if your AGENT is not playing a role of a customer but a partner then speak to your ABAPER by giving PARTNER INDEX NUMBER which will generate on including the AGENT in the sales order.
    3. please ask your whether it is not possible or not:
    3.1. create a Z table with maintaince views with the list of partner's to consider for credit limit.
    3.2. assign or link this Z table to the credit limit creation program or include.
    please check and confirm
    balajia

  • Use State Management for Savepoints

    Hello
    i read a topic in the oracle adf 11.1.2 developer guid about Use State Management for Savepoints the Topic index is 43.9.1 How to Use State Management for Savepoints
    have any one try a sample based on it plz
    regads mohammad j.b.yaseen

    Hi,
    have a look at page 6 of http://www.oracle.com/technetwork/developer-tools/adf/learnmore/007-cancelform-savepoint-169126.pdf
    "Explicit ADFm Savepoints in ADF Task Flow"
    Frank

  • TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

    Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

    search google for "iphone remove picture from contact"

  • Need you help !!! -- How to set PACKAGE SIZE in CURSOR?

    Dear experts:
    Does anybody know how to set the package size if you use cursor in your abap program?
    My scenario is to select all the data from MARA table in which the data volumn is very big, and then process for some specific logic. When I try to select them into one internal table or use CURSOR without package, my abap program will abort after running for around 1 hour. So I was thinking if I can use cursor and set the PACKAGE SIZE like 10,000 and process the data by batch.
    Here is my sample code:
    OPEN CURSOR: CUR_MARA_TBL FOR
    SELECT * FROM MARA.
    DO.
    FETCH NEXT CURSOR CUR_MARA_TBL INTO CORRESPONDING FIELDS OF WA_MARA_TBL.
    IF sy-subrc = 0.
    ......Detail logic......
    ENDIF.
    ENDDO.
    I would appreciate if anybody can let me know how to set the package size based on the sample code above, or any webpage/article about that.
    Any reply would be appreciated and thank you all in advance!
    Best Regards.
    Tim
    Moderator message: please study F1 help for FETCH statement.
    locked by: Thomas Zloch on Sep 8, 2010 4:10 PM

    The Spark List's layout property has the requestedRowCount and requestedMinRowCount properties.
    You can either set a new layout property on your List like this:
    <s:List>
            <s:layout>
                <s:VerticalLayout requestedMinRowCount="1" />
            </s:layout>
        </s:List>
    or reskin the List and modify the VerticalLayout in your copy of ListSkin.
    Jason

  • Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen.  Need some help here.

    Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor.  Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen.  Need some help if anyone else has run into this problem.

    You should contact Microsoft for Mac Support  and/or post in their forums.

  • Help needed quick!!! How to download a management cockpit?

    Hello all,
    In three hours I have to give a presentation on a demo of a management cockpit I build. I would like to download the management cockpit and burn it on a cd so the participants can take it home.
    How to download a management cockpit?
    I know you can download a balanced scorecard so I hope this is possible.
    Thanks in advance.
    Ralph

    Ralph,
          You cannot download the CPM MC app as a offline application.The Balance scorecard can be downloaded into an offline application. The only thing thats possible is to use the print functionality of CPM MC.You can use this with the flag measure defination switched on and also set all the required exception settings(red,green,yellow..) and download all the walls,views and frames into a spool file.
    Hope that helps..

  • New to Apple - Need help.  Here is the breakdown. I just got my wife a iPhone 4s and I'm trying to decide how to set it up. Should she get her own Apple ID or use mine? This for some reason is very confusing to me.

    Here is the breakdown.  I just bought my wife a new iPhone 4s and I'm trying to decide how to set it up for her.  Should she have her own Apple ID or use mine?  If she uses my Apple ID, will that cause issues with iMessage - say when I'm chatting with someone else and vice a versa. Will our messages show up on each others devices?  How will a FaceTime call work?  Will the video call come across both our devices (ipad also)?
    Just some information that might be of note:
    I have the new iPhone 4s, iPad2 and one iTunes account - the iTunes account is my Apple ID which I use also for the iCloud (I think...it's getting murky
    What am I trying to achieve is having the ability for me (iphone, ipad) and my wife (iphone) to be able to share and sync just music, apps, movies, etc...  I have Google Calender and I have not made up my mind yet if we will share a contacts list (I have large business list).  Also this might be of note, I most likely will be using iTunes on my LG LCD TV (appleTV) at some point in the near future.
    So, basically I'm confused, which is not unusual for me.  If I'm thinking to much inside the box, please let me know and feel free to offer up any suggestions.  Even if the suggestion is I'm not asking the right questions.  Of course if that is your suggestion, then please tell me the question.  And an answer would be nice to. 
    Thanks.
    Bentley

    No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
    As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

  • HT1338 my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8.  How do I get that?  When I run a software update, system says there is none.  Help

    my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8.  How do I get that?  When I run a software update, system says there is none.  Help

    Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
    (73181)

Maybe you are looking for