How to setup Cisco spa112 on Vdsl modem

I've had a problem with my spa112 ever since I moved to vdsl.Calls Are ended After 35 seconds.sometimes l cant dial and get call.Any help?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
int range g1/0/17 - 48 , g2/0/1 - 48 , g3/0/1 - 48

Similar Messages

How to setup Cisco IOS with multi public IP's

I'd like to set up a little network environment. We have bought 2 different subnet from our ISP.
The WAN internet connection: xx.yy.81.61/26
WAN gateway: xx.yy.81.1
First subnet : xx.yy.81.80/30 (this has the same first 3 octet as the WAN, probably doesn't count, because it is a different subnet)
Second subnet : zz.uu.156.48/29
As you can see in the first diagram, the xx.yy.81.61/26 is assigned to the CISCO's outside(WAN) interface, the internet connection is alive, all hosts in LAN have internet connection. We want to assign some hosts with public IP address (for webserver sake). I'm not familiar with networking, so please forgive me if I make some silly questions. In brackets, I make the cisco router setup with the "Cisco Configuration Professional 2.8" PC program.
|
| ADSL or Optical cable (fiber link)
|
+-----+
| | modem
| |
+-----+
|
| WAN (xx.yy.81.61/26)
| Gateway(xx.yy.81.1)
|
+----------+
| |
| | CISCO 881 (router/firewall)
| | IOS 15.2(4)M6
| |
+----------+
|
|
-----+------------- our local LAN segment (vlan)
10.10.10.1/24
I want to set up the CISCO:
- The question is, that how can i make my subnets alive? I just want to transmit(NAT) some public IP from subnet to specific HOST computer(or inverse?). I have made the NAT rules (zz.uu.156.50 <- 10.10.10.xxx), but no result, the public IP is unreachable(no ping, no traceroute).
- Do I have to assign a second IP(virtual) address from subnets to the outside interface(WAN). If yes, than how? Or my ISP has to route the subnets to my WAN IP address(xx.yy.81.61) ?
The truth is that the original setup was different, as you can see in the second diagram. In this case the both subnet was alive. Now, I unmounted the ISP owned HP router and I attached the CISCO directly to the modem output(first diagram), because we had some DNS issues and I think it is unnecessary to be 2 router sequentially. Please indicate if i was wrong.
I mention, that by the original setup, I could access the HP router (only the login interface) from internet with the first IP of the subnets (xx.yy.81.81 from the first subnet and zz.uu.156.49 from the second subnet).
|
| ADSL or Optical cable (fiber link)
|
+-----+
| | modem
| |
+-----+
|
|
|
+-------+
| | blackbox, no acces
| | ISP owned HP router
| |
+-------+
|
| WAN (xx.yy.81.82/30) or WAN (zz.uu.156.50/29)
| Gateway(xx.yy.81.81) Gateway(zz.uu.156.49)
|
+----------+
| |
| | CISCO 881 (router/firewall)
| | IOS 15.2(4)M6
| |
+----------+
|
|
-----+------------- our local LAN segment
10.10.10.1/24
Thanks for any answer or suggestion!

Hey,
Proxy-ARP should take care of this!
As long as you assign the NAT rules into the IOS Router it should start replying to any ARP request to those IPs on different subnets.
Of course the ISP should forward this ARP requests to you!
So make sure Proxy-ARP is enabled in the WAN interface and you should be good to go (as long as the NAT rules are good).
Regards,
Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2-CCNP, JNCIS-SEC
For inmediate assistance hire us at http://i-networks.us

How to setup a static multicast ARP entry with Cisco SF300-08?

We're running a cluster in multicast mode as a loadbalancer.
We have Cisco SF300-08 and when we adding a static ARP entry results in an error message telling the user that the hardware address needs to be a valid unicast MAC address.
So how to setup a static multicast in Cisco SF300 or maybe someone know other solution to setup multicastes mode in Cisco SF300.

Hi, Tom!
We have two watchguard xtm505(cluster active-active) in our network. Watchguard interfaces have one ip and one mac adresses. IP 192.168.111.1(Unicast) and MAC 01:00:5e:02:02:03(multicast). Cisco SF300 is router to outside networks(to internet). Cisco IP adresss is 192.168.111.254. There are another some hosts in this network.
Ping from hosts to 192.168.111.254 works well. Ping from hosts to 192.168.111.1 works well too. But there is no ping from watchguard cluster(192.168.111.1) to Cisco(192.168.111.254). And there is no routing to internet
This is well-known situation. We need to do following(example for cisco 3750):
1.    Start the Cisco 3750 command line interface.
2.    Add a static ARP entry for the multicast MAC address of the FireCluster interface.
Type this command:
arp arpa
For this example, type:
arp 192.168.111.1 01:00:5e:02:02:03 arpa
3.    Add an entry to the MAC address table.
Type this command:
mac-address-table static vlan interface <#>
For this example, type:
mac-address-table static 01:00:5e:02:02:03 vlan 1 interface gi1/0/11
But we can't add arp entry on Cisco SF300. CLI tells us "MAC address illegal"!
We tried enable igmp snooping, but is not helps.
Could you tell more detailed about MAC groups?

BlackBerry Curve 8320 : How to setup the Wifi connection like a modem with a laptop.

hello All,
I have a BB Curve 8320 and It's already setup tu use the modem throught my provider : Tethered modem capability
What I ant it's use the Wifi connection like a modem with my Laptop.
Do you know how i can do that.
In advance many thanls and sorry for my poor english.
Regards,
Jean-Achille.

Instructions for using your BlackBerry as a Tethered Modem can be found here.
You should check with your Carrier before doing this as many charge very high fees for this use without a plan, and it's pretty expensive even with a plan.
Jerry

How to setup dialup internet connection(PPP) in Solaris for ADSL modem

I ,m new to Solaris. How to setup dialup internet connection(PPP) in Solaris for ethernet ADSL modem? will solaris recognise the ethernet modem?? I only have windows drivers for the ethernet modem. Where to look for info on this?

The setting you set in IE also affects Firefox. For example, if you set the following, then when Firefox makes a connection request to Windows, Windows is supposed to dial the connection:
Windows Control Panel > Internet Options > Connections or <br>
Internet Explorer Tools menu > Internet Options > Connections
"Dial whenever a network connection is not present"
Source: [[How to make Firefox automatically dial up]]

How to setup QoS for IP/Mac Address WRVS4400N

I need some help setting up QoS for two Cisco/Linksys devivces on my network.
Network devices are Comcast SB6120 modem into WRVS4400n (v2.0.2.1 firmware) that divides into one 24 port gigabit Netgear unmanaged switch, 1 port into AT&T Cisco Microcell, 1 port to HP Officejet 7700 wired printer. Unmanaged switch has approx 10 devices attached (including another 8 port unmanaged gigabit switch). 3 static leases are defined for the network for three devices (HP OJ 7700 printer, Cisco/Linksys PAP2 VOIP adapter, windows home server v1. DHCP is handled by WRVS4400n. Comcast service provides 12mbps of service upstream, 4mbps downstream.
Need to setup QoS for AT&T Microcell and PAP2 VOIP adapter. The real issue that I can't figure out how to configure is IP based priority access. I can do rate control for an IP address but can't figure out how to specify priority control for an IP.
Here are my the current config questions:
1. Bandwidth management page: For the microcell device plugged into port 1, do i set the default CoS to 4 or 1?
2. Bandwidth management page: Should the bandwidth management type be set to priority? I assume yes since I need to define the UDP/TCP ports for priority. The major issues here are
a) one of the ports the Microcell uses is secure https (TCP 443) which is could also be used by any other internet device.
b) can't specify priority for the PAP2, since it's behind the unmanaged 24 port switch
3. QoS setup page: Do I need just 2 queues (one for the port ID for the Microcell and one for the IP address of the Linksys adapter)?
4. QoS setup page: I assume I need to define DSCP for the unmanaged switch but not sure how to tie a queue to an IP address
4. QoS setup page: Shoud priority 0 be set for the most important queue (microcell) and the priority 1 CoS be for the VOIP adapter? Again, not sure about how to define priority by IP address.
5. DSCP setup page: As far as I can find, there's no documentation on how to setup this page.

That's what I do. I keep it simple, one calendar, one set of contacts.
iCloud is really the simplest way to go, as it will sync your (eventual) single Contacts and Calendar across all your devices.
I would:
Figure out which single calendar (in Calendar.app) and contacts (in Contacts.app) that you want to keep.
I'd make a backup of each one. For example,
in Contacts, File > Export... > Contacts Archive...
in Calendar, File > Export... > Calendar Archive...
Make a backup of the other calendar events and contacts that you want to save.
delete all the contacts and calendars from your phones and your iPad.
add the contacts and events from the backups to the single calendar in Calendar.app and your contacts in Contacts.app on your iMac. There is probably some way to export the contacts and events you are adding, and then combine them, but you could also just add them manually.
Then when you configure all your devices for iCloud, they will be all synced automatically.
Message was edited by: arthur

TC in Bridge Mode with ISP router vs TC as Ethernet with VDSL modem

Hi, I have a time capsule. It's the newest generation of the old shape/design - i.e second to newest version. It's running 7.6.4. firmware.
I recently updgraded my ISP to Fibre VDSL and the ISP sent me a crappy router with a built-in modem that you have to use. I checked the ISP support forums and found plenty of advice to configure the TC over ethernet with this router using the DMZ of the router etc. Anyway, I got it all working but i wasn't happy. port forwarding was a pain and you end up with double NAT issue - not surprising.
The alternative config was to switch the TC to 'bridge mode' so the crappy ISP router does the NAT / DHCP, port forwarding, dpnp, internet routing. I got this all working and i have made sure that all of my network nodes/clients (wired and wifi) are all off the TC and only use the ISP router for internet, dhcp etc. This is all working with good speeds, solid internet access but...
Major issues with airplay (use this a lot) and also with stuff like facetime etc. The connection is much faster (40mbps down/10mbps up) than my old ASDL setup but as I said, key services that I use are not as stable.
I think my only alternative solution is to buy a VDSL modem seperately and use the TC as the router i.e. go back to my old config with TC doing all the routing, port forwarding etc.
Does anyone here have a view as to whether this is worth trying? I'm hoping that it if the TC is doing all the routing, I will get less drop outs and services will work as they should. On the other hand, I hoped airplay would be OK as it's a wifi/Lan service rather than WAN but I have had quite a few issues.
Appreciate any help with this and sorry for the lengthy note!
Jata.

In theory, you will do better by using a simple bridge mode modem and then setting up the Time Capsule as the router to provide DHCP and NAT services.
But, as you might imagine, it is not possible to predict whether your results will actually be better using this type of setup.
Worth a try, in my opinion, if you can find a store that will let you return the modem for credit if it does not do what you want.
Even a simple modem will still likely have to be configured to operate in bridge mode, but the setup should only take a few minutes using the web based configuration interface.
Let us know how things are working if you can, if you decide to the try the simple modem approach.

How to setup TC with ethernet to existing router.

Hi,
What I am trying to do is use TC strictly as a backup device for time machine.
I am trying to do the follwoing setup.
I want to connect tc to my wireless router using ethernet cable(so my time machine backups do not take days). After doing this, Airport utility will only recognize the TC if my mac has WIFI enabled. How do I force it such the TC is only using the ethernet and not WIFI.
Thanks and I look forward to your reply.
...Bruce

Hi, I'm actually researching to see if a TC will be a good choice for my configuration, I have the following hardware:
Alcatel 3Ve.A2010TEL VDSL Modem
Linksys EA4500 router
iMac (1TB HD)
MacBook Pro (500GB HD)
Mini Server (500GB HD)
MacBook (250GB HD)
MacBook Air (128GB Flash)
2 PCs with Windows 7 (250GB HD)
1 Wireless Laser Printer
2 iPad
4 iPhone 5
The iMac, and Mini have external backup disc for Time Machine, but there is not enough capacity for their backups. So I want to know if a 3TB Time Capsul will be a solution for my setup, and if replacing my Linksys EA4500 router is needed or if runing the TC in Bridge mode will do.
Please any suggestion will be helpful before I invest purchasing the TC.
Thanks a lot,
Reinaldo Varela

How to setup my airport for music streaming

Hi all
I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
I have an unused Airport Express basestation (A1408) My current home setup is as follows:
Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
AV Reciever: (Onkyo TX-SR309)
5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
Laptop: Windows 7 (Cat6 LAN Ethernet connection)
My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
I have attached an image of my setup below. Any advice would be great, Regards Steve
[URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]

Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
option 2: Connecting to an existing Wi-Fi network as part of a roaming network
Ensure that the AirPort base station Ethernet cables are connected as above
I have done this and conected it via ethernet cat6 to the modem/router
Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
Regards

How to setup a Class B network with WRT54GX ver. 2

Hi all,
I bought a WRT54GX ver. 2 router. I wanna know how to setup the IP address say 128.1.50.136 with subnet mask 255.255.0.0 (Class B network)? By the way, 128.1.0.0 is my network zone.
If the router can't change, what should I do? Any other router support Class B network?
Thanks!

bcow wrote:
I did but it doesn't work. It seems don't have 255.255.0.0 to select.
would you state more clear of how to do it? Thanks!
It does not have that because it does not support it... the router runs on CLASS C only because it was designed and made for SOHO only... bussiness lines of Linksys or Cisco can do that....but not this router...
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

How to setup the RV120W for quickvpn

Hello,
The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
Thanks for any help

User Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

How to setup remote access with E4200?

Hi,
I am new to this and I need help from you all on how to setup the E4200 so that I can access the media server when I am in office? Is there a guide or step by step procedure on this? I was browsing on the Cisco website and unable to find it.

The purpose of using DDNS is it substitutes the public/WAN ip address provided by your ISP.We all know that the ip address provided by our ISP(if we are not subscribe to a premium static ip address) is basically public and will always change from time to time.So it will be difficult for us to know what's the ip address our ISP has provided us and this will lead us problems accessing our router or ftp server remotely. Thus by using DDNS' it will now allow us to access the router remotely without knowing what's the WAN ip address.

How to setup IIS to play sound ? How to created .raw? Where Doccument?

I programming with IPPhone for 3 ys, but so surprised, there is less more less about how to setup the IIS to test RTP (or something like streaming). Please anyone can help to provide information about this. My customer want to Broadcast a wav file to announce some thing, how can I do it? I search all cisco doc but no any infomr

There are 3rd party software out there which can do a much better job at broadcasting wave file, send live page, text notification, weather alerts, etc.
If you want to develop yourself, you need to use RTPTx, RTPRx and CiscoIPPhoneExecute objects from SDK. To broadcast audio to a multicast, there is also sample code available. The problem is managing the phone list and groups and providing an intuitive interface for users and sys admins. I do have some sample code that we used in PhoneTop Messenger product, but it is all in Java and needs a Windows box to host it.

[RVS4000.v2] How to setup Itemized DHCP addressing

Running RVS4000 on Cable modem.
'Itemized', is probably the wrong word I used in the subject line but this is what I mean:
Some small business type routers allow the user to setup the dhcp addressing so that specific hosts always get the same dhcp address, but I don't see how that might be done on the RVS4000_v2. The router I just quit using was a NETGEAR FVS-318. I ditched it in favor of the RVS4000 just for the gigbit lan ports, and still trying to learn to use it, at least as well as I was able to use the Netgear.
On that Netgear, it was clearly marked and notated how to setup the situation I described above, but I'm not finding anything I recognize in the `lan' settings, on RVS4000 that I can recognize as a way to make that kind of setup.
Is it possible to make the dhcp server, serve the same IP address to a specific host? Can anyone tell me how it is done?

mpyhala wrote:Hi Harry,Thank you for posting. Right under Server Settings (DHCP) in the setup page you should see Static IP Mapping. This allows you to have the DHCP server provide IP addresses based on the MAC address of the client. Each time that MAC address requests an IP address it will receive the same one. Please let us know if this is what you are looking for or if you need further assistance.
Yup, that was what I needed, thanks.
The terms describing that section are pretty confusing.
Static IP mapping
And then the first question with dialog box to fill in is titled
Static IP:{ }
Well, one would expect this to be about assigning Static IPs as its called in several places here.
Though it may actually be a nonsense term, sometihng like like `DHCP derived Static IP', might be a better choice of wording. So the user knows this involves dhcp and not plain Static IP assignment.
But anyway, its what I was after so thanks again.

Need Help Setup Cisco RV042 vpn

good day everyone, a month ago my boss purchase 4 pcs cisco rv042 vpn to be used in our small office and to our satelite office, with expectations of simple file sharing and remote troubleshooting and for better and safe data transfer. since the task is given to me as an IT staff it is difficult to me to setup this vpn router since i have a little idea and many question are on my mind that need to be answered, i read the manual test the vpn router but still no good answered found. i know it is dufficult but with proper guide and step by step on how to use this one i can make it work. please anyone help me i need answers to this questions.
i am using windows 7 pro sp1 64bit for my test unit, how can i make a vpn server? a client?
in the past i connect the internet connection in the internet connection port in the back of the router, then another cable from vpn port 1-4 i select #4 port to connect to my pc, since the vpn give the ip on my pc i can easily connect to the firmware of the vpn using the deafault username and password. when i go to the firmware i dont know where to start, and i dont even have the internet connection for my pc.
i feel sorry for myself beacuse i have no idea in this kind of thing, CISCO people and others out there i am calling for your help.
thank you in advance
mel

Dear Emilio,
Thank you for reaching Cisco Small Business Support Community.
If you’d like to setup a Site to Site VPN on your RV042 here is a good step by step guide;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=304
If you are looking into a remote access VPN, QuickVPN, here is the step by step procedure;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=452
Just in case here is also a document with Windows operating systems tips;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2922
Finally here is a link with the Admin Guide where starting on page 122 you can find everything related to VPN setup on this particular device model, beside info in how to setup your internal network (I suggest you to go through this admin guide so you know everything about the router);
http://www.cisco.com/en/US/docs/routers/csbr/rv0xx/administration/guide/rv0xx_AG_78-19576.pdf
Please let me know if there is any further assistance we may assist you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

How to setup Cisco spa112 on Vdsl modem

Similar Messages

Maybe you are looking for