How to setup NME-AIR-WLC25-K9

Hi Guys,
I have NME-AIR-WLC25-K9 module installed in cisco 3945 , can some one guide me how to access and configure this thing.
Thanks in advance.
Mohseen Patel

Hi,
Here is the configuration example on how to get the WLC up and running..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00807112e2.shtml
here is the FAQs..
http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps6730/prod_qas0900aecd8036443b.html
Lemme know if this naswered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

Similar Messages

Import 5508 Controller Config from NME-AIR-WLC25?

Greetings!
For 3 years now, I've been using an NME-AIR-WLC25 controller with an ever-increasing number of AP's (reaching the 25 limit a few months ago). As part of a new construction project, I'm adding 5 more AP's onto my network. As a result, I purchased a 5508 controller with a 50AP license to get me started.
My question is simple-- is it possible to import the WLC25's configuration to the 5508? I have a feeling the answer is no, but I figure it can't hurt to ask, and if I'm lucky it will save me quite a bit of time configuring this new controller.

Yes, I'm running 7.0.116.0 on the WLC25 today, so that sounds promising.
I've already downloaded the config file from the WLC25, and I did notice it looked pretty basic command-line, so I was certainly hoping that to be the case.
If the 5508 firmware is newer (I haven't even unboxed it yet), do you expect I'd run into trouble importing the old config, or should I version match first, import, then upgrade to latest?
Any other gotchas I should look out for in doing this?

How to setup iPad air with apple id?

Our setup - Mac Pro 2009 model at home. My wife and I each with our own iphone. We both share the same Apple ID in order to use the same purchased music, apps, etc.
She just got an Ipad air yesterday and we're trying to setup imessage on the ipad. If she enters in my email address associated with our shared apple ID - message sent by her appear from me. So we added her email address as an additional email - now messages from her come under her name and also under the phone number associated with the apple id.
what is the solution to have imessages from her Ipad come from her?

is it aol id for apple as make sure you've selected that. other wise contact apple as get them to sort it,

Will a NME-AIR-WLC25-K9 bolt onto existing infrastructure?

Interested in facilitiating the ability for the receptionist (or anyone for that matter) to be able to create a day pass for guest wireless access. The idea being that the guest would receive a pass that allows them access to a site's <20 access points for a predetermined amount of time, in this case the business day providing a path to an dedicated guest Internet circuit.
1) Is this NM able to be added to the existing operating environment without completely taking over? in other words can it be added to perform it's function for guest wireless but ignore the current configuration (with limits obviously) and not have issues with changes being made to the APs via other mechanisms?
2) can these NMs be added to an enterprise autonomously at individual sites, in other words in an enterprise filled with APs can there be a few of these that are only responsible for their respective sites/subnets without any conflict?
The VLAN path would be (for example) 1242->3560->4506->3845->I, so I'm guessing that all Cisco means there wouldn't be an issue there, but I'm mentioning it just in case of device limitations
All input feedback welcome; thanks in advance.

Yes, I'm running 7.0.116.0 on the WLC25 today, so that sounds promising.
I've already downloaded the config file from the WLC25, and I did notice it looked pretty basic command-line, so I was certainly hoping that to be the case.
If the 5508 firmware is newer (I haven't even unboxed it yet), do you expect I'd run into trouble importing the old config, or should I version match first, import, then upgrade to latest?
Any other gotchas I should look out for in doing this?

WLAN Clients not browsing on Cisco Wireless Controller WLC NME-AIR-WLC12-K9

HiI have a question and i need a solution and expert help.I have done a deployment which involves Security (ASA5540), Routing/voice gateway/wlc NME-AIR-WLC12-k9) and Switching (Cisco3845-ccme/k9)Below is the list of equipment used:1. Cisco ASA 5540 - which is connected at the edge to the ISP router
2. Core Switch WS-C4948E as core and DHCP Server for all VLANs
3. Access/Distribution Switches WS-C3560G-48PS-S connected as trunk to the core switch
4. Router/Voice Gateway/WLC Cisco3845-CCME/K9 - This is the voice gateway and also the WLC
5. Wireless APs AIR-LAP1242AG-E-K9 (12 qty)Here is the deployment scenario:1. G0/0 of the ASA is connected to a 7200 router from the ISP (Public IP Add)
2. G0/1 of the ASA is connected to gig 1/3 on the Core Switch on VLAN 2 which is the management VLAN (Local IP 10.1.1.2)
3. Port 3 of the Core switch is on vlan 2 connected to ASA - Management IP of Core Switch is 10.1.1.1. Core Switch is the DHCP Server for all VLANS on the network.
4. All the Access/Distribution switches are configured with IP Addresses on VLAN 2
5. Telephony Services is configured on the router and DHCP Pool for Access Points and Wireless Clients is running on the router.
6. Two DHCP pools were created on the router for APs and Wireless Clients.
7. G0/0 of the router is configured on the same network that issues dhcp ip to the AP and is connected to gig 1/1 on the core switch
8 G0/1 of the router is configured as the voice port for the IP Telephony Services and is connected to G 1/2 on the core switch1. Clients receiving DHCP IP on the Core Switch can communicate with all vlans and can browse to the Internet.
2. IP Telephony Services is running well.
3. Client on wireless can get IP from the DHCP on the router but cannot browse.I have pings from the router to the core switch and firewall, but clients connected to the wireless
cannot ping other vlans on the core switch and vice versa.The port connecting the router to the core switch is an Access Port, i have changed to to trunk but still no changes.My biggest problem now is how to make the clients on the wireless communicate with other clients on the network and be able to browse to the Internet.Below is the configs on the router and core switch.Router ConfigNimc_Voice_Router#sh run
Building configuration...
Current configuration : 10513 bytes
! Last configuration change at 13:03:55 Nigeria Mon Nov 29 2010 by admin
! NVRAM config last updated at 13:03:56 Nigeria Mon Nov 29 2010 by admin
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Nimc_Voice_Router
boot-start-marker
boot-end-marker
! card type command needed for slot/vwic-slot 0/2
logging message-counter syslog
enable secret
aaa new-model
! aaa authentication login default local
aaa session-id common
clock timezone Nigeria 1
dot11 syslog
ip source-route
ip dhcp excluded-address 10.1.12.1 10.1.12.10
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp pool LWAAP-AP
network 10.1.12.0 255.255.255.0
default-router 10.1.12.1
option 43 hex f104.c0a8.0002
dns-server 83.229.88.30 4.2.2.2 193.238.28.249
option 60 ascii "Cisco AP c1240"
ip dhcp pool Wireless
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 83.229.88.30 193.238.28.249 4.2.2.2
ip cef
no ip domain lookup
ip domain name nimc.gov.ng
ip name-server 83.229.88.30
ip name-server 193.238.28.249
ip name-server 4.2.2.2
no ipv6 cef
multilink bundle-name authenticated
voice-card 0
archive
log config
hidekeys
interface GigabitEthernet0/0
description Connection to AP
ip address 10.1.12.1 255.255.255.0
ip helper-address 192.168.0.2
load-interval 30
duplex auto
speed auto
media-type rj45
interface Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/1
ip address 10.1.2.2 255.255.255.0
duplex auto
speed auto
media-type rj45
interface FastEthernet0/0/0
no ip address
shutdown
duplex auto
speed auto
interface Serial0/1/0
no ip address
shutdown
no fair-queue
clock rate 2000000
interface Serial0/1/1
no ip address
shutdown
clock rate 2000000
interface Integrated-Service-Engine1/0
ip address 192.168.0.1 255.255.255.0
no keepalive
interface Integrated-Service-Engine1/0.15
encapsulation dot1Q 15
ip address 192.168.1.1 255.255.255.0
interface Integrated-Service-Engine1/0.100
encapsulation dot1Q 100
ip forward-protocol nd
ip forward-protocol udp 12223
ip route 10.1.0.0 255.255.255.0 10.1.1.1
ip route 10.1.1.0 255.255.255.0 10.1.1.1
ip route 10.1.2.0 255.255.255.0 10.1.1.1
ip route 10.1.3.0 255.255.255.0 10.1.1.1
ip route 10.1.4.0 255.255.255.0 10.1.1.1
ip route 10.1.5.0 255.255.255.0 10.1.1.1
ip route 10.1.6.0 255.255.255.0 10.1.1.1
ip route 10.1.7.0 255.255.255.0 10.1.1.1
ip route 10.1.8.0 255.255.255.0 10.1.1.1
ip route 10.1.9.0 255.255.255.0 10.1.1.1
ip route 10.1.10.0 255.255.255.0 10.1.1.1
ip route 10.1.11.0 255.255.255.0 10.1.1.1
ip route 10.1.12.0 255.255.255.0 10.1.1.1
ip route 192.168.0.0 255.255.255.0 10.1.1.1
ip route 192.168.1.0 255.255.255.0 10.1.1.1
no ip http server
ip http secure-server
!Core Switch Configsh run
Building configuration...Current configuration : 10622 bytes
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
hostname Nimc_Core
boot-start-marker
boot-end-marker!
aaa new-model
aaa authentication login default local
aaa session-id common
storm-control broadcast include multicast
ip subnet-zero
no ip domain-lookup
ip domain-name nimc.gov.ng
ip dhcp excluded-address 10.1.2.1 10.1.2.10
ip dhcp excluded-address 10.1.4.1 10.1.4.10
ip dhcp excluded-address 10.1.5.1 10.1.5.10
ip dhcp excluded-address 10.1.6.1 10.1.6.10
ip dhcp excluded-address 10.1.7.1 10.1.7.10
ip dhcp excluded-address 10.1.8.1 10.1.8.10
ip dhcp excluded-address 10.1.9.1 10.1.9.10
ip dhcp excluded-address 10.1.10.1 10.1.10.10
ip dhcp excluded-address 10.1.3.1 10.1.3.10
ip dhcp pool Voice
network 10.1.2.0 255.255.255.0
next-server 10.1.2.1
option 150 ip 10.1.2.2
default-router 10.1.2.1
dns-server 83.229.88.30 193.238.28.249 4.2.2.2
ip dhcp pool SF_DGs_Office
network 10.1.3.0 255.255.255.0
domain-name nimc.gov.ng
default-router 10.1.3.1
dns-server 81.199.3.7
lease 10
ip dhcp pool Admin_Process_Fac_Mgt
network 10.1.4.0 255.255.255.0
domain-name nimc.gov.ng
default-router 10.1.4.1
dns-server 83.229.88.30 193.238.28.249 4.2.2.2
lease 10
ip dhcp pool SF_IDD
network 10.1.5.0 255.255.255.0
domain-name nimc.gov.ng
default-router 10.1.5.1
dns-server 83.229.88.30 193.238.28.249 4.2.2.2
lease 10
ip dhcp pool Finance_Fin_Inv
network 10.1.6.0 255.255.255.0
domain-name nimc.gov.ng
default-router 10.1.6.1
dns-server 83.229.88.30 193.238.28.249 4.2.2.2
lease 10
ip dhcp pool Finance_CS
network 10.1.7.0 255.255.255.0
domain-name nimc.gov.ng
default-router 10.1.7.1
dns-server 83.229.88.30 193.238.28.249 4.2.2.2
lease 10
ip dhcp pool FF_Human_Capital_Mgt
network 10.1.8.0 255.255.255.0
domain-name nimc.gov.ng
default-router 10.1.8.1
dns-server 83.229.88.30 193.238.28.249 4.2.2.2
lease 10
ip dhcp pool FF_Legal_Services
network 10.1.9.0 255.255.255.0
domain-name nimc.gov.ng
default-router 10.1.9.1
dns-server 83.229.88.30 193.238.28.249 4.2.2.2
lease 10
ip dhcp pool SF_Procurement_Serv
network 10.1.10.0 255.255.255.0
domain-name nimc.gov.ng
default-router 10.1.10.1
dns-server 83.229.88.30 193.238.28.249 4.2.2.2
lease 10
ip vrf mgmtVrf
errdisable recovery cause bpduguard
errdisable recovery interval 180
power redundancy-mode redundant
spanning-tree mode mst
spanning-tree portfast bpduguard default
spanning-tree extend system-id
spanning-tree mst configuration
name xxxx
revision 1
instance 1 vlan 1-20
spanning-tree mst 1 priority 0
spanning-tree vlan 1-20 priority 0
vlan internal allocation policy ascending
interface FastEthernet1
ip vrf forwarding mgmtVrf
no ip address
speed auto
duplex auto
interface GigabitEthernet1/1
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet1/2
switchport access vlan 4
switchport mode access
spanning-tree portfast
interface GigabitEthernet1/3
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/4
switchport mode access
spanning-tree portfast
interface GigabitEthernet1/5
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/6
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/7
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/8
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast!
interface GigabitEthernet1/9
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/10
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/11
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/12
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/13
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/14
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/15
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/16
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/17
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/18
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/19
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/20
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/21
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/22
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/23
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/24
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/25
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/26
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/27
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/28
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/29
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/30
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/31
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfastinterface GigabitEthernet1/32
switchport access vlan 2
switchport voice vlan 4
interface GigabitEthernet1/33
switchport mode access
interface GigabitEthernet1/34
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/35
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/36
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/37
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/38
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/39
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/40
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/41
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/42
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/43
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/44
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/45
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/46
switchport access vlan 2
switchport mode access
switchport voice vlan 4
spanning-tree portfast
interface GigabitEthernet1/47
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet1/48
switchport trunk encapsulation dot1q
switchport mode trunk
interface Vlan1
no ip address
shutdown
interface Vlan2
description Management
ip address 10.1.1.1 255.255.255.0
interface Vlan3
description Enterprise
ip address 10.1.0.1 255.255.255.0
interface Vlan4
description Voice
ip address 10.1.2.1 255.255.255.0
interface Vlan5
description SS_DGs_Office
ip address 10.1.3.1 255.255.255.0
interface Vlan6
description Admin_Process_Fac_Management
ip address 10.1.4.1 255.255.255.0
interface Vlan7
description SF_National_Identity_Database
ip address 10.1.5.1 255.255.255.0
interface Vlan8
description Fin_Finance_Investment
ip address 10.1.6.1 255.255.255.0
interface Vlan9
description Fin_Corporate_Services
ip address 10.1.7.1 255.255.255.0
interface Vlan10
description FF_Human_Capital_Management
ip address 10.1.8.1 255.255.255.0
interface Vlan11
description FF_Legal_services
ip address 10.1.9.1 255.255.255.0
interface Vlan12
description SF_Procurement_Services
ip address 10.1.10.1 255.255.255.0
ip default-gateway 10.1.1.2
ip route 0.0.0.0 0.0.0.0 10.1.1.2
ip route 10.1.1.0 255.255.255.0 10.1.1.2
ip route 10.1.2.0 255.255.255.0 10.1.1.2
ip route 10.1.3.0 255.255.255.0 10.1.1.2
ip route 10.1.4.0 255.255.255.0 10.1.1.2
ip route 10.1.5.0 255.255.255.0 10.1.1.2
ip route 10.1.6.0 255.255.255.0 10.1.1.2
ip route 10.1.7.0 255.255.255.0 10.1.1.2
ip route 10.1.8.0 255.255.255.0 10.1.1.2
ip route 10.1.9.0 255.255.255.0 10.1.1.2
ip route 10.1.10.0 255.255.255.0 10.1.1.2
ip route 10.1.11.0 255.255.255.0 10.1.1.2
ip http server
--More--
control-plane
line con 0
stopbits 1
line vty 0 4
end
Please i need somebody to help me

I wouldn't configure an ip address on the service engine subinterface.
Try setting up a vlan interface on the router with that ip address and the subinterface will be linked to the vlan interface through the encapsulation command. A vlan interface will better work as a gateway for the wireless clients
Nicolas

How to setup guest net work in airport extreme

Hi,
i have how to setup guest net work in airport extreme?
i have the airport extreme and the airport base station as a range extantion.
all is workig good :-)/
i the init setup (od the extreme) i setup the router to support also guest network with password.
when i scan the network i canor see the guest network.
also i canot set it up from the air play (win7 sp1)
THX :-)

Mmm, generally you don't need to do much port mapping in an extreme. Not sure I understand you. What does the d-link do?

How do i use air sync to sync with my iTunes on my computer

How do i use air sync to sync with my iTunes on my computer

You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
Use Microsoft SharePoint Workspace Mobile
http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
iPhone SharePoint Apps Shootout
http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx
Comparing SharePoint iPhone Apps
http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
MCTS: Messaging | MCSE: S+M

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

How to setup a static IP for a wireless printer

This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.

You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

How do i get air play to work from my macbook to apple tv

How do i get air play to work from my macbook to apple tv? It does work with some programs like itunes but I can't get it to work with safari.

apple tv does not work in safari. there is no web browsing capabilities on the apple tv..
however what you are probably referring to is mirroring? iPad 2 and iPhone 4s have mirroring capabilities, so what you have on the screen is exactly what would appear in the apple tv..
on ipad for example...ignore the settings page. Instead, go to the iPod controls. Double-press your home button to see the multitasking bar, showing all your recent apps. Swipe your finger from right to left for the mirroring icon; you'll see the AirPlay icon. Tap on that, select your Apple TV and toggle the mirror button to 'on'.

How to setup Charms in a 2 tier landscape ?

Hi All,
We have a two tier landscape i.e only having development and production system so how to setup STMS and all other settings in this type of scenario.
Can we use Virtual system in STMS as a Quality system ? If yes then please guide us and tell me how to proceed as if we dont know how to add virtual system in SMSY in solman. Please provide us with a clear picture and give us detail documentation if possible.

Hi All,
Please tell me as per the SAP standard recommendation is it necessary to have a cycle like DEV->QUAL-PROD for Charms as we are not having any Quality system or Client here in our landscape.
Please suggest a way how to proceed in this case. Please help me out.

How to setup breakpoints in a vector space?

Hi,
How to setup breakpoints in a 2D vector space in NI 7344 and check for them using flex_read_breakpoint_status_rtn?
Thanks.

Hi,
Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
What sort of Screen Names or IDs do you use with that ?
If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
10:38 PM Friday; April 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to setup iChat in a office

How to setup iChat in a office that using Office Communicator as a IM ?

Hi,
Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
What sort of Screen Names or IDs do you use with that ?
If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
10:38 PM Friday; April 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to setup NME-AIR-WLC25-K9

Similar Messages

Maybe you are looking for