How to setup Time to execute eCATT scripts automatically from TestPlan

Hello All,
Iam working on eCATT using SAPGUI 640.All my scripts are SAPGUI recording.I have bunch of scripts.i have created a Testpackage and a TestPlan and moved all my scripts into that TestPlan.
Now,I want all the scripts to get executed from TestPlan in the late evening or on weekends automatically without any manual interaction.
Do we have any solution for the above issue.
I would appreciate all your comments.
Thanks,
Sarapu

Thank you for your comment and suggestion. I will give your suggestion a try. However, it seems the question is still open:
If a user wants to write a program/script that does an scp/rsync that transfers a file from one host to another (assuming the .ssh keys are properly set up), and put it into a launchd process that executes like it would under a cron (i.e., they do not need to be logged in, and it persists after a reboot), how is this accomplished without using the root-level /Library/LaunchDaemon?
Am I miss-informed that a users LaunchAgents are executed only when the user logs in?
At least in the scientific arena, using a cron to transfer files is a very regular practice. It would be a major headache if the system administrator had to manually add each users launchd files to /Library/LaunchDaemon

Similar Messages

Executing .sql scripts file from command prompt

I had created the .sql scripts for
--Create Database
--Create tables
--Create Stored procedure
I am using SQL server 2008.
Now i want to deploy it into the target server using the command prompt.
How can I call to execute that script on the target server?

with few errors as "Incorrect Syntax near "GO"".
Hello,
GO is a command, which is only known & interpretted by SSMS + SqlCmd.exe; SQL Server engine / data access components don't know this command, therefore you get an error.
See
Query Options Execution (General Page); for SSMS you can change it from GO to any other term.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Runtime Error while executing eCATT Script

Hello @All,
I worte a small eCATT script to stop the time a certain process needs to finish. The way I did this was to use the SAPGui (Record) method in eCATT.
This does work fine.
The second step I tried was to log the time and write it in a table to work with the times.
If I do this I always get an runtime error, I know why it appears but I do not have any idea how to solve this.
My script is:
message ( UZEIT ).
SAPGUI ( CC04_100_STEP_1 ).
SAPGUI ( CC04_1100_STEP_1 ).
endmessage( UZEIT ).
settab ( ypdm1t001, UZEIT ).
UZEIT is an Inputparameter with no reference.
The short text of the runtime error is:
Access not possible using 'NULL' object reference.
If I delete the definition of the parameter UZEIT the runtime error does not appear but I get the error in the Log that the parameter UZEIT is not defined.
Does anyone has a solution for this problem?
greets
manuel

Hi Harsha,
UZEIT is a command interface (I changed it so that is no more an parameter).
There seem to be no restrictions to add values in the table. I already spoke to collegues here and they cannot find a mistake.
I would further try to describe you what I want to do. Perhaps you have better ideas.
What I want to achive is to get an overview over response times of defined transactions.
We have a system landscape with local SAPGUIs and with installations on WTS and we want to compare response times from both sides.
Therefore I made the eCATT skripts.
Now I want to write the times somewhere so that I need not to write them down from every log file.
At this point I wanted to write the times (which should be stored in UZEIT) to a table so that afterwards a report can write those times in an excel file.
If you have better ideas to realize this please tell me.
Thank you in advance for helping me.
greets
Manuel

Executing eCATT Script from Mecury Quality Centre

Hi All,
   1. Is it possible to Save eCATT Test Script in Mercury Quality Centre? If so, How?
   2. Then How to invoke eCATT Script from mercury Quality Centre?
                  or
   3. Can we call eCATT script from QTP?
      If possible, what r the setup requirements and How to call the ecattt script?
Regards,
Sree

Hi Sreedhar,
I cannot help you with you with the first 2 questions.. but I can tell you the integration of QTP & eCATTs.
You can refer an QTP script in eCATTs and not vice versa. You can call a QTP script in eCATTs like this
REFEXT ( SCRIPT , SCRIPT_1 ).
Create a QTP script and name in SCRIPT( anything ) and call the QTP script in eCATTS.
As far as I know, we cannot call an eCATT in QPT. QTP is a third party tool which you can buy outside, but eCATT is a propereitory tool of SAP which you cannot buy alone. So, there in no possibility for this way(as far as my knowledge goes).
Best regards,
Harsha

How to setup TIme capsule with a DSL router step by step?

Hi All,
Does anyone know how to conncet Time Capsule set by step through a DSL router?
I already have a DSL router, but want to connect my time capsule to that router.
Do i connect it through ethernet?, and is it possible to have my time capsule as a different router at home with a different password than the DSL router?, if so how is that possible?, is going to have the same download/upload speed as the DSL router?
Please help, thanks

You simply bridge the TC.
Plug it by ethernet into the adsl modem router and it will work fine.
nd is it possible to have my time capsule as a different router at home with a different password than the DSL router?,
No, the TC will cause trouble if you set it up as a router.. it has to be bridged. You only have a single adsl connection but there are some ISP that allow a secondary pppoe login and some modems that allow it. It is pretty difficult setup. Ask your ISP as there is often a charge that is very high for the second connection. It will still share the same link so there is no improvement in speed, merely two different authentications sharing the same line. The TC can do pppoe client but has nothing very fancy about it.

How to setup Time stamp for CO-PA.

Hello Friends,
I have created CO-PA datasource in KEB0. Defaultly, the delta method has been selected as
'Generic delta'. But, I need time stamp for delta process.
Where can I setup time stamp for CO-PA data source?
Thanks
Sumanth

Hi,
You need not maintain the timestamp for COPA separately.
A generic data source for which delta based on the timestamp is automatically created.
By default the delta for CO-PA is based on timestamp and you need not do it manually.
Once you do an init for this and see an entry in RSA7 for the COPA data source then you check the option delta status in front of the data source...just click on it and it will tell you upon which field the delta for data source is based...you will find that for CO-PA its by default always timestamp.
Thanks
Ajeet

How to setup Time Capsule for wireless backup only

I have a new Time Capsule that I want to set up for wireless backups of both my Macbook Air (with Time Machine) and a Windows Vista laptop. I have an existing home wireless network with my Att/Uverse tv and internet service. I do not want to disturb that network/internet setup.
How do I set up the time capsule to use it for wireless backup only? When I start the Airport utility setup, the first thing it asks is do I want to 1) set up new network, 2) replace existing router, or 3) join existing network.

Thanks. That got me the green light and a message that everything was set up properly. It started it's first Time Machine backup and everything looked good for a while. But now I have a new problem.
The backup failed twice. The first time it had a message that it could no longer find the time capsule, so I had to reset it and go thru the setup procedures again. Started backup again overnight, and this morning it tells me that it failed again. But this time I still have my green light, and the message is "a network problem may have interfered with the backup.
I don't know what else to do with the setup to get it to work. Right now it has started backing up again on its own, so I'll leave it going one more time. (I should tell you that all of this is occurring on my Mac. I have not even started setting it up on the Vista machine. I want to make sure it works on the Mac first). Any advice from anyone who had the same problems with setup would be appreciated.

How to display time took executed on a query.

hi,
i have a long running query, and don't have dba access.
how to show the time it took from the query to display after executing a query?

user1035690 wrote:
great, how come the set timing off has no effect on my SQL developer?
i can't set timing off (or on).
thanks.Because SQLDeveloper is not SQLPLUS?
That's like asking why does my motorbike have 2 wheels when my car has 4 ... they're different products :)

How to setup time capsule as router

This is my first try at using time capsule. how do i set this up as a router. i have bell dsl modem and would liek to use the time TC to be the router for wireless and wired connection. If I setup IP Address 192.168.1.1 will this be same ip address I set for Router Address? Do I need to change the Connection Sharing option?
The modems IP is 192.168.2.1.
Under Airport Utility - Settings - Internet:
-Internet Connection Tab - connection using: Ethernet & connection sharing: off (bridge mode)
-TCP/IP tab - configure IP: manually; ip address: 192.168.1.1

You might want to check with your service provider to see if the device can be configured as a "bridge". That is the way it must be setup if you want it to work correctly with the Time Capsule.
You might want to look at this link for more information on your modem.
http://help.iglou.com/questions/92/Siemens+Speedstream+4200+Bridged+Configuratio n

How to setup Time Capsule to use wifi and 2 ethernet ports

Hi, I hope someone can help with this issue as I've been searching for an answer without success. Basically, can a Time Capsule (1st gen) connected to a modem create a wireless network, as well as connect to an ethernet powerline adapter, as well as connect to an iMac by ethernet?
My original setup was as follows:
modem > time capsule (which creates a wireless network) > iMac
I bought an AirPort Express to use in another room. It was extending the TC wifi network, but the speeds weren't great so I've got a pair of powerline ethernet adapters. I wanted to add those into my current setup so that the Express can create a wireless network.
Anyway, before I can get to that stage, I'm having issues with the TC. I want to achieve the setup as follows:
modem > time capsule (which creates a wireless network) > powerline adapter 1 * > powerline adapter 2 > airport express
* But as well as connecting an ethernet cable to powerline adapter 1, also connect one from TC to my iMac.
When I tried connecting an ethernet cable to the TC in my original setup, the iMac lost connection to the internet. I've managed to get the following setup to work:
modem > time capsule (which creates a wireless network) > powerline adapter 1 > powerline adapter 2 > imac
But to achieve the setup I want, would require me to buy another powerline adapter (for the Express), and it seems silly to have to use a powerline adapter for my iMac when it is right next to the TC.
Any help would be appreciated.

modem > time capsule (which creates a wireless network) > powerline adapter 1 * > powerline adapter 2 > airport express
* But as well as connecting an ethernet cable to powerline adapter 1, also connect one from TC to my iMac.
When I tried connecting an ethernet cable to the TC in my original setup, the iMac lost connection to the internet. I've managed to get the following setup to work:
What you are attempting should work fine. The TC should be able to manage multiple ethernet connections as well as the wireless.
Investigate what is happening when you plug ethernet into the TC from the imac.
Please try it.. turn off wireless in the imac to ensure ethernet is the only connection.
But I would recommend you shut off the whole network at that point. Restart everything in order.. modem .. TC.. EOPs.. Express.. clients.. with 2min gap between them.
Now look at the imac and check the network preferences.. did it pick up the correct IP from the TC? It should have router (gateway) and DNS all correct using dhcp.. if not check the connectivity light on the TC.. does it come on when you plug in the ethernet cord?
Open a terminal on the mac and ping the TC address. does it respond?
Give a few screen shots of how the TC is setup.. bridge, router and what IP it is running. Even just the summary page.

How to setup time capsule

i have a time capsule that I brougth a couple of yerars ago, how should I set it up?

See Here > Using Time Machine with a Time Capsule
From Here > http://pondini.org/OSX/Home.html

How to setup Time Capsule as wireless router cascaded under another router

I'm lodged on the second floor of a house where I get one ethernet cable coming out of an old 4-port NETGEAR router (connected to an ADSL modem that) on the first floor. The router gets an IP from the ADSL 87.xx.xx.xx and re-leases on the LAN 192.168.0.2 thorugh 99.
Up here I would like to set up my Time Capsule to create a wireless network. I need to use the connection coming out of the downstairs router.
All configurational combinations of these two routers that I've tried (plenty) are giving me horrible network conflicts between the Time Capsule and the down-stairs router. Even if I use static IP (192.168.1.100) and enable bridge mode on my Time Capsule, I get slow pings and 30% package loss pinging 192.168.1.1 (the router downstairs).
ADSL straight to the Time Capsule and assisted setup works fine so cables and my other hardware seem ok.
I've got access to configure all devices as I wish.
Thankful for help.

NO. Things are not ok!
Just as I accepted the package-losses and lowered experienced surfing-speed I realized that I couldn't send mails or upload files to my ftp.
Now I get systematic. I test both my wired and wireless connections with ping and through www.speedtest.net.
Test
Ethernet to my iMac:
Ethernet to bridged TC and wireless to my iMac
Speedtest.net (down)
1.98 mbps
1.90 mbps
Speedtest.net (up)
1.74 mbps
0.02 mbps
Ping* to router
0.8ms (0% package loss)
2.5ms (5% package loss)
Ping* to apple.com
178ms (6% package loss)
190ms (5% package loss)
* Ping averages calculated on 100 pings
What can one conclude / suspect from these numbers? Why does my upspeed drop? I also feel that it's slower to surf wirelessly. I don't feel that the 1.98 to 1.74 mbps drop accounts for that though. I know that conversion to wireless should make for a speed-loss. (I read 10% which seems to be what I measured here).

How to setup time capsule in Bridge Mode

How do I set up my airport base station in Bridge Mode?

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the base station, then click Edit in the small window that appears
Click the Network tab at the top of the next window that appears
Insure that the setting for Router Mode = Off (Bridge Mode)
Click Update and wait a full minute for the base station to restart
It would be a good idea to also.....
Power off both your main router and the base station
Wait a minute or two
Start up the main router first and let it run a full minute
Start up the base station next the same way

How to setup Time Machine on 2 drives in 2 different locations

I back up on 2 different drives in 2 different locations. Time Machine only remembers 1 drive so every time I go home I have to open TM pref and switch drives to backup to. Is there a way to get TM to remember the settings for both drives and make it a plug and play backup?

the following method was proposed by biovizier on this forum and it seemed to work when I tried it. you can try it and see if it works.
First, give both backup drives the same name. then enable showing hidden files in finder. you can do this using Tinkertool or using the following terminal command
defaults write com.apple.finder AppleShowAllFiles TRUE; killall Finder
then open the TM drive at home in finder. there will be a file at its top level with the name like .001d4f56a01d. Copy this file to the main disk, go to the other location and move this file to the other TM drive.
You'll have to authenticate with your admin password to do this. then unplug and replug the TM drive and
see if TM backups work without reselecting the drive.
you also might have to change the ownership on that file - I'm not completely sure about that.

Execute custom script Logic from a package.

Hye!
I'm working with 7.0 NW.
I have a custom scriplogic and I would like to execute it from a package of Datamanager.
Is posible? Could you gime me an example code?.
Thanks.

Hi Martin,
This is feasible.
Once you have created a script logic, you need to create a process chain and the script logic will be linked with this process chain. Then you need to create the DM and link the process chain with this DM.
There is one document on SDN "How to Run a Top Down Allocation within BPC NW". Please refer to this. This will take you through the process of linking a script logic to a process chain and then to link the process chain to a DM.
Hope this helps.

How to setup Time to execute eCATT scripts automatically from TestPlan

Similar Messages

Maybe you are looking for