How to show an alert
Hi:
Apex 4.1
I have a report that, when it runs, I want an alert to show if one of the report columns contains a specific value.
Can anyone suggest how I might do this?
Thanks.
Scott:
Brilliant idea! I changed the after region check to return <script>window.alert</script> javascript and it works great.
Thanks!
Similar Messages
-
Urgent Help Please..How to show an alert in jsp if servlet has an exception
Hi
I am calling a servlet from popup jsp.
When the values are submitted from the jsp I am calling the servlet where i have functionality to send an email. But if email fails in the servlet I have to return to the popupjsp and show an alert to the user.
If any body knows please help.
thanks in advance.Hi,
Do like this :
In the servlet's doPost() method, add codes in the manner
mentioned below.
public void doPost(HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException{
PrintWriter out = response.getWriter();
try{
//throw new Exception();
catch(Exception ex){
out.println("<html><body>");
out.println("<script language='javaScript'>");
out.println("alert('Exception Occured Servlet...');</script>");
out.println("</body></html>");
Hope it helps.
Regards,
Sudhir -
How to show javascript alert popup after commandLink action?
Hi,
I'm building an ADF-based .jspx page. I have a commandLink whose action calls a method in my page's backing bean. I want to show a javascript alert popup when the commandLink is clicked and after the backing bean method has been called. The text displayed in the alert popup is dependent on whether the processing in the method was successful or not.
I couldn't figure out how this could be done though. It doesn't seem I can use the onClick attribute on the commandLink because that gets called before my backing bean method gets called. From my backing bean method, is there some way to launch a javascript alert popup and show certain text in it based on what happened in the method?
Thanks for any ideas.Hello and thank you for your reply,
I am trying to combine dwr and ADF.
When I use the following code to grasp the input value from the user
FacesContext fc = FacesContext.getCurrentInstance();
ValueBinding expr = fc.getApplication().createValueBinding("#{bindings['LIMARXESPORTCODE_bindVariable2'].inputValue}");
setLIMARXESPORTCODEbindVariable( expr.getValue(fc).toString() );
in order to use it as a dynamic bind variable to the where clause of the following query:
vo.setWhereClause("LIMARXESPORTCODE = :LIMARXESPORTCODE_bindVariable");
vo.defineNamedWhereClauseParam("LIMARXESPORTCODE_bindVariable", null, null);
vo.setNamedWhereClauseParam("LIMARXESPORTCODE_bindVariable", LIMARXESPORTCODEbindVariable );
executeAndShowResults(vo);
in the backing bean java code. All I get as an output from a javascript alert window is null.
However, when the bean member variable LIMARXESPORTCODEbindVariable has a
hard coded, static value i.e. LIMARXESPORTCODEbindVariable = 111; and the first code snippet is commented out, everything works just fine!
Any hint is welcome,
T I A. -
How to Show the Alerts inside the Form in JSP?
Hello
I am having parent form inside that thru one of the links,opening
a small another JSP. Inside the small another JSP, i am validating
the Screen and giving alerts. While Validating, the Alerts are coming
outside the small another JSP and appearing in the Parent Big Page.
I want the alert to appear in the small Another JSP. What to do?
ThanksWhen you submit, the whole form is submitted. thats why you are getting alerts like that.
you can use HTML frames to avoid these. but it is not possible to have frames inside a form. you have to have forms inside a frame. submit that particular frame's form so that only that part will be refreshed with messages/alerts.
the otherway is paint the screen as it was earlier just change the inner jsp content. its seems you are getting only alerts cos the information is same.
-sun -
From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?
Since you're using a 3rd party app, suggest contacting the app developer or looking at their support site for help.
-
How do I edit the show ink alerts option?
My printer is an HP Officejet Po 8600
I set up my printer to show ink alerts only when i print,
Bu t I would like to change it to show print alerts all the time.
I cannot find this option in the settings.That settings is available through the Embedded Web Server on your computer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
How to show modal window without popup in a web page using javascript
Hi,
How to show modal window without popup in a web page using javascript, means when the modalwindow is opened it should not ask for popup blocker alert......
pls help me.....Thanx for ur reply,
Actually the senario is when i click on a button, another jsp page should be displayed in a modal window without popup, but the functions alert() and confirm() will not accept the url path of the another jsp page... -
How to show Html5 created in eclipse and link to any cloud application like c4C through HCP
Hi Experts,
How to show Html5 created in eclipse and link to any cloud application like C4C through HCP
Regards,
Vijay.Your question is very unclear, please elaborate what you are trying to achieve.
Also, did you click on the Alert Moderator link? This is for reporting abusive content, spam, points cheating, etc. It should not be used w/o a reason (one of the above) as what it does is putting the content in the Moderators' queue and hiding it from public view. -
How to show property bag values of site collection in web part on landing page in sharepoint online - office 365?
You can use JavaScript Client object model to read the property bag values. Example:
function getWebProperty() {
var ctx = new SP.ClientContext.get_current();
var web = ctx.get_site().get_rootWeb();
this.props = web.get_allProperties();
ctx.load(web);
ctx.load(this.props); //need to load the properties explicitly
ctx.executeQueryAsync(Function.createDelegate(this, gotProperty), Function.createDelegate(this, failedGettingProperty));
function gotProperty() {
var myPropBag = this.props;
alert(myPropBag.get_fieldValues()["allowdesigner"]); //returns the value of the key allowdesigner
function failedGettingProperty(args, sender)
//handle errors here
Source:
http://sharepoint.stackexchange.com/questions/37198/grab-a-specific-property-bag-using-ecma-script
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field -
Hi All,
Based on the below criteria i want to set the alert
Select U_SDate,U_EDate from [@PROJ_DET]
=====================================
U_Sdate U_Edate
1)2008-10-01 2008-11-01
2)2008-10-02 2008-12-25
so, in the first row the project planned is 30 days..so i want to set a alert like if the current date comes to 2008-10-10(i,e before 20 days)....i should show a alert....can anybody suggest me some ideas like how to set these alert before completion of the project before 20days of U_Edate.
regards,
shangai.hi sierdna,
Based on the query i have taken 2 fields
Select B.ProjectName,A.EmployeeName from [@PRJ_DET] A inner join [@PRJ_MST] B on A.code=b.code Where (U_EDate)-(GetDate())<=20
Project Name Employee name
========== ============
Sample1 John
Sample2 Micheal
SAmlpe3 David
so,in the alert i want to display the project name end date is going to comlpete.......how to set the alert.........can anybody tell me
regards,
shangai. -
How to close all alerts?
Hello ,
when i open plug in and perform opration then alert window show. i want to close that alert on menu item click.how to close all alerts on button or menu item
click?can any body help me?Double click the home button. Swipe up toward the top of the iPhone each icon that you see over an app icon.
When finished, single clock the home button.
This closes each application one at a time.
To close them all together, restore the iPhone. -
How to get an alert when I file does not exisit in CC
Greetings,
I have a FILE SYSTEM (NFS) communication channel which should read a file from a drive and do content conversion. If the file exists, the process will be completed just fine. However, if no file found, no errors will appear, and the log will show:
11/13/07 10:06:19 AM Polling interval started. Length: 60000.0 seconds
11/13/07 10:06:19 AM Processing finished successfully
11/13/07 10:06:19 AM Processing started
Is there a way to raise an exception or setup an alert in case my communication channel didn't find the file?
Thank youHi,
If u dont have any file in the source directory then how can u see the sucess message in the RWB.When u have to triger an Alert if u have any error.How u declear the Alert catagory.all depends on trigerring an Alert.
If u dont have any file then u ahve to trigger an Alert i dont think any client will require this reqiurement.
if the source directory is wrong or if u have any probelm with mapping or if ur adapter fails then alos u can triiger Alert.
U cant find this type thread in SDN tooo.
Regards,
Phani -
Hi all,
I have created a popup with some fields. Doing mandatory fields validation in the button of popup. Popup is called from the button by using the show popup behavior.
In the button action method, if the mandatory fields are missing am raising the alert by using the below code:
FacesMessage msger = null;
msger =
new FacesMessage("Inside Validate");
msger.setSeverity(FacesMessage.SEVERITY_ERROR);
FacesContext.getCurrentInstance().addMessage(null, msger);
It is showing the alert. But it closes the popup. My requirement is should not close the popup when the alert is showing.pls guide me in this.
Regards
C.Karukkuvel
Edited by: C.Karukkuvel on Dec 27, 2010 3:57 AMHi,
For ur Case u need to open and close the popup programatically.....
Open Popup : Open Popup Programmatically
Close Popup : how to close a popup by backing bean?
Remove the show poupbehaviour
Define popup type as none and inside the buttonbar facet of the dialog have ok cancel buttons... In the buttons have the closing logic of the popup after ur validations gets passed
Regards,
Suganth.G -
How to receive an Alert when a Purchase Order is added?
Hi all,
I am wondering how to set an alert so that it will trigger when a P.O. is added. Really all that needs to be displayed to the alert recipient is the DocNum, CardName, and DocTotal of the P.O. I know how to generate a list of P.O.'s entered for the day, week, etc., but really all I want to happen is as follows:
1. A user adds a Purchase Order.
2. An alert is displayed to whoever I select that shows that user the DocNum, CardName, and DocTotal for that specific P.O.; it only needs to be displayed once, and it only needs to show the most recent P.O.
Any help on how I can acheive this? I think the answer is likely very simple.
Thanks in advance.Hi Jim,
What would be the reason you need this as an Alert.
One of the things you should try is to minimise number of alerts in the system. Mainly because Alerts can substantially slow the system and also the system takes longer to login as the Alerts are checked when the user logs in.
This I am saying because of my practical experience implementing B1 for many years now. I could give you an answer to your question which provides very minimal value without any reasoning to it.
As far as possible try to use out of the box options and one good option for this is to use the Open Items Report and check for Open PO's
Suda -
Packet capture via 'show events alert' on 4.1(4)
Grettings all. I have an IDSM2 running 4.1(4g). When looking at events via 'show events alert' I notice that some signatures have packet capture info, other do not. Trying to figure out what determines this??
Example, Long SMTP Command(sigID 3109, subsigID 1) 'show events alert' has packet capture info. Looked at the following
1.
(config-vsc-virtualSensor)# SERVICE.SMTP
(config-vsc-virtualSensor-SER)# show settings
CapturePacket: False <defaulted>
2.
config-vsc-virtualSensor)# SERVICE.SMTP
config-vsc-virtualSensor-SER)# signatures siGID 3109
(config-vsc-virtualSensor-SER-sig)# show settings
CapturePacket: False <defaulted>
3.
config-vsc-virtualSensor-SER)# signatures siGID 3109 subSig 1
config-vsc-virtualSensor-SER-sig)# show settings
CapturePacket: False <defaulted>
=========
Again...trying to determine where/how the option to get packet capture for this sigID is set. Thanks for any help.It looks like you are in the right place and checking the correct setting.
Were the alerts you are looking at generated during a period of time that CapturePacket had been set to True? Changing this setting will only affect new alerts being generated, and not old alerts previously stored on the sensor.
A few other things to check:
Try executing "show conf" and look for any tunings on Sig 3109.
There is a very small possibility of the config being out of sync. Doing a show conf should show you the config currently being used by the sensor.
Execute "show events" and verify that the SigID is 3109 and the SubSig is 1 or 0. If it is another subsig like 2, then you will need to separately edit the settings for that subsig.
Marco
Maybe you are looking for
-
Service PO from Delivery Order
Hi, I have the following scenario. On creation of a Delivery Order, I would like to trigger automatic creation of a Service PO. I am looking for ways to do it. Could some one guide me on how to proceed. I am looking for the right exit where I can put
-
Problem with a signature field available in Adobe acrobat and absent in READER
Hello i just created a couple of pdf forms with adobe acrobat 9 standard and authorize the people who will fill in these forms to sign them. My properties are correctly done and i can clearly see that signing is allowed from adobe acrobat. I tried to
-
Niggles with Windows Vista Business
Hi, I am new to Windows Vista and just installed PC Suite V6.86.9.3 for my N95 8GB on a new laptop. It works but I have a couple of niggles. Initially, I just decided to pair my phone via bluetooth before installing PC Suite. That worked with XP. But
-
Quad-Core or 12-Core for FCP 7.0.3 and AfterFX?
Hi Folks, I am ready to buy a new MacPro. My main use is FCP 7.0.3 and AfterFX. We all know 12-core is obviously much better, but Is there such a great difference on performance, especially rendering time on both softwares runing on the 12-core rathe
-
Public Folders not accessible as Guest
Having a problem connecting to Public folders as Guest on certain Mavericks iMacs [10.9.2] over the company LAN. The network has no problems, no IP conflicts. There are other 10.9.2 Macs that can have their Public Folders accessed. There is no discer