How to solve 0xE8000001 issue

I have built an simple app which runs fine in iPhone Simulator. But I got 0xE8000001 error when I tried to deploy it to iPhone device.
I have tried various way, such as restart iphone, restart mac, put in provision info, and so on, all not work.
The message:
Your mobile device has encounted an unexpected error (0xE8000001) during install phrase: Verifying application.
Any advice is welcome, thanks in advance.
// Jack

I have the same issue. I even purchased the $99 developer program, and never even received an email about it. I was told to go to some portal page which I can't find and links that I have tried appear to give me a "You do not have access to the iPhone Developer Program" message. I am extremely confused. Please help.

Similar Messages

Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?

Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?
Thanks.

The system is set up to backup files to the iCloud at the end of the day. This has ot happen for sometime now and the mesaage I get is the back up error.

When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

When starting a rental movie, I get the message: "An error occured loading this content, please try again later". Any ideas how to solve this issue?

Firstly, I should have typed speedtest.net previously.
Now that's an interesting comment you make, out of interest do you have any purchased HD movies in your iTunes collection, if so, do they play on the Apple TV with your new tv.

How to solve the issue "CUV check user equivalence failed" ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
In order to install Grid Infrastructure, we need to run Cluster Utility Verification (CUV) at first by running the cammand below:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output:
Performing pre-checks for cluster services setup
Check: User equivalence for user “ora11g”
Node Comment
rac1 failed
rac2 failed
Result: PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
Pre-check for cluster services setup was unsuccessful on all the nodes.
As you see above, check user equivalence failed. I have run the 4 commands to fix this error as below:
[ora11g@rac1 /]$ ssh-keygen
Its output:
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
0c:10:6c:3b:ae:21:63:64:f8:0d:0e:d8:f0:41:32:ff [email protected]
[ora11g@rac1 .ssh]$ cat *pub >>authorized_keys
[ora11g@rac1 .ssh]$ ssh rac1
Its output:
The authenticity of host ‘rac1 (127.0.0.1)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
[ora11g@rac1 .ssh]$ ssh rac1-priv
Its output:
The authenticity of host ‘rac1-priv (192.168.137.35)’ can’t be established.
RSA key fingerprint is 9d:ae:51:7c:72:81:07:37:31:92:f1:c8:90:bc:52:55.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ‘rac1-priv,192.168.137.35′ (RSA) to the list of known hosts.
Write failed: Broken pipe.
After run the 4 commands above, I run the command below again:
[ora11g@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Its output is the same:
PRVF-4007 : User equivalence check failed for user “ora11g”
ERROR:
User equivalence unavailable on all the specified nodes
Verification cannot proceed
I think the problem is "Broken pipe" and ssh cannot write authorized_keys to the machines.
My question is:
Do any folk understand how to solve the issue CUV "check user equivalence failed" for 2 VMs ?
Thanks.

Folks,
Hello. Thanks a lot for replying.
I have installed Grid Infrastructure a few times. Each time, on step 7 of 9, the installer fixes and checks 2 machines correctly. The entire installation has 3 parts as below:
1) Install Grid Infrastructure for a Cluster
2) Execute Root Scripts for Install Grid Infrastructure for a Cluster (script is root.sh)
3) Configure Oracle Grid Infrastructure for a Cluster that includes NCA, ASMCA, PICA and CVU.
Each time, on step 8 of 9, the Installer installs Grid Infrastructure for a Cluster successfully that includes "Prepare, Copy files, Link binaries, Setup files and Perform remote operations".
But when the Installer get to part 3 CVU, it fails and then the Database cannot be installed.
Deinstall Grid is a very complicated process to do. Because of this reason, we need to run CVU at first to make sure everything is correct for 2 machines before install Grid.
Even we ignore "user equivalence (ssh)", we don't know whether other items can be passed or not because CVU cannot proceed to check the machines.
My question is:
How to have the script "runcluvfy.sh" continue to check the machines while confronting "user equivalence failed" ?

HT6001 "BtITunes PlugIn Dll has stopped working" How to solve that issue Pls?

BtITunes PlugIn Dll has stopped working
how to solve that issue pls

The following document might be worth a try:
iTunes: Troubleshooting issues with third-party iTunes plug-ins

The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.

The "edit in" menu is completely inactive. All plug-ins are visible but in light grey; i.e. not accessible. Any idea how to solve the issue? Fyi: I am using LR 5.7.1 on MacBook with Mawericks.

Jim, that sounds like a good hypothesis. Yes, I am using smart previews. I have my originals on an external drive which is connected. Still, LR can not find them. Do you know how to tell LR where to find the originals? I would like LR to identify the source automatically: if external drive is connected LR should show "original and smart preview" not only "smart preview". Thanks for your help.

I'm not able to enrol in a iOS developer program as individual. My browser says too many redirects. I'm using the Safari Browser. Please let me know how to solve this issue.

I'm not able to enrol in a iOS developer program as individual. My browser says too many redirects. I'm using the Safari Browser. Please let me know how to solve this issue.

Further to my earlier post, I have just read an entry noting that if you already own a domain name, and ask your hosting service to forward and mask your iWeb '08 created, web.mac.com site to your personal domain, chances are that due to the masking of the site on web.mac.com, Safari browsers interpret the masking as being the end of the site, and as such, just return a blank page?
This may explain the problem. However, call me old fashioned, and possibly a little naive, but surely this cannot be the problem?? It's OK in Firefox!

Can't watch video on CNN with IPAD after installation IOS 6 any tip to solve how to solve this issue.

Can't watch video on CNN with IPAD after installation IOS 6 any tip to solve how to solve this issue.
Thanks for your support in advance

I have a few TV type Apps that are doing the same think since the IOS6 update . I figure the problem is at there end and there will be an update from them soon.

How to solve the issue "OEL 5.6 boot Oracle ASMLib driver: FAILED" ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer.
I downloaded Oracle Linux 5.6 Media Pack for x86_64 (file name V24479-01) from https://edelivery.oracle.com/linux.
I have installed OEL 5.6 for VM rac1 and done the follows:
1) install rpm and oracleasm packages for rac1.
2) edit /etc/hosts to set up IP addresses for eth0 and eth1 for rac1 and rac2.
3) edit eth0 and eth1 for rac1 by using command [root@rac1 \]# neat
But when boot the OS, I see "initializing Oracle ASMLib driver: FAILED".
When configure Oracle ASM library driver by running the command:
[root@rac1 /]#/etc/init.d/oracleasm configure -i
Its output "initializing Oracle ASMLib driver: FAILED"
I think the reason is the OS cannot initialize Oracle ASMLib driver. My question is:
Do any folk understand how to solve the issue "OEL 5.6 boot Oracle ASMLib driver: FAILED" ?
Thanks.

Folks,
Hello. Thanks a lot for replying. OEL 5.6 comes with 2 kernels: uek and red hat
I have chosen to use red hat kernel for 64-bit. I run the following command:
[root@rac1 /]# uname -rm
Output: 2.6.18-238.el5x86_64
I have downloaded 4 files for this version of kernel from
http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html as below:
oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5-debuginfo-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm
I have installed the 4 files and got the error messages for the first 2 files as below:
[root@rac1 /]# rpm -ivh /home/oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
Error: Failed dependencies: kernel-xen=2.6.18-238.el5 is needed by oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
[root@rac1 /]# rpm -ivh /home/oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
Error: Failed dependencies: kernel-debug=2.6.18-238.el5 is needed by oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
The last 2 files have been installed successfully. But when reboot Oracle Linux Server-Base 2.6.18-238.el5, I still see :
"Initializing ASMLib driver: FAILED."
[root@rac1 /]#/etc/init.d/oracleasm configure -i
Its output "initializing Oracle ASMLib driver: OK "
My questions are:
Does the issue OS "Initializing Oracle ASMLib driver: FAILED" have effect later ? Do we need to solve it ?
Thanks.

ITunes artwork. Anyone know how to solve paste issue?

In the last day I have been unable to paste artwork into my iTunes albums without covers.
Instead of pasting in - the artwork turns black.
Anyone had the same issue or know how to solve it please.
This is very annoying.

yea having the same problem, must be something that went wrong in the update .. this never happened before the update i had to do yesterday (i think it was yesterday anyway). Also know someone else who has this problem too so itunes people get busy and fix it please!

How to solve the issue: "Failed to install NtCreateSection monitor" etc

I am a user of VM VirtualBox Manager
I have been searching for the solution for the above issue.
But I got nothing until now 22nd August 2014.
But after several trying several settings, I succeeded to start VM VirtualBox Manager without getting "Failed to install NtCreateSection monitor"
So I just want to share with others, and perhaps what I did above can solve the issue for others with similar problems
Here it is:
1. Try to change the display resolution to AUTOMATIC
2. and / or try to disable the extension packs
As for me, I only did no.1 only.
And also when I did that, I was still disabling my avast.
(Here I'm trying to give a solution of an issue, without following other's thread.)
Actually for me this was an idea, and thx to BluShadow, I know this thread belongs here as a discussion topic.

I received the above msgs just now (2nd time after yesterday as 1st time), and I could get rid of the error msg by doing the above steps once again.
The important thing is to change the display to another option.
eg. if your current display is "Automatic" then change it to "Hint" etc
if your current display is "Hint" then change it to "Automatic" etc, then you can start the virtual machine / HDD again.
Hope I can help you guys with the same problem.
Thx,

How to solve this issue in query definition

Hi Experts,
I need to solve an issue existed in a query.
This query is built on a infocube which main char and key figures as follow:
sales doc., item, material, fiscal year/period, ordered qty, billed qty.
The query has to show opened qty for specific sales doc / item level. the formula for opened qty = ordered qty - billed qty. But some of the sales doc /item are partial delivered i.e. there are several deliveries' entries for same sales doc/itm. for example the entries as follow:
sales doc---- item--materailfiscal year/periodordered qty-- billed qty
20001------ -- 30--- m1 2009/002 200--
25
20001-- 30 -m1 2009/002 - 200--
100
Then after the execution of the query we got the opened qty: (200 - 25) + (200 - 100) = 175. This is totally wrong because the correct opened qty should be 200 - 25 - 100 = 75.
Could any body provide a solution to get the correct result ?
Thanks a lot
Edited by: Leon Ouyang on Dec 15, 2008 4:12 PM
Edited by: Leon Ouyang on Dec 15, 2008 4:13 PM
Edited by: Leon Ouyang on Dec 15, 2008 4:43 PM

Hi Leon,
Somewhere in your infocube there must be an indicator whether it is the first delivery or not.
Change ordered quantity into a resctricted keyfigure using the restriction of the indicator first delivery.
Your overview will be:
sales doc---- item--materailfiscal year/periodordered qty-- billed qty
20001------ -- 30--- m1 2009/002 200--
25
20001-- 30 -m1 2009/002--
100
And your total will be correct.
Success,
Udo.

How to solve performance issue

Hi
        How to resolve performance issue in following select query-
SELECT *
          INTO CORRESPONDING FIELDS OF TABLE it_final
          FROM ce1zcsc
          WHERE paledger EQ c_10                 "Currency Type
          AND   vrgar     IN s_vrgar              "Record Type
          AND   versi     EQ space                "Plan Version
          AND   perio     IN r_perio              "Period
          AND   bukrs     IN s_bukrs.             "Company Code
TABLE CE1ZCSC has around 173 fields,but it_final has around 105 fields.
The indexes are created for the following fields:
paledger
vrgar
versi
perio
bukrs and
prctr.
I doubt whether we should look for Estim. CPU-Costs in index range scan or table access by index rowid in Execution plan for SQL statement.
If anybody can provide me with informative documents on performance issue.

Hi,
Dont use " * " & " corresponding fields " in the select query rather declare all the fields and use the "into table" clause.
Let me know if you still face the same problem.
-Naveen.

Ios 6 orientation doesn't work and boot time increases. How to solve these issues for dummy? I don't understand code and strings suggested by others.

I just upgraded from ios 5 to ios 6 on my ipad2. Now orientation doesn't work properly. Boot time increase, it takes longer time to boot. Is there any configuration to solve these issues? I can't understand the explanation with code and strings found on google to solve the orientation issue. Any easy configuration for dummy ?

It supports well for ios 5. I couldn't remember (5.x.x) exactly but I always keeps update for ios5 and the abnormality starts when I upgraded to ios 6.

Processchain errors in Production and how to solve those issues

Dear All,
Please share some process chain errors in production and how to solve those errors as well,
Please send me if any one have the list of errors and how you are solved those..
I am very new to BW,am also preparing my list of errors and solutions to fix them..Please share me if any one have ?
Thanks

Hi
Table of Contents
1.     Time stamp error     2
2.      PSA error records     4
3.      SID not found for characteristic     7
4.      Error calling number range object     8
5.      Trfc error     10
6.      ALE REMOTE lock     13
7.      Delta fails     14
8.      Deleting setup table     18
9.      How to run statistical setup for different Application components     19
10. How to do selective deletion     22
11. Roll up     24
11. Compression or collapse     25
12. How to do Attribute change run     27
1.Time stamp error
Resolution procedure
Go to RSA1Source system
Run program RS_TRANSTRU_ACTIVATE_ALL
Mention source system and Info source and then execute.
Now the transfer structure will be automatically activated.
Then proceed with the reload, it will get success now.
2. PSA error records
Go to details tab, we will find its packet no. and its record no.
Resolution procedure
Click on PSA icon in monitor and select the error data packet
Double click on error record and edit it to the correct value,
select save.
Now update from PSA to target by selecting the option Start update immediately.
3. SID not found for characteristic
Resolution procedure
a. Remove the failed request from data target by making its QM status into red.
b. Load Master data for characteristic using full update.
c. Then reload the transactional data.
4. Error calling number range object
Resolution procedure
Note down the assigned dimension into the cube for 0VAL_TYPE
copy the dimension name
Go to RSRV transaction
Tests in Transaction RSRV -> All Elementary Tests ->Transactional Data then double click on Comparison of Number Range of a Dimension and Maximum DIMID- then click on the right pane in same->Mention the cube name and dimension name, click on enter.
Then click on correct error. It will correct the error.
5. Trfc error
Resolution procedure
Go to SM58
Go to edit->Execute LUW.
Then do refresh in monitor.
Now it will pick the records and the load will get success.
Some times we found that some packets will not get updated even if the extraction is showing as complete.
Do manual update of each packet
6. ALE REMOTE lock
Resolution procedure
This can happen when user or ALEREMOTE is accessing the same table
a.     Remove failed request from data target by making its QM status into red.
b.     Check into sm12 and delete the lock, usually the BASIS deletes them
c.     Reload the package
7. Delta fails
Resolution procedure
R/3->BW
Data is coming from R/3 then make the request technical status red in monitor and remove the request from manage.
go to info package restart the load, then you will get a pop up saying that repeat of last delta click on request again.
Go back to manage and look for the delta type, it will show as Repeat of last delta.
BW->BW(Data mart)
Delta load failed from ODS to cube/any data mart.
Make its technical status as red
Go to manage and remove the failed request by making its QM status as red.
It is updating from ODS, so we have to remove the data mart status in ODS manage, before restarting delta
If you click on data mart status it will pop up a window
Click on delete icon, select YES and then ok.
Now refresh manage the data mart status will get deleted.
If you load now the failed delta will get success.

How to solve 0xE8000001 issue

Similar Messages

Maybe you are looking for