How to sovle the hardware error of the PCI-can2 card

我将一台DP-51仿真器通过NI公司的PCI-CAN2通讯卡与PC连接，由DP-51发送一些简单的信息给PC，然后在MAX中的busmonitor中观察通讯是否正常。刚开始的时候一切都没问题，在busmonitor中可以正常的显示dp-51所发出的信息的内容。但发了几条信息以后PCI-CAN2卡突然显示错误，在MAX中自检失败，显示硬件错误7；打开can0或CAN1口的busmonitor则出现0x6ff62023（CANErrBadIntName）的错误信息；而DP-51上则显示sja1000总线关闭的错误。
这个错误以前也出现过，尝试过重新安装驱动等许多办法，还是没能搞定，最后只能重装系统。现在又出现了这个错误，希望哪位高人能帮忙解除这个烦恼，谢谢

Unless your card has specific commands it supports outside of GP then you will need to create an applet to determine these things. There is the JCSystem.getAvailableMemory API that can tell you how much of each memory type are left on the card. These only return a short so you will need to search the forum for ways to work with larger cards.
You should really be looking at the card product documentation from the manufacturer for these details.
Cheers,
Shane

Similar Messages

Does the PCI-CAN2 card support DeviceNet ??

We are building a CAN network to simulate the CAN bus environment in vehicles.what we have are a pci-can2 card ,a simulator based on 51singlechips,and a electromotor.we plan to build a CAN node with the simulator and the electromtor to simulate the mirror adjustor in vehicle ,and try to allow the exchangement between the realone and the simulator later .so ,a Devicenet based on CAN network may be a suitable choice to us.But I saw two different products on NI.com , PCI-CAN2 and PCI-DNET.so I wonder whether we can implement Devicenet protocol on the PCI-CAN2 card ? If possible , what should we do and what do we need? no matter software or hardware ,Could you please give me some suggestion? Thank you !!

Hi,
The easiest way to interact with a DeviceNet based network is using the NI-DNET
driver software. The NI-DNET software runs on all CAN cards that come
as part of an NI-DNET kit (PCI-DNET, PXI-8461/D and PCMCIA-DNET) as
well as certain Series 1 CAN cards.
There are two different types of CAN hardware, referred to as 'Series
1' and 'Series 2'. Only 'Series 1' CAN cards with a high-speed physical
layer can be used with NI-DNET.
'Series 2' CAN hardware was introduced about two years ago and DOES NOT
work with NI-DNET. The online product pages don't list Series 1 CAN
hardware anymore.
From chapter 2, 'NI-DNET Hardware Overview' of the NI-DNET User Manual:
Hardware in (current) CAN kits is referenced as Series 2. Hardware in
DeviceNet kits is referenced as Series 1. Series 2 CAN cards cannot be
used with the NI-DNET software (NI-CAN only). The features of Series 2
CAN cards are specifically designed for CAN applications, and provide
no distinct advantages for DeviceNet. For more information on Series 2
hardware, refer to the hardware overview in the NI-CAN Hardware and Software Manual.
Hardware in CAN kits offers 1-port and 2-port variants. NI-DNET
operates on one port only. If you use NI-DNET on a 2-port Series 1 CAN
card, only the top port can be used.
Hardware in CAN kits offer special transceivers (physical layer) such
as Low-Speed/Fault-Tolerant (LS) and Single-Wire (SW). Hardware in CAN
kits also offer the option to power the transceiver from the card, not
the network. These transceivers cannot be used with DeviceNet. Only
High-Speed (HS) transceivers comply with the DeviceNet specification.
-B2k

How to disable the builtin sound card on MS-7033 (915PM)

Sorry,
I was unable to find how to disable the builtin sound card on MS-7033 (915PM) in order to plug an other PCI sound card.
Is it automatic, via the Award bios or what ??
Thanks for any help..
PhL

Quote from: blazing storm on 18-February-05, 04:31:46
The device manager in control panel, which is under 'system' and then 'hardware'.
Thank you for your post. It seems to be the only one solution to this issue.
I was told (OEM support) that the bios is a generic one (reason why the AC97 line appear) but for this kind of mother board, it cannot be accessed.
Your solution works and I think it's enought.

Noise measurment of an accelerometer with the PCI-4461 card

Hi everyone,
I'm trying to measure the noise of an single axis accelerometer with a PCI-4461 card.
First, I have manually measured this noise using an HP35665 signal analyser. I obtain something like this:
And now with LabView and the PCI-4461 card, I get this:
My question is: where does this part come from? And how to remove it ? (Since it doesn't exist with the signal analyser)
I'm using LabView 8.5.
This is how I configured the DAQ acquisition:
and this is my VI:
Thank you in advance for helping
Arthur
Solved!
Go to Solution.

Hello
Yes indeed, the time signal seems to have two paterns (in green below), once negative and positive once about 50 ms later. This pattern is repeated with a frequency of 0.94 Hz (for simplicity let's say 1Hz).
I have reproduced this pattern with matlab using a decreasing exponential:
I have obtained this spectral signal:
That closely looks like what disturbs the spectrum, indeed..
Then I have tried to output a sinewave and acquire it:
I didn't see any problem.
So I made the measurment with other sensors.
The sensors are ICP accelerometers.The sensors that I am using are in page 7 of these document:
https://docs.google.com/viewer?url=http%3A%2F%2Fvibrasens.com%2Fimages%2Fpdf%2FVS_Catalog.pdf
(I'm currently doing an intership in this company)
And finally I found that the problem came from the cable: when I use the shielded cables, the problem is present; and when I use "normal" cable, there is not the problem, as you can see :
(In red, the sensor is connected with a non shielded cable, and in white, with a shielded one.)

How to use the same credit card for more than one customer master

Hi,
this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
The customer does not like the idea of using alternative payer.
Did you ever face the same problem and how did you solve it?
Much Thanks in advance
Best regards
Clemens

thanks

How can I use the instrument toolbox in MATLAB 6.1 to contol the PCI-GPIB card under Linux?

I'm trying to use the PCI-GPIB controller to control lab equipment through MATLAB 6.1 (R12.1) under Linux. MATLAB's instrument toolbox seems to integrate with NI's board, but the MATLAB documentation says it requires the installation of a driver. I've downloaded the linux gpib driver, and I'm able to run the associated utilities (ibconf, ibic, ibsta), but MATLAB cannot interface to it. For example,
>> g=gpib('ni',0,1)
??? Error using ==> gpib/gpib
The specified VENDOR adaptor could not be found.
Where can I find a MATLAB driver and how can I install it?
Thanks,
Richard

Hello-
The knowledge base: "Can Matlab for Windows Call the National Instruments GPIB Driver?" Also applies to this question as well. This article is very extensive. Try searching on ni.com for "+matlab +gpib" for more details.
Randy Solomonson
Application Engineer
National Instruments

How to refund the apple store card?

I buy a e-applestore card mistakenly. What I want is iTunes card, so I buy a new one. I wonder how to refund the applestore card I bought before, I have not used it yet.

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
Apple stores generally stock Apple Store gift cards (Apple Store cards can only be used to buy from Apple stores and their online store, they can't be used with iTunes) - you could try phoning your local store and see if they have them in, or if it's not too far call in to the store.

How to get the external storage card serial no. through j2me code

hello friends,
I am developing an application in J2ME, in which i want to know the external storage card information(i.e serial number or its unique id).
Is there anyway through which i can get this information similar to System.getproperty().
It is very urgent.
can someone please help me???????

Hi Jason,
I wasn't able to find a C# function that would obtain the serial number for a PXI card. However, I believe you could use the VI_ATTR_MODEL_NAME function to get the model name of the device. Therefore, you would know whether it was the PXI-8430 or the PXI-8431. If this does not work, your workaround will work like you said. I know that this is not your desired way of achieving this, however, it will work. I can continue looking though and see if I can find a function that will return the serial number.
Thanks,
Kevin S
Applications Engineer
National Instruments

How to use the PCI-DIO-32HS counter

I have to create a SPI, I'd like to use counter, but the card doesn't answer, so Labview bug. Do you if there is programmable/configurable counter on this Card?

Hello,
The PCI-DIO-32HS does have a counter onboard. However the counter is only used for generating an internal clock in order to do pattern generation. You cannot program this counter in LabVIEW. If you need a counter, I would look at using an M Series Board, or a 660X board.
Best regards,
Justin T.

How i can connect the pci nican card with stoeber posidyn sds 4021 via serial cable

i'm trying to communicate the stoeber posisyn sds 4021 servo inverter and the pci ni-can card via serial cable. the problem is that 1 RxD and 2 TxD pins dont have any connection available on the can card.
it is important to connect these pins somewhere or can_l and can_h do all the job?
what about the v- terminal, it is possible to connect it in grnd and leave v+ with 8v?

In this situation it may be necessary to contact the manufacturer of this device. It is strongly recommended to use both CAN_H and CAN_L for CAN communication. The V- pin is used as reference ground. The V+ is simply for bus power.
Randy Solomonson
Application Engineer
National Instruments

Labview doesn't recoginze the PCI-6023E card

Hi there,
I have labview 7 installed in a windows 7 32 bit system. I just have a PCI-6023E card installed and the windows device manager said that device is ready to use. I am trying to install the driver on the CD but NI just fail to recognize that card

Hi dragondriver,
AG@Amfax is right, this LabVIEW version is not supported in Windows 7. The oldest supported version is LabVIEW 2009 SP1. Please take a look to this compatibility chart.
Once you have a compatible LabVIEW installed in the OS, you'll need a compatible driver version. Please refer to this link.
Best,
Carmen C.

Can the PCI-6602 card be configured for 3.3 volts?

I would like to be able to configure my pci-6602 card to output 3.3 volt signals either in software or with MAX. Can this be done?

The 6602 uses only 5V logic for it's driven outputs, but there is a Tri-State Enable feature which drives the output to high impedance instead of hi. This allows you to pull up the outputs to the required logic voltage.
The Tri-State Enable is found using the wired OR map in the DIO Port Config.vi

Anyone Using the PCI-424e Card Yet?

Just wondering if anyone's using the MOTU PCI-424e card in their systems, and if it's "smooth sailing" or "rough seas ahead".
Thanks.

Justin.
Sometimes when we e-chat, I imagine you doing something like this:
http://www.ifilm.com/player/mac.jsp?ifilmId=2679426&pg=default&skin=default&refs ite=default&mediaSize=default&context=product&launchVal=1&data=null
Especially when ILUVYERMOM is on the forum!

Windows 7 - Pci-to-Pci Bridge (Error: Code 10) - PCI Video Card

Before I state my issues I will list what I'm running and what I'm trying to accomplish.
I'm running Windows 7 Enterprise 64-bit edition, not the Beta or RC. I have 3 video cards in my possession (listed below).
- (PCIe) Evga GTX260
- (PCI) Evga 9400GT
- (PCI) Evga Fx5500
Out of those 3 cards I only use the GTX260 and the 9400GT. I had to 'retire' the Fx5500 because the latest WHQL (certified) drivers only provide support as far down as the "6 series" Nvidia cards. Unfortunately the Fx5500 is a "5 series" and falls below that line. I have already tried to use the GTX260 and Fx5500 in previous versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same make of video card - you'll get nothing but errors. There is the option of going to a place like guru3d.com and downloading a custom supported driver that covers both the GTX260 and Fx5500, but the drivers are not certified and lack support. Therefore, I purchased and now use the 9400GT which is covered under the drivers for the GTX260 and eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.
Now that you have some background info here is my issue Whenever I install the 9400GT I get a second 'pci-to-pci bridge' entry (the other entry has no errors) that shows up under 'System Devices' in the Device Manager. The second pci-to-pci bridge entry has a yellow triangle with an exclamation mark on it that refers to a problem. When you check the properties of this device it more or less says that Windows has detected a problem (Error Code 10). The GTX260 still works and even shows up under the 'Display Adapters' as a GTX260, but no entry for the 9400GT exists. I have tried the 9400GT in both PCI slots and each time it does the same thing. If I pull out the GTX260 and ONLY run the 9400GT, I still get the pci-to-pci bridge issue, BUT I do get a picture and can boot into Windows 7 without a hitch. When I do this there is still nothing listed under the 'Display Adapters' as a 9400GT or even a VGA compatible device.
After messing around with this for 10 hours (yes, I said 10 hours) I decided to dig out my retired PCI video card (the Fx5500). When I installed this card I had no 2nd pci-to-pci bridge entry appear under 'System Devices', and the one that was listed had no yellow triangle or error codes. I then checked under 'Display Adapters' and Windows 7 had recognized it as a VGA compatible device and was asking for drivers.
I have now concluded that there is definitely no issue with the motherboard or any of my hardware (including video cards). At first EVGA Support and I had suspected that the motherboard may be bad because of all of the pre-diagnostic steps I had taken during my 10 hour ordeal. I'm not going to list everything I did because it would literally take 3 hours to type it all in. Just believe me when I say that I have tried most things including but not limited to the latest bios updates (flashed 4 times and completely reset to ensure accuracy), custom IRQ management, entire OS re-installation X2, multiple/latest chipset drivers installed, multiple/latest video drivers installed, memtest testing, complete hardware teardown and re-build (adding one device at a time), and MUCH more. The only thing I did not try was installing a different OS other than Windows 7 64-bit to see if I could replicate the issue. This is a waste of time though because lets say that I install Windows XP Pro and the 9400GT doesn't have this issue... Well, that's great, but who gives a damn about XP Pro when I have been using it for the last 9 years and when I have a full version of Windows 7 that I want to use? I'm certainly not going to run XP Pro over Windows 7 just to use this PCI video card. Second, if I install XP Pro and it still gives me the same pci-to-pci bridge error then again, I've only wasted more time because if its not going to work in either OS then Im sure as hell not going to leave XP Pro installed when I can use Windows 7.
Thanks,
piyush

Maybe stupid question now but has your posting anything to do with Toshiba and Toshiba notebooks?

How to install driver for Intel Pro 1000 PCI Network-card

Hello,
I just bought the a.m. Intel Pro 1000 Network adapter, but I don't know at all how to install the driver for Solaris 10.
The installation instructions delivered from Intel didn't help me at all, because I can't uncompress the INTCGigae.pkg and the INTCGigaE.tar.z files.
I copied them to /tmp and folllowed Intel's Installlation Instructions.
Please keep in mind I am new to Solaris 10, with no Linux/Unix experience, when helping me.
Thanks in advance for help and assistance.

Hi!
And what happens if you install the driver from the Toshiba WLAN portal:
http://aps2.toshiba-tro.de/wlan
I still dont know what you mean with Askey for Toshiba
You should try to install the driver manually. Choose in device manager the WLAN card, right click and select Update Driver. Choose the advanced installation where you can choose the driver directory yourself and navigate to the folder where you have stored the downloaded driver.

How to sovle the hardware error of the PCI-can2 card

Similar Messages

Maybe you are looking for