How to suppress n/m in FSG with dash

Hi,
I want to suppress n/m for all my custom FSG reports with dash.
Any Idea how i can do this??
Thanks,

I was looking for the same thing - here is what I found.....
21. What is the meaning of ‘n/m’ on my FSG?
The means ‘no meaning’. FSG displays this when there is a calculation that is attempting a divide by zero. You cannot remove this, or change it to any other value (other than changing the calculation itself so it doesn’t result in a divide by zero).
http://oraclefinancial.wordpress.com/2011/01/02/fsg-functional-faq/

Similar Messages

How to suppress some IOS syslog events with ESM

Hello folks,
I've been advised to look for help here at NetPro forum by Cisco TAC engineers.
This is the situation here with 80+ customer routers. They have two VLANs behind the router at every location/site and practically identical setup for hosts at each site. These hosts generate a lot of traffic that is blocked/denied by routers and we don’t want to see syslog events created after this traffic.
I have created one message discriminator that suppresses syslog from generating an event when the traffic from a particular host is dropped by the router.
This is how it looks:
logging discriminator STOP-POS msg-body drops 10.43.66.100
logging buffered discriminator STOP-POS 256000
logging host 192.168.14.4 discriminator STOP-POS
logging host 192.168.14.5 discriminator STOP-POS
Now I want to add more discriminators to filter at least two more events, e.g. I don’t want to collect events when the router drops broadcasts
101511: .Aug 30 23:10:48.737: %SEC-6-IPACCESSLOGP: list vl3-in denied udp 10.5.35.200(137) -> 10.5.35.255(137), 43 packets
101512: .Aug 30 23:10:48.737: %SEC-6-IPACCESSLOGP: list vl3-in denied udp 10.5.35.200(138) -> 10.5.35.255(138), 10 packets
101513: .Aug 30 23:10:48.737: %SEC-6-IPACCESSLOGP: list vl3-in denied udp 10.5.35.145(138) -> 10.5.35.255(138), 19 packets
I tried to create two more discriminator as follows
logging discriminator UDP137 msg-body drops 255(137)
logging discriminator UDP138 msg-body drops 255(138)
but I couldn’t apply them to both buffered and trap logging as according to the TAC router and switching team IOS is limited with only one discriminator. They told me that I have to address it EEM team (I thought that Cisco calls it Embedded Syslog Manager) by the way.
So, I’d appreciate if you please help me create a filter that will address the above said requirements

Made again the discriminator with the pipe and strings without spaces. Something still is missing. Broadcast events are still logged. Below is the output of "show logging" on one of the routers. I think we can't break the IP address to match the way I did - 10.43.66.100|.255(137)|.255(138)
535_OTTAWAMARKET(config)#do sh logging
Syslog logging: enabled (0 messages dropped, 997 messages rate-limited,
0 flushes, 0 overruns, xml disabled, filtering disabled)
Active Message Discriminator:
LOG-FLTR msg-body drops 10.43.66.100|.255(137)|.255(138)
No Inactive Message Discriminator.
Console logging: level errors, 122 messages logged, xml disabled,
filtering disabled
Monitor logging: level errors, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 13 messages logged, xml disabled,
filtering disabled, discriminator(LOG-FLTR),
0 messages rate-limited, 1171 messages dropped-by-MD
Logging Exception size (4096 bytes)
Count and timestamp logging messages: enabled
Persistent logging: disabled
No active filter modules.
ESM: 0 messages dropped
Trap logging: level informational, 112934 message lines logged
Logging to 192.168.14.4 (udp port 514, audit disabled,
authentication disabled, encryption disabled, link up),
11 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering enabled, discriminator (LOG-FLTR)
Logging to 192.168.14.5 (udp port 514, audit disabled,
authentication disabled, encryption disabled, link up),
11 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering enabled, discriminator (LOG-FLTR)
Log Buffer (256000 bytes):
112931: .Sep 6 07:16:26.150: %SEC-6-IPACCESSLOGP: list vl3-in denied tcp 10.5.35.200(2553) -> 64.94.18.139(443), 1 packet
112932: .Sep 6 07:16:43.001: %URLF-4-SITE_BLOCKED: Access denied for the site 'updateservice.sonic.com', client 10.5.35.44:4328 server 144.198.28.150:80
112933: .Sep 6 07:16:46.034: %SEC-6-IPACCESSLOGP: list vl3-in denied udp 10.5.35.200(138) -> 10.5.35.255(138), 1 packet
112934: .Sep 6 07:17:46.035: %SEC-6-IPACCESSLOGP: list vl3-in denied udp 10.5.35.200(137) -> 10.5.35.255(137), 12 packets

How to run FSG with ADI..

Hi
Can any one guide me how to run FSG with ADI..?
regards
Ahsan

Pl post details of OS, database and EBS versions. Pl see if MOS Doc 131505.1(The Beauty of FSG in ADI) can help.
More information will be present in the manuals for your Apps release at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini

How to Suppress Header and footer.

Hi,
I have master-Detail report. Report prints One master and all detail records on a page. If detail records are more than to fit on one page, report prints master gaian on next page followed by detail records. For a master record If there are no detail records, I supress the master record also using format trigger.
My problem is how to suppress the Header & Footer information that has to be printed on each page otherwise. When I suppress printing of master, All I get is Page header and footer. This happens only to the master records that fall in between. The pages related to last master records are not printed.
How can I suppress printing of header and footer on blank pages.
Thanks

Thanks Santa & Rohit,
As santa has suggested, I am already suppressing the printing of master record and its column headings based on the count of number of deatil records. If count of detail records = 0, I am suppressing master record.
The problem is with Report header (TITLE etc.) and footer. I have to print TITLE and FOOTER on each an very page. So I have put these into Margins. The Count of master records at the report level, can be used to suppress the master records column headings and also TITLE and FOOTER. So if there is no master records, report does not print anything and that is fine.
Problem comes when there are some master records with "No" detail records. Something like:
-M1
----D1
----D2
----Dn
-M2
----D1
----D2
----Dn
M3
M4
M5
----D1
----D2
----Dn
M6
M7
M8
My report now produces pages for M1, M2 and blank data area (with Title and Footer) for M3, M4 and the M5. It suppresses pages for M6, M7, M8 etc. So if a master record has no detail records, but happens to be the last records that suppresses the TITLE and footer also.
Any Ideas how to suppress TITLE/FOOTER for M3 & M4.
Thanks

How can I display the vendor associated with result of my running total sum

I have a report that lists vendors with their most vecent order dates. I need to set up a rotation so that the vendor with the latest order date is next to be selected. I used the running total summary to pick the latest date. How can I display the vendor associated with result of my running total summary?

If your "latest" order date means the "oldest" order date, why don't you try this:
Go to Report tab -> Record Sort Expert -> Choose your order date in ascending order
This will make your oldest order your first record shown.
You can then create a running total count for each record.
Lastly, in your section expert under conditional suppress X+2 formula, write this:
{#CountRecords}>1
The result will only show the oldest record in your report.
I hope that helps,
Zack H.

How to suppress ?xml version = '1.0'? in XML file generation thru PLSQL?

Hi,
I am using
1. dbms_xmlgen.newContext to get the information from table.
2. After that I am using dbms_lob.createtemporary
3. Then I am using dbms_xmlgen.getXml
4. Finally I am using dbms_xmlgen.closecontext
I am using the above four steps to repatedly taking records from different tables.
My requirement is : Each and every time I am getting the <?xml version = '1.0'?>.
How to suppress <?xml version = '1.0'?> ?
Regards
Srini

Hi,
Use DBMS_XMLGEN.getXMLType to retrieve the XML data into an XMLType variable.
Then, with getClobVal method, you can convert it to CLOB :
SQL> DECLARE
2    v_xml XMLType;
3    v_lob CLOB;
4 BEGIN
5    v_xml := dbms_xmlgen.getXMLType('select * from scott.emp where rownum = 1');
6    v_lob := v_xml.getClobVal();
7
8    dbms_output.put_line(v_lob);
9 END;
10 /
<ROWSET>
<ROW>
<EMPNO>7369</EMPNO>
<ENAME>SMITH</ENAME>
<JOB>CLERK</JOB>
<MGR>7902</MGR>
<HIREDATE>17/12/80</HIREDATE>
<SAL>800</SAL>
<DEPTNO>20</DEPTNO>
</ROW>
</ROWSET>
PL/SQL procedure successfully completed

How to suppress bars on chart and customize legend text

I am new to Crystal Reports and have a couple of questions about bar charts. I am using Crystal Reports XI Release 2 with Developer Studio 2005 (C# .NET) and SQL Server.
I have a very simple report that sums up the values of 14 different database columns. There is a also a bar chart to display the summed values.
My questions are:
1. Based on some user preferences, I may not want to display all 14 values. I found how to Suppress fields on the report, but cannot figure out how to prevent them from appearing in the bar chart as well.
2. Can I customize the names of the bars in the legend?
Any help will be great appreciated!

Please re-post if this is still an issue to the .NET Development - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

HOW TO SUPPRESS "DO YOU WANT TO SAVE CHANGES YOU HAVE MADE"

ORACLE APPS CUSTOM FORM
WHENEVER I AM PRESSING CTRL+F11 AND SERACH ABOVE PROMPT IS COMING. HOW TO SUPPRESS THAT ONE.

The message is occurring because the user (or your code) has changed something in the form. Forms needs to know what you want to do with the changes before it can continue.
When you suppress this message, then when the user has changed something in the form, he won't be asked to save his changes. What do you plan to do then? If you silently discard his changes, he may not be happy with you. If you silently save his changes he may not be happy either. So let the user see the message and let him decide what to do.
If your code is changing something in the form (not the user), then you need to find out what is being changed. Once you know, then you can fix it.

How to suppress business area feild in cost center master data urgent plzzz

how to suppress business area feild in cost center master data

Hi ,
Please check these notes
Note 606933 OKEON: Business area is no required entry field
Note 506308 OKEON: Business area financial statement prevents change
Note 422801 KS01 with template does not check business area
It might be possible to create a modification,.
Please assign points if it useful
Regards
Ravinagh Boni

How to suppress Missing and Zero rows in OBIEE SA for Essbase Cube as Sour

Hi All,
Currently we have Essbase(ASO) cubes as source for OBIEE.How to suppress #Misssing and Zero rows in OBIEE.
For example, Dim1 having 4 members and Dim2 having 10 members then it shows 4*10= 40 combinations in Results.
If we considered Metrics also along with attributes, OBIEE will suppress “No Data” values and shows attributes having Data.
In Essbase-Excel Combination, Metrics will automatically comes with attributes so there we have option to suppress “No Data” rows under "Essbase Options".
In our current requirement,Users are selecting only Metadata.Is there any work around where we can suppress even if the measures or metrics are not selected
Thanks,
SatyaB

Thanks Deepak.
As i am new to OBIEE,If possible could you please tell me procedure in brief manner,How to create implicit fact column.Currently we have 10 dimensions.
So,Do I need to create individual implicit fact column for each dimension or one column is enough.
Please advice
Thanks,
SatyaB
Edited by: SatyaBodhanapu on Sep 29, 2011 1:16 AM

Warning message about CMP problem when launching query - how to suppress?

Dear Experts
How can I suppress warning message that did not stop the query from running?
I encounter this message when 1st launching it. The next run , it does not show. But if user run it i think may still show. How to suppress it?
The message is :
=================
Characteristic [Z_I_NN_FN]Application Sub Grou of the MultiProvider is not provided by the PartProvider ZC_00N; this means it is not identified. However, [Z_I_NN_FN]Application Sub Grou is compounded to 0COMP_CODE and 0COMP_CODE is identified with characteristic Z_I_MM_FM for InfoProvider ZC_006.
In this case, there is a compounding or CMP problem with [Z_I_NN_FN]Application Sub Grou in the MultiProvider for PartProvider ZC_006.
Processing characteristics with CMP problems in the data manager is very complicated and can have a negative impact on performance. The data manager cannot use SIDs for these characteristics (at least not in the corresponding InfoProvider) because the initial SID = 0 for [Z_I_NN_FN]Application Sub Grou is not the same as the initial compound key for 0COMP_CODE [Z_I_NN_FN]Application Sub Grou (that is, when real values are posted in ZC_006 for 0COMP_CODE).
For this reason, hierarchies for [Z_I_NN_FN]Application Sub Grou must often be read at leaf level. Furthermore, it is not possible to use hierarchy aggregates for [Z_I_NN_FN]Application Sub Grou or for the remaining InfoProviders.
System Response
Where possible, the system tries to avoid negative impacts on performance. Unfortunately, such performance issues cannot be avoided if the correct results are to be displayed.
Procedure
When working with important MultiProviders, you should always avoid characteristics with CMP problems.
====================
Please advise how to address CMP problem error message when launching query.
regards
Pascal

Hi Pascal,
Why dont you select those compounding objects in Multiprovider itself.As far as i understand while activating the MP it throws an error if compounding objects are not selected.
One more thing to add which i noticed you can try running the query on analyzer if you are running it on RSRT.
You can see the data even if MP is not active on analyzer but not on RSRT.
Hope it helps.
Regards,
AL

How to suppress the Warning messages while doing GR(MIGO)

Hi ALL,
I have a requirement while posting goods GR/GI using T-code MIGO.
Trying to do GR against PO using MIGO.After selecting the line item quantity and entering BATCH Number for line item Material when I click on 'CHECK' Pushbutton i am Getting the below Warning msg
'For batch RAB001 of material 1522582, no class could be determined'. Message no M7207.
How to suppress this above warning message, I want to Post the goods by suppressing the above warning message .
Like similarly while issuing the goods to the to the Production order using MIGO i am getting warning message when I click on 'CHECK' Pushbutton.
I do want to issue the goods by suppressing warning message in this case also.
I know this could be solved by customization but we are dealing with batch managed materials.
How to suppress the the above warning messages in MIGO through ABAP coding ...
Looking forward the helpfull answer.
Regards,
venky

Hi
Answer is pure assumption.
Pls check the following OSS notes
Note 319094 - Warning message during batch classification in IM
Note 122937 - UD: Error message M7207 when you save
Note 399416 - Message M7207 not analyzed in background
Note 786755 - You cannot suppress message M7 207
Note 201196 - MIGO: Error M7207 for goods receipt for batch
Pls take opinion from SAP / Basis before implementing the OSS note
Regards
Madhan D

Customization - How to suppress Line Weights

Hi,
I want to suppress the Line Weights for all documents by default (a fresh install and all documents are "Line Weights" OFF)
Installation on Windows 8.1 / 7 / XP
Package is Adobe Reader 11.0.0.6 MUI / MSI
I try it with 'Adobe Customization Wizard 11' but i don't know where it is ON by default
Is anyone know how to "suppress / turn off with Customization Wizard ?
Can i turn OFF "Line Weights" by the REGedit or DirectEditor ?
Thank you
Message was edited by: Alexei_11

Hi,
Anyone have an idea ?
Thank You
Alex

How to suppress License Information for multiple logon screen?

Hi,
While LOGIN we will get "License Information for multiple logon screen" will displayed.
How to suppress that screen.
Regards,
Bala

>
bala virupaksha wrote:
> Hi,
>
> While LOGIN we will get "License Information for multiple logon screen" will displayed.
> How to suppress that screen.
>
> Regards,
> Bala
and why would you want to do that?
does your contract with SAP say, that you may use multiple logins for free? would SAP's contract-issue department agree that -in your case- it's not necessary to record multiple logins?
have you read this part of the SAP license policy?
SAP gives express notice that the accessing of a system by more
than one person using one and the same named user constitutes
a breach.
tell me this does not apply to you ...

How to suppress Output Type dialog box at printing time

Hi all,
Can anybody tell me how to suppress the dialog box of Output Type at the time of Print and Print Preview of Smartform through transaction? I mean there will be default for Print or Print Preview.
Thanks,
Manas

hi,
try with this
gs_control-no_dialog = 'X'.
gs_control-preview = 'X'.
gs_control-no_open = 'X'.
gs_control-no_close = 'X'.
call function 'SSF_OPEN'
exporting
control_parameters = gs_control
exceptions
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if not sy-subrc is initial.
exit.
endif.
then call smartform function module after that
call function 'SSF_CLOSE'.
Regards
vasu

How to suppress n/m in FSG with dash

Similar Messages

Maybe you are looking for