How to tell which version of ipad I have?

I would like to know which version of the ipad I have and how to tell if its ipad2 or ipad3 ? I offten get this question but not sure how to properly answr it.

Here's the various iPad model numbers and order numbers. The model numbers are on the back of the iPad
Apple iPad Wi-Fi (Original) 16, 32, 64 GB
The wi-fi only iPad configurations are assigned model number A1219.
MB292LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MB293LL/A and the 64 GB configuration is assigned MB294LL/A.
Apple iPad Wi-Fi/3G/GPS (Original) 16, 32, 64 GB
The Wi-Fi/3G/A-GPS iPad configurations are assigned model number A1337.
MC349LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MC496LL/A and the 64 GB configuration is assigned MC497LL/A.
Apple iPad 2 (Wi-Fi Only) 16, 32, 64 GB
The wi-fi only iPad 2 configurations are assigned model number A1395.
MC769LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC770LL/A and the 64 GB configuration in black is assigned MC916LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC979LL/A, MC980LL/A, and MC981LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC954LL/A and MC989LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/GSM/GPS AT&T) 16, 32, 64 GB
The Wi-Fi/GSM/GPS iPad 2 configurations are assigned model number A1396.
MC773LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC774LL/A and the 64 GB configuration in black is assigned MC775LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC982LL/A, MC983LL/A, and MC984LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC957LL/A and MC992LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/CDMA/GPS Verizon) 16, 32, 64 GB
The Wi-Fi/CDMA/GPS iPad 2 configurations are assigned model number A1397.
MC755LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC763LL/A and the 64 GB configuration in black is assigned MC764LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC985LL/A, MC986LL/A, and MC987LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC755LL/A and MC985LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 3rd Gen (Wi-Fi Only) 16, 32, 64 GB
The Wi-Fi Only iPad 3 configurations are assigned model number A1416
MC705LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC706LL/A and MC707LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD328LL/A, MD329LL/A, and MD330LL/A, respectively.
Apple iPad 3rd Gen (Wi-Fi/4G LTE AT&T/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE AT&T/GPS iPad 3 configurations are assigned model number A1430
MD366LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MD367LL/A and MD368LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD369LL/A, MD370LL/A and MD371LL/A, respectively
Apple iPad 3rd Gen (Wi-Fi/4G LTE Verizon/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE Verizon/GPS iPad 3 configurations are assigned model number A1403
MC733LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC744LL/A and MC756LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD363LL/A, MD364LL/A, and MD365LL/A, respectively.
 Cheers, Tom

Similar Messages

How to tell: Which version of camera raw do I have?

How to tell which version of camera raw I have? The only Google search I found answering this question refers to is 2 years old and seems to no longer apply. There is no File, Edit etc. menu on the new version of Camera Raw with (Photoshop/Bridge CS6). I do use Adobe Application Manager to do my updates telling me if a new version exists or not, nevertheless I would like to know.

The F key works as described for me in CS6-ACR7.4 with ACR as the window with focus. The same function is available using the double-arrow-window icon at the right of the Preview checkbox near the top right of the preview area.
When in full-screen mode there is no title bar, but when I press the F key or click the double-arrow, again, ACR becomes smaller and I can see the title bar that includes the ACR version and camera model. This is on Windows7-64-bit on a 1600x1050 monitor. Perhaps you’re ACR’s title bar is off the top of the screen so you can’t see it, or maybe ACR optimizes some things if you have a smallish display—do you?
A plug-in is a program that interfaces with another program but is not independently runnable application, itself, bit is independently updatable, so in this instance, Photoshop doesn’t need to be downloaded and installed every time Adobe adds support for a few more cameras.

How to tell which version boot camp?

It's such a simple question - *How can I tell which version of Boot Camp my machine is running right now?* - but the answer is oh so elusive...
Get Info on the partition doesn't tell me, About This Mac More Info neither (unless I don't know where to look and somebody can set me straight.) Running through searches at Apple and similar, including forums using (eventually) only the word "version" hasn't helped to figure out how either, nor has Google with a bit more than "version" obviously, else I'd be at it still. And the version on the Boot Camp Assistant.app in Utilities doesn't seem to jibe with anything, much.
Answer?

Thank you. That helps.
Do you know if that's truly the version of Boot Camp itself, or merely the version of the Boot Camp Control panel? Apple doesn't seem to address this anywhere that I can find, but over time I've noticed the different pieces, like the Boot Camp Drivers "bundle" and, in this instance, features like the Boot Camp Control Panel do indeed have different versions. As an example (and for my confusion) on my system the Bootcamp.exe file is version 3.0.0.1 and the product version is 3.0, but "About Boot Camp" from the icon says 3.1 and the Drivers Update 2.1... In the Properties for BootCamp.msi under Comments it says 3.0.0 (and also present is a revision number which doesn't fit its {}.) All this in Windows, of course. In OS X (10.6.4 Snow Leopard) the Boot Camp Assistant.app is version 3.0.1. So, to summarize, I seem to have versions 3.0 and 3.1 concurrently - I'm less worried about the Windows drivers. Those can be updated independently, and I don't use iSight in Windows anyway.

How to tell which version of 1130AP

The Aironet 1130AG Series is available in:
A lightweight version
An autonomous version that can be field-upgraded to lightweight operation
A single-band 802.11g version for use in regulatory domains that do not
allow 802.11a/5 GHz operation
Is this firmware/software only, or is the hardware different.
How do I tell which one I have?
Thanks.

A lightweight version
An autonomous version that can be field-upgraded to lightweight operation
Software.
Do a "dir flash:"
If the IOS is "K9W7" then it's autonomous. If it's "K9W8" or "rcv" then it's LWAP.

How to tell which version of Adobe Reader is installed on iPhone

I can I figure out which version of Adobe Reader is installed on an iPhone?

Hi,
To check the version of Adobe Reader on your iPhone/iPad
Go to your iOS home screen.
Tap Settings.
Scroll down to the bottom to find Adobe Reader or Adobe Acrobat.
Check the version number.
Hope this helps.

How to tell which version of Expresscard on new MBP 17"

How do I find out which version of the ExpressCard slot is installed my MBP? I have a new 17" so I'd like to assume it's the newer version (2.0), but I don't see anything (or don't know where to look) in the System Profiler. No indication on either the Apple website nor in the WIki article on MBPs.
Thanks

Right — the ExpressCard slot isn't a memory card reader (unless one inserts a card reader into it), and is not reported upon by System Profiler unless a device is present in it. I have an ExpressCard slot and nothing to put in it, so I can't get any information at all about it.

Basic Question - How to check which version of XMLP I have ?

I have seen several posts mentioning few features work from XMLP 5.5
Where would i check which version we have ?

Hi,
Run the following query to find the version installed.
SELECT DECODE(bug_number
,'3120489', '3.5.0 Installed'
,'3395631', '4.3.0 Installed'
,'3554612', '4.5.0 Installed'
,'3822219', '5.0.0 Installed'
,'4236958', '5.0.1 Installed'
,'4206181', '5.5.0 Installed'
,'4561451', '5.6.0 Installed'
,'4905678', '5.6.1 Installed'
,'5097966', '5.6.2 Installed'
,'5472959', '5.6.3 Installed'
FROM ad_bugs
WHERE bug_number IN
'3120489'
,'3395631'
,'3554612'
,'3822219'
,'4236958'
,'4206181'
,'4561451'
,'4905678'
,'5097966'
,'5472959');

How to determine which version of USB I have

I was just trying to figure which version of USB my Powerbook Aluminum 1.25GHZ 167 MHZ it has firewire 800 is there an easy way to figure this out. Thanks for all of your help.

Awesome thanks for all of your help.

How to tell which version of Mac OS X is installed?

I'm not sure this is the best category for this question but I wasn't sure which area would be the best.
Let's say I have a hard drive attached to my mac (via firewire or usb) and I want to ascertain what version of Mac OS X is installed on it. Is there some way I can look directly into the files to tell? I realize I could look at System Preferences-> Startup Disk. But let's say there is an early version of Mac OS X on the drive and it doesn't show up in the Preference Pane because it wont boot that particular machine.
I hope I haven't made this question more obtuse than it needs to be.
Thanks.

If you open /System/Library/CoreServices, you'll find the Finder app. Get info on it and it will be close to the System version. There might be somewhere on the Web that cross-references the Finder version to the OS version.

How to tell which version my board is?

Hi there,
I have to upgrade my BIOS, as I am having issues related to a new graphics card.
I bought my mobo secondhand from someone online, so I dont know exactly what make and model it is. I think it is this one:
http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=203#
But since I didnt buy it I am not 100% sure. Is here any way I can check from the board to find out for certain what model it is?
I need to be certain which one it is before I flash it.
Cheers

Look here how to ID your mainboard: https://forum-en.msi.com/index.php?topic=113146.0
Also read >>Posting Guide<< and provide full system specification then explain the issue which you have.

How to tell which version of OBIEE I am currently using

Hi,
I am patching OBIEE on a server but no-one knows what version it is running. I can't seem to find the exact version anywhere. I know the release is 11.1.1.6 but that is all.
Many thanks,
Russell

Login to Analytics/Answers preferably with the Administrator (generally weblogic) user and click on Administration. You should see the version on the top of the page.
Hope this helps.

How do i tell which version of iMovie I have?

If I have iMovie '09 installed, what does the version number in the info panel say? What is the most recent version of iMovie '09? I have three iMovie apps installed:
iMovie HD.app 85.5 MB version 6.0.3
iMovie.app 256.2 MB version 8.0.6
iMovie.app 129 MB version 7.1.4
I installed iLife '09 but I don't have any apps with '09 in the file name on my computer.

What is the most recent version of iMovie '09?
8.0.6.
(51075)

How doI find which version of jave I have

how do I find out which updates of Java SE Runtime Environment 6.0 I have installed and where do I get the latest update for my macbook pro with OS X 10.7?

How to Check Your Java Version (MAC)

How to tell which model G3 powerbook I have?

I recently purchased an older PowerBook G3 Series, but I don't have a Power Supply for it. Additionally, since the currently installed battery is dead (no charge on it), I don't have power to boot it up and use the system profiler to help me, either. Thus, I'm not completely positive of the specific model/processor I have, and I can't power it up to find out. So I don't know which model power supply to purchase. I've tried to get the specs by using the Apple Serial number, but when I type the serial number in at Apple's website, the website doesn't recognize the serial number (CK8191M8CVA). Just as a note here, this is the original serial number from the botton of the case ID tag. Just wanted to add that last bit of info to this post, in the hopes someone knows how to how to find out the answer to that question. That's for youe info.
Ernest Banz ([email protected])

Hi. First, if the Apple product is 7 years or older, it won't find the info on the machine on Apple Support. Try to find the Model number on the bottom of the PowerBook (an example: M2453 is the Original iBook). Then many places such as www.lowendmac.com or www.everymac.com have the info on the PowerBook. Also, to make it easier to search, do you know what type of PowerBook G3 it is? It could be the Original G3, Pismo, Wallstreet, or Lombard. Hope this helps!

Unstructured Name Parser - How to tell which Classification or Reclassification rules have been applied to a Name

I am using the EDQ Unstructured Name Parser and have a Name value that isn't getting parsed. I would like to know how the engine is classifying it or reclassifying it in order to set up some reclassification rules of my own to ensure that it gets resolved correctly.
The name is something like Thomas J. Hamilton,Jr ... I would expect it to classify as <valid Given>_<valid Initial>_<valid Family><P><valid Suff>. Given a data record, how can I trace it back to see how it was classified and resolved?

Hi Aaron,
For starters, you can change the parser to run in "Parse and Profile" mode in the Advanced Settings in order to output more intermediate metadata. Then I'd recommend filtering the data going into parser to isolate the record you're interested in. Either sample data in the reader in the run preferences or just insert a value check processor before the Parser.
Run the process through against and then look at the various steps of parsing in the different tabs of the results browser (Base tokenization, classification, unclassified tokens, etc.)
regards,
Nick

How to tell which version of ipad I have?

Similar Messages

Maybe you are looking for