How to terminate Windows dial-up Network session

Need help terminating a Windows dial-up network session from my Java application demo. The application runs on an unattended PC and periodically initiates a Dial-Up networking session, in order to send an email.
I'm binding a Process variable to the output from...
<runtime>.exec("rundll rnaui.dll,RnaDial <DU name>")
The Windows dial-up session starts OK and the mail message is successfully sent. However, when I try to terminate the dial-up session using...
<process>.destroy()
...it does not terminate the Windows dial-up session.

You can use the JDUN API (Java Dial-up Networking) that can be found at http://www.JavaAPIs.com. It supports enumerating RAS dial-up entry names, dialing entries, and hanging up entries.

Similar Messages

Pearl 9100 OS 6 Dial-Up Networking DUN (How can this be done with Telstra) Wireless Modem for Mac

Hi
I would like to know how i can have dial-up networking (Using my Pearl 9100 OS 6 as a wireless modem for my Macbook Pro 6.2) and also the information that has to be applied for Telstra Australia..
Thankyou
Solved!
Go to Solution.

Hi and Welcome to the Community!
Refer:
KB19641 How to Configure a BlackBerry smartphone as a tethered modem on a Mac
Note carefully please that this feature requires your service plan to include the capability...not all service plan levels include it, and not all carriers offer it. Further, sometimes additional software for your computer must be obtained from the carrier. But, any and all carrier-specific questions about this must be addressed to the carrier...here, we can only give you the generic information...your carrier must provide you with any specific information required.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to Terminate the session of a user who is currently editing a program??

Hi Folks!
I have a question. If there are no of users working on SAP netweaver system with same username and password. If a user is currently editing a program. How to terminate that session so that can re-edit the same program??
Thanks for your help.

Via SM04 or logout yourself and login again. On pop-up window mark correct checkbox.

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

What printer? What router?
Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to enable DDE communication and Network DDE DSDM on windows 7

How to enable DDE communication and Network DDE DSDM on windows 7

Hi,
For Network DDE to function, NetDDE.EXE needs to be installed and running on both machines before attempting to conduct a Network DDE conversation. NetDDE.exe is a Windows Service system file that is used to communicate the shared dynamic data exchange used
by Network DDE. It has no graphical user interface (it runs as a background Windows service).
For more information, please refer to this article:
http://www.citect-webhelp.schneider-electric.com/vijeo/Content/Starting_network_DDE_services.html
http://support.ge-ip.com/support/index?page=kbchannel&id=S:KB15377&actp=search
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

How to have my dial up connection added to the network utility program?

how to have my dial up connection added to the network utility program for monitoring? though i am connected by dial-up, the connection is not monitored by the utility program. the drop down box there does not show the modem at all. ?

Huh? I don't understand what you are asking. I just pulled up the network utility and I don't see what kind of connection monitoring it does for any kind of connection? What kind of information are you looking to obtain? What problem are you interested in solving by having your question answered?

How can we link the Apple iPad or any Apple device to window's based network/server?

how can we link the Apple iPad or any Apple device to window's based network/server?
we are software development company !
how to use apache developed web site from windows pc in aaple i-pad
and testing that perticuller web site on windows network !
ipad software version 5.0.1 !
How We Open developed web site in safari browser from i-pad !

No ... won't work.
If this is iPad is a first generation, the iOS should be 5.1.1.

How do terminat an IVI session manually

Hello,
I am working with a very simple instrument that rotates a wheel to one of six positions. The manufacturer used a set of IVI based drivers. I am so far ignorant of IVI tools. From what I gather, using IVI drivers this allows them to handle any similar instrument without developing new vi's. Sounds reasonable.
The issue is when I do something stupid like running non-looped vi's using the repetitive run. I only do this for developement purposes to prevent having to keep hitting the run button. However it is possible to hit the abort button and occasionally leaves the session open instead of cleaning up properly. The message I get is
Driver Status: (Hex 0xBFFF00A6) The connection for the given session has been lost.
Primary Error: (Hex 0xBFFA1190) The session handle is not valid.
With standard drivers I seem to be able to do this and have no problems no matter how I terminate.
So what is different about an IVI session that allows the session to hang and how do I clear a hung session without having to close Labview? Is it even possible? Or do I just have to be smart and put a temporary while loop around everything using an IVI just for repetitive testing?
Thanks,
IVI Clueless.
David A. Taylor

Wouldn't I have put a while loop around it with the stop button wired to the stop condition? That works fine, I just have to clean it up when I'm done.
Thanks for your help!
David A. Taylor

HT201250 how to join windows network

how to jon windows network

I'm not aware of any particular tie-in between Windows 7 and Domain Controller and Samba and OS X Server Open Directory LDAP Services.
Samba did provide limited Domain Controller capabilities and can use Domain Authentication, but the Apple installation from 10.6 is an old release and I've had some problems getting that older stuff to work. You'll likely have to hand-manage Samba to get this to work, by following the directions at the Samba.org web site, too.
The best resource I've encountered for digging around in this topic area is the archives of the Mac Enterprise mailing list.
FWIW, Microsoft has (migrated from? abandoned? deprecated?) Domain Controller authentication in favor of Active Directory some years ago, and Apple has abandoned Samba in more recent releases; this is a dead end. If you are using Windows Server and Active Directory, then OS X Server can be configured in what's called a Magic Triangle configuration; where you have Windows handling Windows authentication, and OS X Server handling OS X authentication, and coordinating across the two. Or (with newer OS X releases) Apple has improved integration with Active Directory.

Dial-up networking implementation

Hi,
I'm currently developing an application that requires dial-up to a RAS server. Client hardware requirements for this app are windows box with either USB/Serial modem or ISDN connection.
Client app will be driven with Swing GUI but I need help on the dial-up part.
My questions are:
1. What kind of technology JAVA provides in regards to dial-up programming? I've considered commAPI but apparently this only work for serial modems only.
2. Can I use JTAPI to setup the dial-up and connection with either modem or ISDN?
3. Or can I use JNI to call windows native dial-up control from my application? If so how?
Glad if someone out there can at answer part of my queries?
Thanks

You can use the JDUN API (Java Dial-up Networking For Windows) that can be found at http://www.JavaAPIs.com. It supports enumerating RAS dial-up entry names, dialing entries, and hanging up entries.

Windows Azure Virtual Network - Access is denied Error 0x80070005

Installed a Virtual Network, all options default, setup Gateway, created and uploaded Certs, downloaded 64 bit VPN client. Windows 7, fully patched, AV client disabled.
When I attempt to connect I get:
Access is denied.
(Error 0x80070005) For customized troubleshooting information for this connection, click Help
I see many similar posts, but no answers. Has anyone gotten Point-to-Site to connect? Is this not supported in the free trial and MSDN accounts?
Operating System      : Windows NT 6.1 Service Pack 1
Dialer Version        : 7.2.7600.16385
Connection Name       : 84810c9d-721a-4e79-abca-29ad922735c2
All Users/Single User : Single User
Start Date/Time       : 11/8/2013, 13:50:17
Module Name, Time, Log ID, Log Item Name, Other Info
For Connection Type, 0=dial-up, 1=VPN, 2=VPN over dial-up
[cmdial32] 13:50:17 03 Pre-Init Event CallingProcess = C:\Windows\Explorer.EXE
[cmdial32] 13:50:25 04 Pre-Connect Event ConnectionType = 1
[cmdial32] 13:50:25 06 Pre-Tunnel Event UserName = Domain = DUNSetting = 84810c9d-721a-4e79-abca-29ad922735c2 Tunnel DeviceName = TunnelAddress = azuregateway-84810c9d-721a-4e79-abca-29ad922735c2-0.cloudapp.net
[cmdial32] 13:50:29 21 On-Error Event ErrorCode = -2147024891 ErrorSource = RAS
Other users with a similar issue:
http://stackoverflow.com/questions/16320918/windows-azure-virtual-network-point-to-site-connection-error
Still more:691
Access denied because username and/or password is invalid on the domain.
How does username and/or password make any sense? It hasn't asked for any credentials, it just fails.

Hi,
Thanks for your response.
Did you configure the Point-to-Site virtual network using this article?
Configure a Point-to-Site VPN in the Management Portal
http://msdn.microsoft.com/en-US/library/windowsazure/dn133792.aspx
After the virtual network is created, you may create the gateway as the link mentioned.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How Do I Setup a Wireless Network in my home for 3 Mac's and 2 PC's

Ok..... I live with 5 people and we all have computers. I'm looking to setup a Wireless Network in our house that would allow all of us to access the Internet from our various rooms. Currently we have 3 MAC (a G5 Desktop, a regular Desktop, and a Powergook G4 with airport extreme), and 2 Window's based PC Laptops. So far everyone is using DSL, with the exception of myself. I sit in the back yard accessing the neighbors wireless network. That ***** and I feel like I'm stealing.
How would I go about setting up a Wireless network for all of these computers, and what equipment would I need to accomplish this?
Powerbook G4 Mac OS X (10.4.6)

First thing you need is a wireless router. You mentioned Airport Extreme---not sure if you are speaking about the card in the PB, or an actual router. Bottom line is that you need a wireless router. Airports will work with Windows, and Netgear is another good option as they are Mac friendly. Then, any computers that don't have wireless card will need to have one--unless you connect them directly with an ethernet cable. Get the IP addresses of all of the computers on the network. In Windows, go to Start-My Network Places-View Network Connections, then highlight the LAN that is displayed. With it highlighted, go to the "details" window and open the drop down menu if it is not open already. Write down the IP address. Then, go to the Macs you have, click on Finder--Go--Connect to server. Type in the IP address with smb:// in front and / at the end--will look something like this smb://192.xxx.x.xx/ Then select connect. Make sure you know the username and passwords of the computers as it will ask for these. To share the files from the Mac to the Windows, just follow these directions: You can set up your Mac so that you can share files with Windows computer users.
To allow Windows users to connect to your computer, you need to turn on Windows Sharing. When you turn on Windows Sharing, Mac OS X uses the Samba server software to provide SMB/CIFS file services.
You also need to give the Windows users the network address of your computer, and a user name and password of a user account on your computer.
Open System Preferences and click Sharing and, if necessary, click Services.
Select Windows Sharing in the list, then click Start.
Click Accounts and select the name of the user account that will share files. Enter the password for that user.
Look below the services list for your computer's network address. Give this address to Windows users.
You can provide users with the user name and password of any account on your computer. To help keep your computer secure, you may want to create a special account for Windows users in Accounts preferences.
Because passwords of the user accounts for Windows are stored insecurely, turn off the account when it is not being used. Before you turn off Windows Sharing, turn off all the accounts you enabled. Otherwise, the passwords are still stored insecurely.
If you want to use a user account that existed before you installed Mac OS X Panther, you may need to reset the password for the account using Accounts preferences.
Any of this info can also be found in the help files in the Finder. Hope this helps.

How to set a variable in portal session using web dynpro java.

Hi,
I have created a web dynpro application, which is running inside portal. I have created a role called "R1". Inside role R1, i have created 3 workset W1, W2 and W3. and inside each workset i have some pages and iviews.
My requirement is when user logins to the portal , and when he clicks on role R1 for the first time, a login page should come (so that we can do revalidation), and when he enters his password again in that login page , then only workset W1, W2 and W3 should be visible/accessible to him and after successful revalidation, if he clicks again on role R1, in that particular portal session, than that login page should not come.
for this, i thought i will set a variable in portal session, whenever user successfully revalidated himself, and if after successful revalidation he clicks again on role R1, i will check in doinit method of webdynpro whether variable is set or not (which i already set on successful revalidation), and if it is set then i will do Donavigation else i will present login page to the user.
Can anyone tells me how to set a variable in portal session using web dynpro java.
thanks
Arush

Hi,
Try this:
WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE, key, value)
WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE, key)
Ex:
WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE,"Key1","Value1");
String value1=WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE,"Key1").toString();
/people/william.cui/blog/2007/02/12/sharing-session-context-between-parent-and-external-windows-running-on-same-host
Regards,
Charan

HOW to get Windows 7 installed on HP Pavilion 15 15-E028US 15-E1X73UA E1X73UA / E028US

Im just posting this to save the agony i went through trying to find correct windows 7 64 Bit drivers. hopefully this will save many people time since alot of people downgrade from windows 8 to windows 7. This is how i got Windows 7 installed on the HP Pavilion 15 15-E028US 15-E1X73UA E1X73UA / E028US notebook / laptop .
I installed the following drivers in the FOLLOWING ORDER: i only reason i would install in the following ordre is because i had problems installing the USB 3.0 drivers, but if you install in this order the USB 3.0 drivers should install fine.
NOTE: i tried this with the 64 bit version of win7 and it worked fine, i didnt have time to try with 32 bit win7.
1) AMD CHIPSET DRIVERS
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2 and download
http://www2.ati.com/drivers/13-4_vista_win7_win8_32-64_sb.exe
2) AMD Catalyst Notebook Display Driver ( Radeon HD 8450G )
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx and download
http://www2.ati.com/drivers/beta/amd_catalyst_13.10_mobility_beta.exe
3) ETHERNET CONTROLLER - Realtek Ethernet Controller Driver
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32... and download sp61473.exe
4) NETWORK CONTROLLER - Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32... and download sp61518.exe
5) PCI DEVICE - Realtek PCIe Media Card Reader Driver
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32... and download sp61420.exe
6) UKNOWN DEVICE - HP 3D DriveGuard Software
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117749-1&cc=us&dlc=en&lc=en... and download
sp61291.exe
REBOOT YOUR MACHINE AT THIS POINT before installing the USB drivers below
7) AND FINALLY THE USB CONTOLLER AMD USB 3.0 Host Controller Driver (just put checkmarks next to the USB drivers (32bit & 64bit)
http://download.lenovo.com/consumer/mobiles/acpvga118w7.exe
This below is just for reference of my Device ID for the USB HOST CONTROLLER
PCI\VEN_1022&DEV_7814&SUBSYS_1982103C&REV_09
PCI\VEN_1022&DEV_7814&SUBSYS_1982103C
PCI\VEN_1022&DEV_7814&CC_0C0330
PCI\VEN_1022&DEV_7814&CC_0C03
keywords: downgrade windows7 notebook laptop E1X73UA/E028US

youre very welcome, thanks for taking the time to say thanks!! just trying to help few peeps out

Exception ORA-12537: Network Session: End of file, Oracle.ManagedDataAccess

My environment:
> Oracle 11g expression edition in Win7 ("DevDB")
> Oracle 11g in non-Windows platform ("ProDB")
> Oracle.ManagedDataAccess.dll (file version is 4.121.1.0, product version is 4.121.1.20131211)
> Instant client sqlplus
If I use sqlplus to connect "DevDB" and "ProDB" with following command, both DBs can be connected successfully.
> sqlplus someUser@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx.xxx.xxx)(PORT=1521))(CONNECT_DATA=(SID=DBSID)))
If I use following codes with Oracle.ManagedDataAccess.dll to connect DBs.
string connectionString = "User Id=someUser;Password=somePwd;Data Source=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx.xxx.xxx)(PORT=1521))(CONNECT_DATA=(SID=DBSID)))";
OracleConnection con = new OracleConnection(connectionString);
try{
con.Open();
} catch (Exception e) {
Console.WriteLine(e.Message);
Console.WriteLine(e.StackTrace);
} finally {
if (con != null)
con.Dispose();
It can connect to "DevDB" successfully. However, when I try to connect "ProDB", it throws following exception.
ORA-12537: Network Session: End of file
   at OracleInternal.ConnectionPool.PoolManager`3.CreateNewPR(Int32 reqCount, Boolean bForPoolPopulation, ConnectionString csWithDiffOrNewPwd, String instanceName)
   at OracleInternal.ConnectionPool.PoolManager`3.Get(ConnectionString csWithDiffOrNewPwd, Boolean bGetForApp, String affinityInstanceName, Boolean bForceMatch)
   at OracleInternal.ConnectionPool.OraclePoolManager.Get(ConnectionString csWithNewPassword, Boolean bGetForApp, String affinityInstanceName, Boolean bForceMatch)
   at OracleInternal.ConnectionPool.OracleConnectionDispenser`3.Get(ConnectionString cs, PM conPM, ConnectionString pmCS, SecureString securedPassword, SecureString securedProxyPassword)
   at Oracle.ManagedDataAccess.Client.OracleConnection.Open()
Any tips to fix this problem?
Thanks

I added following settings in app.config file
<configSections>
    <section name="oracle.manageddataaccess.client" type="OracleInternal.Common.ODPMSectionHandler, Oracle.ManagedDataAccess" />
</configSections>
<oracle.manageddataaccess.client>
    <version number="*">
      <settings>
        <setting name="SQLNET.AUTHENTICATION_SERVICES" value="all"/>
        <setting name="NAMES.DIRECTORY_PATH" value="ezconnect"/>
      </settings>
    </version>
</oracle.manageddataaccess.client>
Still failed, sometimes it throws "ORA-12537: Network Session: End of file", sometimes throws "ORA-03135: Connection lost contact".
As ORA-12537 after change to Oracle.ManagedDataAcess.dll mentioned, it works without any problem with the unmanaged library.Please advice, thx.

How to terminate Windows dial-up Network session

Similar Messages

Maybe you are looking for