How to trace VISA-messages of LV-runtime-program?
Hello,
i have a windows 7 system with a labview-runtime-program. Installed is only labview runtime 2009 and visa runtime 4.0. (The program controls an instrument over VISA).
What do i have to install additionally to trace the messages that are send from the runtime-program to the instrument?
On my other computer there i have NI-Max where i have someting in the Tools-menue.
So i thought i just install also MAX from the DeviceDrivers-CD.... Now i have MAX installed but everything is empty (No Tools, no SW is displayed, no instruments).
Do i have to install also NI VISA? I tried to install VISA 4.02 but this is not compatible to Windows 7.
Thanks for help
best regards
NI I/O Trace cannot be installed separately. It comes bundled with various NI drivers. You will need the full version of VISA to install trace. There may be Licenses fees. Contact your local NI Rep
Jeff
Similar Messages
-
How to trace the message in which line of program used?
Dear fellows,
Many times when we run a t-code (especially standard t-code), it will return many message log. but when we debug the t-code to trace the error message, it is difficult to find why raise this error message. Even we can not find in which line of program. We can not use the where-to-used list in SE91 to trace, because it is not written like this: message 033(FD) TYPE E.
For example in validation(GGB0) we use some message, but when this message come out, we didn't know this message in which program raise. And it also can not be traced using message at in debug mode.
In many case, the way of using message is not easy to be trace , but if we can find which line of program to raise this message, would help a lot for finding the cause problem.
Is there any tool for us to trace message ?
Thanks for your sincerely answer!Hello All,
If the message log is filled like this
L_S_MSG-MSGTY = 'E'.
L_S_MSG-MSGID = 'BL'.
L_S_MSG-MSGNO = '303'.
L_S_MSG-MSGV1 = '007'.
Can you trace this message by putting a watch-point/break point? I guess no! If some has YES as answer, please feel free to correct me.
That is why whenever filling a message log/return table it is important that we ensure that the message can be traced back using "where-used". Hence the usage of MESSAGE...INTO (or the pre-historic, IF 1 = 2 ... MESSAGE ... ENDIF) construct.
BR,
Suhas -
How user trace the message created in Satellite System
HI All,
I'm using Servide Desk in my company. Just wondering how user can trace the progress of the message created where email notification is not configured.
Remember when user send/save the message, there's a message number created. Just wonder any center/ transaction code user can trace the progress and have a visible view on the message ON THE SATELLITE System, not in SOLMAN.
Thanks,
NIcholas Chang>
Nicholas Chang wrote:
> Hi All,
>
> What standard F4 help screen should i modify and from where should i start? Could you please enlighten me on what function or program that this F4 help screen bind to? I need to know the function/program in order for my abaper to work on this.
>
> Also, i just wondering is every user able to create message in Satellite System under Help -> Create Message? According to the SOLMAN Security Guide, it mention user with role SAP_SUPPDESK_CREATE are able to create message but i've and created and tested with a restricted profile user without SAP_SUPPDESK_CREATE role, and it still manage to create message.
>
> I've completed the SOLMAN SD setup and currently tryin to fine tune it.
>
> Your help is very much appreciated.
>
> Thanks!
> Nicholas
Hi Nicholas
If you are using a "Named" user instead of the Trusted Relationship in the RFC maintained in BCOS_CUST for entry OSS_MSG then this is quite possible. In this case the "Named" user will be used to call the interface to create message and the calling user ie the end user creating the ticket will only be used as "Reporter" of the message.
Regards
Amit -
How can we pick Message ID at runtime in message mapping?
Hi Experts,
I am working on a file to file Scenario.
Lets say I have a Field called SEQ_NO at target.
I want to populate it this with Message ID (MONI one) at runtime.
Is it possible? If Yes, How can we do this?Hi,
No It is not working fine.
Inside TEST----
> Parameter Tab< I had input MESSAGE_ID Against MessageId.
After that I run It, Got the error as Below:
17:48:17 Start of test
Runtime exception during processing target field mapping /ns0:MT_BANK_CUST_DET/File_Out/Header/SEQNO. The message is: Exception:[java.lang.StringIndexOutOfBoundsException] in class com.sap.aii.mappingtool.flib3.TextFunctions method substring[, com.sap.aii.mappingtool.tf3.rt.Context@6ec66ec6] com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:MT_BANK_CUST_DET/File_Out/Header/SEQNO. The message is: Exception:[java.lang.StringIndexOutOfBoundsException] in class com.sap.aii.mappingtool.flib3.TextFunctions method substring[, com.sap.aii.mappingtool.tf3.rt.Context@6ec66ec6].
It is possible to get MESSAGE ID which we get in MONI for every message pass throught XI in message mapping itself?
Regards
Pradeep -
How to show error message in a report program
Hello Guys,
I am making a report using smartforms. I am successful in showing data but problem is if if i put a value in parameters that does not exist is database, the smartform runs and related fields shows as empty fields. But the form is running. I want to show error message if the parameter values dose not matches with the database values. The message will show as Document not exists
So i used related error msg here like
if sy-subrc ne 0.
message e357.
endif.
But it is not working for passing values to smartform. It works if i use in classical report. Plz help me on this issue.
Thanks,
Rosaline.>
Rosaline. wrote:
> Thanks all for reply. Should i have to use message before call function 'SSF_FUNCTION_MODULE_NAME' ? I tried it but not working.
>
>
if it_final[] is not initial.
>* if sy-subrc ne 0. ---> "Remove this condition check, it not required
> Message e000(8i) with 'Parameter value not found'.
> endif.
> * endif. ---> "remove this
>
Hi,
Sy-subrc doesnt need to be validated here, remove that If condition and check again.
Regards,
Karthik D -
How to trace the change log for a program ? both local and release versions.
Hi experts,
I encounter a very strange problem.
I changed a program, created a new version TR, , there are three versions before my version which are all have been released.
but there is one sentence which is not added by me, could anyone tell me how to find the reason why the sentence in my version.
Any help would be apprecite!
BR,
SummerHi,
Not all the 3 TRs
Goto SE03, Click on Find Requests under Requests/Tasks section.
Give all the 3 requests names in Requests/Tasks, Give User name as *
See any sub tasks are there in the above requests by double clicking on each request.
Or
Goto SE03
Click on Search for Objects in Requests/Tasks under Objects in Requests
Select the first entry R3TR PROG give the program name.
In below Request/Task Selection , check the status Released.
See what all Requests are displayed, who are all the persons who changed them.
Thanks & Regards
Bala Krishna -
My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
photoshop elements 10 won't start. Message is. 'Runtime error. Application has requested the runtime to terminate in an unusual way. Please contact support team for more information' 'microsoft Visual C Runtime Library. How do I fix this or can I just uninstal and then re-instal (without losing my spare licence that I want to use elsewhere) It is a PC not a Mac
See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows -
Hi,
I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?Click here and follow the instructions.
(99025) -
How to format/send VISA messages in 'C' for PXI
How do I format/send VISA commands to a PXI Switch device such as
- niSwitch_InitWithTopology(instr, topology, VI_FALSE, VI_TRUE, &switchSession); using ANSI C ? How do I query the result ?
I am able to use VISA commands to Open, Find Resources etc., but I would like to use VISA (message based) commands to perform various functions such as Self-Test, MakeConnection etc. I am using ANSI C under VC++. I am new to PXI and VISA and I tried to make this work using the following snippet, but get nonsensical results.
viPrintf (instr, "niSwitch_InitWithTopology(instr, topology, VI_FALSE, VI_TRUE, &switchSession)\n");
viPrintf (instr,"niSwitch_self_test (instr, &SelfTestResult, testMessage)\n");
viScanf (instr, "%s", testMessage);
Thanks in advance for any help.Hi pxi_user,
A function with a C Function Prototype such as:
ViStatus niSwitch_InitWithTopology (ViRsrc resourceName, ViConstString topology, ViBoolean simulate, ViBoolean resetDevice, ViSession* vi);
returns whether or not the function was successful. This is stored in a ViStatus variable. This, I am guessing, is what you are interested in.
Please check out some C Examples to see how we perform error handling. Normally, in our example VIs, we will use the method outlined in niSwitchErrorHandler. Please view this program and then another that shows its use. I would recommend the C programs located in the following folders:
C:\Program Files\IVI\Drivers\niSwitch\Examples\CVI\niSwitchErrorHandler
C:\Program Files\IVI\Drivers\niSwitch\Examples\CVI\niSwitchControllingAnIndividualRelay
In the end, the function will look something like below:
niSwitchCheckErr(niSwitch_InitWithTopology(resourceName, topology, VI_FALSE, VI_TRUE, &switchSession));
If this does not assist you, please let me know what the results you are currently getting look like. Thanks!
Chad AE
Applications Engineer -
How do I suppress the "Outdated Java Runtime Environment" message?
Hi,
Does anyone know how I can suppress this "Outdated Java Runtime Environment" message?
I'm currently running 1.4.2.12 alongside the latest version of 1.6.x
Each time I start an applet coded to run with 1.4.2.12 a security warning appears titled "Outdated Java Runtime Environment" saying that:
"A Java applet in this webpage requires the Java Runtime Envronment (JRE 1.4.2 to run. You have JRE 1.4.2 installed, but not the latest release. Using an old release may present security risks. Do you want to run the applet anyway?"
YES / NO
I don't want to upgrade to 1.4.2.19 and this problem will occur again is 1.4.2.20 arrvies...
So how can I suppress this warning message?
I can't see anything in the registry under HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy that can be turned off.
I've tried the obvious:
EnableAutoUpdateCheck = 0
EnaleJavaUpdate = 0
Update schedule = 0
In fact, everything under "Policy" has been set to "0"
Any ideas? Is there an unknown registry switch or something that can be added to the startup script that turns off this version/security check?
Any advice would be useful.While looking for something else, I accidentally found the following message:
[t-5253971]
The 3rd post in that thread (i.e. the 2nd reply) claims to have an answer. I haven't tried it (though if you do try it I would be interested to know if it works). -
How to add source message filed value in dynamic generated xml file ??
Hi Friends..
in my idoc to file....
i want to add one of my source idoc fields value in the dynamic generated file....
filename _field.xml...
so how to get that filed value in java section ...
i am not using that field in mapping..
please help me...
regards
ramHi,
<i> <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- <!-- ************************************
-->
<Trace level="1" type="T">User: s_ra</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="2" type="T">Tunneling needed?</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="3" type="T">Sender Interface</Trace>
<Trace level="3" type="T">IORDER.IORDER01 urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPSRD</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_STRUCTURE_GET Details</Trace>
<Trace level="2" type="T">Port : SAPSRD</Trace>
<Trace level="2" type="T">IDoctyp : IORDER01</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">RFCDest :</Trace>
<Trace level="2" type="T">Release : 640</Trace>
<Trace level="2" type="T">Version : 3</Trace>
<Trace level="2" type="T">Direct : 1</Trace>
<Trace level="2" type="T">SAPREL : 640</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_SYNTAX_CHECK</Trace>
<Trace level="2" type="T">Port : SAPSRD</Trace>
<Trace level="2" type="T">IDoctyp : IORDER01</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">Create XML-Control Record</Trace>
<Trace level="2" type="T">Create XML-Data Records</Trace>
<Trace level="3" type="T">Create data Record E1ORHDR</Trace>
<Trace level="3" type="T">Create data Record E1OROPR</Trace>
</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="2" type="T">Set Sender Routing-object</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = s_ra</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:28Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = 4580F8399E23011E000000000A967130</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 4580F8399E23011E000000000A967130</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 4580F8399E23011E000000000A967130</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = s_ra</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="3" type="T">...create rule engine</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 2</Trace>
<Trace level="2" type="T">......extracting (new) for Extractor: XP /IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL</Trace>
<Trace level="2" type="T">......extracting values found: 1</Trace>
<Trace level="2" type="T">...invalid Receiver: - BS_FTP_MES_2_WorkOrder_Create</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 2</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 1</Trace>
<Trace level="2" type="T">...valid Receiver with Condition: - BS_FTP_MES_1_WorkOrder_Create</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 3</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 3</Trace>
<Trace level="2" type="T">...invalid Receiver: - BS_FTP_MES_3_WorkOrder_Create</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 4</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 4</Trace>
<Trace level="2" type="T">...invalid Receiver: - BS_FTP_MES_4_WorkOrder_Create</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_FTP_MES_1_WorkOrder_Create MI_IN_MES_WorkOrderCreation</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_IN_MES_WorkOrderCreation</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOR1__0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = s_ra</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Append context with name =SNDPOR and value =SAPSRD</Trace>
<Trace level="3" type="T">Append context with name =SNDPRN and value =SRDCLNT400</Trace>
<Trace level="3" type="T">Append context with name =SNDPRT and value =LS</Trace>
<Trace level="3" type="T">Append context with name =RCVPOR and value =SAPDGX</Trace>
<Trace level="3" type="T">Append context with name =RCVPRN and value =DGX100</Trace>
<Trace level="3" type="T">Append context with name =RCVPRT and value =LS</Trace>
<Trace level="3" type="T">Append context with name =MESTYP and value =IORDER</Trace>
<Trace level="3" type="T">Append context with name =IDOCTYP and value =IORDER01</Trace>
<Trace level="3" type="T">Append context with name =CIMTYP and value =</Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 6FF8D506C84B3050B127F2EF024B796F</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping B2CF8EF067FF11DBA742D7830A967135</Trace>
<Trace level="1" type="T">Interface Mapping http://aaaa.com/xi/SAP_ERP_azar/PPE/ERP_MES IM_SAP_IORDER_To_WorkOrder_Creation</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPSRD ) ( http://sap.com/xi/XI/System/IDoc SNDPRN SRDCLNT400 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPOR SAPDGX ) ( http://sap.com/xi/XI/System/IDoc RCVPRN DGX100 ) ( http://sap.com/xi/XI/System/IDoc RCVPRT LS ) ( http://sap.com/xi/XI/System/IDoc MESTYP IORDER ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP IORDER01 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP )</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_.</Trace>
<Trace level="3" type="T">Load b2cf8ef0-67ff-11db-a742-d7830a967135, http://aaaa.com/xi/SAP_ERP_azar/PPE/ERP_MES, -1, com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_.class (http://aaaa.com/xi/SAP_ERP_azar/PPE/ERP_MES, -1) in swcv b2cf8ef0-67ff-11db-a742-d7830a967135.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:357) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Caused by: java.lang.IllegalArgumentException: Cannot cast null to boolean at com.sap.aii.mappingtool.flib3.Bool.toBoolean(Bool.java:17) at com.sap.aii.mappingtool.flib3.Bool.equals(Bool.java:37) ... 37 more</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322]</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:357) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Caused by: java.lang.IllegalArgumentException: Cannot cast null to boolean at com.sap.aii.mappingtool.flib3.Bool.toBoolean(Bool.java:17) at com.sap.aii.m -
Dataloss in network... How to trace it..?
Hi,
Though this question is related to SAP XI and SMICM trace, I feel this question can also be answered by people in WebAs General, so i am posting this in this forum.
In my current scenario where SAP XI system pushes data to another system(ABC system) using HTTPS connection. I have set up an RFC destination of Type G to connect to the external system.
When i do a Test connection, i see in SMICM log file, i found that connection established, request message written into ABC system.When response is being written i could find BINDUMP of content denied in the SMICM log file. What does that exactly mean..?
Also When i contacted the other party--ABC, they have told that they could not see any messages in their system.
XI shows successfully processed and ABC system did not receive the message... So where did the data go?? I have no clue :-(( Need your inputs in this regard. How to trace if the message has been successfully posted by XI. Below is the SMICM log file.
[Thr 5880] IcmConnConnect: direct connect to www2.ABC.com:443
[Thr 5880] nihsl-getHostAddr: found hostname '.www2.ABC.com' in cache
[Thr 5880] nihsi-getHostAddr: hostname '.www2.ABC.com' = addr 16.256.48.91
[Thr 5880] nihsi-getServNo: servicename '443' = port 01.BB/0443
[Thr 5880] NiCreateHandle: state hdl 23 / socket -1 NI_INITIAL
[Thr 5880] NiIBlockMode: switch off block-mode for hdl 23 / socket -1
[Thr 5880] NiLowLevCon: connect to: host 16.256.48.91, port 01.BB/0443, fam 2 (low adr..high adr)
[Thr 4532] [Thr 4532] NiISelect: fds in write-mask: [Thr 5880] NiIInitSocket: set default settings for socket 65268
[Thr 5880] NiISocket: hdl 23 got socket 65268
[Thr 5880] NiPBlockMode: set socket 65268 to NONBLOCK mode
[Thr 4532]
[Thr 5880] NiPConnect: connect in progress
[Thr 5880] SiPeekPendConn: connection of socket 65268 established
[Thr 5880] NiLowLevCon: took local port 10.1B/4123
[Thr 5880] nilh-localCheck: using local address list
[Thr 5880] NiSetStat: state hdl 23 NI_CONNECTED
[Thr 5880] ->> SapSSLSessionInit(&sssl_hdl=015BC3DC, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 5880] <<- SapSSLSessionInit()==SAP_O_K
[Thr 5880] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 5880] out: sssl_hdl = 19193D20
[Thr 5880] ->> SapSSLSetNiHdl(sssl_hdl=19193D20, ni_hdl=23)
[Thr 5880] IcmPlCheckRetVal: Next status: WRITE_REQUEST(3)
[Thr 5880] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 5880] MPI<12ee>0#7 GetInbuf 5 1489e0 2179 (1) -> 6
[Thr 5880] NiPBlockMode: set socket 65268 to NONBLOCK mode
[Thr 5880] NiPSockGetStatus: socket 65268 ok, no data pending
[Thr 5880] NiPBlockMode: set socket 65268 to BLOCK mode
[Thr 5880] IcmReadFromPartner(id=0/4693): fe-nihdl timeout
[Thr 5880] PlugInHandleServData: role: 2, status: 3, content-length: 0/0
buf_len: 2127, buf_offset: 0, buf_status: 6
[Thr 5880] HttpParseRequestHeader: content length: 1805
[Thr 5880] HttpParseRequestHeader: no transfer-encoding set
[Thr 5880] HttpParseRequestHeader: Version: 1000
[Thr 5880] HttpParseRequestHeader: Keep-Alive: 0
[Thr 5880] IcmPlCheckRetVal: Next status: READ_RESPONSE(2)
[Thr 5880] IcmHandleNetWrite(id=0/4693): HandleServData returned: 2
[Thr 5880] BINDUMP of content denied
[Thr 5880] IcmWriteToConn(id=0/4693): prepared to write data to partner (len = 2127)
[Thr 5880] ->> SapSSLWrite(sssl_hdl=19193D20, buf=061F8A74, len=2127, timeout=2000, &writelen=123EFF24)
[Thr 5880] <<- SapSSLWrite(sssl_hdl=19193D20)==SAP_O_K
[Thr 5880] result = "written= 2127 of 2127 (all)"
[Thr 5880] IcmWriteToConn(id=0/4693): wrote data to partner (len = 2127)
[Thr 5880] MPI<12ee>0#8 FreeInbuf#1 0 1489e0 0 -> 0
[Thr 5880] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 5880] IcmReadFromConn(id=0/4693): request new MPI (0/0)
[Thr 5880] MPI<12ed>1#4 GetOutbuf -1 1489e0 65536 (0) -> 061F8A40 0
[Thr 5880] ->> SapSSLRead(sssl_hdl=19193D20, buf=061F8A74, maxlen=65483, timeout=500, &readlen=123EFEE8)
[Thr 5880] Fri Dec 02 08:59:10 2005
[Thr 5880] <<- SapSSLRead(sssl_hdl=19193D20)==SAP_O_K
[Thr 5880] result = "max=65483, received=8036"
[Thr 5880] IcmReadFromConn(id=0/4693): read 8036 bytes(timeout 500)
[Thr 5880] BINDUMP of content denied
[Thr 5880] PlugInHandleNetData: role: 2, status: 1, content-length: 0/-1
buf_len: 8036, buf_offset: 0, buf_status: 0
[Thr 5880] PlugInHandleNetData: read response header
[Thr 5880] HttpParseResponseHeader: no transfer-encoding set
[Thr 5880] HttpParseResponseHeader: Version: 1000
[Thr 5880] HttpParseResponseHeader: Keep-Alive: 0
[Thr 5880] PlugInHandleNetData: more data to read
[Thr 5880] PlugInHandleNetData: need more data (7936/12484)
[Thr 5880] IcmPlCheckRetVal: Next status: READ_RESPONSE(2)
[Thr 5880] IcmHandleNetRead(id=0/4693): read_len: 8036, HandleNetData returned: 2
[Thr 5880] IcmHandleNetRead(id=0/4693): status 2 -> 2
[Thr 5880] ->> SapSSLReadPending(sssl_hdl=19193D20, &pendlen=123EFF1C)
[Thr 5880] <<- SapSSLReadPending(sssl_hdl=19193D20)==SAP_O_K
[Thr 5880] out: pendlen = 0
[Thr 5880] IcmHandleNetRead(id=0/4693): pending SSL data: 0, rollout=1
[Thr 5880] nihsl-getHostAddr: found hostname 'localhost' in cache
[Thr 5880] nihsi-getHostAddr: hostname 'localhost' = addr 127.0.0.1
[Thr 5880] NiIDgSend: re-connect dgram to: host 127.0.0.1, port FD.E6/64998, fam 2 (low adr..high adr)
[Thr 5880] IcmConnRollOut: connection (id=0/4693) rolled out:
[Thr 5880] CONNECTION (id=0/4693):
used: 1, role: 2, stateful: 0
NI_HDL: 23, protocol: 2
host: www2.ABC.com:443
status: READ_RESPONSE
connect time: 02.12.2005 08:59:08
WP-status: ROLLED IN (Context: 0, Role: 2)
tid: 15, mode: 0, uid: 746, roll-reason: ICM_ROLL_NONE
MPI request: <12ee> MPI response: <12ed>
request_buf_size: 2127 response_buf_size: 65484
request_buf_used: 2127 response_buf_used: 8036
request_buf_offset: 0 response_buf_offset: 0
[Thr 4852] NiBufSelect: Postprocessing...
[Thr 4852] NiBufSelect: returning 1 clients
[Thr 4852] NiSelNext: returning hdl 5, r--, 00000000, rest 0 entries (0164FEF0)
[Thr 5880] IcmWorkerThread: Thread 6: Waiting for event
[Thr 4852] NiIPeek: peek successful for hdl -1 / socket 65588 (r)
[Thr 4852] NiIDgReceive - WAKEUP DGRAM received from:
host 127.0.0.1, port 07.B0/1968, fam 2 (low adr..high adr)
[Thr 4852] NiIPeek: peek for hdl -1 / socket 65588 timed out (r; 0)
[Thr 4852] IcmWatchDogThread: dg received
[Thr 4852] IcmWatchDogUpdateRollQueue(id=0/4693): insert fe-nihdl 23, flags=1
[Thr 4852] NiSelSet: hdl 23, r-, 01679D50
[Thr 4852] IcmWatchDogThread: check ni handles (timeout=10000)
[Thr 4852] NiBufSelect: Preprocessing...
[Thr 4852] NiISelect: timeout 10000 ms
[Thr 4852] NiISelect: maximum fd=65757
[Thr 4852] NiISelect: fds in read-mask: [Thr 4852]
[Thr 4852] NiISelect: fds in write-mask: [Thr 4852]
[Thr 4852] NiBufSelect: Postprocessing...
[Thr 4852] NiBufSelect: returning 1 clients
[Thr 4852] NiSelNext: returning hdl 23, r--, 01679D50, rest 0 entries (0164FF00)
[Thr 4852] IcmWatchDogThread(id=0/4693): nihdl 23 - data received(read)
[Thr 4852] NiSelClear: removed hdl 23 from selectset
[Thr 4852] IcmQueueAppend: Queuelen: 1
[Thr 4852] IcmCreateRequest: Appended request 8369
[Thr 4852] IcmConnRollIn: connection (id=0/4693) rolled back to status: READ_RESPONSE
[Thr 4852] IcmWatchDogThread: check ni handles (timeout=10000)
[Thr 4852] NiBufSelect: Preprocessing...
[Thr 4852] NiISelect: timeout 10000 ms
[Thr 4852] NiISelect: maximum fd=65757
[Thr 4852] NiISelect: fds in read-mask: [Thr 4152] IcmWorkerThread: worker 3 got the semaphore
[Thr 4152] REQUEST:
Type: READ_RESPONSE Index = 8368
[Thr 4152] CONNECTION (id=0/4693):
used: 1, role: 2, stateful: 0
NI_HDL: 23, protocol: 2
host: www2.ABC.com:443
status: READ_RESPONSE
connect time: 02.12.2005 08:59:08
WP-status: ROLLED IN (Context: 0, Role: 2)
tid: 15, mode: 0, uid: 746, roll-reason: ICM_ROLL_NONE
MPI request: <12ee> MPI response: <12ed>
request_buf_size: 2127 response_buf_size: 65484
request_buf_used: 2127 response_buf_used: 8036
request_buf_offset: 0 response_buf_offset: 0
[Thr 4152] ->> SapSSLRead(sssl_hdl=19193D20, buf=061FA9D8, maxlen=57447, timeout=500, &readlen=10BEFEE8)
[Thr 4852]
[Thr 4852] NiISelect: fds in write-mask: [Thr 4852]
[Thr 4152] <<- SapSSLRead(sssl_hdl=19193D20)==SAP_O_K
[Thr 4152] result = "max=57447, received=4548"
[Thr 4152] IcmReadFromConn(id=0/4693): read 12584 bytes(timeout 500)
[Thr 4152] BINDUMP of content denied
[Thr 4152] PlugInHandleNetData: role: 2, status: 2, content-length: 7936/12484
buf_len: 12584, buf_offset: 8036, buf_status: 0
[Thr 4152] PlugInHandleNetData: read response body (len=12484/12484)
[Thr 4152] PlugInHandleNetData: response completely read(EOS=0)
[Thr 4152] IcmFlushBuf: Flushing 12584 Bytes, buf_status: 6
[Thr 4152] flush buffer with mpi buffer id 1
[Thr 4152] MPI<12ed>1#5 FlushOutbuf l1 1 1 1489e0 12636 6 -> 061F8A20 0
[Thr 4152] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 4152] PlugInHandleNetData: close connection
[Thr 4152] IcmPlCheckRetVal: Plugin retval: PLUGIN_RET_CLOSE (-702)
[Thr 4152] IcmHandleNetRead(id=0/4693): read_len: 4548, HandleNetData returned: -702
[Thr 4152] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 4152] PlugInStopConn: role: 2, error: 0, write_err: 1
[Thr 4152] ->> SapSSLSessionDone(&sssl_hdl=015BC3DC)
[Thr 4152] <<- SapSSLSessionDone(sssl_hdl=19193D20)==SAP_O_K
[Thr 4152] NiICloseHandle: shutdown and close hdl 23 / socket 65268
[Thr 4152] IcmConnClose: Connection 0/4693 closed
[Thr 4152] IcmConnFreeContext: context 0 released
[Thr 4152] IcmServDecrRefCount: intersrv.afdb.local:443 - serv_ref_count: 1
[Thr 4152] IcmWorkerThread: Thread 3: Waiting for event
Cheers,
Siva MarananiSMICM with trave level3 is the only way(i know) to trace whether the message has left XI server or not.
-
How to trace an Inbound R3 IDoc by seeing application document
Hi all,
How to trace an Inbound IDoc number by seeing application document in R3.
sometimes 'Services from object' also we could'nt able to trace out the IDoc.
'Services from object' option sometimes appears in blank status with no IDoc.
Any possible tracing options?HI Chitra,
You can findout the Idoc number in R/3 System by using the tr.code WE05 or WE02.
Go throgh the following blog for message monitoring.
/people/alessandro.guarneri/blog/2006/02/14/super-message-monitor-for-sap-xi
Regards
Goli Sridhar -
How can multiple vis share input from a DAQ simutaneously
How can multiple vis share data input from a DAQ simutaneously?
Recently I am building a EMG measurement platform and somehow DAQ data need to be shared by several vis at the same time.
Are there any ideas?If you may need to add/delete tasks that will need th edata you may want to consider a publich/subscribe pattern. Basically your DAQ task will post a message to a single queue. The process listening on this queue (message broker) will determine if there are other processes registered to receive this message. When a device registers for a message it provides a queue to receive it on. The message broker will then post the message to all interested processes. The nice thing about this pattern is that you have dedicated code to handle broadcasting the message and it is very easy at run time to change the number of processes that get the message. The DAQ task will always send the message and will not care how many processes are listening.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot
Maybe you are looking for
-
A web service design issue with patterns
Hello, I�d like to ask for your help in the following design issue: I need to create an email sending web service (with Axis). Only just one method which returns with an integer return code. This handles the following: - based on the given parameters
-
Itunes crashes when I am in the store and try to look at an album
Itunes ver: 10.3.1.55 Windows XP SP3 Description of problem: When I launch ITunes store, it launches ok most of the time (works 100% if I don't launch any other applications at the same time). Then I will type something into the search bar. When th
-
Mac mini crashes after Softwareupdate
Hi I did a new installation with Mac OS X 10.6.3 DVD. After this I started the Softwareupdate and Downloaded all Updates (also the 10.6.6 Update). After the reboot Mac OS X does not start it crashes in the boot Process with the following error (see t
-
Can limit loop on FIELD-SYMBOLS list ?
i have loop .... LOOP AT <GT_TABLE> ASSIGNING <DYN_TABLE1> . i want to do LOOP AT <GT_TABLE> ASSIGNING <DYN_TABLE1> where but i get message that the 'LOOP .. WHERE' Have to be statically define
-
How to prepare a .zip(Build file)
Dear All, Please can anyone help me in writing a shell script which identifies all the .xml files with the same revision label and prepare a build file(.zip file) based on just those files. Star Team is a kind of vss.