How To Uninstall Final Cut Studio

Anyone know of a way to do this? I have no desire for it to be taking up the space it takes up when I barely, if at all use it anymore.
Anyone? Looked on Apple's Discussion Forums and found nothing of substance.
Thanks.
Not sure if it matters but the version of FCP it came with was 5. I want to remove the whole Studio though

This page tells you how to properly remove receipts and user preferences so upon reinstall the software update works correctly along with the rest of the program.
I am not looking to re-install.
I am leary of apps like AppZapper.
I was curious if maybe someone had a nice clean list like Adobe does here for CS 2: http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=331301

Similar Messages

  • Anyone know how to uninstall Final Cut Studio?

    I've attempted 3 installs and at the very end it says there were errors (of course, it doesn't say what errors), and to try again. Well, after 20+ hrs. into this I think it's time to start with a clean slate. But I can't find anything online on how to uninstall Final Cut Studio. I found several links to some mysterious document 93150, but apple's site doesn't have it anymore. Yeah, my luck.
    If anyone could help me on this, you're sure to get lots of good karma this weekend, maybe even into the week.
    thanks,
    -w

    Yeah, the Knowledge Base documents to uninstall FCP 4 or higher no longer exist. (only the doc for FCP 3 exists) That being said, the Troubleshooting Basics for Final Cut Pro 5 document does detail how to trash receipts and reinstall. Haven't needed to try it myself (knocking on wood) but I take it you've have and it still hasn't worked out for you?
    What, exactly, is prompting all of these installs?

  • How do I uninstall Final Cut Studio?

    I recently upgraded to a Mac Pro and need to uninstall Final Cut Studio from my 17" powerbook G4. Does any one have a good method for this? Is there an uninstaller? If not can you provide a list of the files and their locations so I can delete them?
    Thanks!
    Mac Pro Dual 2GHz   Mac OS X (10.4.10)   Final Cut Studio

    http://discussions.apple.com/thread.jspa?threadID=1030504&tstart=0
    Hope that helps !
      Alberto

  • Trying to uninstall Final Cut Studio - files reappearing?

    I am trying to uninstall Final Cut Studio, I have tried using FCS Remover and I have tried manually deleting the files (and emptying the trash) but after a restart the files are all reappearing? How in the world is this happening?

    what type of files?

  • How to uninstall final cut pro 5

    How do you do this? I have used app delete to erase the files but it didn't get them all. I know this because when I check for updates it still offers me the final cut pro updates. I have searched around but cant find an uninstaller. Help please.
    Thanks,
    Macguy3000

    Warning - This is a long post.
    How to uninstall Final Cut Pro & the other ProApps -
    There are two ways to do this. The first requires that you insert the
    install discs for each app and go through the following procedure to
    identify the installed files.
    1) Insert the disc and double click the install icon.
    2) Click to let the installer check your system
    3) After the installer opens, click File > Show Files (Command-T)
    4) Click the disclosure triangle next the the app's name to show all the
    files installed, then select all of them
    5) Choose Edit > Copy (Command-C)
    6) Open a text editor & paste the list
    7) If you have a printer connected, print
    8) Make sure you delete the file/folder in the exact location indicated
    in the list
    9) Insert the next app's install disc and repeat
    The other way involves the Terminal.
    Using Terminal:
    1) In Finder, choose Go > Go to Folder (Shift-Command-G)
    2) Enter the location /Library/Receipts/FinalCurPro.pkg/Contents
    3) Click Go to open the Contents folder
    4) Launch Terminal (/Applications/Utilities/Terminal)
    5) Enter the command lsbom -s (a lower case L, not an upper case i)
    lsbom lists each of the files inside the bill of materials. To list only
    the folders, the command would be lsbom -d.
    6) Type a space, then drag the Archive.bom file from the Finder window
    to the Terminal window.
    7) Press Return to view the list
    8) Drag to select the list in the Terminal window and choose File > Copy
    (Command-C)
    9) Open a text editor and paste the list into it. Print if you have a
    printer attached.
    10) Guided by the list, delete all the files and folders, being
    extremely careful to delete from the exact locations shown in the list.
    NOTE: The above comes from the Peachpit book Optimizing Your Final Cut
    Pro System.

  • Uninstall Final Cut Studio 2 completly

    I wanted to know if there´s a programm for uninstalling final cut studio 2 completly with its components, because I need more workspace for the new final cut studio 3?
    Maybe someone nows a programm as well for the creative suite CS4?
    Thanks

    [FCS Remover|http://www.digitalrebellion.com/fcs_remover.htm]
    Doesn't the Adobe CS4 come with an uninstall option? My Photoshop CS3 did.

  • I want to uninstall Final Cut Studio. Or some of its apps. How?

    I want to uninstall some of Final Cut Studio's apps to make room on my MacBook Pro's hard drive. I just came back to Mac from PC, so I'm a little out of practice on Macs. Can someone help me? Thanks.

    AppZapper
    It comes with 5 free zaps before you have to purchase, but the price is good.
    tim

  • Uninstalling Final Cut Studio

    I would like to find out how to perform a complete uninstall of Final Cut Studio. Do instructions exist for this task?

    this was a pain in the neck, but after 5-6 hours researching the following worked for me:
    Shane adair's advise as below ( from thread upstream) and
    http://docs.info.apple.com/article.html?artnum=301182
    shane thanks!
    How to uninstall FCP 5
    Here's the way to do it:
    1) Close FCP
    2) Go to: /users/username/library/preferences/
    a. Delete the com.apple.FinalCutPro.plist
    b. Delete the FCP User data folder.
    3) Go to: Applications
    a. Delete FCP application
    b. Delete FCP HD addition easy setups folder.
    4) Go to: /library/applicaton support/fcp system support/
    a. Delete Custom Settings folder
    b. Delete Plugins folder
    5) Go to: /library/receipts/ and delete the following:
    a. AnalogPAL.pkg
    b. AppleIntermediateCodec.pkg
    c. DigitalPAL.pkg
    d. DVCproHDCodec.pkg
    e. FinalCutPro.pkg
    f. FinalCutproHDUpdate4.5.pkg
    g. FinalCutProHelp.pkg
    h. HDVCodec.pkg
    i. IMXCodec.pkg
    j. Uncompressed422.pkg
    k. VideoOutSupport.pkg

  • Advice How to Ugrade Final Cut Studio 5.04 5.1?

    Has anyone written anything on how to update my FCS Final Cut Studio 5.0.4 to 5.1?
    I received my 5.1 replacement disks today (and not looking forware to the chore).
    Do I uninstall (trash what folders?) and run the 5.1 disks?
    Any tips will be greatly appreciated...

    Finally got around to running 5.1 crossgrade (with my 5.0x still in place) -- appears seamless -- I just started the #1 install disk and followed all the instructions -- it didn't even ask for the serial...

  • General Overview on How to use Final Cut Studio to create a Blu-Ray DVD

    I am a new user of Final Cut Studio and need an experienced user to give my a progression guide on how to create a Blu-Ray DVD of my recent Alaska Trip. Last month I spend 8 days in Alaska visiting Denali and Juneau primarily. During that time I took about 100 short video clips (HD 1080p) and 570+ still photos with my Canon 7D. I have experimented with some pieces of the software and have created a Blu-Ray disk using Final Cut Pro and Compressor. However my goal is to create this DVD with menus that will play short clips (some narrated) and still photos(also some narration). I did a short one in DVD Studio Pro this morning but need some general guidance on what progression and programs to use to create this project. I was not able to take my video from the Studio Pro Sequence I created for my 1st DVD I had to take the original clips which were processed using Apple ProRes 422 and copy them in one at a time and then find the audio (on the voice overs) I created and also place them into DVD Studio Pro one at a time. I obviously need some guidance on the proper progression.
    Any help would be greatly appreciated.

    Here's the situation...
    DVD Studio Pro will not do the trick for you - it doesn't do blu-ray discs. If you want to do Blu-ray you've got to use either Final Cut Pro's "Export" command or Compressor's "Burn Blu-ray disc" template. The downside to both of these approaches is that you can't burn more than one title (or movie, etc.) using Final Cut Studio.
    To do what you want to do, you need Toast (at least). Toast will auto-generate menus but will let you put more than one title per slide (so you can put multiple slideshows on the same disc).
    If you want to do full-on customizing of menus and multi-level menus, for that you need Adobe's Encore.
    My suggestion - Get Toast. Encore is close to $800.
    Here's your progression (at least the one I use).
    Edit in Final Cut Pro (ProRes 422 is fine, ProRes 422 LT would do the trick as well)
    Export as QuickTime movies (original settings)
    In Compressor using the H.264 for Blu-ray setting and Dolby Digital setting and create elementary streams for video (.264 file) and audio (.ac3). Make sure these files have identical names except for the extension.
    Using toast, add the video file to the Toast project and it'll find the audio file.
    Burn away!

  • How to get final cut studio 2 install disk to work on macbook air OS 10.8.4

    I just purchased a Macbook Air OSX Mountain Lion 10.8.4 and trying to install Final Cut Studio 2, however the install disk wont open using a superdrive.  How can I get my software loaded?
    Thank you.

    Try this forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io
    Al

  • How can Install Final Cut Studio in my Mac Pro Early 2009 ??

    I have Final Cut Studio 7  NOT installed yet and Mac Pro Early 2009 with  OSX  10.9.5. I have Final Cut Pro X  Version  10.1.4 installed. Can I installed Final Cut Studio here together with  FCPX ?? Maybe not. What is the best way to install FCP Studio??
    Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ??   10.6,  10.7,  10.8, 10.9  ??
    Thanks for any help I can get
    Alberto Marban

    Here is the Best Practice Guidelines from Apple:
    Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
    MtD

  • How long does final cut studio crossgrade mail take?

    Hey there, forgive me if this is the wrong place to ask this.
    I sent in my final cut studio discs with filled out form in about 4 days ago regular mail.
    I scanned the discs before i sent them off and of course I still have my paperwork (serials) and all that.
    What bothers me is that I check the status and there is no record of it.
    there is also a field that is required for "company" and I dont have a company name so I have no idea if this is screwing up the whole look up.
    Anyway, its probably that they havent recieved my discs yet, since 4 days isnt very long.
    BUT, can anyone clue me in on how long it took to get their universal versions nial cut studio?

    It took mine almost 2 weeks. It took almost a week for mine to show up on the status and when it did, it said backordered. Stayed that way for 4 or 5 days, then got an e-mail saying they had been shipped. Got them this past Saturday.
    Company name doesn't matter. I didn't fill in one on the original form and didn't when used the status form.
    Sharon

  • How can I Final cut studio 5.1 running on osx lion

    I have a old version (Final Cut Studio 5.1) and I would like to use with OSX lion. How can I make that run, don´t want to downgrade!!!!!

    I want a brand new Jaguar and a 4000 acre ranch in Wyoming.  But just like in your case, it ain't gonna happen.
    You'll either need to upgrade the software or downgrade the OS.
    -DH
    ps: for future reference, the Final Cut Studio forum is located here: https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
    This is the FCP-X forum.

  • Uninstall Final Cut Studio Pro 2 (buggy)

    Really Frustrated with FCPS2, can any tell me how to remove Studio from my system. I need to go back to 5, but need to clean out the buggy Final Cut Pro Studio 2

    You can do a "clean" install of your OS, or you can:
    http://proapptips.com/tips/article.php?story=20060927223215377&query=reinstall
    the clean install is the most hotly debated topic right now, other than the utility of "Content Creation with Final Cut Studio" forum. you decide. good luck.

Maybe you are looking for

  • Need to remove old email account

    An old gmail account shows up on my Torch 9800 in Setup-->Email Accounts as an Enterprise Account. It also appears as an Enterprise Activation icon on my Torch screen. Finally, it appears on Contacts-->Select Contact List. This gmail account was once

  • Problems after restore

    Yesterday I restored my iPad and reinstalled iWork for iPad. Now my dockkeyboard Apple and my wireless keyboard Apple do not work. My keyboards work well with others apps. Could you help me ?

  • Transporting RRI Assignment Details

    Hi , the following is the method i use to transport RRIs a) Rsbbs b) Select Sender query ,press enter c) Select reansport manually from the environment tab 4) Change package and attach it to a request In the destination system i'm able to find the ju

  • DO NOT UPDATE TO LATEST EFI - READ THIS!!!

    Hello, Do NOT attempt to insstall latests EFI update. It breaks Macbook Air stability. I just run tests and are 100% sure. My macbook after update is getting this messages in kernel: WaitForStamp: Overflowed waiting for stamp 0x6 on Media ring: calle

  • Ipad mini restore from iphone backup

    I cannot restore my iphone back up to my new ipad mini. I see the iphone back of 3.7GB on my computer, however the restore from iphone backup is not updating anythign on my ipad. any clues?