How to use dynamic id of text box document.getElementById in JQuery

Dear Sir,
I am having code in ajax
I am bringing id from ajax
code is for text box id='textbox1"+i+"'
here id name I am giving textbox and i is my increamented value and appending with textbox
the id is dynamically generating it is like textbox0 on next textbox2
But
how I ll use the same dynamically generated id in on of my jquery function using document.getElementbyid
I am not good in jquery.
please help
regards sanat

That is a JQuery question, i.e. a JavaScript question, and this is a Java forum. Locking.

Similar Messages

How to use dynamic list box in survey builder?

Hello,
Could someone give me a little bit of thread? How to use dynamic list box in survey builder?

Hi Liu,
Dynamic combo boxes::A combo box is dynamic if it references a document property for which a value set is defined in the configuration (System Administration ® System Configuration ® Content Management ® Global Services ® Property Metadata ® Properties ® Parameter Allowed Values).
At runtime (when you open the creation form) the system reads these values from the configuration and displays them in the dropdown list.
If you link a combo box for which list entries already exist to a document property with a value set, the system asks whether you want to delete the list entries. it is recommend that you accept this suggestion and delete the list entries from the XML Forms Builder. Otherwise inconsistencies could arise between the entries in the XML Forms Builder and the value set in the configuration. This can cause errors when saving.
Also you may Refer the Link for Further help:
http://help.sap.com/saphelp_crm50/helpdata/en/29/c40d3d2a83752de10000000a114084/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/00/9e7f41969e1809e10000000a155106/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/a7/5a874174a8050de10000000a1550b0/frameset.htm
Hope it Answers your Queries..
Thanks and Regards,
RK.

How to increase the size of text boxes in FCPX without stretching the text inside?

How to increase the size of text boxes in FCPX without stretching the text inside?

There are two basic Title formats — I should say Layouts — available: Text (plain) and Paragraph. (The plain text version usually does not appear with the blue dot controls — those generally appear for the paragraph type control.)
If the Title is using a Paragraph layout, it's like having a mini version of Text Edit available inside FCPX. You can tell when you click on the text (when the title is selected) -- a rectangle will appear around the text like so:
double clicking on the text will give you the bounds controls which you can use to redefine the text area without distorting the text. Once selected, notice the button that appears in the top right corner of the canvas:
Pressing that will activate the ruler. You can right click on the ruler and add Tab Stops (left, right, center and decimal.)
So if the title uses paragraph formatting, you can create a very WYSIWYG type of display text (use the Text inspector to alter text selections within the paragraph bounds.)

SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,

Hi，
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to include unicode chars in text boxes?

Hi,
We need the unicode chars (for example: Chinese, Korean, etc...) to appear in the generated .pdf and .pcl files from the Adobe Output designer's IFD file.
These chars are static and will not change, so we shall not be fetching them from FNF file (.dat).
While trying to copy-paste directly into text box field, we are getting an error prompting for converting them to some other character set.
We couldn't paste them exactly with the text how they should appear in the text boxes.
Please tell us if there is a way to achieve this.
Thanks and regards,
Gurunath
[email protected]

Double check that all of the selected presentation targets and the font being used for the particular text box supports the characters you are trying to paste into it. For example, the PDF target only has 11 fonts available unless you use the other tabs to "create new soft font cartidges". If you have the appropriate fonts installed on you PC you should be able to use this capability to make the font available for each of your presentation targets. (At least that is my impression - I've never needed to try it.)

Problems with displaying Asian languages dynamically in a text box

I have a text box that I am adding to the stage dynamically. The text box is a movieclip in the library. However, when it is added to the stage the message is not displayed. I have no problems with English or Spanish but for Chinese, Korean, and Japenese the message is not displayed. Here is the code in Chinese (when a certain condition is met:
function whiteFlashCompleteF():void{
   ssMessageF("截图已添加至您的图片库");
function ssMessageF(s:String):void{
    ssMessage.alpha = 0;
    addChild(ssMessage);
    ssMessage.x=stage.stageWidth/2;
    ssMessage.y=stage.stageHeight/2;
    ssMessage.tf.text = s;
    TweenLite.to(ssMessage,1,{alpha:1});
    TweenLite.to(ssMessage,1,{alpha:0, onComplete:ssMessageCompleteF, delay:3, overwrite:false});
Do anyone have any ideas on how I can get the text to display?

any text that is rendered in a dynamic textbox during runtime,
has to consist of characters of a font you have properly embeded,
(which might not be the case for this chinese message)

How to count the number of text boxes that are data entered

How to count the number of text boxes that are data entered in visual basic form.

Here is an Iterator that expands on my previous response:
''' <summary>
''' Iterator for form controls
''' </summary>
''' <param name="onlyControlsOfType">specify type if a certain type of controls needed</param>
''' <param name="onlyTopLevel">if true don't search containers within the form</param>
''' <returns></returns>
''' <remarks></remarks>
Private Iterator Function AllControls(Optional onlyControlsOfType As Type = Nothing, _
Optional onlyTopLevel As Boolean = False) As IEnumerable(Of Control)
Dim ctrl As Control = Me.GetNextControl(Me, True)
Do Until ctrl Is Nothing
If onlyControlsOfType Is Nothing OrElse ctrl.GetType = onlyControlsOfType Then
If TypeOf ctrl.Parent Is Form OrElse Not onlyTopLevel Then
Yield ctrl
End If
End If
ctrl = Me.GetNextControl(ctrl, True)
Loop
End Function
Some sample uses:
For Each
For Each c As Control In AllControls()
Debug.WriteLine(c.Name)
Next
List of all controls, including controls in containers i.e. Groupbox
Dim l As List(Of Control) = AllControls().ToList
List of all Textbox controls, including Textboxes in containers i.e. Groupbox
l = AllControls(GetType(TextBox)).ToList
List of all Textbox controls, don't include Textboxes in containers i.e. Groupbox
l = AllControls(GetType(TextBox), True).ToList
'Those who use Application.DoEvents() have no idea what it does and those who know what it does never use it.' JohnWein
Multics
My Serial Port Answer

How to Use Dynamic SQL

Can anybody please send me a small program on How to Use Dynamic SQL.
How to execute and run give details.
Thanks
null

You can certainly use the INTO (and USING) clauses of EXECUTE IMMEDIATE to pass in and return data, i.e.
EXECUTE IMMEDIATE sqlStmt
USING variable1, variable2
INTO output1, output2The more complex the statement, however, the more appropriate DBMS_SQL is. DBMS_SQL also has the potential to allow you to use bind variables rather than reparsing the statement many times.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

In Pages, How to duplicate a design (multiple text boxes

In Pages, How to duplicate a design (multiple text boxes & graphics) which is on the top half of the page, onto the bottom half? I appreciate anybody's suggestion!
Alan

Hi alanhome,
Not trying to be cheeky, but a copy and paste doesn't work?
Cheers,
GB

How to use dynamic select query which queries from 3 different table.

Hi All,
I am new to Toplink, i would like to use a named query to select some of the columns from 3 different tables with dynamic where clause.
I have used the following lines. Please tell me how to get code for the dynamic where clause.
First try :
Vector objPersons = (Vector)session.executeQuery("findPersonByGlobalID",Person.class,vQueryArguments);
The above method is not returning the vector or collection.
Second Try:
ReadAllQuery query = new ReadAllQuery(Person.class);
query.useCollectionClass(LinkedList.class);
LinkedList person = (LinkedList) session.executeQuery(query);
The second try is returning the collection but, this fetches all the record from the table.
1. How to query for range of records?
2. How to query from multiple tables for some range. How to use dynamic range values ?
Please reply with your answers or some pointers would help.
Thanks and Regards,
Vijay.B

Hi,
Did you try using a SQLCall ? It might be able to satisfy you requirements .. :-
Employee employee = (Employee) session.executeSelectingCall(
new SQLCall("SELECT * FROM EMPLOYEE WHERE EMP_ID = 44")
);You can get more information here :-
http://www.oracle.com/technology/products/ias/toplink/doc/1013/MAIN/_html/qrybas004.htm
Regards,
Sandeep

How to use dynamically column_name and column_name value in plsql procedure

hi,
how to use dynamically column_name and column_name value in plsql procedure.
for example, i have one table with column col1.i want write plsql code with dynamically execute the insert one schema to another schema.
by
siva

DECLARE
CURSOR C
IS
SELECT cc_cd
FROM TEMP1 WHERE s_flg ='A' AND b_num IN('826114');--,'709537','715484');
CURSOR D
IS
SELECT * FROM cONSTRAINTS_test ORDER BY SRL_NUM;
STMT VARCHAR2(4000);
p_target_schema VARCHAR2(30):='schema1';
p_source_schema VARCHAR2(30):='schema2';
BEGIN
FOR REC IN C
LOOP
FOR REC1 IN D
LOOP
STMT := 'INSERT INTO '||p_target_schema||''||'.'||''||REC1.CHILD_TABLE||' SELECT * FROM '||p_source_schema||''||'.'||''||REC1.CHILD_TABLE||' where '||REC1.COLUMN_NAME||'='||REC.cntrct_cd||'';
Dbms_Output.Put_Line('THE VALUE STMT:'||STMT);
END LOOP;
END LOOP;
END;
cc_cd='434se22442ss3433';
cc_t_ms is parent table-----------------------pk_cc_cd is primary key
cc_cd is column name
CONSTRAINTS_test table
CHILD_TABLE NOT NULL VARCHAR2(30)
CONSTRAINT_NAME NOT NULL VARCHAR2(30)
COLUMN_NAME NOT NULL VARCHAR2(400)
R_CONSTRAINT_NAME VARCHAR2(30)
CONSTRAINT_TYPE VARCHAR2(1)
PARENT_TABLE NOT NULL VARCHAR2(30)
SRL_NUM NUMBER(4)
CHILD_TABLE     CONSTRAINT_NAME     COLUMN_NAME     R_CONSTRAINT_NAME     CONSTRAINT_TYPE     PARENT_TABLE     SRL_NUM
a aaa cc_CD     pk_cc_CD     R     cc_t_MS     1
bb     bbb      Cc_CD     PK_CC_CD     R     cc_t_MS     2
bb_v     bb_vsr     S_NUM     PK_S_NUM      R     bb_v      3
cC_HS_MS     cc_hs_CD     cc_CD     PK_CC_CD     R     cc_t_MS     4
cC_HS_LNK cc_HIS_LNK_CD     H_CD     PK_HS_HCD     R     cC_hs_ms 5
cC_D_EMP     cc_d_EMP     Cc_CD     PK_CC_CD      R     cc_t_MS     6
i want insert schema1 to schema2 with run time of column_name and column value.the column_name and values should dynamically generated
with refential integrity.is it possible?
can any please quick solution.its urgent
by
siva

How to use dynamic parameter when a report is created using Stored Procedures

Hi all,
any one have the idea of how to use dynamic parameter in crystal report XI R2
when report is created using Stored Procedure.
Regards
shashi kant chauhan

Hi
You can create an SQL command in Database Expert > Expand your datasource > Add command
Then enter the SQL query that will create the list of values to supply to the user
eg select field1,field2 from table
Then edit the parameter of the report. These will be the SP parameters adn can be seen in field explorer.
Change the parameter type to Dynamic
Under the word Value click on Click here to add item
Scroll down to your Command and select one of the values that you want to appear in the list
e.g field1
Then click on the Parameters field - this is essential to create the param
You can edit other options as required
That should do it for you.
I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
Best of luck

How do you create aligned interactive text boxs in a PDF with the same width and height?

how do you create aligned interactive text boxs in a PDF with the same width and height?
Without free hand creating the sizing?

Assuming by "interactive text boxes" you mean form fields; in Acrobat, make a form field, then copy it and paste. (GIve the pasted copy a different name so they don't genetate the same field feedback.) Now you have two fields of the exact same size. Shift-click or marquee-drag to select both, then right-click and choose a command from the Align, Distribute or Center menu.

ADF 11g + How to capture the value of a dynamically created input text box

Hi All,
I have a requirement where, on selection of the value in a drop down, the input text boxes need to get dynamically populated on the JSPX page. I'm able to bring this functionality, and it is working fine.
But the challenge right now I'm facing is that, how to read/capture the value entered in those dynamic text boxes on submission of the page. Please help me in getting this resolved.
Below is the code snippet I'm using for this.
// Clearing the existing input fields in the Panel form
while (pf100.getChildren().iterator().hasNext()) {
pf100.getChildren().remove(pf100.getChildren().iterator().next());
// Creating the new fields based on the number of IP addresses selected
for (int i = 0; i < iIPAddress; i++) {
RichInputText pcPreferredDomain = new RichInputText();
pcPreferredDomain.setLabel("Preferred Domain / Hostname for Desktop PC/ Laptop - " +
(i + 1));
pcPreferredDomain.setColumns(40);
pcPreferredDomain.setId("pcpfdomain" + (i + 1));
pf100.getChildren().add(pcPreferredDomain);
Thanks All in Advance,
Thanks & Regards,
Dharmathej M

As per your method, you are creating the RichInputText components as local variables.
What happens when you are creating them as class level variables in the managed bean, if you do so, you can refer to the values of the UI components in the actionListener/action code for the command button in the managed bean
sample:
public class ManagedBean{
RichInputText [] pcPreferredDomain;
public ManagedBean(){
// Clearing the existing input fields in the Panel form
while (pf100.getChildren().iterator().hasNext()) {
pf100.getChildren().remove(pf100.getChildren().iterator().next());
pcPreferredDomain = new RichInputText[iIPAddress];
// Creating the new fields based on the number of IP addresses selected
for (int i = 0; i < iIPAddress; i++) {
pcPreferredDomain[i] = new RichInputText();
pcPreferredDomain.setLabel("Preferred Domain / Hostname for Desktop PC/ Laptop - " +
(i + 1));
pcPreferredDomain.setColumns(40);
pcPreferredDomain.setId("pcpfdomain" + (i + 1));
pf100.getChildren().add(pcPreferredDomain);
Thanks,
Navaneeth

Dynamic action on text box change does not working

i have a page with following components.
a report that has and edit link.
a text box to catch the primary key from report link when it is clicked
a number of elements (text boxes, check boxes and LOVs) which are used as data entry form.
Now my design is that user enter values save them and no sooner did they save, the report depicts new
values. if user want to edit any record, they click on edit link and the data entry form elements
should now bring all those values from DB on page. i m successful to pick primary key and bring
it in a hidden text box and wrote a dynamic action on its change event that will bring values from
DB and set all page elements. but but but.........the change event doesnt work. it only work
when focus is lost from the text box...!! offcourse user wont want to click in that "hiddent" text
box and then click some where else to bring values in page data entry form......
help is humbly requested from forum or if any other solution approach is to be used easier than
one i m using, would be appreciated.
thanks in advance for reading my bore question :)

bundles of thanks for reply. i m going to elaborate.
1. My page no is 3.
2. Hidden Item name is P3_EDIT_ACTIVITY_ID
3. Data entry form, hidden item and the report are on the same page.
4. on the edit link of report, i have used following settings.
    Target: Page in this application
     Page: 3
     and i set hidden item as follows......
     Item 1   P3_EDIT_ACTIVITY_ID         Value #ACTIVITY_ID#
   well, when i click the link on report it does bring Activity_Id in the hidden box (which is not yet hidden for debugging purpose)
Next i wrote Dynamic action which fires on the change event of P3_EDIT_ACTIVITY_ID and run PL/SQL code with in it which is as follows
declare
Dept varchar(50);
begin
   select my_dept into Dept from activity_main ACTIVITY_ID = :P3_EDIT_ACTIVITY_ID;
   :P3_Dept := :Dept;          (i did use :P3_Dept := Dept also but this wont work)
insert into testdynamic (stamp) values (Dept); (I did this to check whether correct value is brought from DB, yes it works correctly, correct Dept is being inserted in stamp column)
end;
i have created another true action to check when the dynamic action is fired. its very simple alert. and the problem is, it only fires when focus is lost from the P3_EDIT_ACTIVITY_ID. i mean, when u keep changing value inside the text box, nothing happens, when u go outside, the alert is fired and so the pl/sql procedure. but the line
    :P3_Dept := :Dept;       OR      :P3_Dept := Dept;         arent working which is the actual requirement.
I m not using set value here as i have to set a lot of values on page not one. further. plz let me get rid of this lost focus thing as i want the form to be populated with correct values related to P3_EDIT_ACTIVITY_ID as the user click on any edit_link in the report.
Thanks for persistence. i hope i have provided all the details.
looking forward.

How to use dynamic id of text box document.getElementById in JQuery

Similar Messages

Maybe you are looking for