How to use Keyfigures in the Bex variable selection screen.

Hi,
I have a scenario, where the user whats to see the keyfigures like volume, amount in the variable selection screen, so that he can dynamically, set the condition according to his requirement.
For example , he wants to see all the PO's for a particular calmonth which have volume > 1 Million or on someother day, he may input the value as volume > 2Million or Volume < 0 , so it depends. Similarly he wants to dynamically select the Amount values.
I have tried using condition with "greater than"and value as a formula variable and it works for one condition, but if I add another condition i.e, "less than"and value as a formula variable then it conflicts and the query is throughing below error.
"ERROR BRAIN (418): Variable ZCS_VAR_CH_KG_LT (DC015DZ850NUYVFDMPJHRGHXW) does not exist or is incorrectly used 4 Volume"."".
Do we have a option to use customer exit in such a scenario ??, any suggestions please.

Hi,
Please check out the below link.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60b33a28-dca2-2d10-f3b2-d2096b460b1e&overridelayout=true
Hope it suffice your requirement.
Regards,
AL

Similar Messages

How to not display unnecessary attributes in variable selection screen?

Hello everybody,
I created a input variable referenced Calendar Year/Month(0CALMONTH) in my query. But as I select values for my variable when I execute the query, all the display attribute of 0CALMONTH displayed in the select screen, just like Calendar Year/Month Text, Calendar Year Key, Calendar month key, Number of Days Key, Number of Workdays Key...But I think just display Calendar Year/Month Text in the select screen is enough, how do I just display necessary attributes in the variable selection screen, not all the display attributes of 0CALMONTH?
Tks!

Hi........
Check this link :
http://help.sap.com/saphelp_nw70/helpdata/EN/ac/789b3c4d4d8d15e10000000a114084/content.htm
If this helps you kindly assign some points.........
Regards,
Debjani.......

Bex variable selection screen issue

Dear All,
I have three variables in my Bex report -- Submission date, User ID and Company Code. The variable -- 'Submission date' is of type 'Replacement Path'. Other two are User entry.
When I run the report, only the 'User ID' and 'Company code' variables are displayed. After I supply the values to these, 'Submision date' screen pops up. But I require that all the three variables on a single scren at a time.
Thanks,
Srinivas

Hi.....
O.k. I agree with you. But when I execute the report in Web(or in Portal), then in that case all the variables are displayed in the same screen. How is this possible ?
Thanks,
Srinivas

What's the sense of "NOT" in the BEx-Analyzer selection-screen?

Hi specialists,
the selection-screen Queries in the BEx-Anlyzer presents the following selection-options:
"="
"<="
">"
">="
"<"
as well as their inverses:
"not"
"not ="
"not <="
"not >"
"not >="
"not <"
"not []"
"not *"
While most of this options are redundant (because "not <=" is the same as ">") I absolutely cannot find any case where the above maked "not" makes any sense.
In other words: Could somebody please gimme a hint what's the difference between "not" and "not =".

Hi Stefan,
I'm not sure weather we are talking about the same thing.
When I use the the "more"-button (multselection-screen) of the selelection-screen, then I can comprehend your eplaination: The tab's are "and" connected - while the rows within a tab are "or" connected.
But without the multiselection-dialog, there's still the option "not" in the drop-down list left to the value-field on the selection-screen. But I can't see any possibilty to filter the same variable multiple times here. So the example you mentioned doesn't fit here.
Perhaps in some different way:
If I choose "NOT" for the salesorg-variable, without providing a value followed by [enter]/check, then the "not" option is changed to "".
If I choose "NOT" for the salesorg-variable, providing a value followed by [enter]/check, then the "not" option is changed to "=".
In which case does the "not"-option "survive" the check without beeing corrected to any other option?
(btw: I miss a possibilty for attaching images in the sdn-forum! - That would make some explainations much easier)

How to use a charctersic as a keyfigure in the BEx report

How to use a charctersic as a keyfigure in the BEx report?

Hi chandra:
Please take a look at the document below.
"How to... Calculate with Attributes"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc?quicklink=index&overridelayout=true
Regards,
Francisco Milán.

Need to skip the variable selection screen when using dropdown

Hello Friends,
I have created a web template having a dropdown, a table and a text element. Basically I am trying to follow the guide "How to Use a Dropdown Box to Set Variable Values". It shows how to select values for a variable using dropdown.
NOTE: The guide can be found here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2642ab90-0201-0010-9193-d59de66cbab4
What is happening is when I select a value for the variable in the dropdown, the correct url is getting formed but instead of displaying the report using the selected value, the variable selection screen appears. Given below is the url that gets formed:
http://abcdev.wdf.sap-ag.de:8000/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=3&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT&VAR_NAME_1=TSTPEROD&VAR_VALUE_EXT_1=04.2007
Please assist me to get rid of the variable selection screen. Thanks!
Regards,
Prem.

Hello Ray,
Thanks for your reply. This has partially resovled the issue. I have awarded you points for that. Now I am able to skip the variable screen.
However, the query results are not getting refreshed. I wanted to restirct the values based on the value given in the variable selection (In my case the dropdown box). Somehow I am not able to link the dropdown with the variable or the "SAPBWOpenURL(url);" function is having some issues.
Please assist. Thanks!
Regards,
Prem.

How to add customize message on the variable selection screen in the query

Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
Rani

Hi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it.

How to use report designer in bex analyser ,quary designer, wad give scree

how to use report designer in bex analyser ,quary designer, wad give screeeenshots detail

Hi,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
WAD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/71563c3f65b318e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a9/71563c3f65b318e10000000a114084/frameset.htm
/people/prakash.darji/blog/2006/07/16/bim253-at-teched--query-report-and-web-application-design-with-the-sap-business-explorer-suite
http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
GTR

How to restrict keyfigures in my bex query which is built of infosets?

Hi all,
How to restrict keyfigures in the query which is built of infosets?
the query display likes
cost     taxamount        units
1000     100                     10
i want my report to be displayed like this
cost      taxamount          units
100       10                      1.
I have used conditions by restricting using units. like
units equal to 1. but still it display like the above one.
can anyone help me on this??
thanxs
haritha

Hi Haritha,
Do u want to display units 10 as 1?????
If this is the requirement then u can write a new formula by using IF condition.
Khaja

Where are the BEx variable stored

Hi All,
I have couple of doubts. I would appreciate, if some one can through some light on these.
1. Where does all the BEx variables stored, if they are stored in BW, then in which transparent tables these are stored.
2. Where does the properties of the BEx InfoObject in the BEX Query are stored, if they are stored in BW, then in which transparent tables these are stored.
Thanks in advance,
CK

Hi Sudheer,
Are you ready for have some fun?!?
With BW Analyzer loaded and one of your BW workbooks open in Excel do the following:
First, launch the Visual Basic Editor. You do this either on the Excel Menu Bar (Tools >> Macro >> Visual Basic Editor); or, by pressing Alt + F11.
Be sure that the Project Explorer Window is visible. If not, on the VB Editor toolbar select View >> Project Explorer; or, press Ctrl + R.
Projects are listed alphabetically. Probably the first object you see in the Project list is SAPBEX(sapbex.xla). This is the BW Analyzer. You can't open it, but you can explore it using the VB Editor Object Browser. More about that later.
For now, locate your workbook. It will probably be named VBAProject(name of workbook.xls). If there is a "+" to the left of the project name, click on the + to expand it.
You will see at least two types of objects:
+ Microsoft Excel Objects
+ Modules
Expand them both.
Among the Microsoft Excel Objects, you will see worksheets, maybe charts, and the object for the workbook itself (ThisWorkbook).
Each sheet has two names. The first is the codename. The second is the name you see on the tabs when you are in Excel.
Notice that there are two more worksheets here than you see in Excel. One of these has a "tab name" of SAPBEXqueries; the other is named SAPBEXfilters.
There is nothing you can do in Excel to make these sheets visible. They are not ordinary hidden worksheets.
There are two ways you can make them visible:
1. using the Properties Window
2. using Visual Basic code
If the Properties Window is not visible, on the VB Editor toolbar select View >> Properties Window; or, press F4. Double-click on the worksheet object to select it. Then, change the Visible Property to Visible.
Or, use this line of code (for example):
Sheets("SAPBEXqueries").Visible = True
to return it to its original condition, the VBA command is:
Sheets("SAPBEXqueries").visible = xlSheetVeryHidden
Now I must tell you that anything you do from this point on is not covered by your warranty. Don't worry, you can't break BW. But, you can create a beautiful report that stops working with the next system patch that gets installed.
Now that you are looking at these sheets, you probably would like to have a guide as to what they contain. I posted some of that a few months ago. I can't locate the posting right now. You can do a search on my name to find it. Or, if you wait, I'll find it and post the link to this thread.
But ... there is a better way than reading my old posting. Try this ... refresh a query in Excel. Then, come back to the Visual Basic Editor. Select the BW Analyzer Object ... SAPBEX(sapbex.xla). Then, on the VB Editor menu, select Run >> Run Macro (F5); scroll down to sapbexDebugPrint and run that macro. It will create an amazing workbook that tells you everything you could ever want to know about the query you just refreshed. (Including a complete list of valid OLAP fire commands.)
By comparing the various worksheets in this amazing workbook with the tables in the very-hidden SAPBEXqueries worksheet, you can learn what just about every one of those tables is all about.
But ... before you get too carried away with making changes to the values on those sheets ... I have found that I can do almost everything I need to do without ever needing to touch those very-hidden worksheets.
What I use mostly are the API functions. Some of these are listed in the BW documentation. But, there are about as many API functions that are NOT documented. To find the API functions ... in the VB Editor, select the BW Analyzer object ... SAPBEX(sapbex.xla). Then, select on the VE Editor menu bar, select View >> Object Browser (F2). Change the Library to SAPBEX (this does not work unless you have already selected the SAPBEX oject). In the Classes column, scroll down to xBEXapi. You will now see listed all of the API functions and subroutines.
The Object Browser tells you ALMOST everything you need to know. Most people need a few examples to get them started. You can look at my postings here to find examples. Or, just do a search on "SAPBEX". Almost every hit will lead to a discussion and/or example of these API functions.
When you have more questions, write back.
- Pete

I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is

I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is my download messed up and not giving me everything I need?

Got a link showing us which video tutorials you're watching and examples of what's missing in your software?

How to use shortDesc in the disabled inputtext

hi,all
i encounter a problem,our team must use disabled inputtext when the text is only used to output string.
the reson we don't use outputext is if there is noting in the outputtext,there is nothing displayed.
how to use shortDesc in the disabled inputtext?
here is the code:
<af:inputText value="#{bindings.shortdesc.inputValue}" disable="true"
id="ot2" columns="25" shortDesc="#{bindings.longdesc.inputValue}"
simple="true"/>
thanks all

Hi,
........... I use JDev 11g ..............
If you make your inputText disabled -----> shortDesc will not be displayed.
You can make a workaround to achieve this by using popup as :
1- add showPopupBehavior inside your inputText as :
<af:inputText label="label1" id="it1" disabled="true">
                <af:showPopupBehavior triggerType="mouseOver"
                                      align="endBefore" alignId="it1"
                                      popupId="p1"/>
              </af:inputText>2- add a popup which will display your shortDesc text
<af:popup id="p1">
                  <af:outputText value="Sameh POPUP" id="ot1"/>
          </af:popup>I hope it is useful.
Sameh Nassar

How to run the variable exit without calling the variable selection screen?

Hi all
I have a query with 2 variables 0P_PRQUA (Previous Calendar Quarter (SAP Exit)) and ZCCDAT02.
ZCCDAT02 is a Key Date variable that is derived based on the last day of the quarter that is entered in 0P_PRQUA. The exit code works correctly when calling up the variable screen and ZCCDAT02 is derived properly.
The problem is that 0P_PRQUA is set to "Can be changed in query navigation". So if the user changes the value of the quarter the exit is not triggered and the value of ZCCDAT02 does not change.
Is it possible to trigger the exit or is there another way to do it? Ideas would be appreciated. I am trying to create a Web Template with a Dropbox box for the Quarter.
Query is written in BW 3.X.
Regards
Chami

Hi guys
Just to restate the requirement. I want the user to be able to change the value of the variable, WITHOUT calling the variable selection screen.
I want the user to be able to change the value of the quarter by using a dropdown box from within the web template. Once that is selected I want the value of ZCCDAT02 to be derived from the new value of the quarter.
Regards
Chami

How to use labview with the handyboard

Hi,
how to use labview with the handyboard
Thx...

I'm assuming you're talking about this, since you didn't provide a link for those of us who don't know what you're talking about.
As the other poster said, you didn't say how you want to use LabVIEW with it. If you want to write LabVIEW programs than run on the microprocessor, then you're out of luck. If you want LabVIEW to interact with it, then you've got a couple of options, SPI probably being the best, but it also has DI and AI that you could use to communicate with it - the DI's could be used as a parallel interface.
Message Edited by Matthew Kelton on 12-17-2007 02:21 PM

How to use PS to judge the existence of a folder in the specified directory and how to use PS in the specified directory to create to create the folder?(javascript)

1,How to use PS to judge the existence of a folder in the specified directory?(use javascript)
2, how to use PS in the specified directory to create to create the folder?(use javascript)
Thanks you!

Thanks you!

How to use Keyfigures in the Bex variable selection screen.

Similar Messages

Maybe you are looking for