How to use the variables of Function exit in the include program

i have a problem of using the variables of a function exit in the include program..
If i use those variables there will be an error indicating 'Field FEBVW_IN is unknown. It is neither in one of the specified tables nor defined by a DATA statement'. Please help... Below is the code of the function exit:
FUNCTION EXIT_SAPLIEDP_202.
""Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(IDOC_CONTROL_INDEX)
*"     VALUE(IDOC_DATA_INDEX)
*"     VALUE(FEBVW_IN) LIKE FEBVW STRUCTURE FEBVW
*"     VALUE(FEBKO_IN) LIKE FEBKO STRUCTURE FEBKO
*"     VALUE(FEBEP_IN) LIKE FEBEP STRUCTURE FEBEP
*"     VALUE(FEBRE_IN) LIKE FEBRE STRUCTURE FEBRE
*"     VALUE(FEBPI_IN) LIKE FEBPI STRUCTURE FEBPI
*" EXPORTING
*"     VALUE(I_FIMSG) LIKE FIMSG STRUCTURE FIMSG
*"     VALUE(FEBVW_OUT) LIKE FEBVW STRUCTURE FEBVW
*"     VALUE(FEBKO_OUT) LIKE FEBKO STRUCTURE FEBKO
*"     VALUE(FEBEP_OUT) LIKE FEBEP STRUCTURE FEBEP
*"     VALUE(FEBRE_OUT) LIKE FEBRE STRUCTURE FEBRE
*"     VALUE(FEBPI_OUT) LIKE FEBPI STRUCTURE FEBPI
*" TABLES
*"      IDOC_CONTROL STRUCTURE EDIDC
*"      IDOC_DATA STRUCTURE EDIDD
*"      IDOC_AVIP STRUCTURE AVIP OPTIONAL
*"      IDOC_AVIR STRUCTURE AVIR OPTIONAL
*"      IDOC_AVIT STRUCTURE AVIT OPTIONAL
*" CHANGING
*"     REFERENCE(IDOC_AVIK) TYPE AVIK OPTIONAL
*" EXCEPTIONS
*"      PROC_ERROR
INCLUDE ZXF08U10.
Here is the code for the include program.
INCLUDE ZXF08U10
MOVE febvw_in TO febvw_out.

Sometimes you will get this error message when checking include code in exits even though there is really no error - it happens because the include does not realise it is in the function due to the navigation index being out of date.
Try activating the code - it may work even though the check said there were errors.
You can also get this issue when trying to drill down on the field in the include to view its structure.
Andrew

Similar Messages

How to use formula variable in customer exit

Hi all,
I just want to use formula varible in customer exit
For eg,
I have created formula variable with user manual lnput eg: ZFM_V01 = 30
Another char variable with user manual input eg: 0keydate = 28/02/2011
Required output,
I just want to read my ZFM_V01 value in customer exit
Result = 0KEYDATE - ZFM_V01
EG:
result = 28/02/2011 - 30
Required result = 29/01/2011
Kindly guide me how u get formula varibale value into customer exit(CMOD) and find the required result. please help me.
Thanks & Regards,
R. Saravanan

Sorry, Bhanu,Ashwin need more info
As my understand ::
Function module RSW_CURRENCY_TRANSLATION uses the following parameters
Import parameters
I_CTTNM : Currency translation key (optional)
I_AMOUNT: Amount in source currency (not optional !!) (data type: floating point !!)
I_SCUR : Source currency (optional) I_TCUR : Target currency (optional)
I_TIME_IOBJVL : InfoObject for determination of the time reference (optional)
I_SCUR_IOBJVL : InfoObject for determination of the the source currency (p.eg. 0COMP_CODE) (optional)I_TCUR_IOBJVL : InfoObject for determination of the the target currency (p.eg. 0COMP_CODE) (optional)
I_PERIV : Fiscal year variant (optional)
I_RATE : Exchange rate (optional)
Export parameters
E_AMOUNT : Amount in target currency (data type: floating point !!)
E_RATE : Exchange rate
E_SCUR : Source currency
E_TCUR : Target currency
I created a Currency key(ZXX) which takes CAD and converts to GBP on Planned Exchange rate (P) with time reference 0CALMONTH.
In my case :
Currency Key : ZXX (Confused here)
Source Curr :CAD
Target Curr :GBP
I need a Variable ,which takes time reference and gives back the exchange rate .
,,I am I missing some thing ?
Sudh

How to use local variables declared in b/t the methods in other views

Hi
i need to use the value of the local variables declared in b/w the views in one other view,as i have manipulated the value based on some condition & want to use it in 1 more view for my req.,but that variable is not global one just for once i need to use it,and i can't again write the whole for its conditions,as its there in initialization view,which if coded again,can hit the functionality there,so is it possible to use the value of such local variables thereafter or not,if yes pls let me know,or i need to declare the global variable for this.

hi,
1.Declare an Attribute in Component controller.
2. Pass the value to this Attribute in View V1.
using :
wd_comp_controller->Att = 'Saurav'.
3. Now in view2 , you can access this Attribute using:
data lv type string.
lv = wd_comp_controller->Att .
Here Att is my attribute of type string declared in component controller.

How to use formula variable to calculate the days for a document.

Hi expert.
I have a question, I need to calculate how many days it cost for a document, therefore , it should be like this,
cost days = clearing date - creation date..
how can I implement this calculated key figure by formula variable..
Here cost days should be a key figure, but the clearing date and creation date are the characteristics in the document.
it seems that formula variable by replacement path can not be used, do I have to use the customer exit for this variable ??
any other good ways to calculate the cost days (beside during the data loading or by virtual key figure).
I just want to implement this in the query designer..
Please give a detailed steps if you could, thanks a lot.

Hi,
These steps below are for the query designer in BI 7.0:
1. First create a Formula in the Columns.
2. Edit the formula, in the "Available Operands" see for the "Formula Variable".
3. Right Click on the "Formula Variable" folder and then create a new variable.
4. Edi the Formula Variable in the edit screen provide the Description and Technical name; select the processing by as Replacement path.
5. In the reference characteristic select your characteristic "Creation Date".
6. Save the variable.
7. Select the variable into the formula and name the formula as Creation Date.
Repeat the Same steps for the "Clearing Date".
Then create another formula for the Cost days in which you mention as Clearing date (Formula) - Creation Date (Formula).
Hope your issue is solved...
Regards,
Ravi Kanth

How can use a variable in the folowing code?

How can use a variable 'W_ROWNUM2' in the folowing code?
MOVE '1' TO CNT.
LOOP AT L_T_PM2.
              CONCATENATE '0' CNT INTO W_ROWNUM2.CONDENSE W_ROWNUM2.
               CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
    perform DYNPRO_FIELD       using FLD2
                                 L_T_PM2-vari12_con.
               CNT = CNT + 1.
               CONDENSE CNT.
ENDLOOP.
I need to increment the value of W_ROWNUM2.
Please ,it is urgent!!

Hello
CONCATENATE 'F110V-VARI'W_ROWNUM2'(01)' INTO FLD2.
Try using spaces between parts of the resulting string.
CONCATENATE 'F110V-VARI' W_ROWNUM2 '(01)'   INTO FLD2
Regards
Greg Kern.

How to use bind variables in the following query

CREATE OR REPLACE PROCEDURE MMDB.test IS
sel_qtn VARCHAR2 (10);
CURSOR PT_QUANTITY IS select * from mmdb.product_tree WHERE QUANTITY_CHECK ='E'
AND run_id = 100
a PT_QUANTITY%ROWTYPE;
BEGIN
FOR i IN PT_QUANTITY
loop
sel_qtn := i.quanttity-1;
While sel_qtn>=1
loop
insert into mmdb.product_tree (BILLING_ACCOUNT_NO ,S_CODE) values (i.BILLING_ACCOUNT_NO ,i.S_CODE||'E');
sel_qtn :=sel_qtn -1;
End loop;
commit;
end;

Don't duplicate threads: How to use bind variables in the following query

How to use a variable to specify the color when setting an attribute

Hi
We are using BI Publisher (XDO) embedded in e-Business Suite. So we are effectively on version 5.6.3.
I would like to conditionally set the background-color attribute of cells in a table by using a variable reference; something like this (the ways in which I have tried):
<?attribute@incontext:background-color;$exEmpBGColor?>
<?attribute@incontext:background-color;'{$exEmpBGColor}'?>
The 'standard' way of doing this would be:
<?attribute@incontext:background-color;'#CCCCFF'?>
Can anybody please help? (i.e. is this even possible?)

Thanks that works.
I was using a variable, so I adapted your example to use the variable, not an element.
<xsl:attribute xdofo:ctx="block" name="background-color"><xsl:value-of select='$exEmpBackgroundColour' /></xsl:attribute>
Regards

How to use a user defined function module in IP

Hi All,
Can you please guide me on how to use a user created function module in IP? My requirement is to have 2 exit function modules to be used in IP to load the falt file data into a cube..
Regards,

Hi,
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
thanks to Marc Bernard
Regards

How to use string variable onside quotes

Hi,
i would like to know how to use string variable onside quotes. what i mean is if i have a LOV variable P_STATUS as character string.
and in my PL/SQL function i give a query as
Q AS VARCHAR2(1000) := 'SELECT * FROM EMP
WHERE STATUS = :P_STATUS';
Is this correct. I Know that the above statement works when the LOV is an integer, but when i use a character LOV return value the above statement does not work. how can i get in the character LOV value.
Can someone help me please.
Thanks,
Philip.

916753 wrote:
Yes I tried binding all the values separately. It is working, but, I am trying to pass all values by variableBut you can't. The variable is holding a single string value.... that is just 1 value. Your binding are expecting multiple values. You can't bind 1 string value and expect Oracle to magically know how to break your string up into seperate values for the bind variables. What if one of your bind variables actually needed e.g. a comma seperated string as it's value? How would Oracle know that?
You must bind each thing seperately. That's the way cursors work.
, because i have more than 150 tables in which data will be load. that's why i m trying to create a unique procedure to load data one by one table. Otherwise I have to write individual procedures for per procedures.It's a hard life being a software programmer, but somebody's got to do it. Unfortunately there are too many people who try and write "generic" procedures and expect them to just work. I mean why don't Oracle just implement some SQL command so you can do...
execute immediate 'load all my tables';save us all the hassle eh!? ;)
when i write all the columns like
execute immediate (insert_string) using rc1.TOLL_ID, rc1.LANE_ID, rc1.RECEIVED_DATETIME, rc1.LANE_QUERY, c1.EXECUTED_DATETIME
but it is not possible to generate runtime variable thats why I m trying to assign all values to a single variable and use it like
execute immediate (insert_string) using (v_string)
how can I separate the values and ho to use it .Don't use execute immediate. Use the DBMS_SQL package instead and bind your values dynamically with loops to cover all the columns you need etc.

How to use Logical database in function module?

I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.

You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards

How to use bind variables in this procedure

Hi Experts,
How to use bind variables in this procedure for static queries.
PROCEDURE DELETE_MER_PROC (M_id IN NUMBER)
IS
BEGIN
V_date DATE;
SELECT PD_DATE INTO v_date FROM PD_MAINTAIN;
    DELETE FROM MER_CLEAR
    WHERE MER_DT < v_date
    AND ID = M_ID;
COMMIT;
END;
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
Please help me.
Thanks.

976208 wrote:
How to use v_date and m_id as bind variables in this procedure to avoid hard parsing.
You cannot avoid hard parsing - as the 1st time a SQL statement (like the SELECT or DELETE statements in your code) is encountered, it does not reside in the server's Shared Pool, and needs to be added into the pool via a hard parse.
Bind variables does not prevent hard parsing. Hard parsing happens when the SQL statement (with or without bind variables) is a brand new statement encountered by the server.
Bind variables enables the same SQL cursor to be reused, by simply changing the bind variable value.
Not using bind variables means that each SQL statement is unique and not shareable - as the value is hardcoded into the statement and cannot be changed via a bind value. This typically means LOTS of different SQL statements (where the only difference is the changed value in the statement) are created - with each statement being a new statement not seen before in the Shared Pool and needing to be hard parsed.
One does not design one's code not to be hard parsed. There ALWAYS will be a hard parse in order to get a SQL statement into the Shared Pool. One designs one's code to REUSE cursors in the Shared Pool.

How to use Bind Variables in Essbase data control

Hi,
I am trying to use Bind Variables in MDX query while creating the Essbase Data Control. I have used the below query with the Bind Variable.. this query is working in Essbase admin console..but it is throwing error (*Invalid MDX Query)* while creating Essbase Datacontrol in JDeveloper.
MDX Query : SELECT {[Measures].Msr_2} ON COLUMNS, [Time].Children ON ROWS FROM cube
where ($name)
Could any body suggest me on how to use bind variables with Essbase Data control.
Thanks,
Swathi

Hello Swathi, can you please help me how you created Essbase DataControl? Also were you able to figure out this?
Thanks, Praveen.

How to use bind variable

Hi,
I have the below cursor 1 which is working already.For my requirement i want to use bind variable like second cursor.But its telling Bind Variable "p_col_list" is NOT DECLARED.Please any onehelp me on this.
How to use bind variable Here.
Cursor1:
DECLARE
emp_cv sys_refcursor;
iid NUMBER := 1;
i_sql varchar2(100);
p_col_list varchar2(2000) := 'aaa,bbb,ccc,ddd';
BEGIN
i_sql := 'select '''||REPLACE(p_col_list, ',', ''',''')||''' from dual '||CHR(10) ;
dbms_output.put_line(i_sql);
OPEN emp_cv FOR i_sql ;
END;
Cursor2:
DECLARE
emp_cv sys_refcursor;
iid NUMBER := 1;
i_sql varchar2(100);
p_col_list varchar2(2000) := 'aaa,bbb,ccc,ddd';
BEGIN
i_sql := 'select '''||REPLACE(:p_col_list, ',', ''',''')||''' from dual '||CHR(10) ;
dbms_output.put_line(i_sql);
OPEN emp_cv FOR i_sql using p_col_list;
END;

hello,
the reports parameterform capabilities are limited. if you want
to create sophisticated parameterforms, you should do that with
oracle forms or html forms.
regards,
the oracle reports team --pw

How to use a user defined function in XI

Hi Experts,
I would like learn how to use a user defined function in Xi during mapping . Is there any step by step on that.
Besides during when me make communcaton channels I see the following tabs...Paramters ..Identifiers ...Module...
The module that is given here ...where and how it is used.

Hi,
You can write UDFs in java in Graphical mapping to enhance your XI Graphical mapping functionality
The steps for doing it would be:
1. Click on Create New function Button found on Bottom left corner on your XI Mapping window.
2. Write your java code.
3. Run the Mapping Test as usual.
>>The module that is given here ...where and how it is used.
The adapters in the Adapter Framework convert XI messages to the protocols of connected external systems and the other way around. When doing so, some
functionality might need to be added specific to a situation which is possible with the use of custom modules.
Typical example would be validation of file content when using a File Adapter or modification of the message payload to a common content structure which is not supported by any of the standard SAP modules.
An Adapter module is developed as an Enterprise Java Bean and is called locally by the Adapter.
An example on modules :
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/da5675d1-0301-0010-9584-f6cb18c04805">How to develop a module for reading file name in a sender file adapter XI 3.0</a>
Cheers,
Chandra

How to use java api for function activity in embed oracle workflow?

because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

The Java Function Activity Agent is not certified for Oracle Workflow embedded in Oracle Applications. Installing standalone workflow should be a lot easier than what you have found, although it looks like you did hit a Pentium 4 issue with the Oracle Universal Installer. I suggest you contact Oracle Support or Oracle Consulting for assistance.
because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

How to use the variables of Function exit in the include program

Similar Messages

Maybe you are looking for