How to Write Off Stock at Subcontractor's End

Hi Friends,
Few parts are shown at Subcontractors End in the System which has actually been consumed(returned). Now we want to remove those stock from Subcontractors stock. How can we write off those stock???
These are very old stocks, is there any other method to consume those materials??
Please help
Thanks in Advance,
Ritesh

there are diffrent ways to reduce this stock
either do it by mb1a move typoe 551 and spectiaop stock O
or by physical inventory  cycle MIO1
hope this helsp

Similar Messages

  • Write off Stock at Subcontractor End

    Hi Experts,
    We want to write off the stock lying at stock subcontractor end in SAP thru Physical Inventory Adjustment.  No storage location is assigned to subcontractor stock in SAP. Therefore we are finding it difficult to do it thru MI01, MI04, MI07.
    Please guide how it is possible
    Regards
    ( Rajneesh Gulati )

    Why do Physical Inventory, presumably the SC is telling you, you aren't physically checking.  Why not just process a goods issue to destruction, Movement Type 551 etc., through MIGO for O stock category ?
    Cheers,
    Nick

  • Write Off Stock Provided To Vendor

    Hi all
    Could anyone please tell me what movement type to use to write off stock that is showing as provided to vendor.
    Thanks

    If you are using Physical Inventory route you can create an PI document using T Code MI01 do the rest of process as usual and then post difference with Mvt Type 702.
    Amit

  • How to Write Off Vendor Consignment Stock

    Hi Guys
    I was wondering if anyone could help me with an issue we have with Vendor Consignment Stock. There is a situation where there is stock sitting in Vendor Consignment Stock which is damaged and thus not returnable. This stock is thrown away into waste bins. I would like to know if anyone has ideas in terms of eliminating the stock from SAP without returning it to the Vendor and without causing financial postings in the business.
    Many Thanks
    Brett

    Hi Brett,
    Once the stock is damaged and not returnable , u are liable to pay to the vendor .
    Therefore ur requirement cannot be fulfilled without FI postings.
    Only solution would to take as consumped stock or unrestricted stock and then scrap it.
    Note : FI document will be generated.
    Regards
    Ramesh Ch

  • How to cut off extra time at the end of a movie

    I imported a video about 5 minutes long, then edited it down to 1 minute. There is still about 5 minutes of extra blank space in the timeline and when I render it the space renders as well. I have searched all over the net and I can not figure out how to cut out the extra time off the video. Any suggestions? Thanks

    Welcome Dylan Mcintosh to the  iMovie boards..
    this is the iMovie '09 section of this board..
    .. There is still about 5 minutes of extra blank space in the timeline and ...
    there's no 'timeline' in iM vers 09..
    click in iM on 'About iM' and tell us, which version you use...

  • Write On\Off Stock Without Corresponding IM Movements

    Hey There,
    Our business users have gotten themselves tangled up in some knots. There was a stock count that took place where stock was written on and off our system from an IM point-of-view with the 701 and 702 movements but without the corresponding WM movement alongside it.
    From what I know the correct way to write off stock is to move the stock into the Differences bin and then do the 712 movement to complete the WM movment and do the corresponding IM movment. To write on stock, you should just reverse the processes.
    However, as the business just used the 701\702 movments, there was no corresponding WM movements and so there are stock differences all over the place.
    To complicate matters this stock take took place in a previous period that has been closed and some of the stock has been either sold or moved from an IM point of view.
    We have investigated the issue as best we can and we believe that the best policy is to independantly write on\off the stock from a WM point of view without the corresponding IM movments.
    Is this possible and if yes how? If it is not possible how would you recommend we rectify this situation?
    Many Thanks,
    Colm

    I am getting confused
    You and me both!!
    I am as certain as I can be that after doing my 702 write off there were no TOs or TRs created and the WM stock is sitting in the exact same storage type in LS26 as it was before I wrote off the stock and there doesn't appeart to be any other negative stocks in LS26 corresponding to my write off.
    I have discussed it further with the business and for the write-off issue, they are happy to write stock back on using a 701 movement and then write it off correctly using the 712 movements. e.g.
    Current
    WM 10
    IM    0
    701 Write On
    WM 10
    IM 10
    712 Write Off
    WM 0
    IM 0
    This will satisfy them for the write offs as from an IM point of view it will be a write on followed by a write off and from a WM point of view the stock will then leave correctly.
    However, we can not do the same thing for our stock that was wrote on as it has already been moved on from an IM point of view so the orginal question is still there. Is there a way we can write on stock from a WM point-of-view without updating the IM stock.

  • Stock Write-off Report

    Dear Friends,
    Is there a transaction or Report available to see the write-off stock by plant or through any movement types ? Please suggest
    the requirement is as fallows:
    Report needs to be selectable by IPC or ICC. Or plant
    The report will need to show the stock that has been written off in Quantity of the item, the cost of this stock. And where the stock was written off.
    The report should provide a total cost per plant and a total cost per item. At that plant. Where multiple locations are viewed the total cost sum for the plants should be provided.
    Regards
    Prakash

    Hi Prakash
    Could you please clarify the following
    1. Is this write-off stock means stock posted to scrapping (551 mvmt)?
    2. What do you mean by IPC and ICC?
    If you can able to bifurcate the write-off through mvmt 551 (or any other) you may get all your requirements in MB51 report itself.
    Thanks/ GVRR

  • Stock Write Off

    Hi All
    I need some help on which movement type to use to write off stock directly to a GL account without assigning a Cost Centre.
    Vishnu

    561 Initial entry of stock - unrestricted-use stock
    563 Initial entry of stock - quality inspection
    564 Initial entry of stock - blocked stock
    During initial entry of stock balances, you enter the physical warehouse stock frigures or the book inventory from your old system into the SAP System for productive operation. This data entry usually takes place by means of batch input.
    Possible special stock indicators: E, K, M, O, Q, V, W (565: only E, K, Q)

  • Write off asset under construction

    we have one AUC, we have create a PO for this AUC, the AUC has amount of 200K USD, we haven't transfer it to fixed assets, how to write off the AUC, (we want to completely write off  this AUC, because the company code which creates this AUC going bankruptcy), I tried ABAON, ABAVN, but this is specific to asset, asset under construction can't be used. any idea? thanks

    Hi,
    1)  AIAB - Distribute  (update a rule with G/L settlement with a GL account for 100%)
         AIBU - Settle (Execute settlement)
    Or
    2)
    Posting direct FI entry.
    FB01
    Debit 40 posting key GL expenses to which you write off,
    Credit 75 posting key Asset #
    Best Regards,
    Madhu

  • Ref in MBIA for stock write off required to be reflected in GL

    Dear Forum,
    We have a scenario where by the Approval is obtained before the stocks could be written off and the users want this manual approval no. to be recorded while creating the transaction for stock write off thru MB1A, such that this approval no. appears in the Stock Write Off GL against each of the line items for write offs. How could we achieve this? Is there a way to handle this.
    Thanks!
    Regards,

    Hi Shukitz,
    Thanks for the prompt response. Are you referring to the Doc Header Text, I tried putting the approval no. there but it does not get reflected in the GL Account. Is the item text different and where can I find the same in MB1A?
    Thanks once again for the help!
    Regards

  • Itunes writes off $ 1 each time they connect to the Internet. Shopping at the time was not. For what? How do I know?

    Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?

    Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?

  • How to map Write-Off details to GL

    Hi,
    I'm using cst_write_offs,cst_write_off_details tables in one of my query. I want to know how we can map these tables to the GL tables.
    Scenario:
    Need to fetch rcv_transaction_id and po_distribution_id from the above write-off tables.
    I am getting WRITE_OFF_ID from other query which I'm passing to these write-off tables to get the write-off data.
    However there are multiple records in the cst_write_off_details table for one WRITE_OFF_ID. I found that AE_HEADER_ID and AE_LINE_ID combination is unique for these records.
    Is there any chance of getting single record from this table?
    Is there any revelence in AE_HEADER_ID and AE_LINE_ID with GL header and line details and can we map those?
    Please help.
    Thanks and Regards,
    Ravindra

    user12228525 wrote:
    Is there any revelence in AE_HEADER_ID and AE_LINE_ID with GL header and line details and can we map those?
    Hi Ravindra,
    The AE_HEADER_ID is a reference for an accounting entry created at subledger level .... it is not directly linked in to GL_JE_HEADERS/ GL_JE_LINES , however the link between them is made available in the GL_IMPORT_REFERENCES table.
    In the GL_IMPORT_REFERENCES table, you have a column for JE_HEADER_ID which is a reference available in GL_JE_HEADERS Table ... and you have a column for REFERENCE_7 which is a reference to the AE_HEADER_ID in the XLA_AE_HEADERS table.
    Regards,
    Ivruksha
    Edited by: Ivruksha on Dec 11, 2012 7:30 PM

  • Write-off the MM inventory stock

    Dear expert,
    I want write-off the MM inventory stock which is expired, please give the step & procedure.
    Regards,
    PK

    Dear Learn New,
    PI Process -
    Creation of Physical Inv Doc by MI01
    Entering ZERO COUNT (Tick of ZC Box in PI Document by T CD - MI04
    and posting the document by MI07 (individual document) or MI20( List of documents)
    System will adjust inventory automatically by 702 movement type as a issue and financial impact will be in Loss Account as loss due to Physical imbalance in stock.
    You can alternatively withdraw stock for Scrapping by movement type 551.
    Thanks
    Raghavan

  • How to record receipt write off for the PO receipt ?

    How to record receipt write off for the PO receipt ?

    You can refer this link
    http://docs.oracle.com/cd/A60725_05/html/comnls/us/po/rcvacc07.htm
    thanks

  • Write Off Quantity and value

    hi,
    How do I write off the value and quantity for the stocks?
    For stock materials we do the physical inventory - entering count adjust qty and posting adjust vale . But how can I adjust for value only articles?

    Hi,
    That will be easy for you to post MI10 document .This will write of the quantity and value of that quantity.
    If you want to change the standard price of the material post a MR21 document.
    Regards,

Maybe you are looking for