Howto monitor a DPS wihtout using the proxy manager user by ldapsearch

Hi,
I want to provide some monitoring scripts to our monitoring team, but don't want to give them the Proxy manager user credentials to bind to the cn=monitor tree.
I was wondering if there is some kind of work-around for this.
I tried to create a datasource that references localhost, but that doesn't seem to work ... Or I'm failing to do so.
Anyone get a clue ?
DPS v6.3.1
regards,
Vincent

Assuming that your middle tier is using a connection pool (the norm), the problem is that there is no relationship between a particular user's logical session and a physical database session. Each page the user hits in the application, for example, is potentially going to use a different connection from the connection pool and thus a different database session. And different users may be using the same database session just before and just after your user.
In general, when you have this sort of architecture, you need to have instrumentation built into the middle tier application in order to get anything useful done, at least to the point that the middle tier can enable and disable tracing when it gets a connection from the pool for a particular logical user session. Otherwise, you could enable tracing for the entire database, which is going to be a significant overhead, and try to comb through dozens of trace files to figure out what sessions were related to your particular user, which is at a minimum likely to be a substantial undertaking.
Justin

Similar Messages

Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

You can output audio thru HDMI, with appropriate adapter.
You can use additional cheap external usb audio for monitoring.

After I installed the Moare recording, the firefox can't connect to internet. BTW I used the proxy and it works fine in another browse.

After I installed the Moare recording, the firefox can't connect to internet. It worked fine before I installed Moare.
I used the proxy and it works fine in another browse.

I can not find "Moare recording" on the internet. Please see the following thread for troubleshooting. [https://support.mozilla.org/en-US/questions/935081?esab=a&s=proxies&r=3&as=s following thread;]

I use the proxy settings add-on in Firefox to access my company server. However, I updated Firefox this morning to the latest version. Now this add-on doesn'tl.

I used the proxy settings add-on to access the company server and wi-fi with my Android 2.36 phone.
This morning I updated Firefox. The add-on doesn't work anymore. I uninstalled it and went to the add on website to reinstall what I thought must be a new version. This add-on doesn't seem to exist anymore.
How do I change proxy settings with the new version of Firefox for Android?

The author of the add-on will need to update their version to be compliant with our newly rewritten Firefox for Android product.
The new version of Firefox does not provide a user-interface for manipulating proxy settings.
On the other hand, you can manipulate these settings yourself at your own discretion by visiting the URL about:config and searching for network.proxy
http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries

Can I use the Profile Manager as an MDM while distributing app through app store?

Is it possible to use the Profile Manager within the OSX Server to provision profiles through apps purchased in the app store?
Ex: userX buys app in the app store, in downloading the app they get enrolled in the MDM / OSX Server I control. They select profile settings within my app and submit to OSX Server (Profile Manager) at which point I send back OTA the provisioned profile for them to upload.
Ex: https://itunes.apple.com/us/app/parentkit/id600618138?mt=8
Thanks for the feedback!

Is this not possible? Is it possible but not allowed?

Issue while posting the invoice in background using the WF-BATCH user

Hi Friends,
I am facing an issue while posting the invoice in background using the WF-BATCH user. I am using a invoice approval workflow where in when the approver approvers the invoice the invoice document get posted using a background method, which uses BO FIPP and Method POST and i am returning the Message Text to my workflow container from this method. When i see the log an exception is rasied from this method with an error message "V004: You are not authorized to change this document", but WF-BATCH is having SAP_ALL and SAP_NEW authorizations. If i try to post the invoice using the method from my user id it is getting posted. What could be the issue. Please advice.

Hi Sapient,
The Parameter, Roles would be different for the LOGIN USER and WF-BATCH.. So ask your administrator
to set the Roles & Parameters similar to that of LOGIN USER to WF-BATCH.
For further refrence check in SU01 giving the LOGIN USER and then check with WF-BATCH... you would
find the difference...
Hope this would help you..
Good luck
Narin

Using the transition manager on a movie clip prevents me from physically moving it after that

Hi,
I'm using the transitions manager to animate certain objects
in my movie. let's say I'm using it on a ball - using the following
code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
function zoomIn(_mc) {
new Tween(_mc, "_xScale", Bounce.easeOut, 0, 100, .3, true);
new Tween(_mc, "_yScale", Bounce.easeOut, 0, 100, .3, true);
function zoomOut(_mc) {
new Tween(_mc, "_xScale", None.easeIn, this._xscale, 0, .05,
true);
new Tween(_mc, "_yScale", None.easeIn, this._xscale, 0, .05,
true);
and then calling it later with this:
zoomIn(ball_mc);
That works fine. But at a later stage of the movie I then try
to move the location of the ball - not with code but by adding a
key frame and physically moving it's location. When I play the
movie back it does not show that it moves.
I'd really just like to know why this is!
Thanks,
Ray

I think that once the Tween plays, the ball_mc, now resides
in it's final resting place, it might do this with all instances of
the mc, interesting though. I would have thought the same, maybe if
you move it and give it a different instance name it will not
effect the position on the new keyframe.

Firefox will not open - I have reinstalled and used the profile manager solution. It was fine earlier today. IE working fine.

I tried the suggested solutions including the 'clean install', any help would be most appreciated. I've used the Profile Manager, which is not much use when the browser won't even open to test it. I've also reinstalled twice, installed updates and restarted numerous times.
Firefox does do this on occasion, but usually sorts itself out - not this time.
Help!

You should check for malware or go back into regular mode and see if temorarily disabling your antivirus helps.
You can try these free programs to scan for malware, which work with your existing antivirus software:
'''Scan with all.'''
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.

Using the Security Manager to restrict access to a single package

After reading up on the Security Manager, the package.access property and the use of the [accessClassInPackage RuntimePermission|http://java.sun.com/javase/6/docs/technotes/guides/security/permissions.html#RuntimePermission] , it seemed to me that it would possible to set up the following: I have a security-sensitive code base packaged in a jar, and I want to make sure that only one client code base that I specify is permitted to access it. The idea here is to prevent malicious code from executing anything in the sensitive code base; the sensitive code is only accessible to one client that I name in a security policy file. Perhaps rather foolishly, I advised a client to consider this before testing out a sample myself, because much to my surprise, it appears to me that it isn't possible to get the Security Manager to do this at all. Am I missing something? I'm a bit startled by this conclusion -- it seems like such an obvious use for the Security Manager, I'm hard-pressed to be believe that it can't be done, and more inclined to suspect that I'm going about it wrong.
Here's what I thought I could do: set up the package.access property so that it denies access to any package; then in the policy file, grant the RuntimePermission/accessClassInPackage to the client code base that is permitted to access the sensitive code.
Of course, you wouldn't want the package.access property to exclude all packages in the global java.security file, because then no code could be accessed at all. It would be necessary to use the trick of resetting the package.access property within the code, as [illustrated in the secure coding guidelines|http://java.sun.com/security/seccodeguide.html#1-1a] .
But the problem lies in the idea of "use the package.access property to deny access to +any+ package". There doesn't seem to be any way to use wildcards or the like with the property -- it has to specifically name packages (or package prefixes) to which access is forbidden. It wouldn't do to try to name the packages to which I'm trying to prevent access, since we're trying to prevent access from malicious code -- the attacker could just choose package names that aren't on the list. I'd really need to say that access is denied to all packages, except for those in the permitted code base, but the security mechanisms for package access don't seem to allow that.
Moreover, the trick of changing the value of package.access can't be done within the client code -- otherwise, the attacker client would just set the property to his own purposes. But it can't really be done within the sensitive package either, because the whole idea is to prevent access to that package, and by the time it's busy setting the property, it's already too late, because the package has to have been accessed by a client to get there at all.
It seems to me that this a symptom of something I've never really understood about the design of the Security Manager -- you can grant permissions to specific code bases, but you can't revoke permissions from specific code bases, let alone all code bases. What I want to do here is grant access permission to one specific code base and revoke it from all others. There doesn't seem to be any way to express that with the mechanisms of the Security Manager.
The more I look at it, the more it seems that there's just no way to use the Security Manager this way -- set up package access so that a specific code base can only be accessed by one specific client code base. There are surely other ways to get the effect that I'm looking for, but as far as I can tell, none of them involve restricting package access (for example: define a custom permission, grant it only to the permitted client. and check against that permission within the sensitive code base; meaning that the sensitive code has to be accessible to anyone in the first place). This conclusion really surprises me (not to mention my bit of embarrassment with the client); wouldn't this be precisely the sort of thing the Security Manager ought to be good for?

You're looking at this back to front. The security policy file is there for the client to decide how much access he is going to give this application, not for to application to restrict who can use it. If you want to control what used to be called 'state orientation' you can do that directly by looking down the stack trace inside your code.

How enable my AMD adapter using the device manager

The message that comes up after updating my AMD driver is this:
The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter. Please update your AMD graphics driver, or enable your AMD adapter using the Displays Manager.
I am running Windows 7 Home premium
HP Pavilion DV 7 notebook pc
Intel Graphics 3000
Radeon HD 6490M
please help

I'm new to this
What is the solution?

Firefox is running in the background, but the process can't be ended using the task manager?

The program wouldn't open because it was apparently still running in the background, so I restarted a few times which didn't help. Then I tried using the task manager to end the process but that didn't work either. Then opened the command prompt and used taskkill, then pskill (using the PID number) but neither worked. The problem wasn't with how I was using these commands as they could close any other program I had running, just not firefox.exe*32. Any ideas?

Try:
*http://kb.mozillazine.org/Firefox.exe_always_open

About 2/3 of the time I leave Firefox, it is evidently retained in memory so I can't restart it without using the task manager. I don't use Norton or Skype programs. How do I keep this from happening?

About 2/3 of the time I leave Firefox, it is evidently retained in memory so I can't restart it without using the task manager. I don't use Norton or Skype programs. How do I keep this from happening?
== After I have used Firefox and "closed" it.

See this:
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

Create a recovery catalog by using the Enterprise Manager Console

Dear Sirs:
I am using the Oracle9i database release 2. After installing the management server and running the Enterprise Manager Configuration Assistant, there was no recovery catalog and no CATTBS tablespace created. According to the Help and to your documentation entitled Oracle Enterprise Manager Configuratrion Guide this recovery catalog and CATTBS tablespace should be created automatically.
Of course I am not running any target database on the same machine.
How can I create a recovery catalog by using the Enterprise Manager Console, and not by using the rman command prompt?
Please its urgent and I need an answer as soon as possible.
Thank you in advance with best regards

Dear Sir:
Thank you very much for your reply, but unfortunately it didnt help me. This article is repeating what is mentioned in the Help and the documents that I downloaded earlier. As I said earlier I know how to setup the recovery catalog by using the rman command prompt, but I couldnt do it by using the Oracle Enterprise Manager Console. By using the wizards it is supposed to be created automatically but nothing of this happened.
Please I need help urgently.

Hi everyone, to use the portal with many users using the same portal user?

I have an another question is possible to use the portal with many users using the same portal user with diferent roles in the same time?
thanks

Hi Israel,
It is possible to have same user logged in through differnt terminals or browser windows. However if there are say 10 roles assigned to that user, all 10 will be visible in all the windows. However you may open and work on different roles.. in the different windows.
Note that the real time collaboration features shall not be available if the same user logs in multiple times.
Hope this is useful.
Regards,
Anagha

Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

Is it possible to use Apple Configurator to do a remote wipe of an iPad? Or must I use the profile manager tool within OS X Server?

no apple configurator connects via usb
you'll need a MDM solution such as OSX server profile manager for remote wipe
OTA pushing profies remote wipe etc
you could use icloud for remote wipe

Howto monitor a DPS wihtout using the proxy manager user by ldapsearch

Similar Messages

Maybe you are looking for