HP 2200 dtn printer not found by one Mac on network

My local network comprises a desktop Mac Pro connected through an ethernet hub to a Time Capsule, and four Macbook Pros connected to the network by Airport wireless. All Macs are running OS 10.8.5. A HP 2200 dtn printer is connected to the network through the ethernet hub. This network has been very reliable. After replacing a faulty JetDirect card on the printer and deleting the printer on all machines, all the Macbooks readily detected the printer and automatically reinstalled it and there is no problem with printing. The Mac Pro is connected to the network by ethernet, but it cannot detect the printer and it does not appear as an option for installation. I have tried installing the printer by entering its static IP address, selecting JetDirect, and selecting the HP 2200 driver from the software list (or the generic PS driver). But in both cases I get a message "unable to verify printer on your network...unable to connect due to an error."
Any suggestions on what to try next?

Hi Good Ole Boy,
I'm sorry to hear that you are having issues with the one Mac Pro and your HP LaserJet 2200 printer.
Your HP Printer is a commercial product. I have included a link to HP Product Support Page for your printer. There is a section that discusses your printer and Mac OS X 10.8.
If the information you are looking for is not there, for more exposure I would suggest posting on the HP Commercial Products forum that can be found at http://h30499.www3.hp.com/hpeb/
HP LaserJet 2200 Printer Series Support
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/home/?sp4ts.oid=28861
I hope this helps.
Happytohelp01
I work on behalf of HP

Similar Messages

Printer sharing problem: printer not found by other Macs over network

We have 2 iMacs and 1 PowerBook, all connected to network through a Belkin router. One of the iMacs has an Epson Stylus hardwired (USB) to it. Printer sharing is ON. In the past, the other two Macs found the printer over the network and printed fine. Recently, they can no longer find the Epson over the network, indeed, when we try to "add printer" in their Printer Utilities, they no longer find any printer at all. Why did it use to work and then stop for no apparent reason, no changes were made (except for occasional need to restart the router if we lost our connection)? What are we missing?

As you suggested, I repaired permissions in all my Macs. That helped; the other Macs could find the shared printer. Then later on I needed to shut off both the host iMac and the printer. When I turned them back on, once again the other 2 Macs couldn't find the printer?! Since I had just repaired permissions earlier in the day I didn't think it could be that again. Then, I printed one page from the hardwired host iMac, and voila!, right after that page printed the other two Macs could spot the shared printer over the network again. I'm glad they came back online, but wish I knew what the heck was going on?! Why would printing one page from the host bring the others back, and did the earlier repair of permissions really have anything to do with it??
Powerbooks G3 & G4, iMac G5, plus Windows Mac OS X (10.3.9)
Powerbooks G3 & G4, iMac G5, plus Windows Mac OS X (10.3.9)

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I can no longer print using wifi. I have to connect a USB cable to print. Setup and pref show that I should be able to print wireless but I keep getting printer not found msg when trying.

I can no longer print via wifi. I could at one time but now I have to connect to printer with USB. All settings appear correct in printer and macbook. Sys pref shows printer with green light next to idle. Sending a print prompt results in "searching for printer, printer not found, ensure printer is turned on". I have reinstalled printer in my print list and reinstalled printer software on macbook. Kodak 5250 AiO printer shows it's configured for and on wifi channel. I go online with laptop using wireless but cannot print. Help!

If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
So, are you able to confirm you have a working connection between the Mac and printer?

Item cost not found for one or more items - Inventory Posting

Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
Sean

Hi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean

Printer not found but my 5510 is connected to the network

Help, my 5510 B111a printer was working fine then suddenly it stopped finding my computer to scan to, and my printed couldn't find it to print to.
I have recently changed my broadband to BT Infinitty 2, but it was working after I changed.
I have restored the the printer to factory settings and reinstalled the new router and it is showing as being connected to the network and shows the IP address.
I re-installed the driver on my laptop but when it tries to add it to the network it comes up as 'printer not found'. I entered the IP adress it gave me when I connected it to the network but it still comes up as not found.
Going a bit mad here now, can anyone help please?

Sorry that you are having a problem with the printer not being found.
Try to disable the firewall and anti-virus.
Also, plug in a USB cable and see if it gets recognized. If so, then it is something on the network that is blocking the printer ports.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Printer not found all of a sudden

I've been merrily printing away from safari to my wireless HP Photosmart C4700 printer for a few months utilizing HD Print Magic when all of a sudden today it's not working. When I click print in safari to print a page, it says printer not found. Normally I click print in safari and it sends it through print magic. I wondered if print magic was seeing the printer, so I opened print magic and indeed the printer was there. Somehow safari is not seeing my printer. Does anyone know how to rectify this? Help would be appreciated!!

If it is a Safari thing only, maybe resetting Safari as described below will help. The first thing that I would try if you haven't done so already is to simply restart your iPad. These are all sort of generic type things but you can give them a shot ....
Go to Settings>Safari>Clear History, Cookies and Cache. Then restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut down. To power up, hold the sleep button until the Apple logo appears. Try to print again.
Try this as well. Close Safari and all open apps. If Safari is open - you have to tap the home button before you close the apps. Double tap the home button to bring up the task bar. Tap and hold down on any app icon in the task bar until it wiggles. Then tap the minus signs in the corner of the app icons to close them all. Then restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut down. To power up, hold the sleep button until the Apple logo appears. See if you can print now.
I guess you could also try rebooting your router - sometimes that can fix wireless issues that crop up. Unplug it from power for about 30 seconds and then plug it in again.
You can also reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds untilt the Apple logo appears - ignore the red slider. See if you can print now.

Hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer

Air port express not found by my mac

Hallo all, I want to extend my wlan, therefore I want to install an additional air port. I have already a time capuse with air port. Now my question:
Do I neet to connect the new air port with a wire? I thougt the connection is wireless? Unitl now the new air port is not found by my mac within the utility air port program. Why? Please help! Thank you, Kailash

To help facilitate setting up your extended network, I would recommend the following:
Perforrm a "factory default" reset on the AirPort Express base station.
Temporarily connect the Express to the Time Capsule using an Ethernet cable between them.
Once you have configured the extended network, you can now disconnect the Express from the TC and place it at the desired location.

Photosmart d110a printer not found

photosmart d110a on a mac with os lion via wireless connection
The printer had been working fine until today. We updated to LION in December but printed fine until today...
I went to support for help. So I went and downloaded latest software and drivers on computer and even used a USB cable so I could check for firmware updates on the printer itself; it said it had latest updates already.
So I go to the HP Installer download (from what was downloaded from updates) and commence to update and configure the printer. My mac can't find the printer still so I use a USB cable to connect them (following directions as I am prompted). Message says 'software is successfully installed. You are now ready to set up your device and software.' I disconnect USB cable.
I click continue and my device is not listed. I even go back to HP site and follow instructions on how to enter the IP manually and still it will not connect.
So I plug the USB back in to mac and it shows my device. I click configure...says it is compatible with wireless networks and I check off box that says "configure your device for a wireless netwk".
Next window says 'application has detected your device is currently connected to the following wireless netwk..." I confirm the wireless settings as correct and say to keep the settings and click continue.
Next window says 'HP device is now configured correctly' and the IP address listed matches the one on my wireless netwk test print pages that I ran and printed earlier. (I turned off printer twice and reran the wireless netwk test and it prints out 'congratulations on successful setup of your wireless printer', shows 'excellent' signal quality and the same info each time...same IP address, etc) **Bottom of this window says "IMPORTANT: please disconnect the USB cable connected to your device now." So I do and click continue.
POP UP says 'device not found on netwk'...'wireless netwk settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the netwk. Please make sure that : Mac is connected to device wired or wireless, device is connected to wireless netwk....'
Not sure if this is worth noting but while the printer is connected via USB, it will print.
Please help! I am sooo confused!!!

Hi MiltonLafer,
Welcome to the HP Forums! I understand you cannot install your HP Photosmart D110a with Windows 7. I am happy to help you! I have a couple of questions for you:
How is your printer connected? Wireless or USB?
Are you using the CD for the install or the online download?
If you are using the CD, I would recommend to try the HP Printer Install Wizard for Windows instead, to see if that works.
Hope this helps you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

TS2634 I cannot print from my ipad. The wireless is connected, I have no trouble printing from my computer. When the ipad looks for the printer it comes back with the message. "Air printer not found" What can I do to correct this? P S Ipad2 is only 1 mont

I cannot print from my ipad. It is connected to the wireless okay. I have only had this ipad for a month and while I am not sure I think it has been okay to print before 2 days ago, when I tried to print and I got the message "Airprinter not found" Has anyone experienced this and if so what did you do about it? I have no trouble printing from my computer.

... Has anyone experienced this and if so what did you do about it?
I rebooted my Airport Extreme.
Try rebooting your router. Make sure its firmware is updated.

Web Services Returns Runbook Not Found For One User, Not for another

i am using Web Service to start runbooks. most users are successful. but one user gets an error "runbook not found". the IIS logs show identical requests to the web service, except for the different username. the user
is an administrator on the machine and is a member of the OrchestratorUsersGroup. is there some other group that the user should be a member of to run web services?

Maybe the user has deniad Access to the Runbook, check in Runbook Designer.
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Ldd libos_gd.so gives "not found" for one lib

Hi,
I am no expert in linux. I am having Redhat 6. During WebCenter installation i found that one of the library is missing. When i execute below command it gives me error
ldd libos_gd.so
        linux-gate.so.1 => (0xf77e1000)
        libwv_gdlib.so => /u01/Oracle/Middleware/Oracle_ECM1/oit/linux/lib/contentaccess/./libwv_gdlib.so (0xf77bd000)
        libwv_core.so => /u01/Oracle/Middleware/Oracle_ECM1/oit/linux/lib/contentaccess/./libwv_core.so (0xf722f000)
        libm.so.6 => /lib/libm.so.6 (0xf7205000)
        libpthread.so.0 => /lib/libpthread.so.0 (0xf71e9000)
        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0xf7130000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xf7112000)
        libc.so.6 => /lib/libc.so.6 (0xf6f7b000)
        libfreetype.so.6 => /u01/Oracle/Middleware/Oracle_ECM1/oit/linux/lib/contentaccess/./libfreetype.so.6 (0xf6f0f000)
        libdl.so.2 => /lib/libdl.so.2 (0xf6f09000)
        /lib/ld-linux.so.2 (0x47706000)
        libz.so.1 => not found
I need 32 bit library of libz.so.1
where can i find this or how do i resolve this dependency?
Regards,
Vikrant Korde.

1. yum install zlib.i686
2. restart your machine.
3. try your command again.
Seriously? This is not Windows, no need to reboot:
# yum install zlib.i686
# ldconfig
Try your command again
No muss, no fuss.

404 page not found in one sub link of SharePoint Site

We have an SharePoint 2010 Farm (a single farm), it was disconnected by accidentally, I reconnected it successfully through config wizard, but as I tested each site in the farm, and found one of links on a site was gave 404 page not found error. The
site (http://xxx:200/default.aspx) is working and other links on this site are working only one link is showing 404 error, I've checked
1) Eventview, nothing related
2) SharePoint Log, nothing related,
3) IIS, running fine since the site is up,
4) checked at CA, site collection and web application are all good.
Where else I should check?
Any help would greatly appreciated.

which link is throwing the error, could you please mentioned that?
Do you have any custom /farm solution deployed into the farm, if yes make sure the solution is sucessfully deployed.
Also make sure if there is any customization which required to that page , still there.
Try to detach the content DB and reattach it.
also try to reset IIS.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Server not found - approx one in three times

For about the last five weeks I have been encountering many delays in getting to web pages and when I do download files they are taking an inordinate amount of time to go through the "download and then open process".
The server not found issue seems to occur on about one page in three. When it has failed (after about 15 seconds) I usually have to try again twice more before it loads. Clearly there isn't an address problem or it would never load. I have been through the Helpdesk route and they cannot find a fault. I have tried lots and seemed to make the most progress in eradicating the problem when I uninstalled NetProtect Plus and reinstalled it. I then had no problem for about three days and after that the fault just seemed to worsen - back to its original state.
As I said. No problem at all until a few weeks ago. Problem temp disappears after uninstalling and reinstalling NetProtect Plus.
Any (good) ideas please? Getting seriously annoyed.
M

I've experienced a very similar, if not the same problem. I am running Windows XP and the problem seems to have started to happen on upgrading to IE8. When I close down the computer indicates that something to do with MacAfee (i.e. NetProtect) is 'not responding'. I don't know if this is linked to the problem or not but indicates to me that I have a software conflict somewhere! Can anyone help? Should I revert to IE7? Thks

HP 2200 dtn printer not found by one Mac on network

Similar Messages

Maybe you are looking for