HP 3420 not working in win7

Dear Hp
I have followed each and every step u told me for installing an alternative driver from downloading the hp 3600 driver to managing in device managger but after follwing each n every step i still cant find solution for my issue,, when i try to prnt a test print my priter dooesn't respond n there is a small yellow error type symbol showing above the printer, i have attached a picture of the problem,, kindly give me a solution for it
regards
diganta

Hi digu1dec,
I understand you have a Deskjet 3420 that you're having issues using with Windows 7. I'm sorry to hear this, but I will certainly do my best to assist you!!
I would recommend that you download and run the HP Print and Scan Doctor and see what suggestions it has to offer.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

Quick time does not work on win7. What do I do?

quick time does not work on win7. What do I do?

Mine works fine with both my iPad and my iPod Touch. Been using it for two years. I recently replaced it with an Apple TV.

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Quick launch buttons and touch functions not working post win7 upgrade

I have several problems that I think are related.
1) When I rotate the screen and then bring it close (as in flat) to the keyboard, the screen goes blank. There is no key combination I can find that restores the screen. Putting it back in notebook orientation doesn't do anything either. Only thing to do is a hard reboot.
2) the quick launch buttons on the screen edge are not functioning as follows:
a) the hp mediasmart button (the one with the wave) doesn't work
b) the screen rotation button produces the same problem as 1) above
c) the third button which looks like either gears or a sun (I don't know what it should do) brings up the windows mobility center, where I have found problem number:
3) On tablet PC settings, the display tab, there is one display: 1. mobile PC display
on the same tab, there is a setup button. The next screen says:
pen input
touch input
Regardless which one I select, on the following screen (where it says Press this screen with ....) when I press with either my finger or the pen, nothing happens. Which seems like either:
it thinks another screen is active or
the touch components are completely non functional.
4) Not surprising, the touch functions are completely non-functional
I have installed all of the drivers for this TX2-1025dx for Win7(64bit) per the HP support/drivers page.
Not all of them resulted in a clean install.
Here are other drivers that I had problems with (meaning that I got an error message, it failed, it had to be done more than once, something else broke, etc.)
AMD AHCI - started catalyst installer then failed
Authentic fingerprint driver - "dpinst64 not marked for installation"
Ntrig Duosense - had to do this one multiple times to get the fingerprint reader to work
HP Mediasmart MVP - hung in CMD
I have checked that all of the startup services are actually enabled in msconfig including quick launch buttons, hpwuschd, and media smart. Nothing is disabled in services.
I have reinstalled the quick launch buttons driver for this product from December 2009. (There is an earlier version from November.)
I installed the bios upgrade (before win7, actually) it is currently F.25
I have also eliminated EMF possibilities.
I have searched the forums, and while I have found some interesting clues, I don't see anything like this - at least with a solution.
Any assistance would be greatly appreciated as this thing is quite useless to me as it currently functions. It is not a tablet anymore.
TIA

[knock knock] Helloooooo??!!??
Installed 6.50.9.1, which is in between the last two quick launch button (QLB) drivers (that did not work). Also fixed the lightscribe and mediasmart DVD installs. Same problems, no touch or pen, and a new bug I discovered with qlb
First, if you search for tablet in the start menu, there is a selection to set the tablet buttons to perform certain tasks. When you run that, it says that teblet buttons are not installed on this pc. Doesn't matter if QLB is installed or not - same error. Hmmmmm. Check with your pc manufacturer..... I think I am doing that. I am starting to feel like I am working for HP.
Next finding: Using mobility center, I found that if you orient the screen to landscape for the slate config, and then rotate the screen, it does not go blank. However, if you rotate the screen back to notebook, it goes blank. And of course it keeps that upsidedown config when you reboot, too. So, the way to recover from that (because you really need a keyboard if you don't have a working pen and touch takes 30 sec to respond) is to keep trying to get touch to orient the screen back to landscape for notebook. Then rotate the screen to landscape for notebook. And uninstall the QLB driver that doesn't work and reboot. But after that, touch and pen did not function.
Since touch and pen had previously been restored when I uninstalled QLB, I reinstalled MVP and smartmenu coz they were the actions that I took the last time before touch and pen returned. Didn't work this time, tho.
I decided to do a system restore back at the point that I had used HP Advisor, since that was the last time I made note that pen and touch were working. Restore failed because a sfi.dat file was not found (and search didn't find it anywhere either). I tried 5 different restore points, before and after that one, and they all failed. But the first time around, I had touch on the logon screen, just not after windows started. The next time, I had touch but not pen. The next time, I had touch and pen, but only for a period of time (I think HP Advisor may have been the intervening event) before they stopped working.
Oh, and HP advisor does not appear to be actually installing the things on the action list. That could be an issue with Comodo, but it really looks more like an issue with that "mother may I" message from Windows asking for permission to run the program. Often as not, windows reports that the program is not responding. Closing the program with that dialog box actually gives it the kick in the knickers it needs to complete.
A not so great workaround is to use the mobility center to orient the screen when you want to put the thing in slate mode. You can pin it to the task bar (with a little fiddling). Touch is extremely slow to respond in slate mode. For example, it took about 3 minutes to get the screen oriented back around to notebook config, which is 4 "clicks" if things are working right. Pen works sort of OK (although I haven't tried any writing) . Gestures for scrolling do not work.
I am done with the troubleshooting until someone comes up with other targeted ideas.I have been keeping detailed chrono notes.
Again, I hope the information here leads to a solution. This unit is not a functional tablet and I don't want to stay with Vista, neither should I have to since this is supposed to be compatible.

New rMBP 13" - Trackpad/Keyboard not working during Win7 Bootcamp Installation

Hi,
I bought the new rMBP 13" 2 weeks ago and now wanted to install Win7 on an extra partition. Using the Bootcamp Assistant, I created a bootable USB drive to install. However, when booting the USB drive and getting to the first installation screen (asking for language), I don't have a cursors to select anything. Also the keyboard is not working. I thought the Win7 might lack some drivers, but I even a different Win7 distribution (64bit) but it still wasn't working. Does anyone have an idea what I could do to fix it? Obviously, not everyone has this issue.
Thanks!

Have you upgraded your EFI firmware -> http://support.apple.com/kb/DL1704?viewlocale=en_US&locale=en_US?
Clinton

Portege M750 tablet, buttons and fingerprint functions not working in win7

I have installed win7 64 bit ("fresh install" on my M750-129) and i have also downloaded and installed all the newest drivers from toshiba website.
the device manager shows no problem / drivers needed, and trhings like HDD protection work well.
However, i have four groups of problems i would love and appreciate to find answer:
1) when i change the screen position to tablet, it does not change the orientation nor the resolution.
There is no utility to set the desired orientations of screen as it was in vista (horribly unstable and slow OS, though).
This, naturally, is diminishing the usefullness of the tablet finction
2) the buttons do not work properly; the screen rotation button starts excel (!!) , the centre of mobility button starts word (!!), and the toshiba assistance button does not work at all
3) fingerprints: the fingerprint utility lets me to screen my fingerprint, asks if it should save it, and than says "saving impossible; another duplicate pattern exists" which i completely do not understand what it means...
4) some applications are not available at all after fresh install: face recognition, DVD player, bussines card screener - but i can love without those; 1-3 worries me much much more and i would appreciate any functional help. thanx on advance for any try!

hi,
helpful indeed - the installation of the tablet extension pack for vista , it helps to rotate when i switch for tablet even in win7 64 bit - thanxalot!
as for buttons, the first left ones still launch ms word and ms excel....
fingerprints: strangely enough, even if tghat was a clean installation, there were my old fingerprints (user "???") registered and it did not allow me to delete untill i found one little finger i did not register with viste BEFORE the CLEAN isnatallation with formatting the HD - is not that strange?
however, the buttons i hope will be ok once the drivers will be updated by toshibq for win7 64 bit, the main issues were solved for me - thank you once again!

U350 wireless not working on win7

Hello - I have a brand new U350 that came with Vista. First thing I did was clean install Win7 Home Premium and the network does not work, neither wired nor wireless.
So went to lenovo drivers download and isntalled
the Broadcom Ethernet Driver v12.2.4.2 dated 2009-10-21. This updated the two unknown devices noted in device manager for networks as these two:
- Broadcom NetLink (TM) Gigabit Ethernet
- Intel(R) WiFi Link 5100 AGN
So now the wired network is working but the wireless is still not. I have tried to make sure it is on doing the little slider on/off control and the Fn-F5 thing - but this does not do anything and the wireless light in the activity status lights by the touchpad does not turn on either.
So - I am not sure if the driver is wrong or what. THere are quite a number of Wireless drivers listed on the downlaod page at http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=61415.
Does anybody know if I installed the right driver, or if it is indeed one of the other drivers? Or some other problem?
Solved!
Go to Solution.

Installing the Lenovo Energy Management utility is required for the Wireless to be turned on. as soon as I installed it the Fn-F5 keypress brought up the user interface to turn the wireless funciton on/off. Evidently the Fn-F5 is enabled by or targeted to that UI.
Anybody reading the post I would not rule out the Intel driver download (as opposed to the older one on the Lenovo driver downloads web site) as required for the solution since I did successfully install it first. The version I installed is 13.0.0.107.

HP LJ 2015d driver not working in Win7

I have an HP Laser Jet 2015d with a duplex feature that is not recognized by the default Windows 7 driver. It indicates a manual process for duplex printing. I have the original disk, but it will not work in Windows 7. Tried to load the driver from HP, but can't determine the folder for the actual driver. Can anyone please help?

You may need to configure the driver so that it knows that a duplex unit is present on the device (assuming that one is present and physically working).
On the Printer properties dialogue, select the Device settings tab, and ensure that the duplex unit is set to Installed, rather than Not installed.

Flash Player not working in Win7 64bit machine

Greetings.
I have spent the past couple of weeks combing through first the help files, and then these forums looking at what should be the same problem I have. Even now up to the past couple of minutes it seems someone besides me is having this issue. I am wondering if I can get help here as most others have seemed to have gotten resolved.
I don't have Macfee, I am using MS Security Essentials, and Super Anit Spyware and Windows Firewall. With all of them disabled during the installtion the videos still fail. I've tried them on and off again and no help there. Shockwave works just fine but the flv files just don't go anywhere. I am not seeing any reference to flash video in Firefox, and I don't get the object in the addon listing in IE 8.
I tried the beta version for the 64bit and it didnt work either. Oddly, when I got this computer in November, I had flash all over the place. Cnet, Youtube, G4, MMORPG, you name it. All worked just great. Now I have black or white empty boxes and no videos.
It may seem like a long time before asking for help directly, but I am a tenacious bugger that likes to learn and exhaust all possiblities first. I also hoped my question would be answered in this forum as so many people seemingly had the same problem.
Please Help! I am at a loss at this point.
Thanks

I run with the 32 bit IE, according to the document pages in the Adobe instructions. It does not work. I moved over to the 64 bit version and tried the beta flash as well and that doesn't work either. Yes I get the window that says flash succesfully installed, with the version numbers below it. However, if I use the "open link in new tab" it does not show up, and the version window has the little x box in the upper right hand corner.
Files installed in the macromed flash folder are:
Flashplayer trust folder/ EACorTrust.cfg
Flash10l.ocx
FlashInstall
flashplayer.xpt
FlashUtil10l_ActiveX.dll
FlashUtil10l_ActiveX
FlashUtil10l_Plugin
install
NPSWF32.dll
Thank you for the prompt response.

Some devices in MBP are not working in win7 with bootcamp drivers

Hi.
I've just got my new mac book pro 15", with SSD 255 disk and hi-ress antiglare screen. I've used bootcamp to partition the disk and I've installed windows 7 64bit pro Greek.
The problem is that, after installing the bootcamp drivers, some hardware, do not work or recognized. eg, the trackpad, the keyboard, the wireless adapter, etc.
I've tried to install again and again from the disk, and make any internet updates, but, nothing happens. When I'm installing by single file in boot camp dvd, says, that the driver is not support the OS's language (greek).
Is there any suggestion for my problem? (In mac OS X there are no problems)

Hi!
Unpack the installer files. (I've used winrar for this.)
Find the DPInst.xml file, and open with Notepad.
Change the Australian language code to Greek (0x0408) here:




<language code="0x0C09">
<eula type="txt" path="EnglishLicense.txt"/>
</language>
Save the file, and run DPInst.exe
Have fun!

RRMX/SSO not working with Win7/GUI 7.2

Dear all,
I'm testing the useability of our BW system with new Windows 7 and SAP GUI version 7.2.
The only way of launching BEx analyzer is via RRMX or portal (using single sign-on) but this is not working. Once i trigger RRMX, Excel 2007 is opened (with Business Explorer Add-In) but when i try to open a query it opens the SAP Logon! The BEx version used is still the 3.5 (but we are in SAP BI 7.01).
Does anyone faced this problem? Do you know if there are specific settings for using SSO or RRMX with GUI 7.2/WINN 7?
Thanks for your help.
Best Regards,
Nuno

Hi Guys,
I have this issue also - I have used the above gui version and BW updates but still this does not work as such!
I donu2019t have the reg key values that are mentioned above but works internally but no over direct access?
We have windows 7 units connecting via a saprouter to a message server inturn connecting them to the application box.
I have tried to create the key manually but still no joy.
If go directly to the application server all works fine!
If I go via the saprouter and then to the application server u2013 again all works fine!
the error in the log sees an IP address ind=stead of the FQDN name
The fqdn name of the saprouter and then an IP address????? However this should be a FQDN name
So the error is something like /H/mysaprouter.co.uk/H/then the IP of application server
/H/mysaprouter.co.uk/H/10.10.10.2
There are no errors in the saprouter log file and nothing that I can see via the cisco firewall???
I can telent on all portsu20263225, 3205 3005
However please also note that this is not an issue when connecting internally via the saprouter, only an issue with Direct access (TCPIPv6)!
Io any of you have any ideas why this would return an IP address instead of FQDN name via the sap router.
This was working a few week oku2026u2026but something has changed and no one know what!
I would suggest firewall issues but I do get teh above errors when trying to connect either via exel or trying to connect backwords via the tc RRMX

Itunes 10.5.1 Completly not working in Win7 (64bit)

This has been a total disaster update for me. I am running Win7 (64bit) with all my windows updates current. I went ahead and updated Itunes to 10.5.1.
That was a severe mistake. Itunes crashes every time I start the program. I notice that genius is running right at the start up and I manage to shut it off but it still crashes.
So far I have done the following:
Started Itunes in safe mode----Crashes
Done a complete clean install and reinstall---Crashes
Downgraded to 10.5 clean install---Crashes
Upgraded back up to 10.5.1 started back in safe mode--Crashes.
I have stopped my anti-virus during all installs and starts and it still crashes.
My system is clean of viruses.
No error messages are provided for all the crashes other than "This program has stopped working"
My frustration is awful. I really hope they get this fixed or someone can offer a solution. I am so sorry I ran that upgrade.

After a day 1/2 of frustration and tears I got Itunes 10.5.1 working properly on my Win 7 64bit Home Edition.
I concluded that the profile, lets call it blue99 was in some way corrupted. The reason is that I followed the troubleshooting steps outlined here:
http://support.apple.com/kb/ts1717
Under the heading of Create a New User Account
I went ahead and created a new profile, lets call it B99. Under this new profile, I started up Itunes and sure enough it fired right up, Itunes store came up etc with no crashes. The strange part is that when it started up, the Itunes user agreement came up. In the other profile where Itunes would crash, after I would re-install, I NEVER GOT THE USER AGREEMENT. It would just go through an install, and when it would restart, it would immediately start to crash.
So now I concluded in agreement with the suport article that it was a "user-specific problem"
With this info, I took a gamble. I did not follow the "User specific Troubleshooting" offered in the article.
Instead I followed the directions found here:
http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile
I followed these very carefully. I copied all of my files found under C:\users\Old_Username folder, in this case that would have been the profile blue99. From there I copied the folders in there to the C:\users\New_Username folder in this case B99. The most important rule of thumb is MAKE SURE YOU HAVE FULL ADMINSTRATIVE PERMISSIONS BEFORE YOU START.
I then right clicked on the B99 folder and went to Properties and under the Security tab I gave the profile B99 full permissions. After this I went back to Control Panel and under User accounts I went and turned the B99 profile into full administrator and took the corrupted profile blue99 and switched it too Standard adminstration.
I restarted my computer and logged in under B99, started up Itunes and Yay!! Itunes is up and running. No crashes so far!! When I was running Itunes on the old profile I went ahead and turned off Genius and Home sharing. In this new profile I turned on Genius and it worked with no crashes. But I don't want to push my luck so I turned it off. Itunes has been running with no crashes. This is what worked for me, yeah its convuluted but I was desperate!! I don't even consider this a patch, so much as I cheated to get Itunes running.
If someone has a simpler way to get Itunes 10.5.01 to run, please let me know!!
Please note when I started this I had already reinstalled Itunes on the corrupted profile. I did not install Itunes again on the new profile. I just started it up.

Custom Dynamic Stamp Java not working in WIN7

I currently was upgraded from WinXP to WIN7. Running Acrobat Prof 8 with all the updates. I created a dozen customized dynamic stamps that grab info and date/time from the system. Using the following java, the stamps worked perfectly.
event.value = (new Date()).toString();
AFDate_FormatEx(",m/d/yy");
event.value = " " + (identity.name || identity.loginName) + " - " + event.value;
In WIN 7, I am getting a long date and time with no identity.
HELP
Ken Panthen
Albany, NY

GK,
I tried a completely new file from scratch, used your script and it did not pick up the user, it used a long date format, etc. Here is a sample of what I got. I only want the short date and name. No time zone. No name appears. It should be KPanthen.

Validity sensor/digital persona not working after win7 upgrade on dv3 2050ea

Hi,
I have recently clean installed windows 7 after Vista onto a dv3 2050ea laptop. I used the HP downloads page to get all the new drivers for win7 including the validity sensor and digital persona package. Win 7 does not find a biometric sensor and I can't see where to launch digital persona from . What can I do ?
thanks
Alan

I just fixed this problem with my HDX 18,,,,,,I will walk you through the process that fixed my FP reader.
I upgraded from VISTA to WIN7, that was where the problem occured.
My PC DL'd the the updated Digital Persona Identity Protection Suite (DPIPS) program for WIN7 from the HP site.
There is a known incompatibility with this update from HP and WIN7.
The Validity Sensor Driver that detects the FP reader is the same for VISTA and WIN7 in my PC (check this first / update IF necessary).
NEXT
I went through the: START>Control Panel>Programs and Features>Digital Persona>Uninstall.
Shut down and restart 2X.
I went back to the HP site and DL'd the DPIPS program for VISTA.
RUN > DPIPS program.
UPDATE from the DPIPS Program (Version 4.11.3826) bypassing the the update from HP.
Hope this works for you.
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos!

Pci-6602 VI can not work on win7

Hi
I have a vi output fix frequence through pci6602, it is can be worked on win xp and labview 8.5, but after upgrade to win7/labview 2013/Daqmax 9.7, these SubVis of 6602 are changed, so this Vi can not be worked. is there anyone can kindly help me? thanks
Best Regards
Rex
Solved!
Go to Solution.

Hi GerdW
thanks,
I have upload a atteched file, but I can not see it too. try again...
I think I know where is the problem, maybe it caused by TraditionalDAQ not installed.
but I have tried to rewrite a new vi output frequence through 6602 under DAQMAX, but not successed. do you have any example for me if possible.
Attachments:
pci-6602 Vi error.7z ‏1415 KB

HP 3420 not working in win7

Similar Messages

Maybe you are looking for