HP 4630 aio printer networking blue light

Is the blue networking light on the printer supposed to flash periodically?

foxfire43 wrote:
Is the blue networking light on the printer supposed to flash periodically?
Hi,
No, must be solid, flashing means no connection.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

LaserJet 3030 AIO print is too light on copies and print.

New HP toner and density set to the maximum of 5. Has worked great for five years and just recently began printing too light. All settings are fine and drivers and firmware up to date. Is this a fusing assembly issue? If it is, how difficult is it to reeplace the fuser?

Actually, I was able to make a copy from the originals by switching to black and white on my printer. But they still won't print from the computer saved docs.

AIO Remote app cant find HP 7150 aio printer on my wifi network, on Windows Phone 8

HI,
Yesterday I install You App AIO Remote on Windows Phone 8. I have connected to wifi HP 7150 aio printer, but phone cant find this printer... I have Lumia 1520 and Lumia 920 smartphones both is connect to this same wifi network like printer, but You app on both Lumias cant find printer, again but no problem is to connect to printer WEB interface from this both Lumias, so wifi network is correct configured.
I have two tablet more in this same wifi network, both with windows 8.1 x64 systems, on this, You Windows 8 modern App AIO Remote find this same printer without problem...
So what is wrong ? printer config ? eprint is on, ipp is on, bonjur is on, ip is static.
Please help Me becease I wait for this app and now i cant use them
Thanx
Peter

Hi Peter,
Welcome to the HP Support Forums. I understand that you are trying to use the new HP AiO Remote app for Windows phones to print to your Photosmart 7150 printer.
The Photosmart 7150 printer only supports USB connectivity, I have include the Photosmart 7150 Printer Specifications for reference. To be able to use the HP AiO Remote app the printer needs to be connected to a wireless network.
If you accidentally typed the incorrect printer model, please let me know which make/model/product number of HP printer that you have. How Do I Find My Model Number or Product Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Can a HP B210 AIO printer be connected to 2 different wireless networks at the same time?

I live in a household that has 2 different wireless networks in it (both me and my roommate have our own networks) and we just bought a new B210 series AIO printer. The printer detects both of our networks but only will print from one network at a time. If I want to print from my network I have to manually go to the wireless network wizard on the printer and select my network and re-enter my password. Is there any way that I can set up the printer to acknowledge both networks without having to constantly switch back and forth?

HI,
Sorry to say that what you want to do is not possible,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

OfficeJet 4630 Defaults to Network Fax when user has selected Network Printer Instead on WIN XP

Hi, just installed the OJ4630 and selected the "Network Printer" as the default. When choosing to print an MS Word document in "My Documents" the "Network Printer" correctly appears as the default. But when choosing to print a picture in "My Pictures" the "Network Fax" becomes the default, which is an error. Please advise, thanks!

Hi
Thanks for reporting the issue. Here is the way to fix it.
Go to windows->Control panel-> Printers and devices
Right click on the 4630 Fax Printer, select the option Set as default printer and you'll see two choices there: one is printer driver and other one is fax driver. You choose print driver to set as default.
Done
Hope it will help you.
happy Printing!!!
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

WRE54G Disconnects; Red Light Comes Back On Hours After Seeing 2 Blue Lights

Does anyone have a fix for this problem? My WRE54G shows 2 blue lights, works fine, but within a few hours it disconnects and one red light shows. This forces me to unplug and then plug back in the WRE54G, and reboot my computer.
What is causing this intermittant failure? How do I eliminate this?
Message Edited by buntaro on 04-09-200710:34 PM

Since I did not have any responses to my query, I engaged a Linksys tech in an email chat session last Friday afternoon to have a go at the problem. Essentially he walked me through the usual diagnostics, device firmware version levels, etc., and I would be happy to send you a copy of that session if you think it would be of help to you (just agree to ignore my typo's!).
For reference, I am running the following configuration:
- Two Dell PC's each running XP with all current patches applied.
- Full Linksys wireless network with their WRT54GL, V1.1 router, the WRE54G range expander, a WPSM5G USB print server (connected to a Brother MFC 820CW printer), and an SB5120 Motorola cable modem.
- All Linksys devices are at current firmware levels.
- Secured network (WPA-Personal):
After the chat session, I made the following changes:
- Re-installed the expander firmware...just in case (my idea).
- Found my remote PC set to work on wireless "B" or "G" and changed it to match my router on "G" only (this was my error as I intended to run "G" only throughout).
- Changed the router and expander from channel 6 to channel 11 (the tech recommended that I "try" channel 1 or 11).
So far (knock on wood), my expander has remained "on" (2 blue lights) even through a short commercial power failure this afternoon).
Hope this helps a bit...best of luck!

HP 6310 AIO Printer locks up and needs to be power-cycled when faxing from my PC.

I have an HP 6310 AIO Printer; Whenever I try to fax a document from my PC, the printer locks up (All lights flashing) and needs to be power-cycled. I can fax from the printer glass directly but unable to from my PC. Also the software communicates properly whenever I am scanning from the glass or feed tray. What would make it locks up and all light flashing? it seems as if whenever I generate the fax or scan from the PC end it locks up the printer.

Completely reload the full feature software and drivers for the printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HT1338 I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions?

I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions??

Okay. That is a good result. It proves you have a working network connection between the Mac and the Dell.
So with the printer not showing using Bonjour, you could try adding the printer manually. With Printers & Scanners open, click the plus button to add and then select the IP icon. You can then enter the IP address of the Dell. Set the protocol to HP Jetdirect-Socket. Leave the queue name blank. Change the Name from the IP address to Dell Wireless. Leave the Location blank and in the Use menu, select the model of Dell you have. Then click Add to complete the queue creation and then see if you can print.

HELP ME Please ! No Blue Lights on both of my WRTU54G-TM Routers behind a WRT54GX2 Router

I've had this configuration installed and working for the past two months as such:
Motorola Cable Modem - COX Cable ISP - 15Mbps down / 5Mbps up ; actual rated is higher on speedtest.net
Linksys Router - WRT54GX2 (I'll refer to this as main Router)
Linksys T-Mobile Router - WRTU54G-TM - with 2 SIM cards (this is VOIP router 2 for two lines)
Linksys T-Mobile Router - WRTU54G-TM - with 1 SIM card (this is VOIP router 1 for one line)
Network Topology:
Main Router:     192.168.2.1    router mode ; DHCP ON; Wireless ON - SSID: alpha
VOIP Router 2:  192.168.2.2   bridged mode; DHCP off; Wireless ON - SSID: beta
VOIP Router 1: 192.168.2.3   bridged mode; DHCP off: Wireless off
Both VOIP Routers connected from Internet Port on Router to LAN port on a 10/100 switch
All of this was working fine for the past two months, it even survived some Southern California power outages and came back with flying colors; UNTIL YESTERDAY...... VOIP Router 1 blue light ceased in the morning - Troubleshot it myself and then with tmobile/Linksys and verdict was a defective modem. VOIP Router 2 was still going strong UNTIL I decided to power cycle it to see if that would help with VOIP Router 1; well the blue lights never came back on; To make a long story short - after pulling my hair out and talking to tmobile/Linksys again; I was able to get the blue lights to come on both VOIP Router 1 and VOIP Router 2 if I connected one of them directly to the cable modem and the other VOIP Router  2 directly to VOIP Router 1.  I also did a hard reset on both VOIP routers back to factory defaults (did this before as well). Now, I can't even have a switch between VOIP ROUTER 1 and 2 and get a blue light on the second one. What in the world could be causing this, does anyone have a clue?
Now you may ask why do I need it setup like I had it originally, Cable Modem is downstairs ; Main Router downstairs was in place to isolate the Network from the VOIP Routers in case I needed to reboot the VOIP routers - which I had to do a few times in those two months. So I still had Internet access in the house when I rebooted the VOIP routers. I also wanted my phones upstairs, not downstairs and that is where the VOIP routers were situated.
I've searched thru this forum and googled elsewhere, but haven't found any solutions that work.
So can anybody help ????? TIA

OK, Here's an UPDATE, I believe that I have found a firmware bug in the WRTU54G-TM v1.00.21 code.
In order to get the blue lights on two WRTU54G-TM Routers, VPN - IPSEC passthru must be enabled on the 1st Router, or else the blue lights will not come on the 2nd Router.
fyi... I have 3 sim cards in the 2 Routers for 3 phone lines, 1 Sim card slot is empty.
I reset both WRTU54G-TM Routers to factory default and plugged one directly in to the cable modem and the second WRTU54G-TM into the first. I rebooted the cable modem and routers in order and in a few minutes, I had 3 blue lights for voice on the routers (YES!). Ok, so now I tried reconfiguring the Routers the way I want them. I only need wireless on one of them, not both, so I turn off the wireless on the first router, I also disable all 3 VPN passthrough options on both routers and disable the firewall on the 2nd router. Now I lose the blue lights on the 2nd Router. Well after some troubleshooting, I have found that the IPSEC VPN passthru option MUST be enabled on the 1st Router to get the blue lights on the 2nd Router. I have reproduced this very easily by disabling the IPSEC on the first Router and the blue lights will go off on the 2nd Router - I have to re-enable the IPSEC on the 1st router and reboot the 2nd Router for the blue lights to come back on the 2nd Router.
Thanks, Tom
(Mod note: Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 09-16-2009 01:08 PM

No network card lights fron or back OUT

I cant connect wired or wirelss It was working but now it doesnt, Been messing with it for hours. The wireless light on the front is out. And the Led on the network card is out even when connected with a cat 5. I tried serveal cables.

Hi , Welcome to the HP Forums! I see that the network card lights on front or back of your HP Laserjet 1525nw are out. I am happy to help! Are you able to print a configuration report? Printing a Configuration Report. In the meantime, please take a look through this guide, Setting Up the Printer for a Wired or Wireless Network for the HP LaserJet Pro CP1525n and CP1525nw Color Printers. I would also take a look at page 36. of your printer's user guide. Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

WRE54G after reset only 1 blue light, no activity light

I have spent a lot of frustrating hours trying to setup my newly bought expander WRE54G.
Issues:
1. I could not find my expander by typing 192.168.1.240
2. So, I tried one of the reset tips I found here, by holding the reset button for 30 seconds, unplug it while pressing down reset, wait 15 secs, while holding reset and turn on power again, and then wait further 10 seconds.
3. After having tried this, when I turn it on, there is only one blue light on the link button, no light on the activity, and I could not see my expander at all on the wifi network. (A normal reset would give me a red light on the link & a blue flashing light on the activity, and I was able to see my expander on the network)
Is there any way to undo what I did with the reset tip? I really want to restore it to factory defaults.
My WRE54G does not say whether it is V1 or V2, so I guess it is V1?
Anyone please help!!!

Did you ever get this issue resolved? I am having the same issue.
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 09-18-2007 10:43 AM

WRTU54G-TM try this to fix blue light problems, dropping service and disconnects

I spent a ton of time on the phone with T-Mobile, Linksys and the internet company to solve the problem of the router kicking off frequently.
The last suggestions, which has worked so far is to log into your router. Change the MTU from automatic to manual and then type in 1450. Save and it will reboot. Wait until your back online and you should have NO problems. Linksys says this is the workaround until tmobile releases the ok on new firmware.
if its blinking blue either call tmobile and have them deactivate the voicemail on that line or you need to set it up.
Good luck.

Hi,
I just started the t-Mobile @ Home service with the WRTU54G-TM router this weekend and had all sorts of issues with the router rebooting and dropping the blue-light.
I have AT&T DSL with a 5100 Speedstream modem. Before getting the Linksys router, I had a 5 year old Netgear wireless router that had a rock solid internet connection - only dropped it 3 times over a 5 year period.
After having a full day off issues with the t-Mobile Linksys router, I decided to try reconfiguring my network so I had the Netgear router in between the Linksys and the modem.
I downloaded the latest set-up wizard from Linksys and ran it (and followed the instructions to the "t"), and chose the option to keep my existing network (with the netgear router) and add the t-Mobile Linksys router to the existing network. Since the Linksys has better wireless and security features than the old Netgear router, I still have all my wireless traffic going through the Linksys (I turned off the wireless features of the Netgear router). All the Netgear router is doing is keeping the internet connection alive.
So far (it's only been one day), I've seen a dramatic improvement - haven't lost the blue light once and everything seems to be running fine. If you had an existing router that worked will prior to adding the T-mobile one, I would encourage you to try this set-up, since it has worked very well for me.

HH3 Broadband blue light not working with Power Sa...

Had a BT engineer here today to do a line check and DLM reset when he noticed the blue lights were out, so I told him they were disabled in the powersave mode via the HH Manager at that time.It wasn't till he'd gone I realised he meant the Broadband light was out, which I simply hadn't noticed.This got me wondering if my fairly recent speed problems could be related with drop offs and such, but the engineer didn't persue the blue light issue earlier.
I rang BT to enquire about a replacement HH3, and was quoted £10 with £6 postage, because the warranty had run out on the hub, as well as me being out of contract.
It sounds about right but can anyone here confirm please?

Also - I need to add that the printer is sitting about an inch away from the Mac.

HP AiO Printer Remote

When running HPAiO Printer Remote, if I click on "Set Preferences" I'm told....Your printer settings are password protected. use your printer control panel to change setting. How do I do this? The control panel display only shows....
Control panel display: Indicates the number of copies, media error, and wireless signal strength.

Hi,
For Windows 8.1, your printer has proper Software and drivers which come with the CD, why you need to use HP AiO printer remote ? And you can only set few things: Country, Language and Auto turn off after a period. All main Preferences should be done on software and drivers on your computer not AiO Remote app.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP 3540 AIO Printer DOESN'T PRINT BLACK TEXT!

I unfortunately have an HP AIO Printer Deskjet 3540 Series.
Upon haggling wiht the abject customer tech support for an hour, he asks me to re-install the driver. After doing so, the black text JUST DOESN'T PRINT!
Is this some kind of joke! I am going to run out of colored ink in printng the **bleep** test pages.
It's an absolute rip-off. No wonder people buy cheap cartridges.

Hi @GaurangDivecha
Although I would be happy to offer you some troubleshooting steps, I think it might be best to call HP.
You are welcome to take a look at the following document to ensure you have done all the necessary troubleshooting; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP ENVY 4500 and Deskjet In...
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
I hope this helps.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP 4630 aio printer networking blue light

Similar Messages

Maybe you are looking for