WRE54G Disconnects; Red Light Comes Back On Hours After Seeing 2 Blue Lights
Does anyone have a fix for this problem? My WRE54G shows 2 blue lights, works fine, but within a few hours it disconnects and one red light shows. This forces me to unplug and then plug back in the WRE54G, and reboot my computer.
What is causing this intermittant failure? How do I eliminate this?
Message Edited by buntaro on 04-09-200710:34 PM
Since I did not have any responses to my query, I engaged a Linksys tech in an email chat session last Friday afternoon to have a go at the problem. Essentially he walked me through the usual diagnostics, device firmware version levels, etc., and I would be happy to send you a copy of that session if you think it would be of help to you (just agree to ignore my typo's!).
For reference, I am running the following configuration:
- Two Dell PC's each running XP with all current patches applied.
- Full Linksys wireless network with their WRT54GL, V1.1 router, the WRE54G range expander, a WPSM5G USB print server (connected to a Brother MFC 820CW printer), and an SB5120 Motorola cable modem.
- All Linksys devices are at current firmware levels.
- Secured network (WPA-Personal):
After the chat session, I made the following changes:
- Re-installed the expander firmware...just in case (my idea).
- Found my remote PC set to work on wireless "B" or "G" and changed it to match my router on "G" only (this was my error as I intended to run "G" only throughout).
- Changed the router and expander from channel 6 to channel 11 (the tech recommended that I "try" channel 1 or 11).
So far (knock on wood), my expander has remained "on" (2 blue lights) even through a short commercial power failure this afternoon).
Hope this helps a bit...best of luck!
Similar Messages
-
USB mouse disconnects randomly, sometimes comes back
ive been having a reoccuring problem with my logitech mouse disconnecting and reconnecting. as of lately it just disconnects and wont come back untill i unplug and replug it in, then it will work for a few more days. whats intresting is say the mouse disconnects...i can unplug my ipod cable (not attached to ipod) and plug that back in, and the mouse will reconnect. the computer is in a recording studio, it has a firewire audio interface connected, the mouse and keyboard going to seperate usb slots, an ilok, and my ipod cable. its a macpro 3.1 running 10.6.8 any thoughts?
Time to take it back in for repairs.
-
Console does not comes back to life after screen blanking
edited post on 2014-07-13:
This problem has nothing to do with suspend-to-RAM and/or suspend-to-disk (hibernate).
It is a screen blanking on the console triggered by a timeout in the kernel.
It can be modified (or disabled) with the setterm command for the current session.
The issue is still unresolved since the console doesn't comes back to life after hitting a key.
See post#6 on 2014-07-13 for further details.
Changed title accordingly.
original post on 2014-07-09 titled "blank screen on resume after suspend but screen OK after hibernation" follows:
Dell Inspiron 9400 (aka E1705) with Radeon X1400 (RV515) (confirmed by dmesg: loading R500 microcode)
- arch x86_64 fully updated up to 07-JULY-2014
- xf86-video-ati open source driver installed
- no (additional; ie: explicitly) installed power management packages such as pm-utils
- no X installed
The problem:
• hibernation works fine; ie: by closing (and waiting a few seconds) and re-opening the lid
• however resume after suspend isn't working; ie: by pressing any key to resume ... it seems the screen never comes back to life
After suspend activates (and after I hit a key to activate resume) I see no activity at all (blank screen) but ... if I type some commands (eg: timedatectl etc) and then I close the lid to activate the hibernation sequence re-opening the lid (say, a minute later) the machine comes back from hibernation as expected and I can see the commands (and output) I typed when the screen was blank so ... it seems to me either:
• the backlight state is not restored on the resume sequence (first thought)
• the machine shuts down the screen after (a 10 minute) timeout but never activates the suspend sequence (and will never activate resume then) (second thought while reading dmesg output)
This problem was present on this laptop since my first (and subsequent) arch installations so it seems is not kernel/driver specific since I did many pacman --sysupgrades in between while learning arch.
The testing sequence (with related entries on included dmesg output):
- typed timedatectl ... showing 23.29.04
- now allowing idle time for the machine to suspend
- suspend starts at 23.39 (ie: after 10 minutes) ... tag it as event1#1
- after 30 seconds resuming with the space key and after a few seconds typing (blindly) timedatectl ... tag it as event1#2
- after 60 seconds closing the lid allowing time for hibernation ... tag it as event2#1
- after 30 seconds opening the lid ... tag it as event2#2
- now I can see the output for timedatectl (typed blindly on event1#2) and it shows 23.40.11
As you can see in attached dmesg output (at the bottom of this post) there are (to me) no evident entries for event1#2 (resuming after suspend):
... event#1-1 ... suspend starts here:
[Mon Jul 7 23:40:12 2014] perf interrupt took too long (2504 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
... event#1-2 ... resume from suspend should show some entries here:
no entries at all
And the next entry after entering the suspend sequence is the starting of the hibernation sequence (when closing the lid):
... event#2-1 ... hibernation starts here:
[Mon Jul 7 23:41:30 2014] PM: Syncing filesystems ... done.
[Mon Jul 7 23:41:30 2014] smpboot: CPU 1 is now offline
... event#2-2 ... coming back from hibernation (I think) starts here:
[Mon Jul 7 23:41:30 2014] ACPI: Low-level resume complete
[Mon Jul 7 23:41:31 2014] Restarting tasks ... done.
[Mon Jul 7 23:41:31 2014] video LNXVIDEO:00: Restoring backlight state
So the machine shuts off the screen (and/or backlight) but never enters suspend mode because "restoring backlight state" appears once and should appear twice in my testing.
Why isn't working then ?
Because the signal to enter suspend mode is never sent/received by the OS ?
Which brings me to a key question: is the acpi package (which it is not installed) (or something like that) required for such signaling ?
In the following post a user claims a similar problem but he can see some activity (after resuming from suspend) by directing a bright light to the screen so the problem there seems to be the backlight not powered up again: it is not my case, when I did the same I saw no activity at all.
https://bbs.archlinux.org/viewtopic.php?id=183580
Following is full dmesg output (edited with a couple of lines inserted to keep track of mentioned events):
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuset
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpu
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys cpuacct
[Mon Jul 7 22:52:56 2014] Linux version 3.15.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jul 1 07:32:45 CEST 2014
[Mon Jul 7 22:52:56 2014] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
[Mon Jul 7 22:52:56 2014] e820: BIOS-provided physical RAM map:
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x0000000000100000-0x000000007fed33ff] usable
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x000000007fed3400-0x000000007fffffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f0000000-0x00000000f4006fff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000f4008000-0x00000000f400bfff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[Mon Jul 7 22:52:56 2014] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[Mon Jul 7 22:52:56 2014] NX (Execute Disable) protection: active
[Mon Jul 7 22:52:56 2014] SMBIOS 2.4 present.
[Mon Jul 7 22:52:56 2014] DMI: Dell Inc. MP061 /0YD479, BIOS A10 08/26/2009
[Mon Jul 7 22:52:56 2014] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[Mon Jul 7 22:52:56 2014] e820: remove [mem 0x000a0000-0x000fffff] usable
[Mon Jul 7 22:52:56 2014] No AGP bridge found
[Mon Jul 7 22:52:56 2014] e820: last_pfn = 0x7fed3 max_arch_pfn = 0x400000000
[Mon Jul 7 22:52:56 2014] MTRR default type: uncachable
[Mon Jul 7 22:52:56 2014] MTRR fixed ranges enabled:
[Mon Jul 7 22:52:56 2014] 00000-9FFFF write-back
[Mon Jul 7 22:52:56 2014] A0000-BFFFF uncachable
[Mon Jul 7 22:52:56 2014] C0000-CFFFF write-protect
[Mon Jul 7 22:52:56 2014] D0000-EFFFF uncachable
[Mon Jul 7 22:52:56 2014] F0000-FFFFF write-protect
[Mon Jul 7 22:52:56 2014] MTRR variable ranges enabled:
[Mon Jul 7 22:52:56 2014] 0 base 000000000 mask F80000000 write-back
[Mon Jul 7 22:52:56 2014] 1 base 07FF00000 mask FFFF00000 uncachable
[Mon Jul 7 22:52:56 2014] 2 disabled
[Mon Jul 7 22:52:56 2014] 3 disabled
[Mon Jul 7 22:52:56 2014] 4 disabled
[Mon Jul 7 22:52:56 2014] 5 disabled
[Mon Jul 7 22:52:56 2014] 6 disabled
[Mon Jul 7 22:52:56 2014] 7 disabled
[Mon Jul 7 22:52:56 2014] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[Mon Jul 7 22:52:56 2014] Scanning 1 areas for low memory corruption
[Mon Jul 7 22:52:56 2014] Base memory trampoline at [ffff880000099000] 99000 size 24576
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00000000-0x000fffff]
[Mon Jul 7 22:52:56 2014] [mem 0x00000000-0x000fffff] page 4k
[Mon Jul 7 22:52:56 2014] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[Mon Jul 7 22:52:56 2014] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[Mon Jul 7 22:52:56 2014] BRK [0x01b40000, 0x01b40fff] PGTABLE
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[Mon Jul 7 22:52:56 2014] [mem 0x7fc00000-0x7fdfffff] page 2M
[Mon Jul 7 22:52:56 2014] BRK [0x01b41000, 0x01b41fff] PGTABLE
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[Mon Jul 7 22:52:56 2014] [mem 0x7c000000-0x7fbfffff] page 2M
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[Mon Jul 7 22:52:56 2014] [mem 0x00100000-0x001fffff] page 4k
[Mon Jul 7 22:52:56 2014] [mem 0x00200000-0x7bffffff] page 2M
[Mon Jul 7 22:52:56 2014] init_memory_mapping: [mem 0x7fe00000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] [mem 0x7fe00000-0x7fed2fff] page 4k
[Mon Jul 7 22:52:56 2014] BRK [0x01b42000, 0x01b42fff] PGTABLE
[Mon Jul 7 22:52:56 2014] RAMDISK: [mem 0x3729a000-0x37944fff]
[Mon Jul 7 22:52:56 2014] ACPI: RSDP 0x00000000000FC1B0 000014 (v00 DELL )
[Mon Jul 7 22:52:56 2014] ACPI: RSDT 0x000000007FED39CD 000040 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: FACP 0x000000007FED4800 000074 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: DSDT 0x000000007FED5400 004841 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: FACS 0x000000007FEE3C00 000040
[Mon Jul 7 22:52:56 2014] ACPI: HPET 0x000000007FED4F00 000038 (v01 DELL M07 00000001 ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: APIC 0x000000007FED5000 000068 (v01 DELL M07 27D9081A ASL 00000047)
[Mon Jul 7 22:52:56 2014] ACPI: MCFG 0x000000007FED4FC0 00003E (v16 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: SLIC 0x000000007FED509C 000176 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: BOOT 0x000000007FED4BC0 000028 (v01 DELL M07 27D9081A ASL 00000061)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3A0D 0004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
[Mon Jul 7 22:52:56 2014] No NUMA configuration found
[Mon Jul 7 22:52:56 2014] Faking a node at [mem 0x0000000000000000-0x000000007fed2fff]
[Mon Jul 7 22:52:56 2014] Initmem setup node 0 [mem 0x00000000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] NODE_DATA [mem 0x7fece000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[Mon Jul 7 22:52:56 2014] Zone ranges:
[Mon Jul 7 22:52:56 2014] DMA [mem 0x00001000-0x00ffffff]
[Mon Jul 7 22:52:56 2014] DMA32 [mem 0x01000000-0xffffffff]
[Mon Jul 7 22:52:56 2014] Normal empty
[Mon Jul 7 22:52:56 2014] Movable zone start for each node
[Mon Jul 7 22:52:56 2014] Early memory node ranges
[Mon Jul 7 22:52:56 2014] node 0: [mem 0x00001000-0x0009efff]
[Mon Jul 7 22:52:56 2014] node 0: [mem 0x00100000-0x7fed2fff]
[Mon Jul 7 22:52:56 2014] On node 0 totalpages: 523889
[Mon Jul 7 22:52:56 2014] DMA zone: 64 pages used for memmap
[Mon Jul 7 22:52:56 2014] DMA zone: 21 pages reserved
[Mon Jul 7 22:52:56 2014] DMA zone: 3998 pages, LIFO batch:0
[Mon Jul 7 22:52:56 2014] DMA32 zone: 8124 pages used for memmap
[Mon Jul 7 22:52:56 2014] DMA32 zone: 519891 pages, LIFO batch:31
[Mon Jul 7 22:52:56 2014] ACPI: PM-Timer IO Port: 0x1008
[Mon Jul 7 22:52:56 2014] ACPI: Local APIC address 0xfee00000
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[Mon Jul 7 22:52:56 2014] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[Mon Jul 7 22:52:56 2014] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[Mon Jul 7 22:52:56 2014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[Mon Jul 7 22:52:56 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[Mon Jul 7 22:52:56 2014] ACPI: IRQ0 used by override.
[Mon Jul 7 22:52:56 2014] ACPI: IRQ2 used by override.
[Mon Jul 7 22:52:56 2014] ACPI: IRQ9 used by override.
[Mon Jul 7 22:52:56 2014] Using ACPI (MADT) for SMP configuration information
[Mon Jul 7 22:52:56 2014] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[Mon Jul 7 22:52:56 2014] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[Mon Jul 7 22:52:56 2014] nr_irqs_gsi: 40
[Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[Mon Jul 7 22:52:56 2014] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[Mon Jul 7 22:52:56 2014] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[Mon Jul 7 22:52:56 2014] Booting paravirtualized kernel on bare hardware
[Mon Jul 7 22:52:56 2014] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[Mon Jul 7 22:52:56 2014] PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s87168 r8192 d23424 u1048576
[Mon Jul 7 22:52:56 2014] pcpu-alloc: s87168 r8192 d23424 u1048576 alloc=1*2097152
[Mon Jul 7 22:52:56 2014] pcpu-alloc: [0] 0 1
[Mon Jul 7 22:52:56 2014] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515680
[Mon Jul 7 22:52:56 2014] Policy zone: DMA32
[Mon Jul 7 22:52:56 2014] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2918bbe1-e489-42fb-ad36-d70217125c5a rw quiet
[Mon Jul 7 22:52:56 2014] PID hash table entries: 4096 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] Checking aperture...
[Mon Jul 7 22:52:56 2014] No AGP bridge found
[Mon Jul 7 22:52:56 2014] Calgary: detecting Calgary via BIOS EBDA area
[Mon Jul 7 22:52:56 2014] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[Mon Jul 7 22:52:56 2014] Memory: 2043836K/2095556K available (5224K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 51720K reserved)
[Mon Jul 7 22:52:56 2014] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[Mon Jul 7 22:52:56 2014] Preemptible hierarchical RCU implementation.
[Mon Jul 7 22:52:56 2014] RCU dyntick-idle grace-period acceleration is enabled.
[Mon Jul 7 22:52:56 2014] Dump stacks of tasks blocking RCU-preempt GP.
[Mon Jul 7 22:52:56 2014] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[Mon Jul 7 22:52:56 2014] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[Mon Jul 7 22:52:56 2014] NR_IRQS:8448 nr_irqs:512 16
[Mon Jul 7 22:52:56 2014] Console: colour dummy device 80x25
[Mon Jul 7 22:52:56 2014] console [tty0] enabled
[Mon Jul 7 22:52:56 2014] allocated 8388608 bytes of page_cgroup
[Mon Jul 7 22:52:56 2014] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[Mon Jul 7 22:52:56 2014] hpet clockevent registered
[Mon Jul 7 22:52:56 2014] tsc: Fast TSC calibration using PIT
[Mon Jul 7 22:52:56 2014] tsc: Detected 1997.384 MHz processor
[Mon Jul 7 22:52:56 2014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3996.21 BogoMIPS (lpj=6657946)
[Mon Jul 7 22:52:56 2014] pid_max: default: 32768 minimum: 301
[Mon Jul 7 22:52:56 2014] ACPI: Core revision 20140214
[Mon Jul 7 22:52:56 2014] ACPI: All ACPI Tables successfully acquired
[Mon Jul 7 22:52:56 2014] Security Framework initialized
[Mon Jul 7 22:52:56 2014] Yama: becoming mindful.
[Mon Jul 7 22:52:56 2014] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[Mon Jul 7 22:52:56 2014] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[Mon Jul 7 22:52:56 2014] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys memory
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys devices
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys freezer
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys net_cls
[Mon Jul 7 22:52:56 2014] Initializing cgroup subsys blkio
[Mon Jul 7 22:52:56 2014] CPU: Physical Processor ID: 0
[Mon Jul 7 22:52:56 2014] CPU: Processor Core ID: 0
[Mon Jul 7 22:52:56 2014] mce: CPU supports 6 MCE banks
[Mon Jul 7 22:52:56 2014] CPU0: Thermal monitoring enabled (TM2)
[Mon Jul 7 22:52:56 2014] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[Mon Jul 7 22:52:56 2014] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[Mon Jul 7 22:52:56 2014] ftrace: allocating 20226 entries in 80 pages
[Mon Jul 7 22:52:56 2014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[Mon Jul 7 22:52:56 2014] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (fam: 06, model: 0f, stepping: 06)
[Mon Jul 7 22:52:56 2014] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[Mon Jul 7 22:52:56 2014] perf_event_intel: PEBS disabled due to CPU errata
[Mon Jul 7 22:52:56 2014] ... version: 2
[Mon Jul 7 22:52:56 2014] ... bit width: 40
[Mon Jul 7 22:52:56 2014] ... generic registers: 2
[Mon Jul 7 22:52:56 2014] ... value mask: 000000ffffffffff
[Mon Jul 7 22:52:56 2014] ... max period: 000000007fffffff
[Mon Jul 7 22:52:56 2014] ... fixed-purpose events: 3
[Mon Jul 7 22:52:56 2014] ... event mask: 0000000700000003
[Mon Jul 7 22:52:56 2014] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[Mon Jul 7 22:52:56 2014] x86: Booting SMP configuration:
[Mon Jul 7 22:52:56 2014] .... node #0, CPUs: #1
[Mon Jul 7 22:52:56 2014] TSC synchronization [CPU#0 -> CPU#1]:
[Mon Jul 7 22:52:56 2014] Measured 3679205328 cycles TSC warp between CPUs, turning off TSC clock.
[Mon Jul 7 22:52:56 2014] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[Mon Jul 7 22:52:56 2014] x86: Booted up 1 node, 2 CPUs
[Mon Jul 7 22:52:56 2014] smpboot: Total of 2 processors activated (7992.43 BogoMIPS)
[Mon Jul 7 22:52:56 2014] devtmpfs: initialized
[Mon Jul 7 22:52:56 2014] pinctrl core: initialized pinctrl subsystem
[Mon Jul 7 22:52:56 2014] RTC time: 1:53:00, date: 07/08/14
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 16
[Mon Jul 7 22:52:56 2014] cpuidle: using governor ladder
[Mon Jul 7 22:52:56 2014] cpuidle: using governor menu
[Mon Jul 7 22:52:56 2014] ACPI: bus type PCI registered
[Mon Jul 7 22:52:56 2014] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[Mon Jul 7 22:52:56 2014] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[Mon Jul 7 22:52:56 2014] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[Mon Jul 7 22:52:56 2014] PCI: Using configuration type 1 for base access
[Mon Jul 7 22:52:56 2014] dmi type 0xB1 record - unknown flag
[Mon Jul 7 22:52:56 2014] mtrr: your CPUs had inconsistent variable MTRR settings
[Mon Jul 7 22:52:56 2014] mtrr: probably your BIOS does not setup all CPUs.
[Mon Jul 7 22:52:56 2014] mtrr: corrected configuration.
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Module Device)
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Device)
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(3.0 _SCP Extensions)
[Mon Jul 7 22:52:56 2014] ACPI: Added _OSI(Processor Aggregator Device)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4134 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED3EE9 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED4378 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x000000007FED40AF 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Dynamic OEM Table Load:
[Mon Jul 7 22:52:56 2014] ACPI: SSDT 0x0000000000000000 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[Mon Jul 7 22:52:56 2014] ACPI: Interpreter enabled
[Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[Mon Jul 7 22:52:56 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[Mon Jul 7 22:52:56 2014] ACPI: (supports S0 S3 S4 S5)
[Mon Jul 7 22:52:56 2014] ACPI: Using IOAPIC for interrupt routing
[Mon Jul 7 22:52:56 2014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Mon Jul 7 22:52:56 2014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[Mon Jul 7 22:52:56 2014] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[Mon Jul 7 22:52:56 2014] PCI host bridge to bus 0000:00
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [bus 00-ff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf4007000-0xf4007fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xf400c000-0xfebfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfed00400-0xfed1ffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xffafffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: reg 0x10: [mem 0xefffc000-0xefffffff 64bit]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1b.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.1: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.2: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.3: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80000-0xffa803ff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1d.7: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: System wakeup disabled by ACPI
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: reg 0x20: [io 0xbfa0-0xbfaf]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.2: PME# supported from D3hot
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: [1002:7145] type 00 class 0x030000
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x14: [io 0xee00-0xeeff]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x18: [mem 0xefdf0000-0xefdfffff]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: supports D1 D2
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[Mon Jul 7 22:52:56 2014] acpiphp: Slot [1] registered
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: [14e4:170c] type 00 class 0x020000
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: reg 0x10: [mem 0xef9fe000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: supports D1 D2
[Mon Jul 7 22:52:56 2014] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf4007000-0xf4007fff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xf400c000-0xfebfffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfed00400-0xfed1ffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xffafffff] (subtractive decode)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[Mon Jul 7 22:52:56 2014] ACPI: Enabled 3 GPEs in block 00 to 1F
[Mon Jul 7 22:52:56 2014] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[Mon Jul 7 22:52:56 2014] vgaarb: loaded
[Mon Jul 7 22:52:56 2014] vgaarb: bridge control possible 0000:01:00.0
[Mon Jul 7 22:52:56 2014] PCI: Using ACPI for IRQ routing
[Mon Jul 7 22:52:56 2014] PCI: pci_cache_line_size set to 64 bytes
[Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[Mon Jul 7 22:52:56 2014] e820: reserve RAM buffer [mem 0x7fed3400-0x7fffffff]
[Mon Jul 7 22:52:56 2014] NetLabel: Initializing
[Mon Jul 7 22:52:56 2014] NetLabel: domain hash size = 128
[Mon Jul 7 22:52:56 2014] NetLabel: protocols = UNLABELED CIPSOv4
[Mon Jul 7 22:52:56 2014] NetLabel: unlabeled traffic allowed by default
[Mon Jul 7 22:52:56 2014] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[Mon Jul 7 22:52:56 2014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[Mon Jul 7 22:52:56 2014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[Mon Jul 7 22:52:56 2014] Switched to clocksource hpet
[Mon Jul 7 22:52:56 2014] pnp: PnP ACPI init
[Mon Jul 7 22:52:56 2014] ACPI: bus type PNP registered
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x00100000-0x7fed33ff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7fed3400-0x7fefffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0x7ff00000-0x7fffffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] system 00:01: [io 0x04d0-0x04d1] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] pnp 00:02: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0xf400-0xf4fe] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0x1080-0x10bf] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0x10c0-0x10df] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: [io 0x0809] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0c80-0x0cff] could not be reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0910-0x091f] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0920-0x092f] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0cb0-0x0cbf] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: [io 0x0930-0x097f] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:08: [dma 4]
[Mon Jul 7 22:52:56 2014] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
[Mon Jul 7 22:52:56 2014] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[Mon Jul 7 22:52:56 2014] system 00:0a: [mem 0xfed00000-0xfed003ff] has been reserved
[Mon Jul 7 22:52:56 2014] system 00:0a: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[Mon Jul 7 22:52:56 2014] pnp: PnP ACPI: found 11 devices
[Mon Jul 7 22:52:56 2014] ACPI: bus type PNP unregistered
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: PCI bridge to [bus 01]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: PCI bridge to [bus 0c-0d]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xefa00000-0xefcfffff]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: PCI bridge to [bus 03]
[Mon Jul 7 22:52:56 2014] pci 0000:00:1e.0: bridge window [mem 0xef900000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 8 [mem 0x80000000-0xefffffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 9 [mem 0xf4007000-0xf4007fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 10 [mem 0xf400c000-0xfebfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 11 [mem 0xfec10000-0xfecfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 12 [mem 0xfed00400-0xfed1ffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:00: resource 13 [mem 0xfee10000-0xffafffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 1 [mem 0xefd00000-0xefefffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 1 [mem 0xefa00000-0xefcfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:0c: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 1 [mem 0xef900000-0xef9fffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 8 [mem 0x80000000-0xefffffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 9 [mem 0xf4007000-0xf4007fff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 10 [mem 0xf400c000-0xfebfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 11 [mem 0xfec10000-0xfecfffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 12 [mem 0xfed00400-0xfed1ffff]
[Mon Jul 7 22:52:56 2014] pci_bus 0000:03: resource 13 [mem 0xfee10000-0xffafffff]
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 2
[Mon Jul 7 22:52:56 2014] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[Mon Jul 7 22:52:56 2014] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[Mon Jul 7 22:52:56 2014] TCP: Hash tables configured (established 16384 bind 16384)
[Mon Jul 7 22:52:56 2014] TCP: reno registered
[Mon Jul 7 22:52:56 2014] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 1
[Mon Jul 7 22:52:56 2014] pci 0000:01:00.0: Boot video device
[Mon Jul 7 22:52:56 2014] PCI: CLS 64 bytes, default 64
[Mon Jul 7 22:52:56 2014] Unpacking initramfs...
[Mon Jul 7 22:52:56 2014] Freeing initrd memory: 6828K (ffff88003729a000 - ffff880037945000)
[Mon Jul 7 22:52:56 2014] Simple Boot Flag at 0x79 set to 0x1
[Mon Jul 7 22:52:56 2014] Scanning for low memory corruption every 60 seconds
[Mon Jul 7 22:52:56 2014] futex hash table entries: 512 (order: 3, 32768 bytes)
[Mon Jul 7 22:52:56 2014] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[Mon Jul 7 22:52:56 2014] zbud: loaded
[Mon Jul 7 22:52:56 2014] VFS: Disk quotas dquot_6.5.2
[Mon Jul 7 22:52:56 2014] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[Mon Jul 7 22:52:56 2014] msgmni has been set to 4005
[Mon Jul 7 22:52:56 2014] Key type big_key registered
[Mon Jul 7 22:52:56 2014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[Mon Jul 7 22:52:56 2014] io scheduler noop registered
[Mon Jul 7 22:52:56 2014] io scheduler deadline registered
[Mon Jul 7 22:52:56 2014] io scheduler cfq registered (default)
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: device [8086:27a1] has invalid IRQ; check vendor BIOS
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: device [8086:27d0] has invalid IRQ; check vendor BIOS
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: device [8086:27d6] has invalid IRQ; check vendor BIOS
[Mon Jul 7 22:52:56 2014] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[Mon Jul 7 22:52:56 2014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[Mon Jul 7 22:52:56 2014] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[Mon Jul 7 22:52:56 2014] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
[Mon Jul 7 22:52:56 2014] vesafb: scrolling: redraw
[Mon Jul 7 22:52:56 2014] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[Mon Jul 7 22:52:56 2014] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004400000, using 7552k, total 7552k
[Mon Jul 7 22:52:56 2014] Console: switching to colour frame buffer device 200x75
[Mon Jul 7 22:52:56 2014] fb0: VESA VGA frame buffer device
[Mon Jul 7 22:52:56 2014] intel_idle: does not run on family 6 model 15
[Mon Jul 7 22:52:56 2014] GHES: HEST is not enabled!
[Mon Jul 7 22:52:56 2014] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[Mon Jul 7 22:52:56 2014] Linux agpgart interface v0.103
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: RTC can wake from S4
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[Mon Jul 7 22:52:56 2014] ledtrig-cpu: registered to indicate activity on CPUs
[Mon Jul 7 22:52:56 2014] TCP: cubic registered
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 10
[Mon Jul 7 22:52:56 2014] NET: Registered protocol family 17
[Mon Jul 7 22:52:56 2014] registered taskstats version 1
[Mon Jul 7 22:52:56 2014] Magic number: 6:49:862
[Mon Jul 7 22:52:56 2014] rtc_cmos 00:05: setting system clock to 2014-07-08 01:53:00 UTC (1404784380)
[Mon Jul 7 22:52:56 2014] PM: Hibernation image not present or could not be loaded.
[Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[Mon Jul 7 22:52:56 2014] Write protecting the kernel read-only data: 8192k
[Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
[Mon Jul 7 22:52:56 2014] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[Mon Jul 7 22:52:56 2014] random: systemd urandom read with 1 bits of entropy available
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
[Mon Jul 7 22:52:56 2014] systemd-udevd[50]: starting version 214
[Mon Jul 7 22:52:56 2014] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[Mon Jul 7 22:52:56 2014] serio: i8042 KBD port at 0x60,0x64 irq 1
[Mon Jul 7 22:52:56 2014] serio: i8042 AUX port at 0x60,0x64 irq 12
[Mon Jul 7 22:52:56 2014] [drm] Initialized drm 1.1.0 20060810
[Mon Jul 7 22:52:56 2014] ACPI: bus type USB registered
[Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver usbfs
[Mon Jul 7 22:52:56 2014] usbcore: registered new interface driver hub
[Mon Jul 7 22:52:56 2014] usbcore: registered new device driver usb
[Mon Jul 7 22:52:56 2014] SCSI subsystem initialized
[Mon Jul 7 22:52:56 2014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Mon Jul 7 22:52:56 2014] uhci_hcd: USB Universal Host Controller Interface driver
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[Mon Jul 7 22:52:56 2014] ehci-pci: EHCI PCI platform driver
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: EHCI Host Controller
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: debug port 1
[Mon Jul 7 22:52:56 2014] [drm] radeon kernel modesetting enabled.
[Mon Jul 7 22:52:56 2014] checking generic (d0000000 760000) vs hw (d0000000 10000000)
[Mon Jul 7 22:52:56 2014] fb: switching to radeondrmfb from VESA VGA
[Mon Jul 7 22:52:56 2014] Console: switching to colour dummy device 80x25
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: irq 20, io mem 0xffa80000
[Mon Jul 7 22:52:56 2014] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1028:0x2002).
[Mon Jul 7 22:52:56 2014] [drm] register mmio base: 0xEFDF0000
[Mon Jul 7 22:52:56 2014] [drm] register mmio size: 65536
[Mon Jul 7 22:52:56 2014] ATOM BIOS: ATI
[Mon Jul 7 22:52:56 2014] [drm] Generation 2 PCI interface, using max accessible memory
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (128M used)
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[Mon Jul 7 22:52:56 2014] [drm] Detected VRAM RAM=256M, BAR=256M
[Mon Jul 7 22:52:56 2014] [drm] RAM width 64bits DDR
[Mon Jul 7 22:52:56 2014] libata version 3.00 loaded.
[Mon Jul 7 22:52:56 2014] [TTM] Zone kernel: Available graphics memory: 1026556 kiB
[Mon Jul 7 22:52:56 2014] [TTM] Initializing pool allocator
[Mon Jul 7 22:52:56 2014] [TTM] Initializing DMA pool allocator
[Mon Jul 7 22:52:56 2014] [drm] radeon: 128M of VRAM memory ready
[Mon Jul 7 22:52:56 2014] [drm] radeon: 512M of GTT memory ready.
[Mon Jul 7 22:52:56 2014] [drm] GART: num cpu pages 131072, num gpu pages 131072
[Mon Jul 7 22:52:56 2014] [drm] radeon: power management initialized
[Mon Jul 7 22:52:56 2014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[Mon Jul 7 22:52:56 2014] hub 4-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 4-0:1.0: 8 ports detected
[Mon Jul 7 22:52:56 2014] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[Mon Jul 7 22:52:56 2014] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: WB enabled
[Mon Jul 7 22:52:56 2014] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffff8800370f4000
[Mon Jul 7 22:52:56 2014] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[Mon Jul 7 22:52:56 2014] [drm] Driver supports precise vblank timestamp query.
[Mon Jul 7 22:52:56 2014] [drm] radeon: irq initialized.
[Mon Jul 7 22:52:56 2014] [drm] Loading R500 Microcode
[Mon Jul 7 22:52:56 2014] [drm] radeon: ring at 0x0000000010001000
[Mon Jul 7 22:52:56 2014] [drm] ring test succeeded in 10 usecs
[Mon Jul 7 22:52:56 2014] [drm] ib test succeeded in 0 usecs
[Mon Jul 7 22:52:56 2014] [drm] radeon atom DIG backlight initialized
[Mon Jul 7 22:52:56 2014] [drm] Radeon Display Connectors
[Mon Jul 7 22:52:56 2014] [drm] Connector 0:
[Mon Jul 7 22:52:56 2014] [drm] VGA-1
[Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[Mon Jul 7 22:52:56 2014] [drm] Connector 1:
[Mon Jul 7 22:52:56 2014] [drm] LVDS-1
[Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] LCD1: INTERNAL_LVTM1
[Mon Jul 7 22:52:56 2014] [drm] Connector 2:
[Mon Jul 7 22:52:56 2014] [drm] SVIDEO-1
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] TV1: INTERNAL_KLDSCP_DAC2
[Mon Jul 7 22:52:56 2014] [drm] Connector 3:
[Mon Jul 7 22:52:56 2014] [drm] DVI-I-1
[Mon Jul 7 22:52:56 2014] [drm] HPD1
[Mon Jul 7 22:52:56 2014] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[Mon Jul 7 22:52:56 2014] [drm] Encoders:
[Mon Jul 7 22:52:56 2014] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[Mon Jul 7 22:52:56 2014] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[Mon Jul 7 22:52:56 2014] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 1-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 2-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 3-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: detected 2 ports
[Mon Jul 7 22:52:56 2014] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[Mon Jul 7 22:52:56 2014] hub 5-0:1.0: USB hub found
[Mon Jul 7 22:52:56 2014] hub 5-0:1.0: 2 ports detected
[Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: version 2.13
[Mon Jul 7 22:52:56 2014] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[Mon Jul 7 22:52:56 2014] scsi0 : ata_piix
[Mon Jul 7 22:52:56 2014] scsi1 : ata_piix
[Mon Jul 7 22:52:56 2014] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[Mon Jul 7 22:52:56 2014] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[Mon Jul 7 22:52:56 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
[Mon Jul 7 22:52:56 2014] ata1.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8860, max UDMA/133
[Mon Jul 7 22:52:56 2014] ata1.00: 62500000 sectors, multi 8: LBA48 NCQ (depth 0/31)
[Mon Jul 7 22:52:56 2014] ata1.00: configured for UDMA/133
[Mon Jul 7 22:52:56 2014] scsi 0:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5
[Mon Jul 7 22:52:56 2014] ata2.00: configured for UDMA/33
[Mon Jul 7 22:52:57 2014] usb 4-1: new high-speed USB device number 2 using ehci-pci
[Mon Jul 7 22:52:57 2014] hub 4-1:1.0: USB hub found
[Mon Jul 7 22:52:57 2014] hub 4-1:1.0: 4 ports detected
[Mon Jul 7 22:52:57 2014] [drm] fb mappable at 0xD00C0000
[Mon Jul 7 22:52:57 2014] [drm] vram apper at 0xD0000000
[Mon Jul 7 22:52:57 2014] [drm] size 9216000
[Mon Jul 7 22:52:57 2014] [drm] fb depth is 24
[Mon Jul 7 22:52:57 2014] [drm] pitch is 7680
[Mon Jul 7 22:52:57 2014] fbcon: radeondrmfb (fb0) is primary device
[Mon Jul 7 22:52:57 2014] Console: switching to colour frame buffer device 240x75
[Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[Mon Jul 7 22:52:57 2014] radeon 0000:01:00.0: registered panic notifier
[Mon Jul 7 22:52:57 2014] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 0
[Mon Jul 7 22:53:18 2014] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[Mon Jul 7 22:53:18 2014] scsi 1:0:0:0: CDB:
[Mon Jul 7 22:53:18 2014] cdb[0]=0x12: 12 00 00 00 60 00
[Mon Jul 7 22:53:18 2014] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 2 dma 96 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[Mon Jul 7 22:53:18 2014] ata2.00: status: { DRDY }
[Mon Jul 7 22:53:23 2014] ata2: link is slow to respond, please be patient (ready=0)
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] 62500000 512-byte logical blocks: (32.0 GB/29.8 GiB)
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write Protect is off
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Mon Jul 7 22:53:27 2014] sda: sda1 sda2 sda3 sda4
[Mon Jul 7 22:53:27 2014] sd 0:0:0:0: [sda] Attached SCSI disk
[Mon Jul 7 22:53:28 2014] ata2: device not ready (errno=-16), forcing hardreset
[Mon Jul 7 22:53:28 2014] ata2: soft resetting link
[Mon Jul 7 22:53:28 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:28 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:28 2014] ata2.00: limiting speed to UDMA/33:PIO3
[Mon Jul 7 22:53:33 2014] ata2: soft resetting link
[Mon Jul 7 22:53:33 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:33 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:33 2014] ata2.00: disabled
[Mon Jul 7 22:53:38 2014] ata2: soft resetting link
[Mon Jul 7 22:53:38 2014] ata2.00: ATAPI: CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `, EDC2` `, max UDMA/33
[Mon Jul 7 22:53:38 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:38 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:38 2014] ata2.00: limiting speed to UDMA/33:PIO3
[Mon Jul 7 22:53:43 2014] ata2: soft resetting link
[Mon Jul 7 22:53:44 2014] ata2.00: model number mismatch 'CONY`DFDk/mRG DWmQe8A ` ` ` ` ` ` ` ` `' != 'SO^YpDVD{/}RW TW}Qu8Q p p p p p p p p p'
[Mon Jul 7 22:53:44 2014] ata2.00: revalidation failed (errno=-19)
[Mon Jul 7 22:53:44 2014] ata2.00: disabled
[Mon Jul 7 22:53:44 2014] ata2: EH complete
[Mon Jul 7 22:53:44 2014] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[Mon Jul 7 22:53:44 2014] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[Mon Jul 7 22:53:44 2014] systemd-udevd[150]: starting version 214
[Mon Jul 7 22:53:44 2014] ACPI: acpi_idle registered with cpuidle
[Mon Jul 7 22:53:44 2014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[Mon Jul 7 22:53:44 2014] ACPI: Battery Slot [BAT0] (battery present)
[Mon Jul 7 22:53:44 2014] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[Mon Jul 7 22:53:44 2014] ACPI: AC Adapter [AC] (on-line)
[Mon Jul 7 22:53:44 2014] acpi device:2d: registered as cooling_device2
[Mon Jul 7 22:53:44 2014] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2a/LNXVIDEO:00/input/input2
[Mon Jul 7 22:53:44 2014] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[Mon Jul 7 22:53:44 2014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[Mon Jul 7 22:53:44 2014] ACPI: Lid Switch [LID]
[Mon Jul 7 22:53:44 2014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[Mon Jul 7 22:53:44 2014] ACPI: Power Button [PBTN]
[Mon Jul 7 22:53:44 2014] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[Mon Jul 7 22:53:44 2014] ACPI: Sleep Button [SBTN]
[Mon Jul 7 22:53:44 2014] wmi: Mapper loaded
[Mon Jul 7 22:53:44 2014] thermal LNXTHERM:00: registered as thermal_zone0
[Mon Jul 7 22:53:44 2014] ACPI: Thermal Zone [THM] (25 C)
[Mon Jul 7 22:53:44 2014] intel_rng: FWH not detected
[Mon Jul 7 22:53:44 2014] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[Mon Jul 7 22:53:44 2014] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[Mon Jul 7 22:53:44 2014] leds_ss4200: no LED devices found
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: autoconfig: line_outs=3 (0xf/0xe/0x11/0x0/0x0) type:speaker
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: mono: mono_out=0x0
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: dig-out=0x9/0x0
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: inputs:
[Mon Jul 7 22:53:44 2014] sound hdaudioC0D0: Mic=0x10
[Mon Jul 7 22:53:44 2014] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[Mon Jul 7 22:53:44 2014] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[Mon Jul 7 22:53:44 2014] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[Mon Jul 7 22:53:44 2014] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[Mon Jul 7 22:53:44 2014] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[Mon Jul 7 22:53:44 2014] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[Mon Jul 7 22:53:44 2014] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[Mon Jul 7 22:53:44 2014] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[Mon Jul 7 22:53:44 2014] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[Mon Jul 7 22:53:44 2014] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[Mon Jul 7 22:53:44 2014] kvm: disabled by bios
[Mon Jul 7 22:53:44 2014] input: Dell WMI hotkeys as /devices/virtual/input/input9
[Mon Jul 7 22:53:44 2014] iTCO_vendor_support: vendor-support=0
[Mon Jul 7 22:53:44 2014] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[Mon Jul 7 22:53:44 2014] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[Mon Jul 7 22:53:44 2014] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[Mon Jul 7 22:53:44 2014] gpio_ich: GPIO from 206 to 255 on gpio_ich
[Mon Jul 7 22:53:44 2014] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[Mon Jul 7 22:53:44 2014] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[Mon Jul 7 22:53:44 2014] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:15:c5:4b:f3:24
[Mon Jul 7 22:53:45 2014] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[Mon Jul 7 22:53:45 2014] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[Mon Jul 7 22:53:45 2014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[Mon Jul 7 22:53:45 2014] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 128333
[Mon Jul 7 22:53:45 2014] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[Mon Jul 7 22:53:45 2014] mousedev: PS/2 mouse device common for all mice
[Mon Jul 7 22:53:46 2014] random: nonblocking pool is initialized
[Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[Mon Jul 7 22:53:48 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[Mon Jul 7 22:53:48 2014] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[Mon Jul 7 23:11:28 2014] b44 ssb0:0 eth0: Link is down
[Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[Mon Jul 7 23:12:19 2014] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[Mon Jul 7 23:12:54 2014] PM: Syncing filesystems ... done.
[Mon Jul 7 23:12:54 2014] PM: Preparing system for mem sleep
[Mon Jul 7 23:12:55 2014] Freezing user space processes ... (elapsed 0.047 seconds) done.
[Mon Jul 7 23:12:55 2014] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[Mon Jul 7 23:12:55 2014] PM: Entering mem sleep
[Mon Jul 7 23:12:55 2014] Suspending console(s) (use no_console_suspend to debug)
[Mon Jul 7 23:12:55 2014] b44 ssb0:0 eth0: powering down PHY
[Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Mon Jul 7 23:12:55 2014] sd 0:0:0:0: [sda] Stopping disk
[Mon Jul 7 23:12:55 2014] PM: suspend of devices complete after 393.015 msecs
[Mon Jul 7 23:12:55 2014] PM: late suspend of devices complete after 0.713 msecs
[Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[Mon Jul 7 23:12:55 2014] PM: noirq suspend of devices complete after 15.766 msecs
[Mon Jul 7 23:12:55 2014] ACPI: Preparing to enter system sleep state S3
[Mon Jul 7 23:12:55 2014] PM: Saving platform NVS memory
[Mon Jul 7 23:12:55 2014] Disabling non-boot CPUs ...
[Mon Jul 7 23:12:55 2014] smpboot: CPU 1 is now offline
[Mon Jul 7 23:12:55 2014] ACPI: Low-level resume complete
[Mon Jul 7 23:12:55 2014] PM: Restoring platform NVS memory
[Mon Jul 7 23:12:55 2014] Enabling non-boot CPUs ...
[Mon Jul 7 23:12:55 2014] x86: Booting SMP configuration:
[Mon Jul 7 23:12:55 2014] smpboot: Booting Node 0 Processor 1 APIC 0x1
[Mon Jul 7 23:12:55 2014] CPU1 is up
[Mon Jul 7 23:12:55 2014] ACPI: Waking up from system sleep state S3
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[Mon Jul 7 23:12:55 2014] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[Mon Jul 7 23:12I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back. -
I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. With the Pages app open how do I use the Time Machine to go back five hours to see my page? Can I access Time Machine within an app like Pages? How do I enter Time Machine within the application? It always takes me to the Finder. I apolgise for the mumbo jumbo. I simply do not know how to use Time Machine. It makes sense when I follow the Tutorial but then I lose it.
OK. You've kind of skipped over the reason why you want to go back five hours, but my assumption would be that you've made changes to a Pages file that you want to revert.
There are two ways to tackle this. From Pages itself, open the current version of your document, and from the File menu, click Revert To, and Browse All Versions. You'll then be in the Time Machine interface for that file, and can browse back to the version you want.
Or, outside of Pages, you can select the file (or the folder it was originally in, if you've since deleted it) and enter Time Machine from the TM menu (it sounds like you've already tried this?)
best
Matt -
My screen turned blue then shut off on it's own and will not come back on even after a recharge ??
My screen on my 4th generation ipod touch turned blue shut off automatically & wouldn't come back on,tried recharging over night no change?? Unable to fine my serial number because it will not turn on and back number is rubbed off?
Try:
iOS: Not responding or does not turn on
If not successful time for an appointment at the genius Bar of an Apple store.
To find SN see:
iPod: How to find the serial number
Also, if you go to iTunes>Preferences>Devices and hover the mouse pointer over the iPod backup the SN will appear..
Also, if you go to iTunes>Help and click on About iTunes with the Control button pressed, the SN will scroll in the About iTunes panel. -
All my calendar events moved back one hour after daylight savings
After daylight savings I noticed that all my calendar events are now showing one hour later. With an average of 10 events a day, there is no way to manually correct this- HELP!!!!! I was just one hour late to my first appointment of the day thanks to iCal and it's syncing to my iPhone.
OK, I did this. Then I closed iCal, then I reopened it. All my appts remain one hour late. Perhaps this will prevent this from happening during the next daylight change, I guess I will find out. "Time Zone support" to me implies that the time should be corrected if the computer moves to a new time zone.....
Irregarless. I've still got hundreds of appts showing an hour late, and as I enter more and more each day, it will become more and more confusing as to which ones are set to the correct time, and which ones are one hour late. How can I get all my appoints to show the correct time?????
HELP! -
Audio comes back on quicktime after being deleted
Ok so I'm trying to export a movie (on iMovie '09), having deleted (or muted) all the original audio so its a silent film. But when I export it onto quicktime, some of the original audio creeps back into the movie. Is there anyway I can easily fix this???
Found out a solution on the forum and solved my problem...
"Check to see if you are using any custom fast motion or slow motion settings. As long as you stick to the pre-sets on the tic marks (like 25%, 50%, 200%, etc.), the sound is OK. When you go for a custom setting like 58% or 137%, it seems to mess up the sound."
Hope it will help you, -
I am working from a laptop, running 10.9.5 with Creative Cloud.
CC14. I think all my setup are correct not sure hoe to correct this.
Thank you.
M…It looks like when I choose the automatic mode to show or hide for the dock the problem is solved…
-
Does control comes back to servlet after redirecting to a jsp page.
Hi
I have a query on request dispatcher.
I have redirected control to a jsp page in my java class as below.
HttpServletRequest request=null;
HttpServletResponse response=null;
RequestDispatcher requestDispatcher = request.getRequestDispatcher("a.jsp");
try {
requestDispatcher.forward(request,response);
} catch (ServletException e) {
System.out.println("success");
e.printStackTrace();
} catch (IOException e) {
System.out.println("success 1");
e.printStackTrace();
finally
System.out.println("success 2");
System.out.println("success 3");
Jsp page is successfully diaplayed in browser.
but when i see my console window in eclopse IDE...
I does not diaply Success 2 / Success 3....
Please help me..
thanksThis is an eclipse/server question... not really a java question.
I have NO IDEA how eclipse interplays with you're (unspecified) server.
I can tell you that typically the standard output and error streams of the J2EE server are redirected by the server startup script to a file in the deployed applications root directory... So have a look around.
Edited by: corlettk on 16/05/2008 04:49 - Oops. -
My Macbook pro 1,2 monitor and laptop screen goes black once in a while and then comes back on
Hello all,
Thank you very much for taking the time to view my issue. This issue just started about a month ago, I have a 22" LCD Monitor that I have been using, when this issue started the monitor would flicker and the screen would go black, but if I turned it off for a bit then turned it back on it would come back on. After a while it just started to go black and not come back on at all, so I decided to disconnect the monitor and use the notebook screen, I thought the monitor itself was broken. The notebook screen was working fine up until the last week, it is now doing the exact same thing, when my computer wakes up from being asleep it sometimes flickers then goes black, I can still faintly see the outline of the programs I have up but it is completely black. Sometimes it is a pain to get back on and I have to force shutdown and turn it back on to get it working. I am not sure what the problem is but I really want to get it fixed.
My Macbook Pro 1,2 is the first model made, but it was the best model available at the time. It has a Intel Core Duo 2.16GHz chip with 2GB of ram and a 160GB hard drive, it also has an ATI Radeon X1600 video card with 256mb of Vram. If anyone has any suggestions or resources I can use, I would greatly appreciate you sharing them with me.
Thank you very much in advance!
Sincerely,
Saggz.Hey Fleurdemimi,
Thanks for the question. I understand you are experiencing issues with your iPhone 4s. Based on the information you have provided, restoring your iPhone in recovery mode may resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
I always turn on my computer first thing in morning to see if any important e-mail comes through and since it's at least another hour before I get to work, the computer goes to sleep. Well, yesterday, the display wouldn't wake up and stayed black. I called Apple Tech support and the nice guy on the phone walked me through resetting the internal power and zapping the PRAM. I had no problems for the rest of the day. THis morning, the same thing happened after it went to sleep for the first time during the day after having been started up. THis time I knew what to do, but I'm dreading the same thing happening. Any reason why this is and is there anything else I should do? It's a 2011 MacBook Pro and runs Snow Leopard (10.6.7).
I am having the similar issue. I will open my powered up machine, and I will the display will turn on for a few seconds then it seems to go right back to sleep. I need to close the lid and reopen it again and the display comes back. Today after it came back on 2 minutes later it happened again.
-
I send a cookie to the server, but it doesn't come back.
Hey all:
I'm attemping send a cookie via an application to the servlet, and then pull that cookie back out from the servlet's response. I want to do this whole process repeatedly while retaining the same cookie.
Pulling the cookie out on the first request to the servlet works fine because I do not send a cookie to the servlet, and the servlet instantiates a new session. Next, the cookie is sent back to the servlet successfully because it is printed out on the server-side exactly as it appeared on the client side. However, after the servlet responds to that second request and on subsequent requests, I can not pull the cookie out again. On the method call, connection.getHeaderField("Set-Cookie"), the result is null. I've even inspected the connection object, and it seems empty of any cookies whatsoever. Why doesn't the cookie come back on requests after the initial request? Is there anything I can do to make it come back?
Thanks a ton in advance. Have great day!!!you must check that cookie's path set by Tomcat is the one expected by your browser. Otherwise the former won't send it back to the server. I had the same problem because Tomcat sets the cookie path to "/webAppName" and the browser expected it to be "/".
-
my iphone went black and it will not come back on even after i held the botons down for a min
Hey dodie67,
Thanks for the question. Sounds like your iPhone stopped responding to buttons, switches, or touchscreen input, so you'd want to go through the troubleshooting steps in the following article and see if that resolves the issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Take care,
David -
URGENT!!! Diff SessionId when request come back after completing one task
Hello,
I have a web application that uploads collages done from our site1 to some other site2. To upload to site2 one has authenicate youself....in this process of authenication , sometimes !!!!when the request comes back to site1 after authentication the sessionid is differemt....although this does not happen all the time...it happens for some users and for some it deosnt.....
how do i get my prevoius session id incase its different from the orginal one....
Is there a way to get arround this problem....
Urgent...its production issue....i need help
-Praveena1. Dont mark your posts 'urgent' - it would more likely put off people.
2. If you get a new session, it means the original session has been discarded and there's no way you can retrieve it.
3. What do you mean when you say a web application that uploads from one site to another site? How does it work? Is your jsp page (from which you upload part of web application in site1 or site2)
ram. -
Firewire 800 Port back to life after power shutdown?
I experienced a strange event and would like to share it with you for feedback and comments.
During several days the external hard disk connected to the Firewire 800 port of my IMAC caused me increasingly problems, and eventually the disk would not mount at all on the desktop. I connected the disk to the FW800 port of my portable and the disk worked quite fine. I concluded that the FW800 port of the IMAC was damaged. I was preparing myself to contact Apple to get the IMAC repaired.
Then recently we had a general shutdown of power in our town, for several hours.
When the power came back, I had the idea to reconnect the external disk to the FW800 port, and miracle, the disk mounted immediately and has been working fine since.
Is is possible that the ports of the computer come back to life after a power shutdown? How is this possible?
Can I conclude that it is recommended to disconnect a computer from time to time, just to reset some parameters?Yep, both USB and Firewire ports can get in into a "bad state" and only complete removal of power will reset those chip sets.
Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes powering the ports to do stuff like detect when a device is plugged in or wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive. Now let it sit for a minute (give those big power caps in there time to discharge). Now plug stuff back in & start up the Mac. Now see if your USB or Firewire ports work any better.
Even Apple acknowledges this occasional issue...
What to do if your computer won't recognize a FireWire or USB device
http://support.apple.com/kb/HT1317?viewlocale=en_US
Best of luck!
Patrick
Maybe you are looking for
-
Application list not showing in GoTo menu in 5130
When I try to add applications to the GoTo menu in 5130-c2, the application list (from Select Options) is not showing. Instead it hangs and I need to switch off my phone and restart. My software version is latest. Please help me solve this. I have in
-
In fnd_request.add_layout how to get the layout in EXCEL Format
Hi All, After applying the patch (5688014), in WSH_DOCUMENT_SETS package fnd_request.add_layout is getting called as below. I am getting the output in PDF format, when called from Document sets. But my requirement is i want the report to be in EXCEL
-
Downgrading from Win 7 64 bit to 32 bit
I know it's odd, but I have programs that won't run in 64 bit windows 7 but work fine in 32 bit win 7. I have a G570 (4334) (64 bit win 7) and would love to download or get Lenovo disks for the 32 bit windows 7. http://support.lenovo.com/en_US/downlo
-
Crossover cable needed to connect Switch to Airport?
I need more ports. I got more stuff to hook up than available ports on the Airport. I picked up a switch but couldn't find anything in the boards on whether a crossover or straight-through cable is required to connect the two. I suspect the Airport p
-
Tuning for write once/small records
Hello! I'm investigating using je with collections for a couple of repositories. My use cases center around write-once objects, with indexed access via subMap. The api and recovery features of je make it appear well-suited and convenient. One databas