HP C6280 All-in-One connect to wireless

I am trying to connect my HP C6280 to a Belkin wireless router. Is this possible to do with this printer ?

Hello again demy6123,
Thank you for getting back to me with the computer information.
I have a few steps that we can take to see about installing the printer on to your computer and connecting over a wireless connection.
First off, please click on the following link for the HP Photosmart Full Feature Software and Drivers and save the download to the Desktop of the computer. This will allow the download to create it's own icon and make it easier for us to find when the download is complete.
The second step has to do with the printers power supply. Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
When the download is complete, please double click on the new icon and follow the instructions. The installation will asks you if you are going to connect Wireless, USB or Ethernet. Please select the Wireless and follow the remaining instructions.
Please let me know if you have any issues or if you have any other questions, please feel free to ask.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Pro x64 all in one connection to wireless I am not a IT person

My wireless is on but I am doing something wrong because it is not connecting to the printer. I have made several attempts but to no avail. Probably not looking in the right place as I am an Accountant not computer smart, not dumb but just not to smart about IT stuff. Please can I get some assistance.
Thanks Cabelgrl

Hello there @cabelgrl , Welcome to the HP Community
I understand you are showing the "wireless is on", however there is no connection to the printer. I will do my best to help you out!
If the printer is on the wireless network successfully, meaning you have ran the wireless setup wizard from the front control panel on the printer, and it connected, you can now move on to the computer work.
On the computer, download and start the installation for the printer. Here is the direct link you will need: HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
Run through the installation, following the on-screen instructions, and if you run into any error messages or codes, respond to me with the details and I will help you.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Re-install software for the C6280 all in one printer... get an error message "can't find file"

need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.

Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?
I am changing the set up of my home computer to add another computer.
I would like to go wireless from my computers to the hub and wired from the hub to my
printer. I do not think this printer can do that since it does not have the ports to connect to a router hub, I think.
I am rather new to this way of setting up, so any help would be nice.

You could get a wireless router that supports USB printers, but these only support printing, not scanning. You could just go buy a new wireless printer since your printer is pretty old, anyway.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I get to the photo tray when using iphoto with HP C6280 all-in-one printer

How do I get the photo tray option to come up in iphoto from my mac notebook when I have an HP C6280 all-in-one printer

I have an HP all-in-one C5140. When I print from iPhoto the dialog that comes up has a "Presets" drop down at the bottom. One of the choices is "Print from Photo Tray." Is that there on yours? If not make sure you have the latest software from HP.
Dan

How do I get my HP Photosmart C6280 All-In-One to scan?

I have updated to Mac OS 10.9 the driver for my HP Photosmart C6280 All-In-One, but the scanner function no longer works. The Apple update list shows the update was performed on October 30.
The printer does not show up in the list of printers as a "Bonjour" printer, as the instructions from HP's website indicate it should.

Hi there,
I understand you're having issues printing/scanning with your Photosmart C6280 since upgrading the 10.9 on your Mac. I would like to help you with this as best I can.
The reason your having issues is because the HP software you're using is not designed for the 10.9 operating system. The last full software package HP released for the Photosmart C6280 was for 10.6, so the best option at this point would be to use the in operating system drivers.
To get everything to work properly again, I'm going to link you to how to completely remove the HP software so you can use the Apple software as Sunshyn2005 has described in her post. Once you follow those steps to begin using the Apple software you may not know how to scan using the Apple software and you can learn 3 different ways to do so.
I hope this helps, have a great weekend!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Photosmart C6280 all in one

I have a photosmart C6280 all in one printer. I purchased a HP Envy TS m6 sleekbook with Windows 8.1 OS. Can I use my printer with this computer and what do I have to do to get it set up (ie drivers, software etc) I need good detailed information and how to as I am not very well versed or anykind of a techy. Thank you in advance

Hi ,
The following link will let you download the HP Printer Install wizard, which will guide you through the printer installation process.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02691615&cc=us&dlc=en&lang=en&lc=en&product=319...
-I work with HP, but these comments are my own.

C6280 All in One ink error message

Hi there,
I have the HP photosmart C6280 All in One printer that recently requested that I replace the Magenta ink. I did so but when I attempt to print I get the following message.
To print in color, instal the following cartridges:
Magenta
To print with black only, click black only. to begin printing on certain products, press the Resume button on the printer control panel. the printer will replace colors wit grayscale.
To cancel, press the cancel button on printer.
If empty ink cartridge is not replaced soon, all printing will stop.
I have had this issue before and someone told me how to fix it but I can't find the original message or email for it at all but it work fabulous and I think it involved a reset. Can anyone assist me with this, perhaps explain how to reset the C6280.
Thank you

For resetting the printer ink system, try this document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01709782&cc=us&lc=en&dlc=en&product=3194498
Removing the ink/power reset procedure can eliminate the cartridge message.
For missing colors in the output, try this document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01124477&cc=us&lc=en&dlc=en&product=3194498
NOTE: step 8 has a hyperlink that is no longer valid. The cleaning of the printheads will affect your color output greatly.
I hope this will help you.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

C7280 All-in-One connected wirelessly to a modem-router needs a password when powered-up.

Do you have any examples of wirelessly connecting an HP Photosmart C7280-All-in-One to a network run by a NetComm NB6Plus4W modem-router? The modem-router also attaches a Windows XP desktop computer using an ethernet cable and a Windows XP laptop computer wirelessly using the default SSID (wireless) and password (a1b2c3d4e5).
The wireless connection between the modem-router and the laptop comes up automatically when the modem-router and laptop are powered-up.
The wireless connection between the modem-router and the HP Photosmart does not establish automatically. When I power-up the HP Photosmart I then have to use the setup button on the Photosmart and manually type in to the Photosmart the password (a1b2c3d4e5). The SSID displays as wireless, it does not have to be retyped.
Do you know if there is any NetComm or HP configuration which will cause automatic setup of the HP Photosmart to occur when it is powered-up?
What I am complaining about is having to manually type in the HP's password to the HP whenever the HP is powered-up.
This question was solved.
View Solution.

The information that i gave was based on the info you provided, and only told you what steps would work. Troubleshooting process does involve guesswork as the issue that you're facing could be caused due to many reasons, and doing each and every step is a process of eliminating all the possible causes and narrowing it down to one particular cause. If you don't like what I have to offer, then feel free to not follow it. Lets see how fast you can get it to work on your own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

HP Officejet 6500A Plus e-All-in-One Printer - E710n wireless print and web app problem

We have an HP Officejet 6500A Plus e-all-in-one Printer - E710n and run Windows 7 on our laptop.
I have run the wirelss setup wizard and have successfully connected the printer to the router, and both the laptop and printer are on the same network and have identical SSID.
However, we can not send any prints the printer wirelessly. We have to hook it up to the USB to do so. We are also unable to access our web apps; pressing the app button on the printer control panel brings up the following:
"Connection error. The printer was unable to connect to the server. Check your internet connection and try again."
I have run through the suggested solutions under "A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint" in the customer care help centre which didn't work, although when I tried to enter the IP address under IPv4 into the browser address bar it timed out. I tried the HP Print and Scan Doctor, but it returns a result that suggests everything is fine.
I turned off the firewall and tried again with no luck.
I really am at a loss now. Diagnostics say it should work, but it doesn't. Help!

Disable Bitdefender altogeher and try again.
Also, see this: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02251103
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP ENVY 114 all-in-one d411c and wireless printing.

I have a HP ENVY 114 all-in-one d411c printer connected wirelessly and a HP Pavilion HPE h8-1237 which is also connected wirelessly to my NetGear N750 Wireless Dual Band Gigabit Router. The problem is that the printer, according to the desktop computer, is constantly going OFFLINE. I have tried reinstalling printer software, ran the Print and Scan Doctor, etc. with no luck. I think the problem is with the desktop computer because I also have a HP Pavilion dv7 notebook which is also connected wirelessly and it can print all day long with no problems, never goes OFFLINE. I don't know what else to do. I recently upgraded both computers to Windows 8 Pro. The printer worked fine when I was using Windows 7 Ultimate. I need some suggestions, Please. Thank You in advance.

Sounds like you are having issues with your printer going offline? Now is this actually inhibiting your printing? Because if the printer is in sleep mode it will register as offline. If you ARE having issues with printing, then we can check some of the setting on the router. Here are its specs :
http://reviews.cnet.com/routers/netgear-n750-wireless-dual/4507-3319_7-34467825.html
Here I can see that there are potential hazards, I would recommend contacting Netgear and making sure that the router is broadcasting on the 2.4GHz range, and that it is set for 802.11g and not 802.11n wireless. These could effect your printer's responsiveness.
Run this diagnostic tool :
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
And as a last bit, you might want to consider setting the printer up with an Ethernet-network connection and seeing if the issue is with the method of communication.
Let me know and I will get right back with you!

Anyone had any luck scanning with hp all in one connected on airport express usb bonjour

Can someone tell me if apple will provide any support for scanning device included in hp all in one printers when connected on airport with USB bonjour network?
From what I have read so far, it would seem that the only way to get a network printer to work decently is to use it with an airport extreme base station with an ethernet cable. The usb "way" of the airport express doesn't seem to handle any fancy utility like ink level, test page or scanning.
Anyone have a solution other than that of buying an airport extreme base station ?
Sorry for my english, i'm from québec Canada (french canadien)
Thanks for any help

Can someone tell me if apple will provide any support for scanning device included in hp all in one printers when connected on airport with USB bonjour network?
Apple receives the printer driver software from various manufacturers. So far, none of the printer manufacturers have chosen to include extra features in the "USB network" versions of the software. Since this is a user forum, none of us here have any knowledge about what future plans may be.
Your question really should be directed to the manufacturer of your all-in-one device. While we can't speak for Apple, it would be logical to assume that they would include this software shortly after it is made available by the printer manufacturer.
From what I have read so far, it would seem that the only way to get a network printer to work decently is to use it with an airport extreme base station with an ethernet cable.
That's correct. Another way of saying the same thing is that if you want your all-in-one device to function correctly on a network, then look for a network all-in-one device, not a USB device. A properly configured wireless all-in-one would also work as a network device, since it connects to the network, not to USB.

How do I make my all-in-one HP printer wireless for my laptop?

I have a HP Photosmart C7250 All-in-One printer. Just bought a HP Pavilion dv6-6113ci Laptop. I have a Netgear modem. Instructions in book to convert to wireless is in Greek to me. Is there an easy fix to making my printer wireless??

Hi,
What are you trying to fix ? What is your Netgear modem ? Does it have wireless router to go with it ? Please check this book and select one suitable connetion for your existing hardware.
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
You may be able to setup like this (if no wireless router):
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printing with HP all-in-one connected to Airport Extreme with USB

We have an HP Photosmart 2610 all-in-one, an AirPort Extreme base station, and a G-5 MacIntosh running OS 10.4.8. We can print when the all-in-one unit is connected directly to the Mac with USB cable, however, we are unable to print when the USB cable is connected to the base station. What can you suggest?

Which driver are you using?
According to HP must use drivers 6.3.4 or 7.0
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00035369

HP Photosmart C6280 All-in-One Printer CIT248813-HPU-REDBOX-v4.exe error

Using-Microsoft Windows XP Professional SP3, Network connected
In HP Digital imaging monitor: Went to Help>Check for updates Update file CIT248813-HPU-REDBOX-v4.exe downloads, but after it looks like its installing, I then get the following error message :Critical Update to HP Product Assistant Failed. Where do I get the file and download it by itself, to then try and load it outside of HP Digital imaging monitor?
When I do a search for the .exe file, nothing comes up.
Per HP help, I have tried:
Check for updates:
=================
Please visit the weblink below and click on the hyperlink "Automatically check to see if you have the latest software and drivers ". If you do not find any updates for the All-in-one software, then perform the below steps to disable the product assistant in the startup files.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&dlc=en&cc=us&product=3194498
Step 1: Enable Passive FTP
====================
1. Open Internet Explorer.
2. From menu options, click Tools.
3. Click Internet Options.
3. Click Advanced tab.
4. Under Browsing section, scroll down and put a check mark next to "Use Passive FTP"
5. Click Apply, and then OK.
Check the functionality. If the issue persists, please perform the steps below.
Step 2: Disable antivirus and firewall
===========================
Please follow the steps to disable the anti-virus and fire wall:
Disable Anti-virus:
=================
1. Look at the very bottom right corner of the screen.
2. You should see several icons.
3. Place the mouse pointer on each icon to see if a strip of text pops
up.
4. If you see the strip of text, it will tell the name of the program
that the icon represents.
5. If you find the icon for the virus protection software, right-click
on the icon.
6. In the pop-up menu, choose the option to disable or close the
program.
Disable the fire wall
1) Click start -> Click Control Panel -> Security ->
2) Under Windows Fire wall option select On/Off Windows Fire wall
3) Click off radio button to turn OFF the Windows Fire wall.
Check the functionality. If the issue persists, please perform the steps below.
Step 3:
=====
Please perform the steps below to update the All-in-One software manually.
1. On the Windows taskbar, click Start , click All Programs , and then click HP .
2. If HP Update is available in the list of programs, Click HP Update to open the HP Update dialog box, and run the HP Update utility to download updates.
Check the functionality. If the issue persists, please perform the steps below.

still having this issue. Can anyone offer any advice? Where is the actual file on my PC? Why won't this load?

HP C6280 All-in-One connect to wireless

Similar Messages

Maybe you are looking for