HP Deskjet 1510 Allin One ggoes thru motions to print but does not

I've set up the new printer and it goes thru the motions even runs the paper thru but there is nothing on the paper.
I have unplugged and replugged in restarted computer etc and still nothing HELP

Hello @kckatie13,
Welcome to the HP Support Forums! I see you have recently set up your HP Deskjet 1510 to your computer running the Windows 8 Operating system. When you send a print job the printer prints blank pages. To better assist you can you please leave me with the following information:
1. What is the Exact model of DJ 1510 you are using, as there are 2. DJ Ink Advantage 1510 and the DJ 1510?
2. How is the printer connected, USB or Wireless?
3. Do you get any error message when you attempt to print?
4. How did you install the software, CD or download?
Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know what the PSDR finds, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Navigation bar not working cannot add a new one says there is a warning but does not indicate what kind of warning

In the space where you would add a widgit there is a warning so a new navigation bar cannot be added. I tried uninstalling and reinstalling but that did not help. When I pulishedd my website the navigation bar did not work. It only linked to one page but I cannot fix the problem because of the warning.

Hi
Are you creating a manual menu and while adding another menu item you are facing error ?
Please elaborate more as what are the steps you are taking and upload screenshots of navigation bar that you are using in design mode , if site is published then share the url.
Thanks,
Sanjit

Wireless All-in One receives scan and ink level but does not print

My wireless printer was working fine, now it can scan and send scan to my computer, my computer receives ink levels in the utility. Now it will not print from Word or other programs that I was able to print. When I restart the computer with a document in the printer queue, when it gets to my desktop screen, it prints. But still will not print from Word unless I do the restart again. I have restarted the printer(which works with other computers in the house) and even deleted and reloaded the HP program. My computer receives but does not print. I even tried direct usb connection

Hi raavindra,
Welcome to the HP Forums.
I see that you are having some issues when attempting to do a scan or a copy.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How do I undo the last Mac update for my epson all in one. It did work beforehand but does not now.

Yesterday I installed an Apple update for my Epson printer, but I cannot now print! Any ideas.

Restore backup taken prior to update.
Allan

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe

HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

I have installed the updates for my HP Photosmart All-in-One c309a. It prints, but will not scan. Tells me to update - I did that, but still won't scan. Any suggestions to make the scanner work?
This all worked perfectly with my old 2008 MacBook Pro.

Have you tried scanning from Image Capture or Preview?
A current driver is shown to be available for Mavericks (auto-downloaded):
http://support.apple.com/kb/ht3669#HP
But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
LN

While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST

I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx

I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx

You have done everything verbatim included with this link?
http://support.apple.com/kb/ts1538

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router.

I am currently using FormsCentral to distribute a form created in Acrobat. I need to add an option to one of the drop down fields but do not want to re-distribute the form due to reporting purposes. How can I do this?

I am currently using FormsCentral to distribute a form created in Acrobat. I need to add an option to one of the drop down fields but do not want to re-distribute the form due to reporting purposes. How can I do this?

You can open the form in Acrobat, select "File > Save a Copy", open the copy you just saved (it doesn't happen automatically), edit the dropdown to add the new item, save as a new file, and then Reader-enable the file by selecting: File > Save As Other > Reader Extended PDF > Enable More Tools. The resulting PDF should work with FormsCentral just like the original.

HT1347 I have an mp3 DVD with episodes of Gunsmoke. iTunes imports them, but does not sort them correctly by date or episode. One file name is GS 52-04-26 001 Billy the Kid.mp3

I have an mp3 DVD with episodes of Gunsmoke. iTunes imports them, but does not sort them correctly by date or episode. One file name is GS 52-04-26 001 Billy the Kid.mp3. iTunes sorts them by month/day/year. How can I fix that?

The weird thing is, it worked before. I encoded all the videos previously and had them all listed and didn't encounter this problem, but I noticed I'd forgotten to decomb/detelecine the videos so I deleted everything and re-encoded it all. AFter filling the tags out and setting poster frames again I was thinking of making life easier by just pasting the same artwork for every episode, so I did, but didn't like the results so I deleted it again (I selected every video, used Get Info and pasted the artwork that way).
I think it was after this that the problem started to occur. In any case I've been through every episode and made sure the name, series, episode and episode id fields are all filled in with incremental values and they are. I even made sure the Sort Name field was filled in on every video. But this didn't work either.
So, thinking another restart was needed I deleted every video again. Re-encoded them all, again. Set the tags for every video and poster frame again. Finished it all off nicely, checked cover flow and was highly annoyed to find it was STILL showing the same two pieces of art work for every video as shown in that image I posted.
Ultimately, I wouldn't care so much that cover flow is screwing up like this as I always intended to sort by program anyway so it would only ever display one piece of artwork for an entire series of videos, however where-as when it was working it picked the artwork for the first episode of a series to display, its instead picking one of the latter episodes. I can't seem to find any way of choosing what artwork I want displayed.

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

Doug's got it right. It sounds like you are trying to open a later version file in an earlier version. This will always be handled as opening the PDF portion of the file. Try Googling AI_openMultiPagePDF for a script to open these or Resave from the newer version to the older.

CL_WD_RUNTIME_SERVICES= ATTACH_FILE_TO_RESPONSE( ) works in one system but does not in other

Hi folks,
We are facing an issue here with a custom web dynpro application that export an excel. The following piece of code has been written in this application to export an excel:
cl_wd_runtime_services=>attach_file_to_response(
       EXPORTING
         i_filename      = c_filename
         i_content       = xtext
         i_mime_type     = c_mimetype
         i_in_new_window = abap_false
         i_inplace       = abap_false ).
Now, the issue is this - it works fine in one system but does not in other system. HttpWatch shows ERROR_HTTP_INVALID_SERVER_RESPONSE in the system where it does not work. Any ideas?
Regards,
Shiromani

Hi Shiromani,
You mean "Other System" is other PC. If so, it seems that there is an issue with browser
Please check the below SAP note
1679126 - Server sends timeouts that cannot be reproduced
Also, compare the browsers versions in both systems.
Regards,
Rama

HP Deskjet 1510 Allin One ggoes thru motions to print but does not

Similar Messages

Maybe you are looking for