Hp dv 9500 power up probs

hi i have a dv9500 and when on battery it will power up fine and if mains is plugged in then it will just cut all power to laptop
oddly if not powered up it charges fine have read many threads on many sites but no one seems to ave this prob
PLEASE HELP

Hi:
You have to load the SATA ACHI drivers in order to install XP.
Please see this link below on how to do that.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/SATA-drivers-for-XP-solution-on-0x000000...
You may also want to see if you can get set of Vista recovery disks for the notebook as well. Below is the link to some general info on how to go about doing that.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&lc=en&dlc=en&cc=us&sw_lang=&product=40...
Paul

Similar Messages

Power Up probs with kt6 delta fis2r

I've recently changed my mother board and given my kt6 delta fis2r to my dad. It came out of my comp in fine working condition (earthed when removing etc.) It's now in my dad's case and when it's switched on it immidiatly switches off again. The bios was updated to 5.5 but was working for weeks before being moved. Anyone have any ideas?
Thanks in advanced.

Just spoken to him, he's had the board out on the box connected it accross and it does the same, it's not actually getting far enough to give anything on the d-bracket. I've got a spare power supply here that isn't a Q-Tec and we're gonna try it on that first. My bro has also had probs this weekend so I'm told, he had a KT6V with the same power supply, and is now running my dads kt4 ultra. My bros PSU isn't liking my dad's comp either, so I'm now wondering if it's something to do with the 4 pin power plug on both PSU's? Still confused tho as I havn't had any probs with the board while it was on my Q-tec PSU, just lucky I guess?
Thanks for all of the replies, I'll be changing my PSU asap.

KT3 power/mem probs

I have a KT3 Ultra2 board and when I switch on after shutting down I get 3 beeps and the J-LED hangs on memory init, However If after shutdown I switch off at the mains and switch back on it boots no probs. I also have this problem when using S3 standby function and I need to get the thing to wake up on LAN. Has anyone else got this problem??????????
SPEC
KT3 Ultra2
XP1700+
2 X 256 DDR (266mhz)
Geforce 3 Ti200

i got the exact same problem
when i turn it on i get the 3 beeps and i have to turn it off from the back and turn it back on
what a f*uckin pain. i expected better then this
what kind of ram are you using?
i have a 256 meg pc2100 samsung stick

PC-CAM 950 Slim power on prob

when i power on my camera the red light gets on after few second it goes off. It shows that its busy.even if i connect to pc the same thing happens and in the windows device is not recognized.can anyone tell me some tips what to do?i checked the sites to update the firmware,but culdnt find it.is there sumthing that i can do so tat it work properly.i appreciate if sumone can help me...
fais

$<div class="lia">WE CAN ALL SEE NOW THAT EVERY BODY IN CREATIVE COMPANY ARE SLEEPING
THEIR PRODUCT SUPPORT IS NON EXISTANT
THE MODEL PC CAM 950 is not even mentioned in any of support pages
LET US NOT TOUCH ANY CREATIVE PRODUCTS IN FUTURE EVEN WITH A LONG POLE
RAO

Nokia 770 power off probs - is it faulty?

Hi,
I've just had my 770 for a few days and keep bumping into a problem:
when the device 'sleeps' it can ony be rebooted and doesn't just wake up on screen/key presses.
This is causing flashdisk corruption if apps are running on suspend so i'm pretty convinced it's a fault.
If the screen cover is used then it wakes up first time but subsequently doesn't.
If it's running on external power then it wakes up ok.
An overview of the power states, transition events and indicators (eg sounds) and seep/suspend/hibernate/off modes would be most useful.
Please advise whether you think this is a fault or 'operator error' so i know whether to return it for replacement.
TIA.

Thanks for your reply. I'm having it replaced as faulty.
If the 800 was a bit cheaper I'd be tempted but it's nearly 200GBP more, isn't that much more functional and doesn't have screen protection. I really hope the 2007HE OS update comes through soon but it is a shame flash8+, skype etc can't be included.
Cheers,
sparky.

Power connection prob

Hi all?When I plug my Zen into either the mains or my PC, a black plug appears when it's turned on instead of the light coloured one, and it never shows the charging bar. The battery is completely dead and won't turn on unless it's plugged in. Clean up won't work. What should I do? ThanksMessage Edited by dlevene on 09-29-200705:50 AM
Message Edited by dlevene on 0-0-200706:34 AM

Ok, I think the problem is the power connection. If I jiggle the battery around, it detects it (the power bar appears). But it loses this quickly and inconsistently - what do I do?Message Edited by dlevene on 0-0-200706:34 AM

Power button probs i phone 5

Hi, I cant not turn on or off my I phone 5, the power button wont work, anyone else have the same problem?

If you are within 1 year of having bought it, that should be fcovered under the manufacturer warranty and you can call apple for assistance.

Zen Micro Power Switch Prob

I have had my 6gb Zen Micro for about a month now and have been very pleased. But this morning, to my horror, when I woke up and tried to turn it on the power switch wouldn'work. My Micro still turns on if you put the battery in, and the hold feature still works, but when I shift the switch to the left to turn it on or off nothing happens. I haven't droppped it once or messed with anything in it. I don't know what to do. Has anyone had this problem before? Does anyone have any advice on something to try or what to do?

My Zen Micro has recently developed the same problem. I contacted Support, and they have informed me that I have to pay a $25 fee to get it fixed, and that amount could grow based on the cost of repairs. Quite frankly, I'm upset. This is twice that the player has failed. I RMA'd the first due to a headphone jack problem (which was caused by faulty wiring, which Creative will refuse to admit). This second player has a similar issue. The electronic contacts must not be built/soldered correctly. I will not be recomending this player to anyone I care about, as Creative has proven to have terrible support and exquisitely terrible design. I will not be purchasing another Creative product, due to my lack of confidence in this player. Creative has not even made an attempt to solve my problem, only directing me to the self-guided website that merely showed how unresponsi've their support really is. They have now supplied me with RMA information for my refurbished player, to send into them. I will not likely send this player in. Instead, I'll go peddle the piece of junk off on Ebay, and take the money and put it towards a player that's been proven to be more reliable than Creative's Zen series - an iPod. I know that word is almost a profanity in these forums, but Creative hasn't left me much of a choice. Goodbye Creative, I hope you won't miss my money. As much as I don't like to support Apple, I'm going to now. So enjoy your angered and frustrated Zen users who you don't seem to want to serve. Maybe once you start making quality products again, I might consider buying in.
-A disgruntled former-Zen user.Message Edited by AbandonedHero on 0-30-2006:07 PM

4472 DSA board and Proximity probe

I am trying to read output from the proximity probe using the PCI 4472 DSA board. For the grounded source(proximity probe) the connection given in the 4472 user manual(Page 2-7) is a pseudo-differential one.
The proximity probe(which i am sure is the industry norm) needs -24V power supply, so the +24V power supply is INVERTED to power the probe. The +24V lead become the COMMON and the GROUND lead becomes -24V.
The signal wire goes from 0 to -20V (Range) with respect to the COMMON(24V higher than the TRUE GROUND, since the power supply was inverted and +24V lead of the supply became COMMON for the probe).
According to the specs(signal ground and 4472 ground should not have potential diff. of more than 2.5V) and the pseudo-diff
erential configration I think it will blow the board as the 24V across the 50 ohm resistor will result in 0.5A of current.
Please help. Is there anyway out of this problem.
Thanks,
Vishal

Thanks for your answer Dan, one issue has certainly been taken care of, what is bothering me now is that the potential difference of 24V between the signal and board ground might hurt the board, NI specifies a max limit of 2.5V and certainly NI cannot make a board which is not compatible with the proximity probe(-24V power supply norm), since this board is meant to be used with proximity probes, accelerometers etc.
Looking forward to your reply.
Thanks,
Vishal

Best Method Of Import For Future Preservation

I would like to import all my home movies through iMovie to an external hard drive, but am wondering if that is the best method to ensure that I will always be able to use/access them in the years to come. A couple of questions:
**Does iMovie still preserve and save to the external drive the original format the movie was recorded in? Does it switch it to something that only iMovie can recognize and find?
**What if iMovie quits being made in 10 years or if I switch to a different editing program down the road? Will I still be able to use/access my movies?
**Would it be better to skip going through iMovie and just copy the movies/files directly to the external drive?
Thank you for any info you can give me.
Nkulu

Nkulu wrote:
.. Does iMovie still preserve and save to the external drive the original format the movie was recorded in?
in iMHD≤6: yes, even after editing, the unaltered original video is kept untouched; in iM08 answer is more complicated: the Events store the original data, but it is unable to export without altering it.. And: mpeg2 and AVCHD files get automatically converted.. but into a lossless codec ..
Does it switch it to something that only iMovie can recognize and find?
the .mov digged deep into the file structure of iM (in iMHD6: in the project packages; in iM08: in the Events Folder) are playable without iM..
.. What if iMovie quits being made in 10 years or if I switch to a different editing program down the road? Will I still be able to use/access my movies?
very hard to tell; my experience: cross-app/cross-platform, accessability is .. small. compare with 'opening iMHD6 project with iM08' , or 'transfer iM08 to FCE' .... and those are actual apps from one manufacturer..
.. Would it be better to skip going through iMovie and just copy the movies/files directly to the external drive?
that's why I'm in the process of decision making come back to tape (HDV) - I'm storing about an terabyte of my son's life on video in a simple shoebox.. no copying, backup, no transfer.. as long as I get some service which is able to playback that worlwide standard, I can watch and use those videos..
I often tell that situation: me being on Cuba, running out of 'storage space' ... 7$ and got a new tape, 60min.. imagine that with a fancy HDDcorder.. you need additionally in your travel luggage your Mac, power brick, prob. an ext. harddrive, just for 'emtpying' your camcorder .. honestly: not on MY vacations/my hotel rooms, tents.. ..
and don't tell me '17h recording time' .. IF HiDef camcorder, than FullHD.. which is actually a max. of 3h per device.. and I do record more than 3h on a 2 weeks journey..

2007 Mac Pro disc problems?

Hopefully this could be a quick fix..
My 2007 Mac Pro has started rejecting DVDs I insert for burning all of a sudden. Its worked well until now.
What happens is that I drop a blank DVD-R into the MacPro, close the drive tray and wait for the prog to launch but instead the disk is ejected. I've tried several disks thinking perhaps this one was a glitched disk but nope, it's doing it on all the disks.. However, the same disk will burn properly in my PC. So now I'm having to transfer all my Mac work to the PC so I can burn it.. nice.
Is there anything I can check to see what's wrong with the disk drive on the Mac?
Does the Mac typically prefer a +R or a -R over the other format?
Thanks in advance.
Cheers

Thanks for the link, it will take some digging to find what I need but good info..
I have a 3 yr warranty on this rig, so might as well take it into the shop and let them deal with it (drive replacement).
I tooled around with it last night, thinking maybe the whole drive is pooched but it will read the same -R and +R disk it previously wrote to, and written from other drives, so it's a bit of weird prob.
Not having much luck with anything working at 100% on the Macs I recently bought.. The daughter's MacBookPro has to go back for a clicking sounds which we were told is a power system prob, the Cinema Screen I bought has a couple of stuck pixels and the MacPro has this problem.. The original iMac I bought before all this was so horribly flawed with its fire wire that I returned it and bought the MacPro instead, JUST before the 2008's came out.
Hopefully get all of this sorted out and get some faith back..
Cheers

Help!!! Intel 865P Neo Board

Dear All,
Currently, I've changed my MSI board from Intel 845GE Max-L to 865P Neo Board and seems like I was unable to play games (eg: NFS HP2, C&C General). When I start up the game, after the movies introduction, supposed it will reach the main menu, but it hang there, no display, my monitor power cut off, no sound either. I can't see anything at all.
Everything was running fine, except running games. Should be Intel 865P better than Intel 845GE. Hope you guys can help me solved this problem for me. The BIOS setting is set to default, no overclocking.
I've change my system from:
P4 2.0GHZ
MSI Intel 845GE Max-L
512MB PC2100 (DDR266)
to:
P4 2.53GHz
MSI Intel 865P Neo Board
2X 256MB PC3200 (DDR400) = 512MB
Using the same graphic card:
Hercules 3D Prophet Radeon 8500LE Series (4X AGP Card)
Pls help!!! Thanxs!!!!
?( ?( ?(

Quote
Originally posted by funks
Quote
Originally posted by ernmahkh
Quote
Originally posted by funks
Try forcing your RAM to 266 in the BIOS and see if it works any better..
Any ideas how to do it?? I can\\\'t find any setting for RAM to be set to 266 in the BIOS...
Hmmm, it\'s in one of the menu options (where you can set processor voltage and such)..
There\'s 4 possible settings for it when I looked (266, 333, AUTO, 400)..
Take it off AUTO and set it to 266..
I tried wat you have told me...set to 266MHz
still the same... Monitor power will just cut off. Cannot see anything. Do u guys think is the power supply prob?
I'm using a 300Watt PW. but I was wondering if PW not enough, it will not be able to bootup.

Time capsule, wireless signal goes away

My old TC died last week(power supply prob) and I bought a new 2TB TC. I am having a problem where the wifi becomes unavailable and I need to power off/on the unit to get things working again. Any ideas?

Ok that is actually pretty serious. Did you also lock the channels??
Remember the TC can swap channels at the drop of a hat.. and do it rapidly so clients find it hard to keep up.
DId you make sure the country is set correctly.. in wireless/ wireless network options??
Otherwise I think I would take it back. Get the genius to test it for you.. how long does it take to fall over usually??
Did you also check the log in the TC.. sometimes that is useful?
I am guessing you updated the firmware when you started it.. I would also go back.. the latest firmware is definitely more buggy than previous one which was excellent. Just hold down the options key when you go to the firmware update in airport utility.. and you will be able to pick earlier firmware. For the latest 4th Gen there might only be one or two previous firmware.. go back one only.

Stability Problems with Games, Help!!!

Welp this is the second 3200-64 Newcastle Processor and MSI K8n neo plat MoBo that i have gone thru and still the same problem. I can't play games without my comp lockin up. It goes anywere from just freezeing to completely shutting off. I also get that call of duty problem were it freezes for 2 seconds. I have gone thru 3 diffrent types of memory(Elixer, Kingston, Cosrair), 2 diffrent HD's, WinXP home to Pro, ATI 9800pro to a Nvidia 4200 with no luck. I am useing the bios out of the box and have not bothered updateing because from what i read it hasn't solved the problem. I have spent about $200 on techs trying to fix the dam thing and it still does it. Can anyone please help me. I am about to cave in and buy a diffirent companys MoBo.
AMD 64 3200 Newcastle
MSI K8N Neo Plat.
1gig Elixer Memory
450watt PSU
9800pro 256
If you guys need any more info tell me so i can post.
Thanks in advance.

Not sure about the cause of your prob, but in itself, the 12v amp on that PSU sucketh...
Does your vid card have a separate molex in? Use a separate power connector for it if i has a power in molex (dont connect anyting else to that molex cable set).
Set the vid cooler on "high" setting (isnt there a switch on the back?)
Try using only one stick of RAM in 1. Move it around.
Check the grounding of the psu. Maybe a wire from the case screws on the psu to a mobo fastening screw would help.
Make sure that the AGP card is installed correctly (all the way in). Some cases are somewhat askew, and if you tighten the screws on the cards it lifts the cards out of the pci/agp ports.
Im voting this as a PSU / power related prob. I had similar probs wiht my old Athlon 1200 when i used the 250W psu that came with the case.
On the bright side, youre gonna have a mighty spiffy shiny new computer by the time your done...

Macbook pro keeps crashing (***?-o)

early 2008 macbook pro. starting last August. starts, runs fine, then after a couple minutes (or a couple hours) i hear a soft click sound, then nothing. no display, no power, ~nada~. this is all on AC power (battery ran down long ago and was not replaced).
video (or logic) board was replaced apx. July 2011 by authorized Apple service shop
i don't see anything relevant in console logs, or Sophos. temperature monitor doesn't indicate anything >120oF.
suggestions? it'll boot again, but sometimes not right away...

more info/update:
after running extended hardware test (no errors) and resetting SMC again, used the MBP well for a week. intermittent power-off probs, but system usually boots within a few tries over a few minutes, then runs well for anywhere from a few minutes to quite a few hours.
updated 10.6.8 to Mavericks 10.9.1 a week ago and it's run well, too, but system stills shuts itself down without warning occasionally. then last night while working away i heard the familiar *click*, saw the shutdown, pressed the power on button a few times, heard a *pop* and now the Magsafe seems to be defunct.
am wondering if there's a connection...

Hp dv 9500 power up probs

Similar Messages

Maybe you are looking for