HP Imaging Device Functions causing errors on LAN

I have 4 computers on my LAN. For months now, I have been seeing errors on the Ethernet interfaces of 2 computers (netstat -e). The errors occured at regular intervals and seemed to be asscociated with the HP Printer SW associated with the Photosmart C7280 which was configured as a network printer. (TCPVIEW showed the only network connections being made at the time errors occurred were to the printer.) The performance of the Internet Explorer was poor and as other networking activities such as sending e-mail were very slow.
When booting the machines in Safe Mode with Networking, the errors do not occur and the performance if IE was significantly better. I finally got around to investigating this. My first attempt was to turn off all printer shareing to stop communciation between machines. This made no difference. However, as soon as I uninstalled HP Cutomer Participation Progam 10.0 and HP Imaging Device Functions 10.0 and restarted , the errors completely disappeared. IE 8 ran like a charm and email clients stopped reporting errors when sending. I suspect the problem is related to the Digital Imaging Device Functions but I am reluctant to reinstall lest the problem reappear.
Does anybody know the root cause?

After further investigation, I have narrowed this problem down to the Pml Driver HPZ12 service    By disabling this service and rebooting, the problem with errors appearing on the LAN interfaces go away and browsing the Internet is fast.
Along the way I noticed several things.   This problem may be related to the specific Windows Version or aggravated by other SW installed that uses the network.   I installed the complete suite of All-In-One Printer SW (V 10.0.1) on a freshly installed and updated XP Home Edition (SP3) machine with no other SW installed and  no errors occurred on the LAN interface even when I left the system running for days.      However, I un-installed and re-installed the same SW on an XP Professional (SP3) machine which has AV SW, Skype and other SW that uses the network and the errors appear as soon as the Pml Driver Serv ice starts after booting. If I disable the Pml Driver Service and reboot, there are no errors.   Now here is the weird part.    If I manually stop/start the Pml Driver Service, I do not seem to get the errors.
If the Pml Driver service is enabled so that it starts automatically, you get the errors, but typically the count grows to between 50 and 100 and then stabilizes.   However, if a program like Skype (which also uses UDP) starts automatically at the same time the Pml Driver service starts, then you get many more errors and the number keeps growing over time. My guess is that the Pml Driver has a bug in its initialization but I cannot guess what it might be?   Port conflict?

Similar Messages

Hp imaging device function 8.0 can it be deleted

I have a deskjet d1420 printer i had to reinstall windows... do i need the hp imaging device function 8.0 or can i unstall it via add/remove ?? (programs/features)i have no scanner just the printer and a hp webcam ... using win7

After further investigation, I have narrowed this problem down to the Pml Driver HPZ12 service    By disabling this service and rebooting, the problem with errors appearing on the LAN interfaces go away and browsing the Internet is fast.
Along the way I noticed several things.   This problem may be related to the specific Windows Version or aggravated by other SW installed that uses the network.   I installed the complete suite of All-In-One Printer SW (V 10.0.1) on a freshly installed and updated XP Home Edition (SP3) machine with no other SW installed and  no errors occurred on the LAN interface even when I left the system running for days.      However, I un-installed and re-installed the same SW on an XP Professional (SP3) machine which has AV SW, Skype and other SW that uses the network and the errors appear as soon as the Pml Driver Serv ice starts after booting. If I disable the Pml Driver Service and reboot, there are no errors.   Now here is the weird part.    If I manually stop/start the Pml Driver Service, I do not seem to get the errors.
If the Pml Driver service is enabled so that it starts automatically, you get the errors, but typically the count grows to between 50 and 100 and then stabilizes.   However, if a program like Skype (which also uses UDP) starts automatically at the same time the Pml Driver service starts, then you get many more errors and the number keeps growing over time. My guess is that the Pml Driver has a bug in its initialization but I cannot guess what it might be?   Port conflict?

Filter on evaluate/db function causing error in OBI report

Hi,
I unable to filter the report on EVALUATE function shown below
CAST((Evaluate ('work_days_between_ADS (min(%1 ), max(%2))' as INT, "Order Attributes"."Booked Date" , "Line Level Attributes"."Line Status Date" )) AS INTEGER) >29
above code is one column out of about 20 columns and report is working fine without filter but I want to see the data with work_days >29
I got below error with above filter condition.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 17001] Oracle Error code: 604, message: ORA-00604: error occurred at recursive SQL level 1 ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at line 8 ORA-00934: group function is not allowed here at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
If anyone of you know solution for the above please post it here. appreciate for your help
Thanks
Jay.
Edited by: JV123 on May 9, 2013 9:24 AM

Hi Jay,
As you are getting an ORA- error, there is nothing wrong with the OBIEE report or with the fact that the you have used Evaluate in the filters.
This seems like an error while parsing a particular row value for the parameters (Booked Date and Line Status Date) you are passing to the work_days_between_ADS function. Pick up the physical sql and fire it directly on the database and try to identify what values are causing the error (probably at line 8 of the function def).
Thanks,
Gaurav

HP Imaging Device Functions

Officejet 4500 - G510g
error 0x00000570
Tried downloading software from HP site, along with updates and diagnostics and still unable to use my printer. Any suggestions?

Hi @Ingerst,
Welcome to the HP Forums!
I understand that you are getting the message "error 0x00000570," on your HP Officejet 4500. I am happy to look into this for you!
As I saw in your other post, you are using Windows Vista with a USB connection right? If not, please reply with the Operating System you are using and the version number. If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Where do you see this error? On the computer during the install? On the printer? When you are scanning/printing?
Does it say anything else beside the error? Such as: ie: "Fatal Error" or "Problem with printer or ink system"?
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Getting "HP imaging device not found" error when trying to use the scanner in mountain lion. Anyone else have this problem?

The odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
Steven

The odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
Steven

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Bug Report : Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error. "Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)

Windows 8 backup (Win7 File Recovery system image) creation to NAS device fails with error 0x807800C5

Hi,
I have a ZyXEL NSA310 NAS device on my network that I use for backups (as well as a media server). I have been very happy with it as, amongst other things, it has a gigabit Ethernet connection. I recently upgraded my home laptop from Win7 Pro to Win8
Pro. Under Win7 the NAS device worked perfectly as the backup target. I could back up file sets and - most importantly to me - create a system image on the device should I need to restore the system in the event of a full disk failure.
When I upgraded to Win8 it kept the Win7 settings and it looked like it was just going to work, then as it came to create the system image it failed with error code 0x807800C5 and message "The version does not support this version of the file format".
I have searched the internet and seen that others have had similar issues on Win7 and Win8 with NAS devices where they have had to hack the device to get it working - though it isn't clear that this has been successful for everyone. This isn't an option
for me as the NSA310 is a closed device and in any event I don't see why I should have to hack the device when clearly this is a Win8 issue (since Win7 worked perfectly).
Does anyone have any ideas how to fix this issue so that I can create the full backups I require?
Thanks,
Phil
Event Log messages:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          13/01/2013 23:14:52
Event ID:      517
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Home-Laptop
Description:
The backup operation that started at '‎2013‎-‎01‎-‎13T23:13:43.523158000Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a
solution, and then rerun the backup operation once the issue is resolved.
Log Name:      Application
Source:        Windows Backup
Date:          13/01/2013 23:14:56
Event ID:      4104
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Home-Laptop
Description:
The backup was not successful. The error is: There was a failure in preparing the backup image of one of the volumes in the backup set. (0x807800C5).

Thanks willis! I will look into the iSCSI route. A quick Google search and I can see some mention of the NSA310 and iSCSI so maybe it does support it.
One question: Have you ever attempted to restore a system image from a NAS iSCSI device with a Win8 Restore Disk? Is it easy? I just want to be sure that it is possible to do so in case the worst happens and I need to restore the entire image onto a
new disk.
Hopefully Microsoft will fix the issue with the standard NAS setup with an update in the future, but I don't want to wait for it.
Thanks again,
Phil
Hi Phil, No I have not had to do this yet, but I see no reason why it shouldn't work as the iSCSI disk looks just like a regular hard disk to the OS. I agree that Microsoft should fix the direct NAS support as the iSCSI approach does have the downside
of dedicating a fixed chunk of your NAS drive to the iSCSI disk that you have to choose when you create the disk whereas the direct NAS just uses the actual space currently needed by the backup. Also I had some trouble getting authentication (access rights)
to work so I left the iSCSI portal as open access - which is OK for a home solution but not a good idea in general. I will revisit this for my own setup and see if I can get it working but just wanted to mention it in case you have the same issue. It manifests
itself as not being able to connect to the iSCSI portal due to failed authentication when running iSCSI initiator setup.
-willis

Solaris 10 on Sun Ultra 40 --PCI system error on /bus/device/function 0048h

Everytime I boot to Solaris 10 (08/07) I get the following message at the top of my screen:
PCI system error on /bus/device/function 0048h
The system boots up successfully, but I find this error to be particularly annoying. I have no third-party cards plugged into any PCI slot.
Why am I getting this error. Is the BIOS just giving me a bogus error?
Any help would be appreciated.
Thanks.
Robert

Hello,
I even got the same Problem with an Ultra 40. After powering off and on the system during the last 3 days, now i got an error mesage, "CPU3 can not be started"
cleared the CMOS and now i am back on "PCI System Error on Bus/Device/Function 0048h" the system is running with the latest 1.7 Bios update.
First of all I tried to flash the system back to an lower version but the flashsoftware seems not to support this operation have to make own boot media with the flashprogramme and flash by forced the 1.0 or 1.2 version.
regards
Monchichi

Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the las

Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the last 5 hours. LR 6 has a serious bug. Anyone else experiencing this problem. Yesterday I was on tech support, waiting for 3 hours, finally they picked up and informed me there department was closing and someone else would call me on Monday. So, I'm working today and all day Sunday to make up for the down time using LR 6.
I don't know if the bug exists in the program or the "Creative Cloud.
Question: Does anyone know why if I bought Light Room 6 [NOT Light Room CC with the monthly rental], I have to enter my serial number if I want to use it?

Entering the serial number is probably part of the registration process.
Just out of curiosity, what were you doing on LR6 when the folder of images became corrupted?

HP Officejet Pro 8500 A909G – The HP Imaging Device was not found

I have a HP Officejet Pro 8500 Wireless A909G. My operating system is Windows 7 Home Premium 64bit that was upgraded from the original Windows Vista 64bit that came installed on my HP Pavilion Elite m9400t CTO Desktop PC.
After performing the Windows 7 upgrade I installed OJP8500vA909_Full_13 to support the 8500, and everything worked fine.
I recently noticed that the scanner function had stopped working from Solution Center, and uninstalled V13. I downloaded and installed OJP8500vA909_Full_14. The install completes without error, but then I get scanner error “The HP imaging device was not found” with extended error code 8, [(1,0, -2147221164)].
I have performed all the suggested Solution Center steps to resolve the error without success. Including:
1) Updated the firmware to OfficejetPro8500A909g_R1006B_ENG
2) Ran OJP8500vA909_Corporate_Scrubber_14
3) Uninstalled all programs, deleted %temp% files, and changed the startup using MSCONFIG.
4) Deleted all other imaging programs including camera software, and reinstalled.
5) Performed HP Update and installed network fix.
I have performed these steps many times and keep getting the same error. The scanner works using the front panel function “Scan to network folder.
Please help.
This question was solved.
View Solution.

First of all, i am sorry to hear your having a problem with your Scanning Feature on your PC. How is the computer and printer connected together?
Please download and run the following tool. This is what we call the HP Scan Diagnostic Utility. After downloading and running the tool, can i have you reply with the problems (if any) it finds. Thanks so much!
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-96509-1&cc=us&dlc=en&lc=en&...=
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an HP Employee.

HT204074 The "Manage Devices" function not found in iTune

I cannot find the "Manage Devices" function in the iTune Account Information screen. Any help?

The Function not found error is thrown when the OS can't provide the pointer to the function in the library to LabVIEW for some reason. For more information and common solutions see:
http://digital.ni.com/public.nsf/websearch/44E40ACF1644DB77862562990054D672?OpenDocument
The only reason I can think of why the first time it works correctly is that the DLL is not correctly clean-up by the close functions. Thus causing a second request for the pointer to fail due to this. (closing LabVIEW will remove the DLL form memory and thus probably clearing the error).
Hope this Helps
Kind regards,
Karsten
Applications Engineer
National Instruments

Failed intialize core device got a error whil installting solaris9 through

Hi All
iam setuping jumpstart server, i have downloaded free version solaris 10 x86 and i installed
and i configured,config9(configurations) rules ,profile sysidcfg, hosts evry thing i configured when i run ./check script it is working fine
server is dell mechine(solaris 10 x86 )
client model is solaris sun-blade1000 mechine
and i have taken cd images to the server(normal image not flash archive)
it is working fine when i run add_client_script .
when i run boot net - install from client mechine in the ok prompt
i got a below error please help me in this ,this is very high priroty taks
configuring devices /dev and /devices
F
Fatal error
failed intilize core devices
/usr/openwin/bin/xinit: core devices interupted system call error No:4 unable to connec to server
/usr/openwin/bin/xinit:no such process (error no :3) server error
and then it is comming to the command prompt
i got above error please help me
my mail is :mmuralica78@gmail com
Note : while installing solaris 10 sparc ,it is working fine
iam facing problem solaris9 and solaris 8 for sun blade 1000 mechine
Thanks
Murali M

You need to move to 12.1(19)EA1 or later and this problem will be resolved. This is a problem in the IOS not supporting the ENTITY-MIB.

Premiere CC 2014.1 Blu-ray MPEG 2 export causing error in Sony DVD Architect Pro

I've filed a Bug Report for this but wanted to post here in case it helps anyone else or on the off chance someone can give me a solution / better work around.
Something has changed in the results of a Blu-ray MPEG2 export from Premiere 2014.1 vs those of the previous CC version. The result is that my authoring software of choice, Sony DVD Architect Pro, fails to prepare a disc image giving an error in the final stage of preparation. This workflow has been working fine for 2-3 years.
My work around is to export to original format (mxf / XDCAM EX HQ) and then go back to Media Encoder CC rather than 2014 to produce the Blu-ray MPEG2 file, which works without problem.
Here's a copy paste of my bug report in case anyone with a similar setup has an opportunity to replicate (I'd be very grateful to anyone able to confirm whether its a bug or something specific to me that I might be able to fix).
******BUG******
Export from Premiere 2014.1 directly or via Media Encoder of MPEG 2 1080 50i Blu-ray files causes error in preparation of Blu-ray disc in Sony DVD Architect 5.2.
This error does not occur when using the same Media Encode export preset in the previous version of Premiere Pro CC / Media Encoder.
Steps to reproduce bug:
1. Export Sequence from Premiere
Export, in my case XDCAMEX 1080i HQ, using a media encoder MPEG 2 Blu-ray preset:
Preset Name: HD 1080i 25
Format: MPEG2 Blu-ray
Bitrate Settings: Medium (Target 25Mbps)
2. Create DVD Architect 5.2 project
Set up as single movie Blu-ray project in DVD Architect:
Disc format: Blu-ray Disc
Resolution: 1920*1080
Framerate: 35 interlaced
Choose the file exported from Premiere
3 Prepare Disc
- Select Make Blu-ray Disc
- Click Prepare
- Choose Location of iso
- click next then finish
Result
Around 50% - 60% through the process the following error is displayed:
An error occurred while preparing compilation
Details:
File name: STREAM/00000.m2ts
Status: TSWrapper.dll::CTSWrapper::ProcThreadMain::Failed to read ES file. - The ES file may be shorter than the size described in the MUI file.
Expected results:
A shiny ISO ready to be burnt to disc and sent sent to eager customers.
Its taken me a full day and a half to isolate problem - someone remind me why I fall for the software updates every time?!
Cheers
Iain
Other details:
Windows 7 pro 64 SP1
Intel Core i7 950 @ 3.07GHz
RAM 24.0GB
ASUSTeK P6T DELUXE V2
1279MB NVIDIA GeForce GTX 470

There is a known bug in the H.264-Bluray export. I assume it has nothing to do with your issue, but perhaps it will give you something to consider.
https://forums.adobe.com/message/6848505#6848505
It appears due to a malformed xmpses file. It creates a problem on import into Encore, and I think it should do the same upon import into Architect or it would be ignored entirely. The test is to delete the xmpses file and see if that avoids the issue.

Changes in RPCBURZ0 causes errors in other programs

Hello to All,
I made changes to RPCBURZ0 in order to extend the TABLE schema function to read a custom Infotype 9001.
I added the necessary code in RPCBURZ0 and the data definition in RPCFDCZ0.
The code is working perfectly , but the changes are causing errors in other country specific reports
specifically in : HINCALC0 , HCNCALC0 , and HKRCALC0 and Transports to Quality generating errors.
Error is because the custom infotype definition is not seen in these reports.
Generation of the users of the transported Includes                                                                                |
Program HCNCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HINCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HKRCALC0, Include RPCBURZ0: Syntax error in line 000021
       |   The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Looking at other H--CALC0 reports i could easily spot an include for RPCFDCZ0.
include rpcfdcz0. "customer-specific data declaration (int'l)
I wonder why this include is not in (HINCALC0 , HCNCALC0 , and HKRCALC0) !!!
I have two solutions in mind :
1. Make a custom ZRPCBURZ0 and include it in the main report.
2. Look for user exist for the three reports and add the data definition statement .
What is the best way to fix this situation ? and is there any other possible solutions ?
We are using :
   SAP ECC 6.0
   Payroll International Driver.

Alex Gorly and Matt Sullivan solved one of my issues above:
Message: Attribute 'prod' is not declared for element 'prodname'
I'm still stumpled on the other one:
Message: Not enough elements to match content model '(prodname,vrmlist,((brand|component|featnum|platform|prognum|series) )*)'
As stated above, I've even removed everything from the general rule of <prodinfo> except prodname and I'm still getting the same error. I've searched everywhere for this general rule and <prodinfo> is the only place I can find it.
What I really want is: (prodname), (vrmlist)?, (brand | component | featnum | platform | prognum | series)*
so that vrmlist is optional.
No matter what I do, unless I include a vrmlist, I get the above message. Currently, our CMS can't handle vrmlist but I don't want to remove it altogether because we may be replacing our CMS.
Help please!

HP Imaging Device Functions causing errors on LAN

Similar Messages

Maybe you are looking for