Hp officejet pro 8600 plus will print but won't scan.

Recently I had some kind of software conflict with my printer in Windows 7 so I deleted it and reloaded the printer software. I selected enable scanning at set up. It is a network printer and everyone can print to the printer. When I went to scan today the printer sees my computer and will let me select scan but I get a screen error on the computer and then the printer says the scan was unsuccessful. I checked the IP address which of course is good.
The Error says "Scanner Unreachable" X Scanner communication cannot be established. Ensure your product is powered on..... If you are installed using a cable check it...... If you insalled this printer by IP address then you might need to update IP address....... If you are running firewall software, it may be blocking the scan communication. Go to HP.com/go/wirelessprinting for help. -"
I turned off my firewall and my virus software and I get the same error. I restarted the computer, router, modem, and printer a couple of times. The frustrating thing is the printer sees the computer from the touch screen but just won't complete the scan.
Any suggestions?

Hi AccessRE,
Please let me take a moment to say "Welcome" to the HP Forums. I hope you enjoy your experience!
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having an issue scanning to the computer over the wireless network. Please click on the following link for A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
Please write me back if you are still having issues.
If I don't hear back from you today, I hope you have a great Monday.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

HP OfficeJet Pro 8600 Plus will print wirelessly but not scan

I have a HP OfficeJet Pro 8600 Plus all in one printer/copier/scanner. It's worked fine for the several months I have had it. But now suddently the computer does not recognize the scanner. I am connected to the device wirelessly and can print but not scan. I haven't been able to figure out why the comptuer recognizes the printer but not the scanner. I uninstalled and reinstalled the device but still no success.
Any ideas how I can get the computer to recognize the scanner? I am running Windows 8. Have not updated to 8.1.

Hello Sarah1234, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scanning issues. I would like to help.
I would recommend powering off your printer and computer. Once they are both down, I would recommend unplugging the power from your wireless router for 60 seconds, and then plugging it back in. Once it has begun broadcasting again, power on your printer and computer.
I would also recommend downloading and running the HP Print and Scan Doctor. Once you have launched the tool, select the 'fix scanning' option.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet Pro 8600 Plus "unspecified printer problem"

I just set up my HP Officejet Pro 8600 Plus e-All-in-One. The set-up seemed to go okay, but when I go to the "devices" tab for "HP Connected" it has a yellow yield sign and says that I have a problem with my printer. When I click on the yield sign symbol, the box says that "An unspecified problem was reported. Please check your printer." When I check the printer pannel, there are no problems reported. The machine seems to print okay, but I'd like to clear up this error that is shown. Any ideas?
Also, I've already done the restart and sign-off/sign-in stuff, so we can move on to second-order trouble shooting. Thanks.
This question was solved.
View Solution.

HELP!
I am having exactly the same problem. I am simply swapping out an existing Deskjet 3512 that worked perfectly at all levels, so i KNOW i dont have router/port/network issues. eprint was and is flawless. I just plugged it back in to check and it still works just fine with eprint.
Using my new Pro8600, I send emails to my eprint address and they seem to go...and then nothing. they just don't print.
I get the"Officejet Pro 8600 Plus "unspecified printer problem"" message but my front panel reports no issues.
I'm a step away from taking this back and buying an Epson.
My experience with their support has bee stellar at a commercial printer level.
This seems to be a very common problem and I just dont have hours to monkey around with something that should work out of the box.
any help will be appreciated.

How do I get the HP OfficeJet Pro 8600 Plus to print only black or grayscale? What is the procedure?

How do I set my HP OfficeJet Pro 8600 Plus to print only black or grayscale? What is the procedure?

Hi, Looks like you have to do this from the aplications. Here is the procedure from its manual, page #36: 1. Load paper in the tray. For more information, see Load media.
2. On the File menu in your software application, click Print.
3. Make sure the printer you want to use is selected.
4. To change settings, click the button that opens the Properties dialog box. Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences.
5. Change the paper orientation on the Layout tab, and paper source, media type, paper size, and quality settings on the Paper/Quality tab. To print in black and
white, click the Advanced button, and then change the Print in Grayscale option.
6. Click OK.
7. Click Print or OK to begin printing Regards.

Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

Hi All,
I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is
100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

Not a reply but another plea for help.
There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
-Printer bought about 2~3 weeks into Sept 2012
-Installed onto Macbook Pro running Lion (full updated at that time)
-Both wireless scanning from printer to computer and initiated from computer worked fine.
-Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
-Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
-Somewhere along the line it stopped communicating with my MBP
-Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
-Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
-Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
-Reinstalled HP software from disc.
Still didn't work.
-Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
8600 doesn't list my MBP as available computer to scan to
[But all the test pages done whilst in HP Utility, and others, get sent through]
Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
Hrumph
Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
Thanks,
Mike W

HP Officejet Pro 8600 Plus will not print from my MacAir

I have used my MacAir to print on my HP Officejet Pro 8600 Plus for about 5 months without any problems. All of a sudden my printer will not print. The wireless icon says it's connected to the network. But when I click print it says "looking for air printer" and then "printer not connected". I've repeated the Wizard Set Up for the wireless connection. I've turned the printer and computer on and off. I've even tried printing from my iPhone but it will not find the printer anymore. Please help!

Hello @ladybonds ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
You are saying that you have been printing fine from your computer for 5 months and now your printer says it is connected to the network and your computer says that it isn't.
Have you recently upgraded to Yosemite the new Apple OS? If not what OS X are you using?
Are you sure that the printer and your devices are on the same network?
Does the router give your printer an I.P address?
Let me know these answers and we can go from there.
I worked for HP.

HP Officejet Pro 8600 Plus will not print the attached file in the e-mail

Dear support team,
I have installed the software and setup HP eprint according the manual respectively the advices in HP-Connected however if I send an e-mail to [edited by Moderator] the printer 8600 PRO PLUS will not print the attached file in this case a PDF. But the text inside the e-mail will printed.
Any recommends?
Thank you in Advance.
Best regards
Conny

Hi Conny,
Welcome to the HP Support forums. I understand that the attachment to an email sent to your Officejet Pro 8600 Plus printer’s ePrint email address did not print.
After the PDF didn’t print, did you log into your HP Connected account? I’m curious as to what HP Connected indicated about the print job. I have included the ePrint Job Did Not Print document. It has several causes and solutions as to why the PDF didn’t print.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Officejet Pro 8600 Plus will not copy even after hard reset

HP Officejet Pro 8600 Plus on Windows 8 OS
Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
HELP!!
This question was solved.
View Solution.

Hello,
Please check your private message inbox for the reset I'm going to send you.

Hp Officejet Pro 8600 Plus network printing problems

I hard wired my Hp Officejet Pro 8600 plus with an ethernet cable to my router to enable other computers on my network to print to my printer. Several problems have resulted because of this:
1. I cannot find my printer in the Device Manager: it shows as an "unknown device"
2. Sometimes pdf files will print and sometimes they will not. Word and Excel files sometimes print, and sometimes don't.
3. Sometimes documents will spool, but then I get the following message: "Unable to communicate with printer." Then it asks me to make sure all cables are connected and power is on, which is the case.
I have tried all kinds of troubleshooting with information found in Hp forum and on Hp website. Finally, using the HP Print and Scan doctor, I deleted and reinstalled the printer and updated the Full software and drivers. Then I got a message saying "the printer is on your network, but the network software is unable to find it using the typical network discovery method. You can install the printer and operate it normally over the network using the IP address of your printer." I inserted the IP address and it took me through various steps to final installation. I typed a short message into a new document on Microsoft Word and it printed, Then I tried to print some information from the HP website, but this did not print; it didn't even spool.
My router is not detecting the printer on the network either, the light on the port bearing the network cable connected directly to the printer has never been shown to be on, like the other lights. I have been struggling with this for the last several months.
I have an Hp computer, running on Windows 7 Ultimate (64bit). I prefer to use my printer over a network ethernet cable instead of wireless. Please help!

techlearner3 wrote:
My router is not detecting the printer on the network either, the light on the port bearing the network cable connected directly to the printer has never been shown to be on, like the other lights. I have been struggling with this for the last several months.
I believe this is the cause of your problem. First, try another known working port in the router. Next, change the Ethernet cable with a known good cable.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

OfficeJet Pro 8600 plus will not install , msg Call to DriverPackageInstall returns error 5

I get message "Call to Driver Package Install returned error 5 for package -c\Program Files\HP\HP OfficeJet Pro 8600\Drivers Store\Pipeline\hpup\03.inf-Call to Driver Package Install must be a member of th eadministrator group to install a driver package. Laptop is HP, Core 5, running Win 8.1
No security messages arose during very slow install.
Tried several times, tried to download installation package as suggested btroubleshooter but aborted 4 times (4 hours), other downloads had no problem. Tried changing startup as indicated also, did not correct the problem.

Hi Liam,
The installation CD that came with your 8600 will definitely not work with Windows 8.1 and is not same as the latest online download which you will need to install on Win8.1.
Are you running Win8.1 Pro 32 or 64 bit?
Also make sure you select the right model of your Officejet. There are 3 different models.
HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911
HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
HP Officejet Pro 8600 e-All-in-One Printer series - N911
HP Officejet Pro 8600 e-All-in-One Printer - N911a
HP Officejet Pro 8600 Premium e-All-in-One Printer series - N911
HP Officejet Pro 8600 Premium e-All-in-One - N911n
Try uninstalling printer from the control panel and reinstall using the Win8.1 download from the link above.
Thanks

Officejet Pro 8600 Plus wont print from Mac 10.5.8

Hello,
I just purchased the Officejet Pro 8600 Plus and I'm running it wired through my router. I'm able to print with my PC, my IPad and my phone but I cant print with my mac running OS 10.5.8.
When I try to print it puts the document in the print que and says "printing" but nothing happens at the printer. I can scan to my mac from the printer and everything seems to indicate that the printer is connected.
I have downloaded the latest HP driver for Mac 10.5. Also i have reset the printer (holding down the option key while deleting the printer from the system preferences) several times and re-added the printer. Still nothing.
Any ideas?
Greg

Reset the printing system:
- Go to System Preferences > Print & Scan
- Option click the '+' sign and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro 8600 Plus wireless printing dilemma

Hello,
I recently purchased the Officejet Pro 8600 Plus for my dorm room in college. However, the school requires all devices that want to use its wi-fi to register their IP addresses through detection software in addition to the default log-in information just to use the wi-fi. Now, here are the items I currently have:
- the printer itself
- the printer USB cable
- a few ethernet cables
- a personal router
- an ASUS wireless dongle (plugs into PCs via USB, has ethernet port but the device itself can create a hotspot and its own "network")
- one of the built-in school routers (high up on the wall)
The question is, is there a way I can set up any type of wireless printing in my dorm room? Is it possible to buy two wireless USB attachments that hook up wirelessly to my printer and computer, acting like bluetooth? Thank you!

Range extender improves the signal strength and cover a bigger area, but adds an extra layer of communication so will have slower response. It helps connecting devices far apart, but may cause delay and "loss" of communication, especially "two way" communication which is the problem you are experiencing.

Officejet Pro 8600 Plus copy prints with black streaks

I just bought an HP Officejet Pro 8600 Plus and it seems to work great at printing; however, when I tried to copy something, the copy came out with black streaks that nearly render the print illegible and are the most dark/condensed towards the left hand side of page.
How do I fix this problem?
This question was solved.
View Solution.

Hi,
It could be due to the scan calibration issue during power on.
Power off the Printer, make sure scan lid closed properly. Now power it on, it will do scan calibration.
Now try to do the copy and see the results.
Hope it will help you.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

HP Officejet Pro 8600 Plus only printing blank pages

Hi, My HP Officejet Pro 8600 Plus currently only prints blank pages.I've gone through the following troubleshooting steps-Soft reset-Hard reset-3 levels of print head cleaning-Replacing ink When I try to realign the print head, an error pops up saying that there may be a jam, but I cannot see anything blocking it... I know the printer is out of warranty, but if there are any other troubleshooting steps, please let me know. Product Number: cm750a Kris

Hey there Kris, Welcome to the forums! I read about how your Officejet 8600 Plus is only printing out blank pages, and I'd like to help! I have a few ideas in mind that you could try and I hope they work! You mentioned that you are seeing a "jam" error, so I would like you to try out these guides:A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 e-All-in-One Printer SeriesA 'Carriage Jam' Message Displays for HP Officejet Pro 8600 e-All-in-One Printer Series (N911) Please try making copies afterwards and if the copies work, try printing. Let me know the results!

Hp officejet pro 8600 plus stops printing in the middle of printing

I have the HP Officejet Pro 8600 Plus, it is setup wireless. It will print fine sometimes then it will print half of a page then pause or stop ???? I am using my IMAC computer. Has anyone had this problem, I am wasting too many sheets of paper.

yes, I have the same problem... and as I print many Invoices at a time, it really slows things down. It is wireless as well. It never did this at the beginning. It's only a month old.... where's the fix please HP!!!!????

Hp officejet pro 8600 plus will print but won't scan.

Similar Messages

Maybe you are looking for