HP OfficeJet Pro L7590 want to use wireless

I have a HP OfficeJet Pro L7590 (all-in-one) want to use it wireless.
I have an Apple Macbook laptop (mine), and an IBM thinkpad laptop (from my company that I keep with me).
How can I use the all-in-one wireless with both laptops - what equipment do I need and where can I find it?
Thanks
Judy Uridge
This question was solved.
View Solution.

You need to have wireless router if you want to connect both wirelessly. The printer has no built in wireless radio so you need to connect it to the wireless router using a LAN cable. And before you can do this, you need to setup your own network first. You need to call your router manufacture or your ISP to setup your own wireless setup network.
For addtional information on setting the printer up on the network, you might find this link useful.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00750079&lc=en&dlc=en&cc=us&lang=en&rule=459&pr...
Please click on KUDOS if you find my solution helpful.

Similar Messages

Is the hp officejet pro L7700 able to use wireless direct printing?

i am trying to set up a printer and for some reason cannot using all the usual suggestions as it is not recognized sin the installation set up.
dah76

Hi,
Wold you like to setup similar to this ?
If yes, please follow instructions from this book (Ch 5, page #19):
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

OfficeJet Pro L7590 - wireless printer issue

Hi,
I have a 2008 OfficeJet Pro L7590 printer. I'm just now trying to get my printer to print wirelessly and I'm having multiple issues. I lost the disk for installation, but downloaded the installation via hp.com/support
After installing it, I tried to connect it wireslessly. On the final step, it says "
Unable to communicate with your printer. Not all diagnostic tests could be performed. Check cable connections and then retry."
I've checked all my cords and everything and they are plugged in correctly! BUT here's the thing. When I go to my start menu, and click control pannel → network and then click on a tab, such as "Network and Sharing Center, Connect to a Netowk, or set up a connection or nework. The window absolutely freezes and I'm not able to click on it at all. Also, I don't see a wireless conection icon on the bottom bar, right corner. (not sure what that's called) All i see are two computer screens and a red X ontop of them (icon)
I really need to connect my printer wirelessly, so I can use my phone, ipads and ipod touches! Please help. I've spent so many hours trying to figure this out!
HP doesn't offer me anymore help because it's out of warrenty

Hello iAliciaa.
I understand you are trying to installing your Officejet L7590 and you are receiving a message indicating "unable to communicate
with your printer". Are you connecting this printer Ethernet or wireless?
Please follow this entire HP document if you are connecting your printer using an Ethernet connection: Printer Is Not Found During Installation.
I understand completely what you are talking about, but could you verify what type of Operating System you have?
Click on this website to find out: Windows.
Look forward to hear from you.
Ashley
I worked on behalf of HP.

Can't get Officejet Pro 8500A to print using a Bigpond wireless network

I phoned Bigpond for assistance and was told that the HP OfficeJet Pro 8500A needs to use a wireless router. Is this the case? I reinstalled the HP software on the computer but when I selected the Router/Wireless connection wasn't able to detect the network, even though I was logged on to Bigpond. Would appreciate assistance please.

Hi Ruski,
Wireless is just one of three ways you can have the printer attached for printing from your computer. I am unaware specifically what Bigpond is, however a few questions would narrow down which connection type would be optimum:
What devices do you want to print from?
Do you have an established wireless network at your home/business where the printer is?
Are you wanting to use the web services of your printer (ePrint, AirPrint, or Print Apps)?
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Wireless scanning problem HP Officejet Pro L7590 on Windows 8.1

Updated my Sony VAIO to 8.1 which hosed my wireless scanning feature on my HP Officejet Pro L7590 all-in-one. Reinstalled all the drivers, printing fine but not scanning. Please help. Thanks!

Hi,
Please download and run the following tool on your Sony:
http://ftp.hp.com/pub/softlib/software12/COL50849/mp-135113-1/HPPSdr.exe
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Officejet Pro L7590 won't print correctly after it sits a few days Windows Vista USB connection

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
Thanks for any help

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

HP Officejet Pro L7590 won't print correctly after it sits a few days

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
thanks for your input

Hello pcmtgrl
Which model of the Officejet 8500A series do you have? Typically you can find it inside the printer where you change the ink cartridges. Example: A910g, A910a, etc.
Has anything changed recently since the problem started? Is the printer plugged into a wall outlet or a surge protector? Do you have the latest firmware installed? I also suggest running the HP Hardware Diagnostic Utility. Let me know if it finds anything out.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP Officejet Pro L7590 Printer - HP Solution Center does not work

I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.

Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP OfficeJet Pro L7590 network printer

I just upgraded to v4.2.1 on my iPhone 4 and tried to use the new feature, AirPrint without success. My printer is linked using cat5 cable with my wired and wireless router and can be used with about 3-4 pcs within my family. I searched some articles and understand only a couple of HP printers can use this feature. How come Apple spend so much effort for a couple of printers of single company? I never imagined it becomes true. Did I misunderstand this feature? Thanks!

The Officejet Pro L7590 unfortunately will not be updated to support AirPrint. Check out my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0] thread for some other options.
Just trying to help.
Andrew

Hp officejet pro l7590 windows 7 32-bit install fails

I have downloaded the HP Officejet Pro Full Feature Software and Driver for windows 7 (32-bit) for my Officejet Pro L7590 connected by USB cable to my computer. I right-click on the downloaded software and select "Run as Administrator". The installation hangs at step 7 of 8 and then shows me that the L7590 printer driver failed to install. When I look in my "Printers And Devices" I see the HP L7590, but right-clicking on it only shows scanner functions (no printer options). And no option to remove printer.
I have tried uninstalling the HP Software and reinstalling the HP Officejet Pro Full Feature Software and Driver as well I have tried installing the HP Officejet Pro Basic Print and Scan Driver from HP, all with the same failed results.
The only way I am able to use the printer is to uninstall all HP software and simply plug the USB cable to my computer. Then a printer driver is loaded and I can print. The problem is that I do not get the "Solution Center" functionality which I need for scanning.
Any help is greatly appreciated!
Thanks,
Lou

Just so we get off on the right foot, I am going to have you run through the un-instillation and re-installation of the printer again, but in a thorough and managed way. I would like to ask for information's sake if the PC you are using is a HP computer or another manufacturer. This may be useful in future steps if they are necessary. We will want to remove the PnP drivers (the ones that automatically loaded) as well.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3643...
Install that and let me know the result!
Have a great day!

HP Officejet Pro L7590 to be "AirPrint" enabled

How do i configure my HP Officejet Pro L7590 to be "AirPrint" enabled so my iPad will print to it? Using Windows XP on laptop

The L7590 does not have the ability to set up a customized email address, because it does not have web services (including ePrint) built in.
However, the printer does support using the HP ePrint mobile app which allows one to print from a mobile device using the app to a printer on the same network. Thus, if the L7590 is on the same network (ethernet/wireless) as the mobile device and the device has the HP ePrint mobile app, then one should be able to print through this manner.
For more information see the document located here.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Officejet pro L7590 always goes offline on my hp pavilion

My HP Pavilion notebook is "wirelessly hooked" to my wireless router (mororola). my hp officejet pro L7590 is also physically tied to my wireless router (not using the printer wireless). When i install the printer, my computer recognizes the printer on the network/wireless and allows me to install using the appropriate driver etc. I can print fine for a little while. If i turn off the computer or it goes to sleep, somehow, the printer goes "offline" and I'm unable to print. I'm having to uninstall & re-install the printer each time this happens. It's as if my computer is not recognizing that it's still communicating with a printer once it's gone to sleep or restarted. Such a pain.
BTW - my home desktop computer (also hp) is hooked to the printer and never goes offline. It probably doesn't have this issue b/c the desktop isn't having to connect wirelessly via the router.
Advice??

There are several updates on this page. You did not state it but I assume you are using WIn7 64-bit.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro L7590 and Mac Yosemite 10.10 printing software

I just upgraded my Mac to a mew 2014 MacBook Pro with Retina and Yosemite 10.10.1.
I want to install my old HP Officejet Pro L7590. I have the printer connected by network cable to my Comcast network hub. There is a stable connection on both ends (lights are on). What software do I download to install the printer? Is it not available for Yosemite yet? Where is it located? I'm assuming its not available for Yosemite yet? I don't have the original software. Thanks.
This question was solved.
View Solution.

Hi @rustyblue,
Welcome to the HP Forums!
Currently there are no full feature software and drivers directly through HP for Mac OS X 10.10 for this particular printer model. However, after some searching I found this driver directly through Apple. HP Printer Drivers v3.0 for OS X.
If you need help with scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005. Even though this post is for Mac OS X 10.9.3 and a different printer, these steps will work for your printer on 10.10 as well.
Hope this helps you get up and running, please let me know if you have any further issues!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Unable to install Officejet Pro L7590 print driver in Windows 8.1

I have lost days of time trying to get my OfficeJet Pro L7590 to print properly and otherwise operate in a stable manner. My computer is a new Dell XPS8700 running Windows 8, upgraded to Windows 8.1 via the "Store" app after purchase. My problems started soon after the 8.1 update.
The primary problem symptom is the printing of about a half page of text fine, then the printer spits the page out and prints several more pages of mostly blank paper with random symbols around a top or side edge. This occurs regardless of the program doing the printing, i.e., MS Word, Excel, Acrobat, etc.
I have run the Printing Doctor program many times which doesn't fix anything, despite its claims to the contrary (more below).
I have been on this forum many times and tried multiple instances of uninstall/reinstall without success. The HP Installer may make it through the whole installation process but unstable performance of the printer is the outcome. Uninstalling the printer software using HP's uninstaller ALWAYS crashes before it can finish uninstalling. I get a message of "HP Installer Uninstaller has stopped working". I would attach a screenshot here but I does not seem an option in this window.
I have run multiple versions of HP's scrubber programs which also crash by level 2 with same message. I still ran L4 regardless but that crashes, too. That's the constant of every uninstallation or scrubbing effort using HP's programs: a crash without an error message given beyond the "HP Installer Uninstaller has stopped working".
I run the Printer/Scanner Doctor tool when the software was malfunctioning and it always finds a Print Spooler problem, "fixes" it but the problem remains. This posting is coming after the "Doctor" tool told me to uninstall the program. HP's uninstaller crashed, as usual, but the I was told to use Windows Add/Remove programs to finish the job. I did. I have not tried to install the program again and am becoming close to 'Refreshing' my entire Windows program, which will require reinstalling and updating Windows and every program I use - which will take days. I hope to avoid that step.
Dell's hardware analysis utility tells me everything hardware is great!
I truly believe HP's software IS THE PROBLEM and would love to figure this out. The printer has always worked great - until the Windows 8.1 update. The scanner will work fine (usually) after I reinstall the software. I used the printer before on my prior computer running Windows 7 with no trouble.
Going into today's crash info, via Event Viewer, I have this message from the error log:
Application 'C:\Program Files (x86)\HP\Digital Imaging\bin\hpqbam08.exe' (pid 3960) cannot be restarted - Application SID does not match Conductor SID..
And this error occurred just after:
Faulting application name: svchost.exe, version: 6.3.9600.16384, time stamp: 0x5215dfe3
Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53087867
Exception code: 0xc0000005
Fault offset: 0x0000000000005fc4
Faulting process id: 0x1284
Faulting application start time: 0x01cfe34585c8f1c4
Faulting application path: C:\WINDOWS\system32\svchost.exe
Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
Report Id: a118ba71-4ff5-11e4-bea6-34238711e0a0
Faulting package full name:
Faulting package-relative application ID:
There was an earlier - about 30 minutes earlier - warning saying:
The application (HP Solution Center, from vendor Hewlett-Packard) has the following problem: To function properly, HP Solution Center must be reinstalled after you upgrade Windows.
I have reinstalled it many times. I have used HP's installation & uninstallation utilities, including the Installation failure utility, none of which install the program properly, CERTAINLY not well enough that I can EVER uninstall it without a crashed uninstallation per description above...
I think I have reviewed and tried every "canned" HP quick solution, and not so quick solution, on this forum.
Comments?
Richard_L

Added Info for original posting:
Windows 8.1 64 bit OS. Dell box shipped with Windows 8 and upgraded to 8.1 via the Windows store. As stated in original post, computer is Dell XPS 8700, I7 cpu with 16 gbs of RAM.
Happy to answer any more specific questions.
Richard

HP OfficeJet Pro L7590 want to use wireless

Similar Messages

Maybe you are looking for