Hp omen audio volume so low after windows 10 upgrade

i upgraded to windows 10 and i find that the audio volume level is really low compared to how it was on window 8.1 i checked that realtek high definition audio driver is properly installed the volume now even when i max it out is really low its so hard to watch even youtube

It does appear the drivers were not included in the Windows 10 operating system and are not available for download on the driver page. They may be added in the future but for now we can only try using Windows Updates to install. If you go to Start > Settings > Update and Security > Make sure you're on the Windows update tab and select the Advanced settings button. Make sure the box to install optional updates is checked, and then check for available updates. Install any available updates and restart your PC. After this go into Device Manager and right click the WWAN adapter. Select Update driver software and let it search automatically. If it does not find the driver automatically try it again but select the option to specify a driver. You will get to a page that asks to select a vendor and model. Click the Windows update button to refresh the list of available drivers and look for your WWAN adapter. If you do not know which WWAN adapter is in your model (it should show the name but may show Unknown Device or Network adapter) right click on it, go to Properties and select the Details tab. Change the drop down to Hardware Ids and give me the first ID in the list. Thanks.

Similar Messages

X-Fi Xtreme Audio - Volume goes low, static, then comes back.

Hi all, I have a problem that just developed with my sound after 3 years of owning this PC. Is this the infamous static problem with the card or something else I can fix? Thanks.
I was playing a game the other day when the sound 'cut out'. If I turn the volume on my speakers up louder I can sometimes hear what should be playing, it's very quiet and sometimes distorted. There is also a loud hiss and static when the volume is at standard levels whilst the sound is doing this. Sometimes I can't hear anything if I turn it right up even, it's just the static.
There have been the odd pop, crackle and even strange noise coming from it on occasion over the last few days.
After a while it just decides to go back to normal and will work for a while and then do the same thing again. Will happen when playing games or even just on the desktop (listening to music to test this)
I have unplugged my speakers (2 desk speakers with subwoofer) and put headphones in, they are doing exactly the same thing so it is not the speakers.
I have updated the drivers. No change.
I'm baffled. Sometimes even restarted the computer doesn't fix it, it just decides to work again.
It's almost like it's getting inteference or picking up a staticy radio, and then cuts out again, but obviously i know that's not what it's doing.
Any solutions or am I looking at buying a new sound card here?
I'm not using two gfx cards, and the mobo is ASUS p5n-e sli. I have an Nvidia Geforce 8800 GTS gfx card.
Any other info you need let me know, thanks in advance.
Oh and I believe it's in PCI. Not PCI-E.

@Re: X-Fi Xtreme Audio - Volume goes low, static, then comes backu Hi
Did anyone solve this - I have started getting exactly the same problem today. There is a fairly loud pop and then the sound that normally should be coming form the machine (game or music) is very quiet and distorted. After a short while (a few minutes), it pops again and starts working again. I built this machine a few months ago and this is the first time that I have had this issue. The specs are as follows:
XFX ATI Radeon HD 5870
Asus P6X58D Premium Intel X58 Motherboard,
Intel Core i7 920 D0 Stepping 2.66Ghz (Nehalem)
Corsair XMS3 6GB (3x2GB) DDR3 PC3-2800C9 (600MHz) Tri-Channel
Hitachi Deskstar 7K2000 2TB HD
Intel X25-M Mainstream 80GB SSHD
X-Fi Fatalty FPS
The X-Fi card is from my old machine and it worked perfectly in that one.
Many thanks,
Dave

Can't access old ver. 9, 11 & 13 clips after Windows upgrade

In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips. In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro). Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive. Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13. Tried everything I can think of....any suggestions PLEASE!

Very good, I completely understand. Please understand "I am not a computer geek!"
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets). CORRECT! Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO! (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.) NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them. As such there is nothing to add to the timeline. Last night I added to the NEW PE 13 a 22 min program I'm working on. I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
Now in response to a previous question you asked:
1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
the Presets" field there? NO.... I can get to /Computer but there is no QuickTime there! I did download QuickTime yesterday after your suggestion.
2. You wrote
Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
Or other? What is the specific full name of one of these files that is giving the error message?
With everything I've been trying, I'll have to recreate this series of events to answer directly.
When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system? Help me with a way to determine what the bit was on 9 & 11!
Were two separate computers involved or did you manage to change the operating all on one computer? All on one Computer
The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace. Help me understand!!!! I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace". But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
WolcottVideo
    Can't access old ver. 9, 11 & 13 clips after Windows upgrade
    created by A.T. Romano in Premiere Elements - View the full discussion
WolcottVideo (Mike Bruce)
Thanks for the replies.
My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
Here is a basic description of where the details between us need to be confirmed...
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
We will be watching for your reply.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Sound Card Volume Too Low in Windows XP

Hello,
I have installed windows xp sp2 with bootcamp and everything is working perfect.
the only problem is that - my sound card volume is low and when i restart in MacOS the sound card volume is super cool.
what shall i do ? in windows xp i can see "Cirrus Logic HD Audio" driver for sound.
anyone can help me ?

Have you done a search for ""XP sound problems"" yet?
Here's a link to one of them:
http://discussions.apple.com/thread.jspa?threadID=2037093&tstart=0&messageID=130 67584#13067584
Look through ALL the pages and see if one of them will work for you. There is a link to another place that may have some drivers that MAY work in the page that is linked above.
Hope it helps...

Laptop Audio volume very low

Hi Experts,
I bought my Inspiron laptop in January and was hoping for good sound quality based on the advertised Waves MaxxAudio. However I find the laptop volume is very low and end up holding the speakers close to my ears when doing a skype call.
Is this an issue I need to take up with warranty support or are the speaker volumes expected to be this low?

Hello. Some of the models do have adequate volume and some have low volume, but it is a subjective thing and I don't know if anyone can say that your volume is normal or not without hearing it. Even then they would need to compare it with others of the same model. If you post your model name then maybe someone with that model will express an opinion.
If the volume is low only in Skype but okay when playing an audio file from the hard drive, then probably a Skype setting. Right click on the volume icon on the taskbar and click on "Open volume mixer" to see individual volume sliders for each device.
Also you could test by switching from the vendor's audio driver (varies by model but probably Realtek) to the Windows native audio driver. If the volume seems too low (when playing audio files) with both drivers then there could be a hardware problem.
1. Open the Device Manager (type devmgmt.msc in the Windows search box).
2. Expand the "Sound, video & game controllers" and right click on "Realtek High Definition Audio".
3. Select to "Update Driver Software".
4. Click on "Browse my computer for driver software".
5. Click "Let me pick from a list of drivers on my computer".
6. Put a check in the box "Show compatible hardware" if not already checked.
7. In the list of devices, click "High Definition Audio" (the native driver).
8. Click "Next".
9. On the Update Driver Warning box, click "Yes" (install the driver).
10. Restart the laptop if prompted. If not prompted, then no need to restart.
[To get back to the Realtek driver, do it again but reverse the names in steps 1 and 6.]
Note that the above instructions are for models with a Realtek audio driver. If yours uses IDT or Conexant, look for those names in the Device Manager.

Mini CQ10t-100 IDT audio volume really low even when maxed out

Just got my mini in today and the audio volume is very low. Even at 100% you can barely hear it. Ive downloaded the latest driver on hp's site and im still having the same problem. Im running Windows XP SP3 with IDT driver version 5.10.6217.0.
Doing some google searches I found a couple of sites that recommended uninstalling the IDT driver and using Vistas High Definition Audio CODEC driver but I dont have that option with XP. How can I get this working correctly?

Unfortunately, you are not the only one. This has been reported elsewhere, and there doesn't seem to be any fix that I have seen. Your only solution may be to revert to 10.4.6.
I'm sorry to be the bearer of bad news,
Miriam

SX80 Audio Volume Became low

I am using SX80 unit with projector connected with 50' HDMI cable, and the main audio also comes out from projector over HDMI. I am also getting another audio out to external amplfier+ speaker set to the back side of the room ( this is faily large room).
Suddenly I came across that the audio volume over the projector ( though HDMI) became very low. But the audio over "line out" was still OK. I was not able to figure out why this became low; I even tried TC console, and nothing I could do there to get normal audio out.
Everything became normal after a factory reset. Does anyone had similaro experience with SX80 ?
Thanks, Nick.

At a guess, I'd say that the SX80 is echo cancelling as it's hearing itself back through the microphones too much.
We've seen this quite a few times on various models of endpoint - and the end users usually think "I can't hear, so I'll turn the volume up" which often makes the problem worse. Turning the volume down on the display device, and the endpoint, usually resolves the issue.
PS Your question would be better placed in the TelePresence section of the forums where these devices are more actively discussed than in the Other Collaboration section you have posted in. If the above has not answered your question, I'd suggest you move your discussion over there.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

AUDIO VOLUME TOO LOW

My hp 650 notebook's audio volume is too low. How can I make it sound louder

Hi Macarius,
Your HP 650 is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Audio sounding Dull & low - After export

Hi there,
I'm editing in Premiere Pro CS4. If you see the images below, it will tell you a bit more about the system and settings I'm using. I gave my customer a DVD and she complained about the audio. I asked her to email me the description of what she wasn't happy about, and she wrote this: 'with the audio the sound quality was lost it wasn't crisp and clear. And the base and beats were very low. Came out as very dull sound'. Now I agree with her. One of my fellow editors who uses another system produced a video, and imediately I noticed how wonderful the sound was. I could feel the base and hear more of the instruments.
My original audio peaked like this:
I asked someone what was the best level to put it at and they said let it peak at -6. So now my audio peaks like this:
After the complaint, I asked a few more people, and they said that the green level of the audio should be reaching level 6. So now my audio peaks like this:
Now I'm not sure if the above settings have fixed the problem, but at least on the computer it sounds better.
This is the version of Premiere I'm using:
This is some info about my computer:
File properties before export:
File properties after export:
Project settings:
These are my export settings:
I hope this is enough information and I appreciate any help. Let me know if you need me to gather more info.

haha very funny.
Certainly not. :-) I've actually noticed it even before she mentioned something to me. Maybe I'm mistaken. You sound as though nothing should be wrong with my audio. Is that right? Judging from my settings.

TX Power Levels are low after WLC upgrade to 7.0.98.0

I recently upgraded our WLC 4404 to release 7.0.98.0. The process was very smooth with no
issues. The controller manages access points in two buildings. Prior to the upgrade the access points were maintaining high TX power levels...typically between 1 and 3. After the upgrade the power levels all droped to 6 and 8. I have confirmed that the correct external antenas have been set for each access point. I have not done a site survey to see if the lower power levels are acceptable. But the environment has been very consistent for the past year with regards to TX power levels. For the time being I have manually set a power level of 2 to prevent any service outages. Is there any explanation as to why the power levels have changed so drastically?

My customer is having a simlar problem with 2106 controller and 1131 AG access point.
After I upgrade the controller for 7.0.98.218, the access points was setting automaticly by controller with power level "0".
When its happening I see the follwing logs
Thu Dec 15 12:19:15 2011 AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:00:3a:98:19:e7:c0 Cause=Heartbeat Timeout Status:NA
70 Thu Dec 15 12:19:15 2011 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:3a:98:19:e7:c0 Cause=Heartbeat Timeout Status:NA
Can You help me?
thanks, Murilo

ITunes Not Working After Windows Upgrade from Vista to 7

I recently upgraded a laptop from Vista to 7. iTunes 7.x was installed before the upgrade. As soon as Windows 7 was insatlled I upgraded to the lates version of iTunes(10.x). After the upgrade I had some issue where I was getting an error about artwork and iTunes would not open. I renamed the artwork folder to old and then I was able to get into iTunes. The next problem that I am running in to is that any time I click on a task such as find music iTunes stops responding and crashes. I've tried new config files, completely uninstalling and reinstalling, clean booting, etc. with no luck. Anyone have any suggestions?

I've been working on this issue for 2 days with no luck. Still looking for a solution if anyone has one. Thanks!

P6N Diamond X-Fi Xtreme, back audio jack not working after windows reinstall

Hi everyone,
I've been having a problem with audio since reinstalling windows. Previously under windows xp sp3 i had no issues but after the most recent reinstall of windows xp, the rear jacks for the audio aren't working despite the front headphones jack working perfectly fine. Since this was only a short term measure, i didn't bother trying to sort it out until now, when I've now installed windows 7 on the computer and the issue still exists.
I'm using the latest driver available on the msi website http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1168 and I have also tried using the audio driver patch available on the same page.
The fact that there were no problems before a recent windows reinstall and that the issue is mentioned on the driver download page makes me think the problem is with the drivers and not with the hardware.
I searched through the forums and while a fair few people seem to be having the same issue or similar issues with audio jacks not functioning properly, i couldn't find a relevant solution for me.
Cheers,
Dave

Yep that sounds exactly like my problem. The issue lies with the on board soundcard and their vista drivers. Creatives' vista drivers are notoriously bad. This coupled with the fact their drivers won't even INSTALL on a p6n board because their drivers do not detect the onboard soundcard adds to the problem. As far as I see it there are two ways to solve this issue:
1.) Buy a front audio panel addition to your case.
I am not sure on your setup but here is one with HD audio support: http://www.newegg.com/Product/Product.asp?Item=N82E16813999356
And that will fix your back panel port, and give you the option to use the front as well.
2.) Buy a new soundcard.
This is what I did after learning that the onboard x-fi isn't even a real x-fi card. I opted to buy the X-Fi gamer (cheapest of the X-Fi cards) and so far the drivers have been acceptable in vista. My non-hd front ports work, as well as my back port.
Another alternative would be to wait for MSI to release an update to the creative drivers that they provide. No guarantee on that though.

Beats audio volume very low despite all settings being set to their max

I've tried adjusting every setting availble in both windows and Beats control panels. This has always been a problem since I bought the compueter. I'm just tired of having to stick my ear next to the speakers to hear anything. Ear phone plug and ear phone volume control works fine. Both speakers are working, just with no power. HP Envy 14 Notebook Windows 7 Pro 64 bit I5 CPU

hi
I hope that your beats has been deactivated.
Press (fn and b) keys atonce to activate beats audio..
if not solved, uninstall your audio driver software,
restart your pc.
and reinstall them...
hope this helps.
**Click the KUDOS star on the left to say 'Thanks'**
**---'Accept as Solution' ----**if it solves your problem and make it easier for other people to find solutions.

HP Beats Audio EQ not working after Windows 10 update

Hi, I have an Envy 17t-j000 Quad Edition with Beats. After the Windows 10 upgrade, I have noticed that the Beats Audio EQ is not working. The left panel is working fine, but the right panel with the red sliders is not working. I move the sliders up and down, but nothing happens. Can you please help me fix this?

Hi Erico,I tried your method It says The best driver software for your device is already installed I Used this tool http://www.techspot.com/drivers/driver/file/information/16748/and I cleaned up all display drivers.windows searched in updates for drivers and updated all video drivers.now brightness control key is workingbut when i checked dedicated video memory it says 128 MB.but my dedicated video memory in 1024 MB.Take a look for Video memory

HP Pavillion g6 Notebook PC - Audio no longer working after Windows 8.1 upgrade

Hi
Product Name: HP Pavillion g6 Notebook PC
Operating System: Windows 8.1 (just upgraded)
Description: There is an audio issue. Sound does not work at all. Issues include:
iTunes error message: iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly
youTube issues: a video will play for 1 second, and then display error message
THe F9/F10/F11 buttons make no changes to the Audio settings
When I click the Sound button (which is currently muted), the Playing Audio window opens stating that Troubleshooting couldn't identify the problem.
This has only occurred since I upgraded from Windows 8 to Windows 8.1 this week.
The Audio and Sound settings in HP Support Assistant are:
IDT High Definition Audio CODEC
Status: (52)
Driver: stwrt64.sys
Version: 6.10.6425.0
AMD High Definition Audio Device
Status: (52)
Driver: AtihdW86.sys
Version: 8.0.0.8808
Thanks for your help
Phil
This question was solved.
View Solution.

Hello Pipster100,
I would like to assist you with getting this audio issue resolved with your HP Pavilion g6 Notebook PC. So I can better assist you, please provide me with the model/product number from your notebook.
Also, something that you can try is to use the Recovery Manager to Restore Software and Drivers. Once you open the HP Recovery Manager, install the audio driver that will be listed under drivers.
Looking forward to your response.
Thank you,
I worked on behalf of HP.

Hp omen audio volume so low after windows 10 upgrade

Similar Messages

Maybe you are looking for