HP Prime and RPN function issues
I am trying to populate a function whilest the RPN setting is active.
Why am I getting the "Error: Syntax Error" when pasting a function?
Doesn't the HP Prime allow for this or is there something I'm missing here?
Do I really have change settings from RPN to Algebraic or Textbook to input a function?
This question was solved.
View Solution.
Hi,
Good to hear it works.
A word of advice though: it has been reported that the calculator crashes when RPN mode is used in the Spreadsheet App. This has also been reported with the EDITLIST and EDITMAT commands.
Hopefully a fixed firmware update will be out soon.
Regards.
Note: I do not work for HP, I just like playing with calculators :-)
Similar Messages
-
X1 Music channel delay and video function issue.
For the longest time we have a delay when switching from a video channel to a music channel. 1 time out of 10 the music plays instantly. The other 9 times we have to wait 30 seconds to 7 mins for the music actually play. Sometimes the X1 resests itself. Even with no one using the net or voice, so it's no a bandwith issue. I've reset the box numerous times. Calling Comcast they say swith the box out. I'd do that but they both have saved programs. So that can be a last resort I guess. For the video, here lately when when we fwd or rwd the video it does not respond for a few seconds. Example: You hit rwd the video to where you want it then hit play. It Keeps on rewinding for a few seconds and when it does stop and play, your way past where you wanted to be. I changed the batteries in the remote, no help. No need to reset the X1 because it Resets self, 2-4 times a week when trying to listen to music anyways. X1 really does suck though, from day one. I prefer the old hd box...
Sounds like you have some kind of connection issue with the X1 system. I would call Comcast and schedule a tech visit.
-
Sudden system slowdown, start up and software functional issues
The following happened when I started up my iMac in the morning. The only thing I did the night before that was outside my normal email/browsing/dreamweaver routine was to plug in my iPad to update apps and download an instagram phone app. iTunes did take me to my billing login and asked me to confirm CVV code which I hadn't expected. It told me I was using a different computer than the one I usually use - I wasn't. Other than that, nothing seemed out of the ordinary all evening
Following morning symptoms as follows
Start up
Slow start up grey screen with progress bar and wheel which leads to a log on screen. Normally no progress bar and no need to login.
Desktop appears but the 20 or so files and folders take a while to appear. The Finder bar top of screen does not appear until I click on the Finder icon in the dock. Wacom tablet doesn't function and preferences for the wacom when clicked throws up a warning " Wacom tablet driver has a problem - reboot system or reinstall or update the driver. Items that usually start up such as Skype and stickies do not open automatically. Icons that would normally appear on the finder bar top screen such as dropbox and sophos do not appear.
Other behaviours
Clicking a link to a web article from an email throws up the prompt "You are opening the application 'Firefox' for the first time. Are you sure you want to open this application?"
Documents in Pages appear blank
All operations are slow/delayed
Disk Utility: Verifying disk permissions shows about 1200 permission errors. Repaired them, verifyed again and it looks like they are all still wrong.
Tried running sophos but it seems to sit in 'Calculating...' mode and doesn't indicate it has scanned any files.
Does anyone have any idea what is going on here, what might have caused it and what the best course of action might be? Please note, I will be going away on holiday for a week on Sunday, so I will not be able to respond to anyone between the 14th and 20th April.
Thanks
Also just removed sophos and downloaded it anew. The install is taking an age - it's been 15 minutes now. Could be part of the general malaise or maybe it just isn't going to install.If this started happening without your having made any changes and without a warning of low disk space, then it's likely that the startup drive, or some other hardware component, is failing. Back up all data immediately, then run Apple Diagnostics or the Apple Hardware Test.
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
[Solved] Asus Zenbook Prime (UX31A-DB51) Function key issues
I recently purchased this machine, and the final issue I have with is that the Function keys are not working. Looking at the wiki I saw that it should work out of the box with 3.4.4-2, and I'm on 3.4.5-1 and have issues with it. Following the instructions on building a patched module led to kernel panics.
Thanks in advance for any help
EDIT: dmesg output
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000d97e5000 (usable)
[ 0.000000] BIOS-e820: 00000000d97e5000 - 00000000d9de6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d9de6000 - 00000000d9de9000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9de9000 - 00000000d9dfe000 (usable)
[ 0.000000] BIOS-e820: 00000000d9dfe000 - 00000000d9e04000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9e04000 - 00000000d9e06000 (usable)
[ 0.000000] BIOS-e820: 00000000d9e06000 - 00000000d9e0b000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9e0b000 - 00000000d9f64000 (usable)
[ 0.000000] BIOS-e820: 00000000d9f64000 - 00000000d9f68000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9f68000 - 00000000d9fa7000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fa7000 - 00000000d9fae000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9fae000 - 00000000d9fb0000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fb0000 - 00000000d9fce000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9fce000 - 00000000d9fd1000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fd1000 - 00000000d9fd3000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9fd3000 - 00000000d9fea000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fea000 - 00000000d9ff0000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9ff0000 - 00000000d9ff8000 (usable)
[ 0.000000] BIOS-e820: 00000000d9ff8000 - 00000000d9ff9000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9ff9000 - 00000000da008000 (usable)
[ 0.000000] BIOS-e820: 00000000da008000 - 00000000da009000 (reserved)
[ 0.000000] BIOS-e820: 00000000da009000 - 00000000da014000 (usable)
[ 0.000000] BIOS-e820: 00000000da014000 - 00000000da019000 (reserved)
[ 0.000000] BIOS-e820: 00000000da019000 - 00000000da037000 (usable)
[ 0.000000] BIOS-e820: 00000000da037000 - 00000000da039000 (reserved)
[ 0.000000] BIOS-e820: 00000000da039000 - 00000000da04d000 (usable)
[ 0.000000] BIOS-e820: 00000000da04d000 - 00000000da04e000 (reserved)
[ 0.000000] BIOS-e820: 00000000da04e000 - 00000000da060000 (usable)
[ 0.000000] BIOS-e820: 00000000da060000 - 00000000da086000 (reserved)
[ 0.000000] BIOS-e820: 00000000da086000 - 00000000da09a000 (usable)
[ 0.000000] BIOS-e820: 00000000da09a000 - 00000000da09b000 (reserved)
[ 0.000000] BIOS-e820: 00000000da09b000 - 00000000da09c000 (usable)
[ 0.000000] BIOS-e820: 00000000da09c000 - 00000000da09e000 (reserved)
[ 0.000000] BIOS-e820: 00000000da09e000 - 00000000da09f000 (usable)
[ 0.000000] BIOS-e820: 00000000da09f000 - 00000000da0a4000 (reserved)
[ 0.000000] BIOS-e820: 00000000da0a4000 - 00000000da0b9000 (usable)
[ 0.000000] BIOS-e820: 00000000da0b9000 - 00000000da65d000 (reserved)
[ 0.000000] BIOS-e820: 00000000da65d000 - 00000000da8dd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da8dd000 - 00000000da8e2000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000da8e2000 - 00000000da8e3000 (usable)
[ 0.000000] BIOS-e820: 00000000da8e3000 - 00000000da926000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da926000 - 00000000dad35000 (usable)
[ 0.000000] BIOS-e820: 00000000dad35000 - 00000000daff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000daff4000 - 00000000db000000 (usable)
[ 0.000000] BIOS-e820: 00000000dbc00000 - 00000000dfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f200000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xda8b0000 ACPI 2.0=0xda8b0000 SMBIOS=0xf04c0 MPS=0xfd4b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037556000) (371MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037556000-0x0000000037aa3000) (5MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037aa3000-0x0000000040004000) (133MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000009accd000) (1452MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000009accd000-0x00000000ce792000) (826MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ce792000-0x00000000ceac1000) (3MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000ceac1000-0x00000000ceac5000) (0MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ceac5000-0x00000000ceace000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ceace000-0x00000000ceb65000) (0MB)
[ 0.000000] efi: mem22: type=1, attr=0xf, range=[0x00000000ceb65000-0x00000000ceb83000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000ceb83000-0x00000000ceba1000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ceba1000-0x00000000cebf6000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000cebf6000-0x00000000cebfb000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000cebfb000-0x00000000ced71000) (1MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ced71000-0x00000000ced79000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ced79000-0x00000000d90f9000) (163MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000d90f9000-0x00000000d97b2000) (6MB)
[ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x00000000d97b2000-0x00000000d97bb000) (0MB)
[ 0.000000] efi: mem31: type=3, attr=0xf, range=[0x00000000d97bb000-0x00000000d97e5000) (0MB)
[ 0.000000] efi: mem32: type=10, attr=0xf, range=[0x00000000d97e5000-0x00000000d9de6000) (6MB)
[ 0.000000] efi: mem33: type=5, attr=0x800000000000000f, range=[0x00000000d9de6000-0x00000000d9de9000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000d9de9000-0x00000000d9dfe000) (0MB)
[ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000d9dfe000-0x00000000d9e04000) (0MB)
[ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x00000000d9e04000-0x00000000d9e06000) (0MB)
[ 0.000000] efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000d9e06000-0x00000000d9e0b000) (0MB)
[ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x00000000d9e0b000-0x00000000d9f64000) (1MB)
[ 0.000000] efi: mem39: type=5, attr=0x800000000000000f, range=[0x00000000d9f64000-0x00000000d9f68000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x00000000d9f68000-0x00000000d9fa7000) (0MB)
[ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000d9fa7000-0x00000000d9fae000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000d9fae000-0x00000000d9fb0000) (0MB)
[ 0.000000] efi: mem43: type=6, attr=0x800000000000000f, range=[0x00000000d9fb0000-0x00000000d9fbd000) (0MB)
[ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000d9fbd000-0x00000000d9fce000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000d9fce000-0x00000000d9fd1000) (0MB)
[ 0.000000] efi: mem46: type=5, attr=0x800000000000000f, range=[0x00000000d9fd1000-0x00000000d9fd3000) (0MB)
[ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x00000000d9fd3000-0x00000000d9fea000) (0MB)
[ 0.000000] efi: mem48: type=5, attr=0x800000000000000f, range=[0x00000000d9fea000-0x00000000d9ff0000) (0MB)
[ 0.000000] efi: mem49: type=3, attr=0xf, range=[0x00000000d9ff0000-0x00000000d9ff8000) (0MB)
[ 0.000000] efi: mem50: type=5, attr=0x800000000000000f, range=[0x00000000d9ff8000-0x00000000d9ff9000) (0MB)
[ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x00000000d9ff9000-0x00000000da008000) (0MB)
[ 0.000000] efi: mem52: type=5, attr=0x800000000000000f, range=[0x00000000da008000-0x00000000da009000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x00000000da009000-0x00000000da014000) (0MB)
[ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000da014000-0x00000000da019000) (0MB)
[ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x00000000da019000-0x00000000da037000) (0MB)
[ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x00000000da037000-0x00000000da039000) (0MB)
[ 0.000000] efi: mem57: type=3, attr=0xf, range=[0x00000000da039000-0x00000000da04d000) (0MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x00000000da04d000-0x00000000da04e000) (0MB)
[ 0.000000] efi: mem59: type=3, attr=0xf, range=[0x00000000da04e000-0x00000000da060000) (0MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000da060000-0x00000000da086000) (0MB)
[ 0.000000] efi: mem61: type=3, attr=0xf, range=[0x00000000da086000-0x00000000da09a000) (0MB)
[ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x00000000da09a000-0x00000000da09b000) (0MB)
[ 0.000000] efi: mem63: type=3, attr=0xf, range=[0x00000000da09b000-0x00000000da09c000) (0MB)
[ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x00000000da09c000-0x00000000da09e000) (0MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x00000000da09e000-0x00000000da09f000) (0MB)
[ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x00000000da09f000-0x00000000da0a4000) (0MB)
[ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x00000000da0a4000-0x00000000da0b9000) (0MB)
[ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000da0b9000-0x00000000da119000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000da119000-0x00000000da133000) (0MB)
[ 0.000000] efi: mem70: type=6, attr=0x800000000000000f, range=[0x00000000da133000-0x00000000da139000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000da139000-0x00000000da13e000) (0MB)
[ 0.000000] efi: mem72: type=6, attr=0x800000000000000f, range=[0x00000000da13e000-0x00000000da140000) (0MB)
[ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000da140000-0x00000000da15d000) (0MB)
[ 0.000000] efi: mem74: type=0, attr=0xf, range=[0x00000000da15d000-0x00000000da28c000) (1MB)
[ 0.000000] efi: mem75: type=0, attr=0xf, range=[0x00000000da28c000-0x00000000da5f2000) (3MB)
[ 0.000000] efi: mem76: type=0, attr=0xf, range=[0x00000000da5f2000-0x00000000da5f8000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000da5f8000-0x00000000da65d000) (0MB)
[ 0.000000] efi: mem78: type=10, attr=0xf, range=[0x00000000da65d000-0x00000000da72b000) (0MB)
[ 0.000000] efi: mem79: type=10, attr=0xf, range=[0x00000000da72b000-0x00000000da8c7000) (1MB)
[ 0.000000] efi: mem80: type=10, attr=0xf, range=[0x00000000da8c7000-0x00000000da8c9000) (0MB)
[ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000da8c9000-0x00000000da8dd000) (0MB)
[ 0.000000] efi: mem82: type=9, attr=0xf, range=[0x00000000da8dd000-0x00000000da8e1000) (0MB)
[ 0.000000] efi: mem83: type=9, attr=0xf, range=[0x00000000da8e1000-0x00000000da8e2000) (0MB)
[ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x00000000da8e2000-0x00000000da8e3000) (0MB)
[ 0.000000] efi: mem85: type=10, attr=0xf, range=[0x00000000da8e3000-0x00000000da926000) (0MB)
[ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x00000000da926000-0x00000000daa70000) (1MB)
[ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x00000000daa70000-0x00000000dad06000) (2MB)
[ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x00000000dad06000-0x00000000dad0b000) (0MB)
[ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x00000000dad0b000-0x00000000dad0f000) (0MB)
[ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x00000000dad0f000-0x00000000dad1c000) (0MB)
[ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x00000000dad1c000-0x00000000dad2e000) (0MB)
[ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x00000000dad2e000-0x00000000dad35000) (0MB)
[ 0.000000] efi: mem93: type=6, attr=0x800000000000000f, range=[0x00000000dad35000-0x00000000daff4000) (2MB)
[ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x00000000daff4000-0x00000000db000000) (0MB)
[ 0.000000] efi: mem95: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f200000) (498MB)
[ 0.000000] efi: mem96: type=0, attr=0x8000000000000000, range=[0x00000000dbc00000-0x00000000dfe00000) (66MB)
[ 0.000000] efi: mem97: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem98: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem99: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS UX31A.204 05/09/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DBC00000 mask FFFC00000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F400000 mask FFFC00000 uncachable
[ 0.000000] 7 base 11F200000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dbc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd780] fd780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000
[ 0.000000] 0000000000 - 00db000000 page 2M
[ 0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f200000
[ 0.000000] 0100000000 - 011f200000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f200000 @ d97b5000-d97bb000
[ 0.000000] RAMDISK: 37556000 - 37aa3000
[ 0.000000] ACPI: RSDP 00000000da8b0000 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000da8b0090 0009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000da8c2058 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000da8b01c0 11E96 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000da8daf80 00040
[ 0.000000] ACPI: APIC 00000000da8c2150 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000da8c21c8 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000da8c2210 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000da8c22d8 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000da8c2318 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da8c2d58 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da8c3a00 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da8c3a98 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000da8c43b8 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000da8c4530 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000da8c4568 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000da8c4df0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000da8c5888 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 00000000da8c5940 00038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f200000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f200000
[ 0.000000] NODE_DATA [000000011f1fc000 - 000000011f1fffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a800000-ffff88011e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f200
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000d97e5
[ 0.000000] 0: 0x000d9de9 -> 0x000d9dfe
[ 0.000000] 0: 0x000d9e04 -> 0x000d9e06
[ 0.000000] 0: 0x000d9e0b -> 0x000d9f64
[ 0.000000] 0: 0x000d9f68 -> 0x000d9fa7
[ 0.000000] 0: 0x000d9fae -> 0x000d9fb0
[ 0.000000] 0: 0x000d9fce -> 0x000d9fd1
[ 0.000000] 0: 0x000d9fd3 -> 0x000d9fea
[ 0.000000] 0: 0x000d9ff0 -> 0x000d9ff8
[ 0.000000] 0: 0x000d9ff9 -> 0x000da008
[ 0.000000] 0: 0x000da009 -> 0x000da014
[ 0.000000] 0: 0x000da019 -> 0x000da037
[ 0.000000] 0: 0x000da039 -> 0x000da04d
[ 0.000000] 0: 0x000da04e -> 0x000da060
[ 0.000000] 0: 0x000da086 -> 0x000da09a
[ 0.000000] 0: 0x000da09b -> 0x000da09c
[ 0.000000] 0: 0x000da09e -> 0x000da09f
[ 0.000000] 0: 0x000da0a4 -> 0x000da0b9
[ 0.000000] 0: 0x000da8e2 -> 0x000da8e3
[ 0.000000] 0: 0x000da926 -> 0x000dad35
[ 0.000000] 0: 0x000daff4 -> 0x000db000
[ 0.000000] 0: 0x00100000 -> 0x0011f200
[ 0.000000] On node 0 totalpages: 1019371
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 871580 pages, LIFO batch:31
[ 0.000000] Normal zone: 1992 pages used for memmap
[ 0.000000] Normal zone: 125496 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000d97e5000 - 00000000d9de6000
[ 0.000000] PM: Registered nosave memory: 00000000d9de6000 - 00000000d9de9000
[ 0.000000] PM: Registered nosave memory: 00000000d9dfe000 - 00000000d9e04000
[ 0.000000] PM: Registered nosave memory: 00000000d9e06000 - 00000000d9e0b000
[ 0.000000] PM: Registered nosave memory: 00000000d9f64000 - 00000000d9f68000
[ 0.000000] PM: Registered nosave memory: 00000000d9fa7000 - 00000000d9fae000
[ 0.000000] PM: Registered nosave memory: 00000000d9fb0000 - 00000000d9fce000
[ 0.000000] PM: Registered nosave memory: 00000000d9fd1000 - 00000000d9fd3000
[ 0.000000] PM: Registered nosave memory: 00000000d9fea000 - 00000000d9ff0000
[ 0.000000] PM: Registered nosave memory: 00000000d9ff8000 - 00000000d9ff9000
[ 0.000000] PM: Registered nosave memory: 00000000da008000 - 00000000da009000
[ 0.000000] PM: Registered nosave memory: 00000000da014000 - 00000000da019000
[ 0.000000] PM: Registered nosave memory: 00000000da037000 - 00000000da039000
[ 0.000000] PM: Registered nosave memory: 00000000da04d000 - 00000000da04e000
[ 0.000000] PM: Registered nosave memory: 00000000da060000 - 00000000da086000
[ 0.000000] PM: Registered nosave memory: 00000000da09a000 - 00000000da09b000
[ 0.000000] PM: Registered nosave memory: 00000000da09c000 - 00000000da09e000
[ 0.000000] PM: Registered nosave memory: 00000000da09f000 - 00000000da0a4000
[ 0.000000] PM: Registered nosave memory: 00000000da0b9000 - 00000000da65d000
[ 0.000000] PM: Registered nosave memory: 00000000da65d000 - 00000000da8dd000
[ 0.000000] PM: Registered nosave memory: 00000000da8dd000 - 00000000da8e2000
[ 0.000000] PM: Registered nosave memory: 00000000da8e3000 - 00000000da926000
[ 0.000000] PM: Registered nosave memory: 00000000dad35000 - 00000000daff4000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dbc00000
[ 0.000000] PM: Registered nosave memory: 00000000dbc00000 - 00000000dfe00000
[ 0.000000] PM: Registered nosave memory: 00000000dfe00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfe00000 (gap: dfe00000:18200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ee00000 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000984
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3749436k/4704256k available (4538k kernel code, 626772k absent, 328048k reserved, 4308k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1696.065 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.46 BogoMIPS (lpj=5653550)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000027] init_memory_mapping: 00000000dbc00000-00000000dfe00000
[ 0.000031] 00dbc00000 - 00dfe00000 page 2M
[ 0.151052] Security Framework initialized
[ 0.151060] AppArmor: AppArmor disabled by boot time parameter
[ 0.151411] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.152933] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.153609] Mount-cache hash table entries: 256
[ 0.153820] Initializing cgroup subsys cpuacct
[ 0.153823] Initializing cgroup subsys memory
[ 0.153832] Initializing cgroup subsys devices
[ 0.153834] Initializing cgroup subsys freezer
[ 0.153836] Initializing cgroup subsys net_cls
[ 0.153838] Initializing cgroup subsys blkio
[ 0.153874] CPU: Physical Processor ID: 0
[ 0.153875] CPU: Processor Core ID: 0
[ 0.153882] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.153883] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.154440] mce: CPU supports 7 MCE banks
[ 0.154456] CPU0: Thermal monitoring enabled (TM1)
[ 0.154464] using mwait in idle threads.
[ 0.155854] ACPI: Core revision 20120320
[ 0.172956] ftrace: allocating 17824 entries in 70 pages
[ 0.186631] DMAR: Host address width 36
[ 0.186634] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.186647] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.186650] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.186661] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.186663] DMAR: RMRR base: 0x000000da3af000 end: 0x000000da3cbfff
[ 0.186666] DMAR: RMRR base: 0x000000dbc00000 end: 0x000000dfdfffff
[ 0.186743] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.186745] HPET id 0 under DRHD base 0xfed91000
[ 0.186954] Enabled IRQ remapping in x2apic mode
[ 0.186956] Enabling x2apic
[ 0.186958] Enabled x2apic
[ 0.186967] Switched APIC routing to cluster x2apic.
[ 0.187451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220416] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
[ 0.324902] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.324909] ... version: 3
[ 0.324910] ... bit width: 48
[ 0.324912] ... generic registers: 4
[ 0.324914] ... value mask: 0000ffffffffffff
[ 0.324916] ... max period: 000000007fffffff
[ 0.324917] ... fixed-purpose events: 3
[ 0.324919] ... event mask: 000000070000000f
[ 0.344968] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.364889] Booting Node 0, Processors #1
[ 0.378630] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.391536] #2
[ 0.405332] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.418168] #3 Ok.
[ 0.431901] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.431937] Brought up 4 CPUs
[ 0.431939] Total of 4 processors activated (13573.87 BogoMIPS).
[ 0.436493] devtmpfs: initialized
[ 0.437768] PM: Registering ACPI NVS region [mem 0xd97e5000-0xd9de5fff] (6295552 bytes)
[ 0.437873] PM: Registering ACPI NVS region [mem 0xda65d000-0xda8dcfff] (2621440 bytes)
[ 0.437918] PM: Registering ACPI NVS region [mem 0xda8e3000-0xda925fff] (274432 bytes)
[ 0.438826] NET: Registered protocol family 16
[ 0.438966] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.438969] ACPI: bus type pci registered
[ 0.439040] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.439044] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.488460] PCI: Using configuration type 1 for base access
[ 0.489097] bio: create slab <bio-0> at 0
[ 0.489161] ACPI: Added _OSI(Module Device)
[ 0.489163] ACPI: Added _OSI(Processor Device)
[ 0.489165] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489168] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.492211] ACPI: EC: EC description table is found, configuring boot EC
[ 0.495384] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.500091] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.500635] ACPI: SSDT 00000000da60a018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.501405] ACPI: Dynamic OEM Table Load:
[ 0.501409] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.501770] ACPI: SSDT 00000000da60ba98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.502576] ACPI: Dynamic OEM Table Load:
[ 0.502579] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.502752] ACPI: SSDT 00000000da60cc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.503510] ACPI: Dynamic OEM Table Load:
[ 0.503513] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.504368] ACPI: Interpreter enabled
[ 0.504373] ACPI: (supports S0 S3 S4 S5)
[ 0.504406] ACPI: Using IOAPIC for interrupt routing
[ 0.512510] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.512789] ACPI: No dock devices found.
[ 0.512794] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.513213] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.513809] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.513812] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.513815] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.513818] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.513821] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.513823] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.513826] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.513829] pci_root PNP0A08:00: host bridge window [mem 0xdfe00000-0xfeafffff]
[ 0.513867] PCI host bridge to bus 0000:00
[ 0.513870] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.513873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.513875] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.513878] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.513880] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.513883] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.513885] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.513888] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
[ 0.513899] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.513952] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.513968] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.513977] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.513985] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.514032] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.514046] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.514135] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.514163] pci 0000:00:14.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 0.514257] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.514289] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.514320] pci 0000:00:16.0: reg 10: [mem 0xf7d22000-0xf7d2200f 64bit]
[ 0.514413] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.514463] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.514489] pci 0000:00:1a.0: reg 10: [mem 0xf7d20000-0xf7d203ff]
[ 0.514599] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.514632] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.514654] pci 0000:00:1b.0: reg 10: [mem 0xf7d18000-0xf7d1bfff 64bit]
[ 0.514739] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.514775] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.514909] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.514948] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.515082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.515141] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.515168] pci 0000:00:1d.0: reg 10: [mem 0xf7d1f000-0xf7d1f3ff]
[ 0.515282] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.515316] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.515466] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.515490] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.515500] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.515512] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.515522] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.515532] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.515542] pci 0000:00:1f.2: reg 24: [mem 0xf7d1e000-0xf7d1e7ff]
[ 0.515605] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.515629] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.515651] pci 0000:00:1f.3: reg 10: [mem 0xf7d1d000-0xf7d1d0ff 64bit]
[ 0.515682] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.515732] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.515758] pci 0000:00:1f.6: reg 10: [mem 0xf7d1c000-0xf7d1cfff 64bit]
[ 0.515922] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.516173] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
[ 0.516366] pci 0000:02:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.517198] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.521918] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.521928] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.521957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.522122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.522161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.522339] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.522604] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.528361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.528420] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 0.528480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 0.528531] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 0.528584] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.528635] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.528687] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 0.528737] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.528831] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.528838] vgaarb: loaded
[ 0.528839] vgaarb: bridge control possible 0000:00:02.0
[ 0.528883] PCI: Using ACPI for IRQ routing
[ 0.530787] PCI: pci_cache_line_size set to 64 bytes
[ 0.530797] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.530873] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.530876] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 0.530879] reserve RAM buffer: 00000000d97e5000 - 00000000dbffffff
[ 0.530891] reserve RAM buffer: 00000000d9dfe000 - 00000000dbffffff
[ 0.530903] reserve RAM buffer: 00000000d9e06000 - 00000000dbffffff
[ 0.530914] reserve RAM buffer: 00000000d9f64000 - 00000000dbffffff
[ 0.530925] reserve RAM buffer: 00000000d9fa7000 - 00000000dbffffff
[ 0.530936] reserve RAM buffer: 00000000d9fb0000 - 00000000dbffffff
[ 0.530946] reserve RAM buffer: 00000000d9fd1000 - 00000000dbffffff
[ 0.530956] reserve RAM buffer: 00000000d9fea000 - 00000000dbffffff
[ 0.530966] reserve RAM buffer: 00000000d9ff8000 - 00000000dbffffff
[ 0.530975] reserve RAM buffer: 00000000da008000 - 00000000dbffffff
[ 0.530984] reserve RAM buffer: 00000000da014000 - 00000000dbffffff
[ 0.530993] reserve RAM buffer: 00000000da037000 - 00000000dbffffff
[ 0.531001] reserve RAM buffer: 00000000da04d000 - 00000000dbffffff
[ 0.531008] reserve RAM buffer: 00000000da060000 - 00000000dbffffff
[ 0.531015] reserve RAM buffer: 00000000da09a000 - 00000000dbffffff
[ 0.531022] reserve RAM buffer: 00000000da09c000 - 00000000dbffffff
[ 0.531028] reserve RAM buffer: 00000000da09f000 - 00000000dbffffff
[ 0.531033] reserve RAM buffer: 00000000da0b9000 - 00000000dbffffff
[ 0.531038] reserve RAM buffer: 00000000da8e3000 - 00000000dbffffff
[ 0.531042] reserve RAM buffer: 00000000dad35000 - 00000000dbffffff
[ 0.531045] reserve RAM buffer: 00000000db000000 - 00000000dbffffff
[ 0.531048] reserve RAM buffer: 000000011f200000 - 000000011fffffff
[ 0.531151] NetLabel: Initializing
[ 0.531153] NetLabel: domain hash size = 128
[ 0.531155] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.531169] NetLabel: unlabeled traffic allowed by default
[ 0.531194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.531202] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.533219] Switching to clocksource hpet
[ 0.539356] pnp: PnP ACPI init
[ 0.539371] ACPI: bus type pnp registered
[ 0.539727] pnp 00:00: [bus 00-3e]
[ 0.539735] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.539737] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.539739] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.539742] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.539744] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.539747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.539749] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.539751] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.539754] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.539756] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.539759] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.539761] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.539763] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.539766] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.539768] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.539770] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.539773] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.539775] pnp 00:00: [mem 0xdfe00000-0xfeafffff window]
[ 0.539777] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.539852] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.539883] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.539934] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.539938] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.540008] pnp 00:02: [io 0x0000-0x001f]
[ 0.540010] pnp 00:02: [io 0x0081-0x0091]
[ 0.540012] pnp 00:02: [io 0x0093-0x009f]
[ 0.540014] pnp 00:02: [io 0x00c0-0x00df]
[ 0.540016] pnp 00:02: [dma 4]
[ 0.540049] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.540058] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.540087] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.540186] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.540219] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.540233] pnp 00:05: [io 0x002e-0x002f]
[ 0.540235] pnp 00:05: [io 0x004e-0x004f]
[ 0.540237] pnp 00:05: [io 0x0061]
[ 0.540239] pnp 00:05: [io 0x0063]
[ 0.540241] pnp 00:05: [io 0x0065]
[ 0.540243] pnp 00:05: [io 0x0067]
[ 0.540245] pnp 00:05: [io 0x0070]
[ 0.540246] pnp 00:05: [io 0x0080]
[ 0.540248] pnp 00:05: [io 0x0092]
[ 0.540250] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.540252] pnp 00:05: [io 0x0680-0x069f]
[ 0.540254] pnp 00:05: [io 0x0200-0x020f]
[ 0.540256] pnp 00:05: [io 0xffff]
[ 0.540258] pnp 00:05: [io 0xffff]
[ 0.540260] pnp 00:05: [io 0x0400-0x0453]
[ 0.540264] pnp 00:05: [io 0x0458-0x047f]
[ 0.540266] pnp 00:05: [io 0x0500-0x057f]
[ 0.540268] pnp 00:05: [io 0x164e-0x164f]
[ 0.540315] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.540318] system 00:05: [io 0x0200-0x020f] has been reserved
[ 0.540320] system 00:05: [io 0xffff] has been reserved
[ 0.540323] system 00:05: [io 0xffff] has been reserved
[ 0.540326] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.540328] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.540331] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.540334] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.540338] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.540348] pnp 00:06: [io 0x0070-0x0077]
[ 0.540362] pnp 00:06: [irq 8]
[ 0.540395] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.540427] pnp 00:07: [io 0x0454-0x0457]
[ 0.540471] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.540474] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.540502] pnp 00:08: [io 0x0010-0x001f]
[ 0.540504] pnp 00:08: [io 0x0022-0x003f]
[ 0.540506] pnp 00:08: [io 0x0044-0x005f]
[ 0.540508] pnp 00:08: [io 0x0072-0x007f]
[ 0.540510] pnp 00:08: [io 0x0080]
[ 0.540512] pnp 00:08: [io 0x0084-0x0086]
[ 0.540514] pnp 00:08: [io 0x0088]
[ 0.540516] pnp 00:08: [io 0x008c-0x008e]
[ 0.540518] pnp 00:08: [io 0x0090-0x009f]
[ 0.540520] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.540522] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.540524] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.540571] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.540575] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.540584] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.540593] pnp 00:09: [irq 13]
[ 0.540627] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.540680] pnp 00:0a: [irq 12]
[ 0.540716] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.540743] pnp 00:0b: [io 0x0060]
[ 0.540745] pnp 00:0b: [io 0x0064]
[ 0.540752] pnp 00:0b: [irq 1]
[ 0.540788] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.541018] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 0.541020] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 0.541022] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 0.541024] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 0.541027] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 0.541029] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 0.541031] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 0.541033] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 0.541035] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 0.541038] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 0.541040] pnp 00:0c: [mem 0xdfe00000-0xdfe00fff]
[ 0.541103] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.541106] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.541109] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.541112] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.541116] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.541119] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.541122] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.541125] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.541128] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.541131] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.541134] system 00:0c: [mem 0xdfe00000-0xdfe00fff] has been reserved
[ 0.541138] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.541211] pnp 00:0d: [mem 0xdfe00000-0xdfe00fff]
[ 0.541274] system 00:0d: [mem 0xdfe00000-0xdfe00fff] has been reserved
[ 0.541278] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.541430] pnp 00:0e: [mem 0x20000000-0x201fffff]
[ 0.541433] pnp 00:0e: [mem 0x40004000-0x40004fff]
[ 0.541495] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[ 0.541497] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[ 0.541501] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.541534] pnp: PnP ACPI: found 15 devices
[ 0.541536] ACPI: ACPI bus type pnp unregistered
[ 0.548333] pci 0000:00:04.0: BAR 0: assigned [mem 0xdfe08000-0xdfe0ffff 64bit]
[ 0.548340] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.548357] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.548364] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.548408] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.548411] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.548413] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.548416] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.548418] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.548421] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.548424] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.548426] pci_bus 0000:00: resource 11 [mem 0xdfe00000-0xfeafffff]
[ 0.548429] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.548474] NET: Registered protocol family 2
[ 0.548608] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.549403] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.550900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.551049] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.551052] TCP: reno registered
[ 0.551067] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.551086] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.551175] NET: Registered protocol family 1
[ 0.551191] pci 0000:00:02.0: Boot video device
[ 0.586597] PCI: CLS 64 bytes, default 64
[ 0.586642] Unpacking initramfs...
[ 0.718182] Freeing initrd memory: 5428k freed
[ 0.718943] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.718947] Placing 64MB software IO TLB between ffff8800ca792000 - ffff8800ce792000
[ 0.718950] software IO TLB at phys 0xca792000 - 0xce792000
[ 0.719520] audit: initializing netlink socket (disabled)
[ 0.719531] type=2000 audit(1342675392.609:1): initialized
[ 0.719886] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.721809] VFS: Disk quotas dquot_6.5.2
[ 0.721861] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.721987] msgmni has been set to 7684
[ 0.722183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.722218] io scheduler noop registered (default)
[ 0.722221] io scheduler deadline registered
[ 0.722279] io scheduler cfq registered
[ 0.722575] efifb: probing for efifb
[ 0.725055] efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
[ 0.725058] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.725060] efifb: scrolling: redraw
[ 0.725063] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.727405] Console: switching to colour frame buffer device 128x48
[ 0.729621] fb0: EFI VGA frame buffer device
[ 0.729628] intel_idle: does not run on family 6 model 58
[ 0.729660] GHES: HEST is not enabled!
[ 0.729740] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.730316] Linux agpgart interface v0.103
[ 0.730401] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.732007] i8042: Detected active multiplexing controller, rev 1.1
[ 0.732785] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.732815] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.732839] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.732863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.732884] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.732989] mousedev: PS/2 mouse device common for all mice
[ 0.733073] rtc_cmos 00:06: RTC can wake from S4
[ 0.733238] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.733268] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.733278] cpuidle: using governor ladder
[ 0.733280] cpuidle: using governor menu
[ 0.733411] TCP: cubic registered
[ 0.733520] NET: Registered protocol family 10
[ 0.733728] NET: Registered protocol family 17
[ 0.733733] Registering the dns_resolver key type
[ 0.733877] PM: Hibernation image not present or could not be loaded.
[ 0.733883] registered taskstats version 1
[ 0.734299] rtc_cmos 00:06: setting system clock to 2012-07-19 05:23:13 UTC (1342675393)
[ 0.734449] Initializing network drop monitor service
[ 0.736068] Freeing unused kernel memory: 740k freed
[ 0.736186] Write protecting the kernel read-only data: 8192k
[ 0.741922] Freeing unused kernel memory: 1588k freed
[ 0.744508] Freeing unused kernel memory: 640k freed
[ 0.752904] systemd-udevd[48]: starting version 186
[ 0.755540] SCSI subsystem initialized
[ 0.757022] libata version 3.00 loaded.
[ 0.757753] ahci 0000:00:1f.2: version 3.0
[ 0.757857] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.757916] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 0.757920] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.757927] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.760754] scsi0 : ahci
[ 0.760973] scsi1 : ahci
[ 0.761219] scsi2 : ahci
[ 0.761696] scsi3 : ahci
[ 0.761814] scsi4 : ahci
[ 0.762047] scsi5 : ahci
[ 0.762660] ata1: SATA max UDMA/133 abar m2048@0xf7d1e000 port 0xf7d1e100 irq 42
[ 0.762664] ata2: DUMMY
[ 0.762665] ata3: DUMMY
[ 0.762667] ata4: DUMMY
[ 0.762668] ata5: DUMMY
[ 0.762670] ata6: DUMMY
[ 0.766691] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.079319] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.090674] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.090818] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.090822] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.101189] ata1.00: ATA-8: ADATA XM11 128GB, 5.0.1, max UDMA/133
[ 1.101208] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.110592] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.110759] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.110763] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.121163] ata1.00: configured for UDMA/133
[ 1.121291] scsi 0:0:0:0: Direct-Access ATA ADATA XM11 128GB 5.0. PQ: 0 ANSI: 5
[ 1.123017] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.123090] sd 0:0:0:0: [sda] Write Protect is off
[ 1.123095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.123119] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.123778] usbcore: registered new interface driver usbfs
[ 1.123805] usbcore: registered new interface driver hub
[ 1.123854] usbcore: registered new device driver usb
[ 1.124316] sda: sda1 sda2 sda3
[ 1.124612] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.125369] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.125376] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.125423] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.125529] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.125550] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d00000
[ 1.125619] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.125765] xHCI xhci_add_endpoint called for root hub
[ 1.125769] xHCI xhci_check_bandwidth called for root hub
[ 1.125819] hub 1-0:1.0: USB hub found
[ 1.125832] hub 1-0:1.0: 4 ports detected
[ 1.126030] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.126038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.126165] xHCI xhci_add_endpoint called for root hub
[ 1.126169] xHCI xhci_check_bandwidth called for root hub
[ 1.126239] hub 2-0:1.0: USB hub found
[ 1.126251] hub 2-0:1.0: 4 ports detected
[ 1.129851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.129926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.129933] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.129954] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.129988] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.133867] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.133883] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d20000
[ 1.142574] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.142727] hub 3-0:1.0: USB hub found
[ 1.142731] hub 3-0:1.0: 2 ports detected
[ 1.142859] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.142866] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.142879] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.142914] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.146795] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.146814] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d1f000
[ 1.155902] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.156064] hub 4-0:1.0: USB hub found
[ 1.156069] hub 4-0:1.0: 2 ports detected
[ 1.161829] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.162274] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.164964] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.165093] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.167496] [drm] Initialized drm 1.1.0 20060810
[ 1.168381] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.179358] ACPI: Lid Switch [LID]
[ 1.179416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.179422] ACPI: Power Button [PWRB]
[ 1.179469] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.179474] ACPI: Sleep Button [SLPB]
[ 1.183098] i915 0000:00:02.0: setting latency timer to 64
[ 1.398826] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 1.398830] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.399105] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.399167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.399169] [drm] Driver supports precise vblank timestamp query.
[ 1.399738] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.482168] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.499154] usb 1-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 1.499163] usb 1-2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 1.605348] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 1.718541] Refined TSC clocksource calibration: 1696.146 MHz.
[ 1.718545] Switching to clocksource tsc
[ 1.729014] hub 3-1:1.0: USB hub found
[ 1.729085] hub 3-1:1.0: 6 ports detected
[ 1.835066] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 1.958735] hub 4-1:1.0: USB hub found
[ 1.958810] hub 4-1:1.0: 6 ports detected
[ 2.025002] usb 3-1.2: new high-speed USB device number 3 using ehci_hcd
[ 2.224762] usb 4-1.5: new high-speed USB device number 3 using ehci_hcd
[ 2.474462] usb 4-1.6: new full-speed USB device number 4 using ehci_hcd
[ 2.667462] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.173881] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 3.173885] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 3.173902] Console: switching to colour dummy device 80x25
[ 3.175315] fbcon: inteldrmfb (fb0) is primary device
[ 4.162812] Console: switching to colour frame buffer device 240x67
[ 4.168648] fb0: inteldrmfb frame buffer device
[ 4.168650] drm: registered panic notifier
[ 4.170494] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
[ 4.170803] acpi device:35: registered as cooling_device0
[ 4.171244] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 4.171252] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.171274] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.261463] device-mapper: uevent: version 1.0.3
[ 4.261618] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 7.530172] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.671884] systemd-udevd[206]: starting version 186
[ 7.701027] ACPI: Requesting acpi_cpufreq
[ 7.708519] Monitor-Mwait will be used to enter C-1 state
[ 7.708550] Monitor-Mwait will be used to enter C-2 state
[ 7.708563] ACPI: acpi_idle registered with cpuidle
[ 7.765552] ACPI: AC Adapter [AC0] (on-line)
[ 7.792019] ACPI: Battery Slot [BAT0] (battery present)
[ 7.842020] wmi: Mapper loaded
[ 7.849215] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.849223] ACPI: Thermal Zone [THRM] (54 C)
[ 7.856172] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.856873] mei 0000:00:16.0: setting latency timer to 64
[ 7.857061] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[ 7.867562] iTCO_vendor_support: vendor-support=0
[ 7.870231] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.870413] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 7.878227] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.880017] cfg80211: Calling CRDA to update world regulatory domain
[ 7.887026] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \SMB0 1 (20120320/utaddress-251)
[ 7.887035] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2 (20120320/utaddress-251)
[ 7.887041] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.890845] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 7.895102] usbcore: registered new interface driver uas
[ 7.897297] Initializing USB Mass Storage driver...
[ 7.897383] scsi6 : usb-storage 1-2:1.0
[ 7.897494] usbcore: registered new interface driver usb-storage
[ 7.897496] USB Mass Storage support registered.
[ 7.905414] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.908378] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 7.908380] Copyright(c) 2003-2012 Intel Corporation
[ 7.908463] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 7.908465] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900040c8000
[ 7.908467] iwlwifi 0000:02:00.0: HW Revision ID = 0x24
[ 7.908564] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
[ 7.909834] Linux media interface: v0.10
[ 7.912145] Linux video capture interface: v2.00
[ 7.912309] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.916365] scsi7 : SCSI emulation for RTS5139 USB card reader
[ 7.924679] scsi 7:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 7.926600] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b330)
[ 7.927768] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 7.927991] Bluetooth: Core ver 2.16
[ 7.928007] NET: Registered protocol family 31
[ 7.928009] Bluetooth: HCI device and connection manager initialized
[ 7.928012] Bluetooth: HCI socket layer initialized
[ 7.928014] Bluetooth: L2CAP socket layer initialized
[ 7.928025] Bluetooth: SCO socket layer initialized
[ 7.929593] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 7.930401] usbcore: registered new interface driver rts5139
[ 7.932134] usbcore: registered new interface driver btusb
[ 7.938575] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input6
[ 7.939734] usbcore: registered new interface driver uvcvideo
[ 7.939737] USB Video Class driver (1.1.1)
[ 7.959022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.960155] asus_wmi: ASUS WMI generic driver loaded
[ 7.961792] asus_wmi: Initialization: 0x1
[ 7.961840] asus_wmi: BIOS WMI version: 7.9
[ 7.962148] asus_wmi: SFUN value: 0x4a2877
[ 7.963015] asus_wmi: Can't find DSTS
[ 7.968179] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[ 7.968413] iwlwifi 0000:02:Hi, I bought the UX32VD a few weeks ago. Most of the steps, mentioned in the article about the UX31A apply to the UX32VD too. I don't know what your problems are. All the steps are explained.
[ 8.039202] asus_wmi: Can't find DSTS
Just patch the kernel with the mentioned fix, or use the dkms variant. This will fix the can't find DSTS issue. After that, the asus-nb-wmi (or sth. like that) module will be loaded successfully, which makes most of the function keys work (except the screen brightness keys). The only thing remaining is to use the supplied hackarounds to be able to change the screenbrightness.
After these steps, I created a .Xmodmap to remap the automatic kbd. backlight key and the touchpad disable key to XF86MonBrightnessDown (or so .. can't remember the exact name) and XF86MonBrightnessUp and respectively mapped the shortcuts with xfce4-keyboard-settings (XF86MonBrightnessDown to the command backlight down, XF86MonBrightnessUp to backlight up). Unfortunately, sometimes this is a little bit buggy. The scan codes change randomly on some reboots, eg: one time it gets recognized as XF86MonBrightnessUp, and a few keypresses later as something different.
Hope they fix this issue with the 3.5 kernel, and eventually get the actual screenbrightness buttons to work. -
MAJOR DEFICIENCY = WASTED MONEY:
I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!
-
SAP MII function issue in SAP MII 14.0
Hi,
Currently I was working on some content up gradation work in SAP MII 14.0 , but while working, I have got a strange think regarding SAP MII Functions. We have developed the same code in SAP MII 12.2 and faced the issue while migrating to 14.0. The issue is as follows,
The function we have used in 12.2 is getvalue(name) as in the below screenshot,
but while we have migrated to 14.0, then we saw the function has updated into getvalue(map, key) in 14.0
I have no idea why parameter of the existing function got updated, but the problem is if someone want to migrate the existing code from 12.2 to 14.0 using such of function then he/she can get a "Conversion Exception" and at that time it will become bit hectic to identify the issue and change the logic to handle this in all the places.
Regards,
SumanHello Suman,
I guess it is a bug in MII 14.0. The help doc has the getValue(name) still. However, the newer function is not present in the same. I guess it was not documented. I guess, the getValue(map, name) is a newer function which somehow replaced the older one.
I would suggest you to raise a support ticket. According to me, the getValue(name) and getValue(map, name), both should exist.
Regards,
Tufale Ashai. -
MONTH and YEAR functions. Please help...
Can anyone tell me why the YEAR and MONTH functions will only accept the format dd-MMM-yyyy (ex. 01-JAN-2009)
The calendar prompt will only retun the format dd/mm/yyy (ex. 01/01/2009). This renders the calender pretty useless.
I am really in need of some help on this. Does anyone know how to get the value returned from the calendar in a prompt into a format that can be used by the YEAR and MONTH functions?
Thank you in advanceHi,
Can you do those things at DB Level.. addition of YEAR and MONTH columns to Table.. because doing CAST to DATE operation will work at DB Level..
Ex: In Answers if you give YEAR(CAST('01-03-2009' AS DATE)), it is erroring out because default allowed date format of BI is different from the one specified.. Though it is issuing correct SQL which is working at DB level.. donno how to change the default format of BI..
So, what I can suggest is an alternative, which is at DB level.. if it is apt for you.. then
Following statement gives you YEAR value..
TO_NUMBER(TO_CHAR( cast('01-03-2009' as DATE), 'yyyy'), '9999')
This is the statement taken from Manage Session of BI..
-Vency -
Radio button and associated functionality is not working!
Hi Pros,
I am facing the following problem:
1.I have an interactive PDF created in Acrobat 9 Pro.
2.PDF have few radio buttons, each radio buttons ahave assigned valus(eg: 1,2,3 etc)
3.I have a text box in which the value of selected radio button is displayed.
4.PDF is working fine on my machine.
5.Client is having Internet Explorer version 7.0.5 and Adobe reader:8.2.6
6.The radio buttons and associated functionality is not working on client's machine.
7.The text box shows '0' even if we a radio button with value 2 or 1 is selected.
What will be the problem? How can I fix this issue?
Please help.Thanks alot for helping me on this.
Thanks to u also ~graffiti -
Function issue of Cross-Reference
Hi,
thanks for your attention on this topic.
there is function issue of Cross-Reference.
when click the Cross-Reference after re-installed the software (adobe Framemaker 7.10), the function is not working. please kindly check the screenshots below:
Error message below:
Please help to check this issue.
software: Adobe Framemaker 7.10
System: windows xp sp3
thanks in advance for your support .
Message was edited by: Lu StevenFire the error log off to the e-mail address indicated in the error message and then contact Adobe Support.
-
Message determination and Partner function LS (Logical system) for PO
Hi,
I have worked in the past with vendors (VN) as partner roles in a PO, with the message to create an EDI outpout to Partner Type: LI (Vendor), and this works succesfully.
Now, the idea was to use in EDI, a Partner Type: LS (Logical system) as a receiver of EDI messages (message types: ORDERS) for inbound Purchase Orders to the Partner.
So, we have set up a respective message condition, with Partner Function: LS (Logical System), in transaction: MN04 (Create Output-condition records).
A. When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent to partner.
B. When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N?
There is a single message condition that is to be read for both cases (trans: ME59N and ME21N).
Note: If I try ME21N, and enter the output type and partner (=Logical System), manually, I receive a warning message :
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent.
However you can not assign a partner function LS to a vendor, in vendor master data, because of message CZ 327 (Can not use this partner role).
Anyone with similar experience? Thank you for your advice.Hi,
I well understand that the receiving partner can be a partner: Vendor (LI).
I have seen that working.
However, in the Partner Profiles (trans: WE20), the receiver was created as a Logical System (LS).
We want the partner Logical system (LS) to receive the idoc for purchase order (ORDERS).
After that, I think that the idea is that the LS can generate an idoc for a sales order creation that will then outbound to another partner. I think that this is the concept.
The issue is that I have seen that the POs created with transaction: ME59N, have received from message determination (trans: MN04) the message with partner LS (automatically), and the idoc of the purchase order (ORDERS) have reached the partner LS.
The question is why the message determination fails when creating the PO from trans: ME21N or ME21, with reference to the PR. Message condition is the same and message determination procedure is the same for both cases.
There is no issue with customizing for the LS in trans: WE20
(Port processing agent is Active for LS and ORDERS have the proper processing code for application EF).
I hope I am helping more with this. -
Why the step-and-repeat function (command+d) isn't working in Illustrator CS5?
Why the step-and-repeat function (command+d) isn't working in Illustrator CS5?
I am trying this. Take an object, move it some inches on the right while holding the option key, so I duplicate it.
Usually, I pressed on command+d to duplicate this action on and on (duplicate the object and moving it some inches away), but now it is not working.
any idea?kwakoo,
It may be time for the list:
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Drag and drop functionality not working. IE shows ActiveX error
Hi all,
we recently installed new server, but on the new server the drag and drop functionality in web dynpro application is not working.
when we launch the standard test application wdr_test_drag_and_drop, the Internet explorer is showing a popup: An ActiveX control on this page might be unsafe to interact with other parts of the page. Do you want to allow this interaction? Yes/No
if we allow by clicking Yes or No, the drag/drop functionality is not working.
first I checked if the issue is with my IE version, but it is not working in any of the IE in any computer.
when I checked the same application from different ecc server on my IE, the different server application is working.
in my new server, do we need to do anything more to make the drag/drop working.
thanks,
Madhu_1980.Hi Madhu,
GO through this link, it might help
Step 1: Go to the Tools menu, and select Internet Options
There are times when the activex plugins are disabled in our browser settings, just enable them and give it a try.
Regards,
AkkI -
Drag and Drop Functionality in ADF
Hi, i have a cuestion,
I need to develop an application, but i have to determine if it is possible.
I explain..
I have to make an applicacion with elements with drag and drop functionality, i mean.. 3 to n containers on the page, a toolbar, with the possible elements to drag and drop on the containers,
later on i have to join that elements with lines, and to save the view, so, when the users open their workspace, they can see their last view saved state.
In a few words, that's my issue.
I ve been search about it, and i found something about drop target option about panel box componnents, but nothing about drawing lines and saved view states.
Do you know about some examples, o an example application, any help resource will be wellcome
Thanks in Advance!!!!
ABThere isn't a "painting" function built-in.
You can do drag and drop in ADF Faces between components though.
If you want to show relationship between components with lines - you might want to look into the Hierarchy Viewer.
http://jdevadf.oracle.com/adf-richclient-demo/components/ariaXml.jspx -
Drag and drop function to playlist
I cannot drag and drop songs from the library to my generated playlists. I can however, right click on the song and move it to the same playlist. Furthermore the songs that I have recently bought from itunes can be moved from the library to the playlist. The songs that cannot me moved via the drag and drop function were loaded from a flash drive because we bought a new pc and wanted to move the library. Any ideas would be appreciated.
After a lot of searching and no expectation of receiving an answer from Apple, I reverted back to v10.3. This gave me back the ability to drag and drop to playlists and my ipod.
Good luck to anyone else out there having this issue.
Maybe you are looking for
-
Adhoc Query: Absence Leave report
Hi All, I am trying to create a Query in Adhoc query for ABSENCE LIST. so i have added few columns: PERNR Value PERNR TEXT Personnel area Value Personnel area Text Personnel sub-area Value Personnel sub-area Text Company code Value Company code Text
-
Is it possible to only sync music?
So as we all know iTunes is very difficult to sync these days. iCloud is severely unpredictable, deletes music, deletes album art etc and doubles other mp3s for no reason requiring you to delete all your music and resync everything every couple month
-
Hi All, I am new in SAP and I am for the moment trying to learn about document distribution in DMS. I wonder what I should do to get the Status for my distribution order to OK? For the moment the Status alway stays at PC, depending how I distribute t
-
Print preview hangs on one wiki page
On this page http://en.wikipedia.org/wiki/Comparison_of_audio_formats selecting Print Preview hangs FF. I'm running 20.0.1 on Win 7. Tried loading FF in Safe (addons disabled) Also hangs on my XP machine. Never saw a hang like this before and was usi
-
Using media buttons in itunes on Equium P200
Is it possible to use the media buttons on my Equim P-200 notebook in itunes when its not the open window? They work if ive got it open but not if its not. This doesnt really help me much because i could just hit space. Are there some setting somewhe