Hp psc 1315 - printing photos - missing 1.4 inch at the bottom

Hello,
I'm trying tp print 4x6inch photos on my HP PSC 1315 on HP Photo Glossy Paper.
No matter what software I try to print from, it always cuts off the last 1/4 inch of the photo and it comes out blank in that last 1/4 inch of the photo.
I'm using WinXP.
Does this printer have edge-to-edge printing capability? I saw that it was advertised as such.
Is this a hardware or software error? Help please, i'm pulling my hair out!
Thanks

I beleive on this model you will need to use "tabbed" paper. This has a 1/2" tab that is removed after printing to give borderless 4x6 prints.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Using Aperture 3 and printing photos, is it best to export the photo CMYK as a TIFF?

Using Aperture 3 and CMYK when printing photos, is it best to export as a TIFF and if so as bit 8 or bit 16? Thanks!

Yes. 16-bit TIFF.
See Léonie's answer here.

I took a photo and can see it in the bottom left hand corner when i'm in camera, but can't see it when i click on it. What do I do?

I took a picture on my 5s, and can see it in the bottom left hand corner when i'm in the camera, but when i tap on it, it isn't there. I've tried restarting my phone, closing out the photo app, nothing has helped. Please help!

Hi TrinityFire, thank you for the update. It seems wrong that a site could limit you to using one method of "clicking". I wonder whether there is a Firefox setting to always ensure that mouse clicking will work even if your device has a touchscreen?
Could you check these two preferences and see whether they make any difference:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''touch''' and pause while the list is filtered
(3) Try double-clicking the following to toggle them to false:
dom.w3c_touch_events.enabled = <s>true (default)</s> ''See Note''<br>
dom.w3c_touch_events.expose = true (default)
You might need to restart after changing these settings before they take effect.
Does this switch the site from touch to mouse click? Or make it stop working altogether?
''Note: dom.w3c_touch_events.enabled requires a numeric setting, see cor-el's post below.''

Editing LR photos in PS puts them at the bottom of Grid in LR

When I edit a LR photo in PS and then "SAVE" when I go back to LR it has placed the ne photos at the bottom of the grid. I'd like it to be placed next to my original .dng file.
Is there a way to do this?

Check on what sort order you have on that group of images. Order by name or capture time will place them together. Order by import/modified time will place them apart.

Psc 1315 printer error message

After printing one document, on the next one the printer slowed considerably. Since then the Check Printer light is blinking and I was getting an error message (no longer getting message, light is blinking and it just won't print). The cartridge had been fine. I have done the trouble shooting process including installing a recently purchased brand new cartridge just in case with no luck. I do have some problems getting my Word program to work properly and wonder if that can be part of the problem.

Hello, Please try the below steps...
1.Click Start button on the Computer .
2.then click on Control Panel .
3.then Printers and Faxes
4.On top-left, click on Add a Printer
5.Click on Add a Local Printer
6.Then while "Use an Existing port" is selected , select "Virtual USB port ... " then click Next
7.from the Manufacturer list, select HP, and then under Printers list select Deskjet 990c" , then Click next and complete the wizard
Now try printing . It should work.

HP Photosmart Plus B209 - will not print photos - tray is not picking up the paper

The printer will not grab the photo paper when I attempt to print a picture. It works just fine when printing other things, such as text from WORD or something from the internet. Photo paper says "single sheet feed" on it, so I place one sheet in the tray.
Any ideas? Am I doing something incorrectly? Thanks

Hi hgr7,
I understand that you are having an issue with the photo tray picking up the paper. I will try my best to help you with this problem. In this document for The All-in-One Does Not Pick Up or Feed Paper From the Photo Tray there are several steps to resolve this issue.
I hope this helps, let me know.
Thank you,
I worked on behalf of HP.

How to Print File Path and File Name at the bottom of the Report?

Hi guys,
I have situation where i have to display my file path where i save my file. For example: U:\Reports\Monthly_Reports\Compay_xyz.jsp
also, after the file path line if its possible i would like to display the date where the last modification done on the file.
I read one of the post and some one suggested that use srw.get_report_name() but since i am a new to Reporting i am not sure how to use it.
Can anyone describe me little bit in detail please?
Thank You.

Hi,
Your logic seems to be fine and you should put it in the additional plsql code section "After displaying the page". But you may have to check you syntax by compiling it. You cannot use "LINEFEED". It should be '<br>'. This is the line break in html. Please check your type declaration. Also some ';' is missing after some statements.
Hope that helps.
Thanks,
Sharmila

I photo does not show icons on the bottom

I am using iphoto 9.0 and I have seen in the video instructions that there some icons on the bottom and also is saying that you can drag a picture into a date of the calendar.
I have tried to drag a picture into the date calendar and is not working, also I dont see the icons on the botton can someone tell me how to add those icons on the bottom and also how to fix the drag a picture into a date that is not working?

Hello Zelig,
Is your PDF read extended? or do you know whether this was created using Acrobat or any other product?
You may want to sign your document using Acrobat, please download the trail version from here# http://www.adobe.com/in/products/acrobat.html
If this works, then open the file in Acrobat and click on File -> Save as Other - Reader extended features. Save your file.
Now open the same file using Adobe Reader and try to sign it. It should work.
~Deepak

Print to Shared Windows Printer (PSC 1315)

I'm a Windows tech with a problem on my spanking new Intel MacBook.
I have a PSC 1315 connected via USB to an XP desktop PC.
I can print to the 1315 from the desktop with no problem.
Other Windows based PCs on my home network can print to it via a generic SBC router, which is handling network traffic and Internet access.
I have downloaded the OSX drivers for the PSC 1315 from the HP website and successfully loaded them onto the MacBook.
The HP Assistant that pops up asks me to add the HP printer that's either connected via USB or via IP. I have to bypass that setup. You'll see why below.
On the Mac I can not only see the folders that are shared from the desktop PC, but I can ALSO see the shared 1315 printer from across my wireless network. I can access shared files from the desktop on my Macbook.
So far, so good, right? Not.
I can't print to the PSC 1315 across my wireless network. All jobs go into a 'completed' mode but the printer never sees them. The driver that loads when I make the PSC 1315 my default printer on the Mac is 'generic postscript'. The PSC is not a postscript printer. I have scrolled down the list of HP printer drivers that are listed and can't find the PSC series listed anywhere. The HP drivers that I downloaded from the HP website for this printer are apparently only good for directly connected or print server-based PSC series printers - NOT for printers available as shared from an XP computer. In addition, the driver I downloaded from the HP website doesn't add itself to the large list of HP drivers that appear to be native to the Mac OS.
It gets better. I have Parallels loaded on the MacBook, with a copy of XP. When I fire up XP I can print to the PSC 1315 across my wireless network with absolutely no problem. Just like all of my other PCs and notebooks.
Back to the Mac OS side. I've discovered that one can access some sort of printer admin program using 127.0.0.1:631/printers. This is a 'CUPS' interface (I have no idea what CUPS is). I have tried to use this interface to further configure the PSC 1315 printer that shows up on that page, but to no avail.
I can only assume that the PSC 1300 series set of printers is just not designed to be accessible from a MacBook across a wireless network.
If anyone can dispute that I would love to hear about it. Until then, the only way I can print is if I fire up XP using Parallels when I want to print wirelessly.
Intel MacBook Mac OS X (10.4.7)

For what it's worth, let me provide you some background and other ideas. As a Windows tech, you should be able to understand more why things might be failing with some basic background and other ideas.
I've discovered that one can access some sort of printer admin program using 127.0.0.1:631/printers. This is a 'CUPS' interface (I have no idea what CUPS is).
CUPS (Common Unix Printing System) is the printing system used in Mac OS X. It runs its own server which can be accessed on your localhost at <http://127.0.0.1:631>. Apple has made additions to the CUPS software as distributed by cups.org, so the web interface does not provide access to all the extras Apple has added.
CUPS is uses "front end" drivers and/or filters. The data to be printed is manipulated into a form that the particular printer can understand. This information is then handed off to the "backend" which handles the communication between the computer and the printer.
The HP drivers that I downloaded from the HP website for this printer are apparently only good for directly connected or print server-based PSC series printers - NOT for printers available as shared from an XP computer.
As you have found out the drivers HP supplies are limited and will only work when the printer is connected in certain ways. This is a limitation set by HP, not the Mac OS or the CUPS printing system. For whatever reason, the major printer manufacturers have essentially bypassed CUPS. They use just enough of it to direct the print job back to their own proprietary software. No real "frontends" and certainly none of the CUPS "backends" are used.
In order to print to a printer connected to a Windows computer, we must therefore turn to drivers that integrate with CUPS and can use the "smb" or samba backend that Apple provides. The hpijs and the Gutenprint (Gimp-Print) drivers fulfill this role.
At present there is not a specific PPD for the HP PSC 1315 in either package. That is most likely why the Generic PostScript PPD was assigned. The OS tries to match the manufacturer and printer model that the printer relays to the OS with a PPD that is exactly the same. When this fails, the system falls back to whatever default is specified in the software.
Does that mean that the PSC will absolutely not work? No. HP shows that the PSC 1315 is part of the 1300 series. A 1300 series PPD does exist within the hpijs driver set. It will show in the list of printers as "HP PSC 1300 Foomatic/hpijs". You can manually select this as your PPD.
I removed the driver (HP) anyway and downloaded the HPIJS set.
This is good. Did you also remove any HP files from the /Library/Printers/PPD Plugins directory? Please do if you have not already done so. You will have to kill off a number of processes before you are fully rid of these plug-ins. Perhaps the easiest way is to just restart the computer after you trash the PPD Plugins. It is important to be sure these are disabled. Just having the HP supplied drivers installed will most likely "tie up" the printer and make it unavailable to any other driver set. The PSC is an all-in-one machine. The HP software ties up the continuously looking for the command to start scanning.
Windows already is sharing the printer. I'm trying to connect to it over my wifi network.
I think Apple just doesn't support the PSC1315 that way.
Apple, just like Windows, doesn't "support" any particular printer. Nor do they write the drivers for them. Greg is more of an expert at Windows printing from a Mac than most of us. He can correct me if I am wrong, but I think all the necessary elements should be available to make your combination work. Make sure you have gotten rid of all or disabled the HP supplied software and try manually selecting the "HP PSC 1300 Foomatic/hpijs" printer within the context of the Windows printer sharing article Greg cited.
Hope this helps.
Matt
Mac Mini; B&W G3/300

HP PSC 1315 - Encoder Strip Assembly Issues

I am searching for help on assembling the encoder strip on my HP PSC 1315 printer.
My kid reached inside and pulled it out before I could even gasp...now i have a clear plastic strip, a metallic piece that seems to be floating and a printer that doesn't work.
I am mystified on how it assembles and where the 'threading across the sensor' has to be done etc...
Unable to find any pictures ...
Any and all help would be highly appreciated.

The page here may help, it shows some pictures (for a different model).
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I take 300 dpi photos with my iPhone 4s? And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.

How do I take 300 dpi photos with my iPhone 4s?
And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.
I have been using the standard camera on the iPhone and require 300 dpi to create photo books as the photos are resized according the layout.
Your time and assistance in appreciated.
Thanks

Thanks Tonefox!
After looking at a few of the links I found a mathematical equation that assisted me.
Inches = Pixels/DPI
eg: 3 inches = 300 pixels/100 DPI
Using this equation and the fact that iPhone 4s takes photos that are 3264 x 2448 I was able to work out the largest print I could make with 300 DPI.
Width 3264 pix/ 300 DPI = 10.88 inches
Height 2448 pix/ 300 DPI = 8.16 inches
Therefore, the largest print (with 300DPI) I can make of these photos is 10.88 inches x 8.16 inches.
Which is great!
So is it critical for me to change the dpi in say photoshop or does it not matter as long as I don't go above the 10.88 inches x 8.16 inches?
From what I can gather the smaller I resize the photo the higher the DPI and the bigger I stretch the photo the lower the DPI?
Further clarification will be much appreciated. Thanks

Using eprint to print photos with email text on one page

I have been using Presto eprint services for several years for my Dad, and I really like how it works and allows me to print the email (from, to, text in the body of the email), plus any attachments, all on one page using full letter size paper However, my parents would like to get rid of their land-line phone, so I'm looking for options to replace the Presto printer. I was thinking that HP eprint might be a good option, but based on some initial tests with a friends printer, it seems to just print photos as full page images, without the email content. Is there anyway to confirgure the HP eprint function to print the email text and photos or PDF file attachment on one page? Thanks.

Hello @Joseph_TX ,
Welcome to the HP forums.
I understand that you want to know if a way to configure the HP ePrint.
I would like to help.
Unfortunately there is no way to reconfigure the ePrint.
When you send an email to the printers ePrint address, it will print the body of the email and any attachments.
It will not print the subject line or who the email is from.
Also the ePrint feature will not resize pictures sent.
What you send is what you get.
You can get more control over ePrint with the ePrint app, but I don't believe that will suit your needs.
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Not able to print photos correctly anymore

Hello
I have a hp officejet 5610 that I am unable to print photos correctly now. Here are the details:
1. When i try to print photos from any program (photoshop, image ready, or any other windows program), it prints it like a charcoal photo. (Note: When I scan the photo in, it is scanning beautifully).
2. When I place the photo on the scanner and copy it, it copies it just like a photo. Beautiful.
3. Both the color and photo cartridge are brand new. In fact, I have tries two sets of new cartridges.
4. Using Windows Vista
5. Directly connected via USB.
6. Have printed photos on this printer for the past two years. Am certain that I am selecting the correct printing preferences. (Photo printing, 1200 dpi, etc.)
7. I just uninstalled and reinstalled the printer software from hp.
Any help would be appreciated.
Thank you

sannbox wrote:
It still shows one of the PDF pages on one sheet...!
Do you mean that this is the printed output or that this is what's shown in the preview window on the left? If the latter, try saving ato PDF with those settings, as a test. There was a problem that the preview window didn't update to reflect the layout settings but that the job printed correctly. Maybe this is what you are seeing?

Printer goes missing on airport extreme

How do I get my airport extreme to recognize my wireless printer

You really asked two questions - printer goes missing and how to get the Airport to recognize the printer. Does it initially recognize the printer then it disappears? When it disappears does it really (on the front of the printer: Setup > Network > Wireless Network Test) or does it just disappear from your Mac?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printing Photos through ePrint

If you can email it, you can print it. That is the idea behind the ability to use ePrint. Send pictures to your printer while you are out and living in the moment. Then go home to find mementos of your evening’s activities already waiting on you. For tips for printing photos through ePrint, please check out the following link here.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?
This question was solved.
View Solution.

I hope that the community finds this to be helpful and informative.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Hp psc 1315 - printing photos - missing 1.4 inch at the bottom

Similar Messages

Maybe you are looking for