HP Solution Center Disappeared

My updated HP Solution Center software which allowed me to scan documents as .pdf files with my Officejet Pro L7590 has somehow disappeared.  I've updated the drivers after upgrading from Vista to Windows 7.  I had been using the Solution Center for quite some time after the upgrade.  I tried to used the software disc for windows Vista to reload it. I'm getting an error message which seem to say that my 32 bit system is not supported.  How do I get the Solution Center back?

Hey there SIfatunji, welcome to the forums!
I understand you have upgraded from Windows Vista to Windows 7 and are no longer able to use Solution Center. I am hoping to help you fix this issue!
First of all, uninstall the printer altogether: Uninstalling the Printer Software
Restart your PC
Reinstall the printer by downloading the Windows 7 compatible driver here: HP Officejet Pro Full Feature Software and Driver
Please write back with the outcome, I hope to hear some good news!
Enjoy your Tuesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • Lenovo Solution Center disappears from taskbar upon restart

    I am using a Lenovo Thinkad Twist with Windows 8. I currently have set the Lenovo Solution Center to appear on my taskbar under the taskbar properties. However whenever I restart my computer, the taskbar somehow 'forgets' my settings and the Lenovo Solution Center disappears from my taskbar. I have to manually select it again under taskbar properties.
    This does not happen if I shut down the computer and turn it on again, it only occurs when I restart it. Any help? Thanks!

    I have not seen this problem myself so I asked LSC team about it.  They said they have seen it once but they rebooted and then LSC worked after that.  I assume you tried rebooting and the problem still happens?
    There is a log.txt file inside folder "%appdata%\LSC\Local Store", can you please put it in dropbox/yousendit/etc and post the link to the file here?  thanks for your help.

  • SOLVED: Can't get CM 1015 printer to scan: where is the "HP Solution Center" ?

    Hi,
    I have a HP cm1015 printer.
    Recently win8.1 was installed, and I had to reinstall the printer.
    I downloaded drivers from the hp site, but I can't get the printer to scan.
    It prints, and copies ok, but scanning doesn't work.
    What is unclear:
     If I go to the download driver page, I can download 4 different kind of drivers.
    I can choose between :
    Driver - Universal print Driver
    - for windows PCL6
    - For Windows Postscript
    - for windows PLC5
    Software - Universal Print driver
    - HP Printer administrator resource kit.
    I chose 
    - for windows PCL6
    The "HP Printer administrator resource kit.": are all different files. Don't know what to do with it.
    To scan I should be able to get into the "HP solution Center", according to the manual.
    However, after downloading and installing the "windows PCL6" driver, I don't see that center on my PC.
    So how do I get the HP solution center ?
    Thx!
    Solution: http://h20564.www2.hp.com/hpsc/doc/public/display?​docId=emr_na-c03506225

    Problem 1: HP Solution Cntr could not detect any devices and closed down
    Solution???  I downloaded, uninstalled and re-installed the driver  successfully.....but could not "add the device" in the last step even if I followed the instructions carefully:  a) make sure device is powered on
                                                                                                              b) connect USB cable
    Per Control Panel, printer is "ready" but does not print. 
    Problem 2: My HP Solution Center disappeared.  How do I re-establish connection?

  • I no longer have Solution Center on my computer

    I have an HP Photosmart C7280 All-in-one printer. When I try to access the Solution Center I get a blank page. I wondered if the new, troublesome, Adobe Reader X was at fault since the Solution Center disappeared around the same time as I downloaded X.  I uninstalled and reinstalled my printer software a few hours ago. It did no good as far as Solution Center is concerned. I then changed from Adobe X to 9.4.1. Solution Center is non existent. What could be the problem?

    Sounds like they are not Pages '09 files, they are Pages '08 files which Pages 5.2 can't open.
    You need to reopen the Pages '08 files and resave them in Pages '09.
    Why do you no longer have Pages '09 on your computer?
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=aa60a1fe16b6 c5ff3a2e9d574f7375db&mforum=iworktipsntrick
    Peter

  • The Scan does not appear in HP Solution Center

    My HP4180 Solution Center does not show a scan option on it but it has the capability to scan for some reason it disappeared when an update was done how do I get this back on the Solution Center?

    Welcome to the forums @CafeLatte ,
    I understand your Solution Center is not working properly after an update was done. I will do my best to help!
    Please let me know which "4180" you have and which OS you are running.
     HP Photosmart C4180 All-in-One Printer
     HP Deskjet F4180 All-in-One Printer
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Thank you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Need HP solution center software for hp psc 2110 running windows 7 32 bit

    Hi,
    The HP Solution Center Software has disappeared since I upgrade my HP laptop OS from Vista to Windows 7 32 bit.  I use the HP Solution Center Software for years to create .pdf documents from the scanned documents of my HP PSC 2110 All-in-One printer.
    Can you provide the link to download the HP Solution Center Software for Win 7? I searched the HP support website using the product name HP PSC 2110, it pointed me to the driver section; I followed the instructions however there is no link to download the the software.
    The printer is connected via USB and works well.  It is just annoying I cannot use the HP Solution Center Software (previously HP Director) to copy scanned documents to my computer.
    Thanks.
    This question was solved.
    View Solution.

    You are welcome.
    You may download it from the following link:
    http://sourceforge.net/projects/naps2/files/3.0b1/​naps2-3.0b1-setup.exe/download
    That means that as an older model its functionality is limited but there are some workarouds available. it surely worth trying.
    For a Wirelss printer you will need a different printer indded, there are many factors to consider and recommend you any specific printer, do you have any specific needs? for example would you use a fax or not, I assume it should be a color printer with a scanner... do you use to print photos or use it more often for a daily printing and scanning capabilities, those factors may highly affect any possible recommendation so further clarification will be helpful.
    Regardless, any current HP device with a scanner fully support scanning PDF scanning within the HP Software.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I get to HP Solutions Center?

    I cannot find any HP Solutions Center on my computer.  
    According the the Troubleshooting page on the HP website, I navige Windows Icon --> All Programs --> HP --> HP Solutions Center.  But there is no HP fine under all programs.   I have followed the instructions for downloading Driver Software.  Even though I have downloaded the softward, nothing is happening and there is still no HP or HP Solutions Center under All Programs.  In my Downloads file there is an installation database titled HPSupportSolutionsFramework-en-11.51.0048.  But when I click on it and click Install, I still cannot find any HP or HP Solutions Center under All Programs. 
    I still have the original disk, but when I put it in my computer, nothing happens.  I uninstalled by printer and printer software and tried again, and still nothing happened.
    Incidently, there is a HP support page that allows me to send a message to a technician.  When I click next, the page disappears and I am taken back to an earlier page, with no indication whatsoever that my message was sent / received / acknowledged, etc.  What is up with that?  Very unhelpful. 
    This question was solved.
    View Solution.

    Hi,
    I assume the issue is more related to the download and not to the installer itself, the HP Solution Framework is only meant ot allow downloading the installer for your printer.
    Right click and save the following installer to your desktop by selecting Save Shortcut As.. and then launch it and follow the instllation:
    http://ftp.hp.com/pub/softlib/software12/COL27506/al-68493-5/DJ_AIO_05_F4400_NonNet_Full_Win_WW_140_...
    Please let me know if that helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • 'Unknown device' in Lenovo Solution Center, but not in Device Manager

    Even with all the latest updates installed, I still get this annoying warning from Lenovo Solution Center
    'Unknown device' - status 'not installed' 
    Control Panel / Device Manager gives no signals something is wrong.
    why?!
    Details:
    Computer: Thinkpad Yoga (TPY)
    OS: Windows 8.1 all updated
    Lenovo Solution Center version: 2.2002 / revision 17630
    External device attached to TPY:  OneLink Pro  (also has latest driver = Realtek 8.10.1009.2013)
    Thanks in advance
    Olof

    henk wrote:
    It seems to me you are missing some update from Lenovo. I had the same issue, however just recently after updating any available software/drivers for the TPY the message has disappeared.
    Glad to hear the problem is solvable. Regarding missing updates, I honestly would not know which one. 
    Lenovo's own update programs ('L-Update and Drivers' & 'L-System Health and Diagnostics') inform me that all drivers are up to date.

  • Can not install Solution Center

    Hi,
    i just got a new SSD, and now i had to install windows again.
    But after i installed windows i want to install the Lenovo Solution Center, but it wont install.
    It shows a strange Error Msg its in german so i translate it : 
    Database : The Control Table coud not loaded in to the SQL Query SELECT 'Control' Type X Y ......
    Also when i try to use the Programm ThinkVantage System update it doesent work, it stops with the error :
    There was an error with your login data.
    Any one any ideas?
    thanks,
    syd

    I have the same troubles. My orginal HDD crashed so i had to buy another one, i didnt have a recovery disc so i installed windows directly from CD and i've been downloading drivers after that. I don't know why i cant install lenovo solution center, HELP!

  • How do I download the solution center to my HP Touchsmart 310 pc

    I have a HP Touchsmart 310 PC with the Windows 7 operating system.  Back in January I started having trouble logging in on my page.  I was the only admin on the pc, so I could not access certain information or make any changes to the computer.  I finally erased everything in the computer memory and started over from scratch.  I have an HP Photosmart printer that I use, but when I re-installed the software, it did not include the hp solution center, so I can't scan any documents or photos to my pc.  I need help!

    Hi,
    Please let us know what is your printer, hope we can help.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • SOLUTION: Get Win 7 Printer Drivers/HP Solution Center to Work on Windows 8

    Took me some time to figure it out, but I got it to work.
    First of all, the preliminaries:
    I have an HP dv9700t laptop running the 64-bit version of Windows 8 Pro RTM (not the preview, but I assume it will work on Preview as well).  My printer is an HP Photosmart C7280.  If you have a different printer, it is possible that something similar to how I solved my problem will help you, especially by running your installation files in Windows 7 Compatibility Mode.
    Windows 8 does come with stock C7280 printer drivers that work by going into Control Panel>Devices and Printers>Add A Printer, but there's only limited functionality with those.  As such, I wanted to run the HP installation files to have increased functionality.
    Unfortunately, when I ran the full installation file from HP for my printer, there was no "Install a Printer" button, or any of the other usual buttons.  There was only an "Exit" button.
    Here's how to get it to run and install properly.
    Right-click on the HP Full Installation file, then Properties>Compatibility>then check the box for "Run this program in compatibility mode for:", then select "Windows 7" in the dropdown box, then Click "OK".
    Run the installation file as you normally would in Windows 7.
    I tried this two ways.....the first while connected via USB cable.  It worked just fine with no errors.
    I also tried it with the printer connected to my network via WiFi.  Ran into some problems.
    The installation program would detect my printer just fine, and I clicked "Next" or "OK" or whatever the prompt was to install the printer.  The installation would hang on "Reply from SNMP" (or something similar) and it would list the IP address of my printer.  I waited, waited, waited for an hour, and it wouldn't get past this.  Not to worry.
    Proceed with normal installation until you get to the "Reply from SNMP" message and the installation stops responding.
    Enter the Task Manager with CTRL-ALT-DEL.  You'll see an entry in the "Apps" for the HP installation program....LEAVE THIS ALONE.
    Below the "Apps" list you will see the "Background Processes" list.  In this list is something along the lines of "HP Network UI", or something similar, consuming a significant amount of CPU.  Highlight this entry, then click, "End Task" at the bottom.
    The "SNMP" window will close and your installation program will then finish normally and your printer/fax/scanner will be properly installed.  HP Solution Center works normally, as does printing, scanning, etc.
    Will the next person who uses this give some feedback and also answer some questions for me so I can update this post with more specific information?
    Please let me know what the exact "SNMP" message is when the installation hangs.  Please also let me know the exact name of the "HP Network UI" background process is, as well as the HP Installation app name.
    Hopefully this will help you.
    This question was solved.
    View Solution.

    thanks for the solution. I have an HP Photosmart D110a wireless printer. Windows 8 installed a generic printer driver that worked fine for printing but I lost all functionality to the scanner of the device. 
    I tried to follow your instructions. I do get an error at some point when the software installer tries to talk to the printer and it gives an error message. It finds the printer OK but stalls. The error message is different and merely reports that there is a problem, no further details. There is indeed a background task "HP Network UI" or similar but ending this task doesn't do anything on my system. The Network UI task ends and the error message stays open. I ended a couple more background tasks but it would not go anywhere.
    I then uninstalled the entire package, unplugged the printer, turned its wireless feature off and reinstalled the software in Windows 7 compatibility mode. When it asked to plug in the printer to the USB it finds it right away, the installation continues and is almost finished when it stalls again. This time it reports that it has a problem again and needs to uninstall. Still with the error message and installer open I open the installed "Solution Center" and I can find the printer fine (it actually lists two devices, one being grayed out). It initially gave me an error message when I tried to scan something, but ignored the error. Eventually the scanner worked as intended. I force ended all installer tasks in the task manager and the Solution Center works fine and does all tasks it did under Windows 7, now in Windows 8. 
    thanks again for the post

  • HP Solution Center stopped working and HP Print and Scan Doctor cannot find my OJ4680

    HP Solution Center came installed on my HP G60 notebook with Windows 7 premium 64 bit.  It suddenly stopped working--it says it cannot run because the device installation is not complete.  If I open HP Sup0ort Assistant it says the OJ4680 is ready and it is designated as the default printer in Printers and Devices but when I try to run HP Print and Scan Doctor it cannot find it--it can only find OJ4500 which I use when I'm in my second home.  Please help me fix this as at this point I can't print or scan. 

    Thanks for the help and quick response.  I haven't tried your solution yet because before I received your instructions I updated the drivers again and it appears to be working though I've had a message since then that I couldn't scan because my device was offline which was not true as I had just printed a document.  I used HP Print and Scan doctor and followed the steps which included turning the device off and unplugging it for 60 seconds.  I can now copy, print and scan but I still have the yellow triangles with exclamation points on both my PC and all in one.  I'm not sure I want to do more at this point since everything is working well at the moment. BTW my laptop is set for automatic updates by HP and Microsoft, why didn't they keep this problem from occurring?

  • Win 8 - Photosmart c4580 not scan with wifi miss HP Solution Center

    HP Photosmart c4580
    Windows 8 64-bit
    My printer is the Photosmart c4580, and i have the Windows 8 64-bit OS.
    I can print throw my wi-fi connection, But i can't scan.
    If i want scan i must plug the usb cable (10meters long because the printer is in the other room).
    I want to see the ink level and i can't because i i don't have the HP Solution Center in win8.
    Try installing the win7 drivers and Solution Center  (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (Proprieties - run win7 mode), and the program crashes.
    What can i do for scan using my wifi connection and installing HP Solution Center
    Thanks
    This question was solved.
    View Solution.

    Everything is ok now with the new drivers.
    Thanks
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109997-1&cc=uk&dlc=en&lc=en...

  • C6280 HP Solution Center will not run or install

    I have been using my C6280 on my home network for years with Solution Center intalled on a desktop running Vista andtwo laptops running Windows 7 with only the print drivers installed. HP Update was eanbled on the desktop.
    In the past two or three months, I started to get a number of error messages on my desktop indicating there was something wrong with Solution Center. The issue steadily worsened to the point where Solution Center would not run at all (unable to detect device seemed to be the most recurrent message) and I was unable to run the scanner.
    I was able to maintain printer fnctionality by deleting and then adding the printer through Windows, although I seemed to be forced to do this every few days.
    I went on the forum and decided the best course of action to restore full functionality was to uninstall all HP software and then download/install the software suite. I downloaded the Vista 32 bit version  (100_228_PS_AIO_02_Full_Net_enu_NB.exe) andI tried installation several times with no luck - the installation always seemed to get stuck immediately after extracting files.
    I went back on the forum and found out how to do a level 4 uninstall from a temp folder beginning with 7z... . I did that and tried again (after checking that my Adobe Flash was up to date).  The install went a little further this time but eventually stopped again. File not found.  I ran the installation .exe from the temp file and went a little further but stopped again. An error log was created and a 'fix' was placed on my desk top. I followed the instructions but the 'fix' did nothing (it was just a text file - nothing to run that I could decypher). Just to make sure I was doing it right, I repeated the entire uninstall/download/reinstall process two more times with the same result. 
    The above process was beginning to remind me of Einstein's defiition of insanity (do ing the same thing over and over and expecting different resuts) so I gave up and successfully downloaded and installed the printer drivers to restore print functionality.
    How do I get my scan functionality back?
    Thanks
    This question was solved.
    View Solution.

    Hi,
    May you have McAfee Antivirus on your PC?
    If so try following the steps belwo and let me know if that may help:
    1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select Never and confirm by clicking the Turn Off button.
    2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
    3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
    4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
    5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
    6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
    7. Reboot your PC
    8. Run the installation file and check for any difference.
    9. Once you are done, be sure to open McAfee and re-activate Real Time Scanning.
    If the issue persists, please clarify what security software you are using,
    As well open the device manager and expend the Processors category - what processor you have on your PC?
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Solution center will not recognize J4680 in wifi

    My J4680 will print a document in wifi so I know my computer and printer are communicating.  I have reinstalled the software and I am still able to print.  However, when I open HP Solution center to check ink level or scan an item it will not recognize the wifi printer.  It will recognize it as if I have the USB connected.  This defeats the purpose of having wifi options if I cannot communicate with the printer except to print.  I cannot even run diagnositics like cleaning printer heads etc because HP Solution center will not communicate via wifi.  Solutions?

    That link is not working for me at the moment either @judomax , perhaps if you wait it out for a few hours or a day it will be back up and running. It is possible there are changes being made to the page. It would be nice it if said "under construction" or something of that sort, but in the meantime I guess we sit and wait.
    I will keep you posted if the link is no longer valid and the Print and Scan Doctor link changes. I will keep an eye on it.
    Thanks for letting me know.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for