HP1200 Laserjet Driver not installing on Win 8.1

I'm trying to connect and install an HP 1200 printer to my Pavillion 500-118, which I have recently upgraded to Win 8.1. The HP Support site shows a driver for Win 8 and 8.1 (USB), but after I download the .msi file nothing happens. Not clear what I should do next.

There is no HP driver for Windows 8.
Take a look at this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

Flash Player 10 Not installing on Win 7 64 bit PC

Flash Player 10 download goes through install procedure and says it is installed but it is not.
After that There is always a Flash Player Install file on the PC.
When I click on that it goes through the install procedure and says it is installed but it is not.
Have tried above install more than 6 different times. Also on my wife's new PC.
Always the same bad result.
These two new PC's are both on WIN 7 64 bit OS.

I tried the suggested method of uninstall and then install. Also the disable instructions for Norton AV.
Still no success. When I again check the list of programs in Control Panel for possible uninstall the Flash Player 10 has returned there.
But the player does not play when needed for some videos on Facebook, etc.
One thing I could not find to disable on Norton AV was "Smart Firewall." It was not in my NAV 2011.
Any other suggestions appreciated.
Frank Mitch
Date: Thu, 24 Feb 2011 11:51:01 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 Not installing on Win 7 64 bit PC
Hi, I would try this method and see if it works better. There is a link for FF(Firefox) If you don't use FF, ignore that. Also before you begin this procedure, I need to know what Anti-Virus/Spyware programs you have Installed. Some will block the Install of Flash Player and that needs to be taken care of first.
Download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE to your Desktop the Installer for IE- use the EXE Installer
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Download and SAVE to your Desktop the Installer for FF- use the EXE Installer for plugin based (from the same site)
Close all browser windows, you only want to be looking at your Desktop.
Disable any messenger services, as yahoo, msn, etc in the system tray(area near the clock)
Be sure to use the Administrator Account.
Run the Uninstaller and when finished, Reboot(restart) your computer.
Run the Installer for IE, Run the Installer for FF(If needed/used) and when finished, Reboot.
Then go to this test site and test each browser:
http://www.adobe.com/software/flash/about/
You may want to print these instructions to make it easier to follow. If you have any questions, let me know.
Thanks,
eidnolb
>

Hp Officejet Pro 8600 on Windows 8.1 driver not installed

Using Windows 8.1 and HP Officejet pro 8600. The printer is installed on a wireless network. But on Device Manager, it says "driver not installed". Most printing tasks are successful, but for some I need to have the driver installed on the computer. I have tried troubleshooting, but am unsuccessful. I would appreciate help. Thanks

Hi emax,
Print a configuration page to get the printer's IP address. Printing a Network Configuration Page.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Power cycle the router, computer and printer.
Try printing again.
If the issue persists, add a new device if the IP address is valid.
Right-click the Start button () or the lower left corner of the screen, and then click Search.
In the Search box, type HP, and then click the icon for your printer. The printer software opens.
Click Utilities, and then click Printer Setup & Software Selection.
Click Connect a new printer.
Test the printer over the wireless network.
Please provide the following information so I can assist you better.
What is the printer's first 3 sets of numbers for the IPV4 address?
Could you access the printer's EWS?
Were you able to add a new device?
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to deal with the "driver not installed" message?

My issue, and it seems many others here have it too, is how to install a printer driver in the face of the "driver not installed" message.
In my case, it's an HP4160 Rendevous printer. I've deleted the com.apple.print files in the Library, reinstalled the software, made sure that BDC package, or whatever it's called is installed, even downloaded and run the printer fix software from Fixamac.
Nothing works.
I have the feeling this isn't a printer or driver-specific issue, but is an OS problem. Does anyone have a suggestion?

It appears the Deskjet 4160 will not work with an Airport. Connected via USB, the driver installs normally and the the printer appears to run just fine, although I haven't done much with it yet.
It simply will not work on a wireless network through an Airport. Frustrating, but workable by bringing the laptop to the printer.

TCP / IP Protocol Driver - not installed (using Windows 7 Home Premium (64 bit) Service Pack 1

I am using a ThinkPad T520 laptop. Lenovo Solutions Center keeps referring me (with a yellow exclamation mark) to the Device Manager and alerting me to a "non-critical" error. The message is "TCP / IP Protocol Driver - not installed".
I have found numerous pieces of advice for Windows XP and Vista - but very little for Windows 7. I have however tried the Microsoft "Fix it" solution and it had no effect.
I am still able to connect to the internet via Ethernet cable and wifi. It is however worrying that the warning keeps being raised.
Does anyone know how I can fix it?

Hi Tripplec.
Thanks for the reply. I am away from home at present without my ThinkPad, so will try it at the weekend. I am an experienced computer user but this is a brand new machine and I have never had a laptop that produced error messages without providing any suggested fixes. It seems that Lenovo is not suitable for ordinary home users, but only for computer engineers. Sadly that is not me... so before I plunge in, can I just check some details?
1. You suggest removing the offending network adapters in device manager. Which are the offending adapters that cause a TCP/IP protocol driver error? I am nervous of removing the wrong things and making it worse!
2. You also suggest that I go to Network Connections via Control panel, properties of adapter, Install and select the desired Protocol(s) and install them. Is that an alternative fix to 1 above - or an essential follow-on after removing the offending adapters? (Last week I searched the machine and the Lenovo support page of drivers - and never found a TCP/IP protocol driver. If you know where one can be found, I would prefer to instal a new driver, rather than delete other devices and hope that the machine reinstalls them later!).
Much obliged for your assistance.
Fillet

Problems adding USB printer - "Driver not installed" - but it is

Apparently, 10.3.9 has some problems with USB printers. For the record, I had already installed this earlier prior to the upgrade and everything worked fine - but due to crashing due to a faulty power supply - I've had to re-configure everything.
I, and many others in this forum, have found a strange problem when trying to add a printer (And yes, other people have asked about this but I haven't seen any answers at all that are useful. The only possible solution seems to be "upgrade to 10.4" and that is unacceptable. Does Apple check these forums?).
After clicking "add printer" in the utility, the software finds the correct printer (so obviously the physical connection to the printer is OK) and displays it with a question mark over it's icon and "driver not installed" next to it. I can't select this image or text.
After searching for a couple of minutes, a dialogue box pops up saying "New drivers detected. Do you want to reload the browser?" (I assume the printer setup utility is the "browser"?).
I click yes and nothing happens. No PPDs show up in the list. This happens when I select USB as well as Apple Talk from the printer-type pull-down menu.
How can I start printing again?
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)

First, welcome to the discussions.
For the record, Apple does not normally respond to these Forums.
You mention (Due to Crashing) Whenever you have an issue with your machine it can disrupt in almost any area, and is normally caused by SOMETHING.
As of right now it would appear you might be chasing your tail.
When you choose to upgrade your Operating System there is No Guarantee that your Printer and it's drivers will work on another completely different Operating System.
Your best bet at this point is to drag all of your printer related folders to the trash, empty your trash, and plug your USB Printer (What KIND) into your machine directly.
Shut your machine clear OFF for a minute or so and do the same to your printer, pull the power adapter from it.
Now plug in your printers Power Adapter, Plug in the USB to your Printer to your computer and restart it.
Take the Disc that came with your printer and re insert it and download the Installation Folder and any utility folder that may come with it.
After you have done this don't try to print, Go directly to your Printer Manufactures Web site and search for the latest updates to your printer and the Operating System you are using.
These will more often than not download to your desktop.
You must drag these to the setup folder and or the utilities folder and then double click them to launch them. after you have completed this your printer should work.
One other thing, If you have Classic and or OS9 on your machine you might have to do the same for OS9 Applications , and Utilities for it to print in Classic. Don

PSE Backup wouldn't work: "CD device driver not installed; install PSE" didn't fix problem; Win7

I'm trying to backup by photos for the first time! in Photoshop 5.0 on a Windows 7 system. I get to "Full Backup" option, and get a pop-up that says "CD device driver not installed; reinstall PSE". I put my PSE disk into my computer, select "Repair... installs... missing files"; PSE re-installs, but I get the same message again when I try to backup. How do I find a CD device driver? (My DVD is formatted, but PSE can't find it.)

I just found a photoshop elements 5.0.2 update "patcher" and installed it. The install was successful but I still got the same message saying "CD device driver not installed". Might there be a problem since I'm now on Windows 7 and no longer on XP? I have no need to buy a newer version since Elements 5.0 does everything I need to do. Any other suggestions?

W540 FaceTime HD Camera (Display) Driver Not Installed

My new W540 (11/10/2014) Lenovo Solution Center under the Check-up tab alerts me that the FaceTime HD Camera (Display) Driver is Not Installed. Such as it is, the camera, a 720P HD, works just fine. A search of resources does not uncover any comment or Driver on this issue. So, since there is no problem as near as I can determine, should I just ignore the lack of Driver issue, and if so, what is the procedure to stop the Solution Center from alerting me to this error? But if on the other hand I should install the Driver, where is that to be found?
MTM 20BG-CTOWW
Other comments not related to the Subject:
I'm using the W540 in the Ultra Dock with video on a second monitor, an Apple monitor, using a Thunderbolt cable. There is no Thunderbolt port in the Dock, so I use the W540 port which surprised me that it works.
FWIW, it is taking me a lot of time learning the location of programs and utilities having moved from my old W510 Win 7(64) setup to the W540 Win(64) 8.1 setup.
W540 20GBCTO, Ultra Dock, W520, 4270CTO, W510, 4318CTO; (2)T500, 2081CTO; Y560, 064657U, Y530, 405166U; T61p, 6465CTO, A31p, and L2461x Multi-touch Monitor, Mini Dock Plus Series 3
Solved!
Go to Solution.

It is not a problem with the ThinkPad's camera. It is the camera in the Apple monitor that you don't have drivers for.
Being Apple, they might not even make driver for Windows.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

HP Security Manager 7 not installing in Win 7 (64 bit)

Hello Tech Gurus, This is very surprising. I was using HP Protect Tool Security Manager 7 for last 3 years. But there were some problems due to which I uninstall all the HP security softwares and tried to install Validy Finger Print Driver, Security Manager, HP Face Recognition software. So I downloaded the latest driver from the below HP site. https://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5229456&swLangOid=8&swEnvOid=4059 sp57486 - Security Manager (7.0.1.1199)sp58940 - Face Recognition for HP ProtectTools (7.2.1.4548)sp64338 - Validity Fingerprint Sensor Driver (4.4.228.0) Fingerprint Driver got installed but Security Manager and Face Recognition software is not installing.When trying to install Security Manager its saying "This Software is not supported on this system". Its not possible because I have used the same software earlier. Even I tried to install previous version of Security Manager which I downloaded 2 years back and woked fine also. But getting the same error. I am not able to understand how to resolve the issue? Can anyone please help me? System - Probook 4540sOS - Win Prof 7 ( 64 bit) Thanks,Suvendu

USB-Parallel converters can be problematic. The models listed in posts flagged here have been verified by users to work with 64 bit Windows 7.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Wireless Driver Not Installing

Hey guys,
i have a Dell 14R (n4110), i upgraded to win 8 and after a week my wireless driver just disappeared and couldnt reinstall. I downgraded to win 7pro and had the same prob. Then i reinstalled win 7 home premium (which originally came with my laptop) and i'm
still having the same prob, i tried all the drivers for my model on Dell's site. Please assist, thanks!.
Regards,
Jevon.

1.Reinstall driver from Dell support page
http://www.dell.com/support/drivers/us/en/19/Product/inspiron-14r-n4110
2. You may need to uninstall driver before installing new one. Follow the procedures here
http://www.thewindowsclub.com/uninstall-disable-roll-back-update-drivers-windows
3. Do not use optional drivers that comes with Windows Update
4. For troubleshooting see into Device manager and Event logs and share your findings
Regards
Milos

Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Adobe Acrobat 8 - file updates not installing on Win 7 Professional

How do I install MSP file updates to Adobe Acrobat after downloading them? I have just installed Acrobat 8.0 from the original installation CD on a new PC running Windows 7 Professional (64 bit) and have downloaded the update to 8.1.0 to begin with, but on clicking it get the error messsage 'This patch could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package'. Updater is not working at all. It says it cannot find any updates. Even when I place the MSP file in the Updater folder to which it is supposed to download updates, it does not find updates. What is wrong? Why won't this patch install? Thank you! I really don't want to be stuck with 8.0.0 when I know that years of updates through to 8.3.1 are available, but for some reason they will not install intuitively.

Hi ,
Acrobat 8 is not compatible with Win 7. Please find the mentioned Kb: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-produ cts.html#main_System_requirements_for_Acrobat_8_Pro showing system requirement for installing Acrobat 8. As Acrobat version 8 is very old product so I would recommend you to purchase Acrobat11 which has more enhanced features and functionalities.
Regards,
Romit Sinha

Ethernet Controller - Driver not installed - Compaq Presario

Hello, I am new here so be gentle
I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
Details in properties show the following: drivers for this device are not installed (Code 28)
PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
Thank you in anticipation.
This question was solved.
View Solution.

Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

Itunes 12.1.0.71 will not install on win 7 error 1053

I have a BIG problem...cannot install 12.1.0.71...The install gets about 90% thru and then I get the error....Windows could NOT start Apple Mobile Device Services error 1053...The Service did not respond......after trying all the solutions I found online I called Apple support and paid 99$(which was not refunded) and two of their techs...the supposed top level Cathy...was unable to help....after two hours of work....they can remotely see and guide me as to what to try and it was mostly what was published online at apple support re how to really uninstall Itunes properly which we did about 6 times...and still it would not get past the "windows could not startt AMDS and errors 1053 and service did not respond and error 7 win error 193 and itunes helper not installed correctly....those later errors occur when you ignore that AMDS did not start...etc....
So I am kind of stuck....
Other things we tried....Disable Norton....Clean the registry using Norton Utilities....No other hidden Viruses around all clear on that....Win 7 totally updated....used the windows service that checks just about every kind of possible bug in system from the MS site...no help there...
In the whole process I lost the ability to restore to an earlier version that worked that disappeared off the restore calendar.
SO HELP!!!!!!!!!!!!!!????????????

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Photoshop Elements 12 does not install on Win 8.1 64bit

Hi!
My system: Windows 8.1 64 bit with all patches, 32GB Ram and engough HD space.
I downloaded PSE 12 32bit and Premiere Elements 12 64bit. Both won't install.
Problems:
Premiere: Installation fails when shared components should be installed. I spent more than 2hrs trying every tip I found in forums. Same result.
Photoshop: It always tries to deinstall Elements 12 (which is definetely not installed) and fails becaus of "Specified path is empty". It was never fully installed. I cleaned all folders manually, I deleted registry entries according forum advise. I rebooted. I put the installation files onto C:. Before I installed, I deinstalled Elements 9. I also cleaned those files. An no, I did not deinstall my Antivirus. I cannot deactivate it and deinstalling is a very very bad option.
What I already tried:
10 reboots
Deinstall old version
Clean Temp folder
Clean Registry
Delete all folders and hopefull all registry "Elements" entries
Archive OOBE Folder
Moved installation Files to C:
Start Installation as Administrator
Monitored if any other Adobe program is running - killed all
Any help is much apreshiated. I am desperate and about to return the products.
Michael
Added solution attempts.

Ok, I had many problems with the installation, but after three attempts I've got it working. This might work with a previously failed installation - but there are other guides in the forum to get this position -thanks also to the many threads on the this - which pointed me in the right direction
Previously I'd had issues with Error 1935, (on Shared Technologies), Blue screens due to clbudf.sys from Cyberlink Instant burn which blue screened (thread abort exception) this install as also iTunes. (I haven't installed this now...
My scenario. Win 7 (clean) -> Win 8 -> Win 8.1
After setting up the setting up the system.
I ensured the following : (although begrudingly) so I could do a system restore if needed.
-I disabled Anitvirus & Firewall
-enabled Volume Shadow Copy Service
I then ensured I had downloaded Adobe Application Manager 8.0 (read this may help) - I installed - but I did not run it as I believe it updates to Adobe CC Manager( from previous attempts)
i also downloaded and installed the 32 bit versions of :
C++2008 redistributable (32 bit)
C++2008 SP1 redistributable (32 bit)
I installed Premiere Elements (64 bit) - note I had previously installed Sony Vegas 10 Platinum, which downloaded and installed NET 3.5/Net 2.0 adding to windows features, which many have helped - not sure.
I installed Photoshop Elements (32 bit)
I started both apps and updated them to 12.1.
Happy ... finally - hope this helps others - or at least helps adobe improve their installer, diagnose the issue for others.

HP1200 Laserjet Driver not installing on Win 8.1

Similar Messages

Maybe you are looking for