Hp2640 all in one copying problem

I need help with my hp deskjet2640. It has been doing ok but all of a sudden it started giving me blank copies. The machine is hardly a month old and the ink levels are half way. Please help.

Welcome to the forums @Ralph87
I read about how your Deskjet Ink Advantage 2640 is now printing blank pages. I would suggest that you use the guide below for your troubleshooting steps.
Fixing Print Quality Problems for the HP Officejet 2620 All-in-One and Deskjet Ink Advantage 2640 Pr...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Hp c6180 all in one scan problem

Hp all in one C6180 printer/fax/scanner/copier will not recogonize handwritings so as signatures. The letters and number print as characters ? ~ ! and some caps. I Appreciiate your help.

HI there marlenes,
This is generally going to be a limitation of OCR software in general. Despite how nice our handwriting can be most OCR does not pick it up as expected. However, software changes all the time and there some handwriting recognition software suites out there (depending on what you are looking for). Throw a search into google for "ocr software that recognizes handwriting" and there are a few links out there. Let us know if you find what you are looking for.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp 8600 All in one printer problem with scanning through wired network its very slow!

Hi
i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB. i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning?

Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Photosmart C3180 All In One Installation Problems

A while back I posted about problems with installing this printer, where the install cd v7.8.0 worked but the HP Set Up Assistant hung on the 2nd step. The software on the hp site for this printer (v7.9.1), did not work either, and froze mid install (couldn't even get to the set up assistant). HP support couldn't help me, repairing permissions didn't work, neither did resetting the printing system. I even tried updating cups and it didn't help either.
I found a way to get the printer to work by choosing HP Photosmart P1100 - Gimp-Print v5.0.0-beta2 in Printer Set Up Utility, but since I never completed the HP set up assistant, it came up every time I turned on the computer. But, I could still print.
Then one day I couldn't print, and when I went to Printer Set Up Utility, every driver I picked resulted in the "An error occured while trying to add the selected printer...server-error-service-unavailable", even the one that worked before (HP Photosmart P1100 - Gimp-Print v5.0.0-beta2)
What finally worked to get me back in the land of the printing was to do an archive and install of the OS and re-installing the latest OS update, then reinstalling the v7.9.1 software from the hp website. I have no idea how things got so messed up twice, but I thought I would share what finally worked just in case it helps someone else out there...
Mini Mac OS X (10.4.8) 1.42 GHz PowerPC G4

You are not alone.
I am having EXACTLY the same problem with my HP Photosmart 3210 All-in-One. Step two of the HP Setup Assistant stops me dead in my tracks. No printers are listed. Scan Utility just crashes upon opening. The System Profiler lists the printer in both the Printer section & the USB section. I installed the new HP (Universal) 7.9 dmg as an Update; worked fine until I tried to scan. It will do everything, except scan.
Most recently, I did a System Archive & Install (after many MANUAL* printer uninstalls & reinstalls of HP software....), then applied: MacOSXUpdCombo10.4.10PPC.dmg, (brings all up to date in one step).
And a fresh install of HP Universal 7.9.....no change. I did notice that one set of instructions (for installation) said not to have the printer connected until prompted by the software (which never happens). Another (most recent) said that the printer MUST be conected (and 'on') BEFORE beginning the software installation. Neither one worked. And Hp hasn't been able assist any further. If they come up with something, I will post.
Oh, I also tried installing only the Original software that came with the Mac & the 3210. Now that doesn't work either.
But I'm Still Hopeful,
Scott Smith
P.S. I am using a Powerbook G4....
*I have complete instructions on this process if you think it might help your situation.... (it removes all hp stuff & built-in Mac/HP driver stuff.)

Hp officejet 6510 all in one fax problem

i have installed Hp officejet 5610 all in one to windows 7 64 bit , but fax is not working.
Drivers is been downloaded from hp website.
Kindly provide the solution to use the fax .
Printing & scanning is working fine.
I kindly await your answer

HI,
Disconnect all cables and connect directly to a different wall outlet and try again.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP 2610 All in One Utilities Problem

Hi, I've got a problem with my HP 2610 All in One Printer. I'm trying to clean the cartridges/check the ink levels etc, and normally I would have done this by choosing the printer from the System Preferences printer section, but when I click the Utilities icon, an error message says that the printer was not turned on or connected.
I've uninstalled the software, reinstalled the basic printer driver, but the problem still persists. It won't show me any ink levels, allow me to clean, align etc because of the fact the Mac thinks the printer is turned off, despite the fact that I can print to it.
Any ideas? Thanks in advance!

I also tried plugging the USB cable into the actual computer rather than the keyboard, but it had the same effect.

HP PSC 1600 All-in-one installing problem

I just purchased the above all in one from the apple store. I followed all the instructions but when I try to install the printer software by clicking the icon I keep getting the standard:
'There are no devices connected or he device which you have connected is not supported by this installer. Please connect the proper device and run the installer'
The accompanying trouble shooting booklet, mentions this problem and says to make sure the USB cable is plugged in the computer before instaling the software. I have done this but to no avail.
Any idea what I could be doing wrong?

Yes I just installed it and before that the other download on the HP website. They still wont work. The apple store suggest I bring it the all in one printer to the store and my Imac, however I have to book an appointment for them to sort it out, maybe a week. I want to have actioned asap cos I have a lot of work to do on it!

HP PSC 1510 All in One Feeding Problem

I own a HP PSC 1510 All in One and have had very few problems with it up until now. The computer that it is mainly plugged into runs on Windows XP. Once the printer is turned on it immediately takes in a sheet of paper however only half way then a message appears on the computer screen saying that there is a paper jam. If you press the "Cancel/Resume" button on the printer the paper feeds all of the way through however it immediately takes in another sheet but again only half way. Because of this you cant print at all.
Hope you can help!!!

Hi - Try following the steps in this document. It should help resolve the problem.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

1350xi All-In-One Printing problem

I've had a 1350xi All-in-One printer for a long time, and just recently it began printing the test page (for aligning a new cartridge) every time it is turned on. It doesn't seem to matter if it is connected to a computer or not. How can I change this?

scan the alignment sheet immediately after it prints, and that should complete the alignment process. then, the print will stop printing it until you replace the cartridge again.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Hp 3310 all in one faxing problem

I recently changed my phone service with at&t to their u-verse. In doing so, I now realize that I am now unable to fax with my 3310 all in one, and it seems it is because it is an analog and u-verse is digital. Is there any type analog to digital in line converter available to help with this problem.
Thanks in advance for your help.

ronlin1154
Welcome to the HP Community Forum.
I do not know if the following will be helpful or not. The document is somewhat vintage in design; it addresses DSL lines, for example, and may not be directly applicable to today's U-verse.
Nonetheless, the issue is the similar and the information may be useful in context.
Using an HP All-in-One or Fax Product on a PBX, ISDN, or DSL Phone System
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

HP8600 Officejet all in one -scanning problem with ADF

Hi there - I have an Officejet 8600 all in one printer-scanner etc. I love it - it copies no problem - it used to scan both from the Automatic Document Feeder and from the glass.
NOW - it prints OK - it scans from the flatbed glass OK - but when you scan a document in from the document feeder - it scans 4 pages 1inch high then the document. This is really irritating as it never used to do this and I dont want to have to scan pages one at a time from the glass.
Thanks for your help!
Stella

Hi @Stella33, and welcome to the HP Forums! I would be happy to help you with your 8600.
Based on your description, it sounds like the issue is limited to the document feeder. Although the document does pick up paper, the following document will guide you through helpful troubleshooting steps to potentially solve the issue you are experiencing; The Automatic Document Feeder (ADF) Does Not Pick Up Paper.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

MOVED: NVIDIA GE FORCE 540M ON MSI ALL IN ONE AE32 PROBLEM

This topic has been moved to MSI All-In-One and barebones PC series.
https://forum-en.msi.com/index.php?topic=159691.0

Hi there, welcome to forum.
"*Update*
I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
Here is my PSU:
http://www.xpcgear.com/500wseepsubl.html
I do not know much about PSU's, so any input is greatly appreciated. Thanks."
your PSU is good one and should be powerfull enough.
Output +3.3V@28A, +5V@30A, +12V@34A, [email protected], [email protected], +5VSB@2A
can't be power related, since at 1st your PSU must be enough, 2nd same issue happend with your old mx 440 VGA. card malfunction are dismissed as possibility as well since its work fine in another machine.
think its drivers mess. ATI drivers(or part of them) still exist, guess is not completely removed. same symptoms happend many times when switching between Ati to NV, lagging 2D scrolling lag and etc, caused by ATI Smart (part of ATI Drivers) sometimes remain(survive after driver cleaner).
suggest you a new clean fresh OS installation. like Nv support already directed. also ensure in BIOS, in "Integrated Peripherals", "Init Display First" are configured to AGP.
let we know how its going, if problem persist we a ready with a tips to resolve your issue.

Deskjet 3050 A e all in one printer problems printing from ipad

my ipad is connected wirelessly through the WPS set up to a ZyXEL router.
can't connect desk jet 3050 Ae all in one printer to the wireless network. Ipad can't find printer and print
Can you help and give detailed instruction how to set up?

In order to set the wireless connection, you should use the Software from your PC.
You will be prompted to temporary connect a USB in order to configure the printer.
If the sofware is not yet installed on your PC, follow the instructions below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en&product=5061082&tmp...
If you already completed the software installation, you may find the wireless configuration as following:
1. From the computer’s start menu select All Programs or Programs, and then select HP. 2. Select HP Deskjet 3050A J611 series 3. Select Printer Setup and Software Selection 4. Select eighter Convert a USB connected printer to wireless or Connect a new printer and Follow the onscreen instructions.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

HP 6100 officejet all in one / fax problems

Ok, I have gone through the set up. However, I never see a fax icon on the Director, and when I try to bring up the fax settings, all I get is an error message. I am so frustrated. I am trying to send a test fax to Kinko's, and I keep being told it doesn't answer. Obviously I'm doing someting wrong. I'm a 72 year old women with no 8 year old boy around to assist me. Help! someone please come to my rescue. Thanks.
This question was solved.
View Solution.

You won't see a fax icon in the Director. There is no fax program at all that comes with the fax in the All-in-one (at least I've never seen one) that was for the future. The only thing that it handles is your name and telephone number done when you first install or by the menu. It can't save send faxes either. It can do nothing but print out an incomming fax.
You would have to get a real fax machine or a program such as "Mighty Fax" which you can use to send and receive faxes, and it will save your sent faxes and recived faxes. It will convert images to fax, and all input is user friendly without needing printer cardridges to operate. The All-in-one has never incorporated all fax capaibilites into the 6100 series.

HP C309a All in one Printer - Problems with printing documents the correct size.

Hi I recently purchased an HP 309a as a replacement for an EPSON printer which had to be replaced a couple of times so I thought I would change manufacturer.
The HP printer prints well in post places but when I print from Excel on an A4 scale it only prints 3/4 size on an A4 page. I tried everything to get it to print the correct size. I have adjusted the settings to scale to A4, print boderless etc and it just will not print correctly.
It seems to be ok in Word and many other programs so I don't know why there is an issue with Excel. Iam I missing something, please help.
Also is there any way to default the printer to A4 automatically instead of 8" x 11".

I also have issues using this printer with Excel/ Word.
When I am using Excel or Word I have to remove the HP 309a as my default printer.
when set as default, excel and word just "hang" for up to 3 minutes when opening or saving.
I called HP who said the printer works with all other files so basically it's tough. One of their tech guys tried to sort it out but couldn't.
Has anyone else had this same problem? If so, how was it resolved?
£300 for a printer that doesn't work with MS. It's not funny and I won't buy HP product again.

Hp2640 all in one copying problem

Similar Messages

Maybe you are looking for