HT1222 On my iPad mini, I did automatic update for iOS 6.1.3. It downloaded it but did not install. Install update is not highlighted and there is a message that a connection is required when its already connected to Internet. What can I do to install

I click the auto update on general settings of my iPad mini for ios6.1.3. It was downloaded but not installed. Install was not highlighted with message Internet connection is required. The mini is connected to Internet. How can I install it

Hey Beata G,
Welcome to the Apple Support Communities. If you are unable to install the software update, you may need to plug the iPad Mini into a power source. If it is below a certain percentage in power it will require power to ensure that iPad Mini does not loose power when installing. If you still have issues the following article will walk you through that process and also if you want to update the iPad Mini through iTunes.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Regards,
-Norm G.

Similar Messages

My iPod tocuh 5th Gen still disabled when i already restored it twice, what can I do?

My iPod tocuh 5th Gen still disabled when i already restored it twice, what can I do?

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When opening a pdf link the process stalls and there is a message that Adobe acrobat reader is running. to the best of my knowledge I do not have the reader. I have an older version of Acrobat Pro. How can I fix this?

when opening a pdf link on a web poage the process stalls and there is a message that Adobe acrobat reader is running. To the best of my knowledge I do not have the Acrobat reader. To the best of my knowledge I have deleted the reader program. I have an older version of Acrobat Pro. The problem occurred before I did the deletion and continues since then.

Assuming that you are using IE10 / IE11 on Windows: http://support.microsoft.com/kb/2716529

I just bought something via my debit card but since i set my payment menthod to none and now i cant set my payment information back ...Its declined my card how i can solve this problem thankyou

I just bought something via my debit card but since i set my payment menthod to none and now i cant set my payment information back ...Its declined my card how i can solve this problem thankyou

I think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.

IPad mini stuck at reboot screen for ios 8.1.2 update

My moms iPad mini is updating to ios 8.1.2 and it is currently stuck at this point
(___________________ ) <- Small space. It has been sitting there for like an hour and a half. What do I do? :/ I just wanna play some VainGlory

Reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

My ipod has an error that makes a blue line when i get in an app what can i do ?

hi every single time i get in an app there apears a big blue line moving to every corner i dont know what can i do please help

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, and it does not connect to other networks, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IM USING AN IBOOK G4 OKAY WHEN GO TO FLASH PLAYER ITS SAYS THE INSTALLATION FAILED WHAT CAN I DO TO INSTALL THIS FLASH PLAYER ON MY IBOOK G4 OR A DISK

WHAT CAN I DO PLZ
DO I NEED A FRESH INSTALL OR WHAT OR ILFIE THATS WHAT NEED RITE.

For the patch see a newer download link within the web page at:
http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc
For a way to check the version installed & test it see:
•Flash Player Help - Adobe Flash Player:
http://helpx.adobe.com/flash-player.html
There are instructions on how to use the patch, since it is not a
full installer of the Adobe product, in the download file read-only.
Hopefully it'll work.
That depends on what OS X your iBook has.

When setting up my Time Capsule I get an error message that another device is using my computer's IP address. What can I do about this?

When I am setting up my new Time Capsule I get a pop up window that says another device is using my IP address and I have to change it. My time capsule will not work or connect to the Internet. I assume that is why. Everything is plugged in as should be. I also have a wireless DVD player and my DISH network plugged in to the Ethernet of the Time Capsule.

You need to do the setup of the TC before you plug it into the network.. you obviously already have a router, so set the TC up as bridge device.. in airport utility/internet tab/connection sharing.. off bridge mode.. then you can plug it into the network and whatever is main router will do its job properly.
If this is not the case, then you have a static IP setup somewhere.. or another dhcp server.. track down and remove it.

I get an error message that reads "error parsing request" when loading travelocity pages. any ideas what causes this??

since upgrading to 4.0.1 the travelocity website has given the error message... error parsing request ...and can proceed no further. have reinstalled 4.0.1 and travelocity bookmark with no success.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

My new iPad air is suddenly asking for a pass code. I have only just finished restoring it from my iPad 2 and I didn't set one. The one I used before doesn't work. What can I do?

My new iPad air is asking for a pass code. I have only just finished restoring it via iTunes from my ipad2 and I didn't set one. The one I used before doesn't work. What can I do?

http://support.apple.com/kb/HT1212

TS2755 I'm trying to activate iMessage on my iPad 2 - I keep receiving an error message saying I need to check my connection even though I am already connected through wi-fi and the connection is strong. Please advise.

I'm trying to activate iMessage on my iPad 2 - I keep receiving an error message saying I need to check my connection even though I am already connected through wi-fi and the connection is strong. Please advise.

Possibly there's a firewall in the router. For reasons that I do not understand, that will affect IOS (iPod/iPad) communication but will not affect computers or other devices.
You will need administrative access to the router. If a firewall is present, turn it off and test the iPod again. If it works, turn the firewall back on but weaken it a notch and test the iPod again. Repeat as required.

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Refresh DSV - why does it keep indicating it "Added" things, when its already been done? (repost from DW forum)

Note to moderator(s):
Please remove the other post
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/d4e30da8-5234-4373-963f-c165b99f8df2/bids-2008-refresh-dsv-why-does-it-keep-indicating-it-added-things-when-its-already-been-done?forum=sqldatawarehousing
There were a number of changes done and earlier I had used the "refresh" button in the DSV view, and the updates were reflected in the DSV. Now, however everything should be updates, yet when I hit refresh, the dialog still comes up and list
all the changes it did earlier as "Added". What is going on here?
Now however, all my tables, dimensions, relations etc are setup with no errors and the cube builds, processes and deploys without any errors, yet if I refresh the DSV, I still get the dialog that displays all the things that it "sees" as "Added".
This is even after closing down BIDS and re-opening.
Also, I wonder if this has something to do this this thread, since its concerning the DSV getting "confused"
https://social.msdn.microsoft.com/forums/sqlserver/en-US/33918238-cbe0-4017-bec9-0fe1bad15909/refresh-dsv-gives-net-error-column-argument-cannot-be-null

Hi Shiftbit,
According to your description, you need to know why the dialog still comes up and list all the changes it did earlier as "Added" when there is nothing changed in the data source view, right?
I have tested it on my local environment. We use the sample project AdventureWorks, we didn't make any modification on the DSV and click the Refresh button, and all the changes were list on Refresh Data Source View dialog. So as per my understanding, this
is default settings. If we click the button, it will list all the changes from the date when you create this project.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback Your feedback enables Microsoft to make software and services the best that they can be.
Regards,
Charlie Liao
TechNet Community Support

HT6162 My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

HT1222 On my iPad mini, I did automatic update for iOS 6.1.3. It downloaded it but did not install. Install update is not highlighted and there is a message that a connection is required when its already connected to Internet. What can I do to install

Similar Messages

Maybe you are looking for