HT1320 Ipod Touch 3rd Gen Error

My ipod touch 3rd gen has an "activation required" error and the slider won`t work, what should I do?

For what it is worth I have excellent success with WEP encryption as follows:
For 40/64 Bit Encryption use a 10 digit manual hex key
For 104/128 Bit Encryption use a 30 digit manual hex key
Don't use the key generator function in your router. Simply put a manual entry into Key Field 1. Set Authentication Type to Automatic. If you have computer devices make sure to uncheck the section in networking that states "key is automatically provided for me" and put it in manually.
This procesure bas been bulletproof for me, and a 30 character hex key on 128 Bit WEP is plenty secure.

Similar Messages

  • I downloaded a recommended update and since then my ipod touch (3rd gen) is frozen and wont turn on (1604 error)

    I downloaded a recommended update and since then my ipod touch (3rd gen) is frozen and will not turn on. I try restoring factory settings but the process terminates with a 1604 error. I have researched this problem on the net and think i have tried everything, but still no joy. I have tried removing all apple and itunes software and reinstalling, updating the apple drivers - nothing has worked. I am using itunes 10.3 on my pc, windows xp.
    If anyone can help me i would be extremely grateful - I am off on holiday on thursday and would love to have my ipod with me!
    Many thanks in advance.
    Craig.

    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Above is from:
    http://support.apple.com/kb/TS3694

  • TS3694 What is the  "An unknown error occurred (-42110)". The message pops up then I start running iTunes. I have two devices connected to iTunes. 1) iPod touch 3rd gen 2) Apple TV. Help me please!

    I do not know what the error is. I have googled it but I can not find anything. Help me please!
    "An unknown error occurred (-42110)". The message pops up then I start running iTunes. I have two devices connected to iTunes. 1) iPod touch 3rd gen 2) Apple TV. Help me please please!

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

  • Will Apple cover me if updating to iOS5 on ipod Touch 3rd gen ruins/bricks it?

    I have heard stories of some people's apple products not working/bricked after attempting to upgrade to iOS5.
    I have a 1.5 year old ipod Touch 3rd gen. No warranty on it from Apple (tho I do have one from Square Trade for ADH, but I called them and they said if it is a software issue, they don't cover it.)
    I am very concerned about d/ling the ios5 upgrade and it ruining my ipod touch.  In effect, I will take a device that could fetch almost $200 on ebay (which I could then use to upgrade to a Touch 5gen), and turn it into a worthless piece of junk if I upgrade and it ruins it.
    Also, I know that they have released 5.0.1 (beta I believe?) for update.   I still read stories on here from people waiting until now (Nov, a month after it was first released when so many people tried to d/l it and had terrible problems), but now are still getting network timed out error msgs, etc.
    So is there ANY protection from Apple if their update should screw my ipod touch??
    Should I just wait longer for a final, stable version  of ios 5? (like v5.1)  Or just totally skip the iOS 5 upgrade and stay safe with iOS 4?  I don't know that it is really worth the $200 loss risk to upgrade to iOS5.  (i.e. 3rd gen doesn't have the ability to find and lock/wipe my lost touch, etc.)
    I do know that I should:
    1) install itunes 10.5 anew on my laptop  (itunes and syncing WAS done on my tower, until I just got it back from being serviced for some Major problems/virues/malware/etc.  I'm not comfortable using it, as the problems on it included not being able to start Local Services, connect to the internet, no audio services, etc.  The guy says it is booting up and services are working now, but you never know....But i digress...)
    2) be on AC and not battery on my laptop
    3) be hardwired (ethernet) to the internet and not use my wireless connection
    4) turn off Windows 7 Firewall, and disable my PC Tools Spyware Docter with Antivirus.
    So, what do you all think? should I wait until later to upgrade to say os 5.1?  Should I even RISK upgrading to iOS5 on a touch 3gen and lose almost $200 cash?  And will Apple give me ANY protection should it ruin my touch?  (I seriously doubt it.)
    Thanks for input.
    Dave
    Kentucky

    Before proceeding with the update, it wouldn't hurt to manually back up the iPod in iTunes by right->clicking on it from under the Devices section and choosing Backup.    See this article for more information on what is stored in the backup.
    http://support.apple.com/kb/HT4946
    Also make sure that any content you may have synced to the device from iTunes, such as Music, movies, TV Shows, podcasts, etc. are all stored on your computer and in iTunes before updating the iPod's version of iOS.
    Otherwise, I would go ahead with the upgrade.  I didn't have any issues with it on my iPhone.
    B-rock

  • IPod Touch 3rd gen reboots: panic CRC ERR

    My 14 year old daughter had an iPod Touch 3rd gen that, with less than a month to go on the warranty, the touchscreen stopped working.  Took it in to the Apple store, where they tried to see if they could resuscitate it by upgrading iOS, reseting to factory defaults, and a couple other magic clicks they tried.  All to no avail.  They checked the liquid damage indicator, found no damage, and then agreed to replace the device.  I walked out with a new (?) device and was happy.
    A couple months later I overheard my daughter asking if she could have her mom's Touch.  I asked why she wasn't using her Touch, and she told me that it has rebooted randomly since we got the replacement.  Of course, I was incensed that she didn't say something sooner - like, before the warranty ran out. Knowing that the warrany had expired, I started to research the problem on Apple's forums and the Internet.
    Most of the information I found seemed to indicate that certain versions of iOS seemed to incite these kinds of problems. So I went through several exercises to try upgrading, downgrading, restoring the device, DFU mode, etc.  Still, the problems continued.  I upgraded the device over the weeks and months, hoping to find the magic version that would stop this.  I tried removing apps, not installing any apps at all, putting music on slowly instead of syncing large amounts of data, etc.
    A day or two ago I installed iOS 5.  It seemed like it was going to work fine, but still periodically it would crash - including during the upgrade process itself, during the restore after the upgrade, when running large apps, when running small apps, and even when not doing anything at all.  In fact the reboots complicated the process such that I could no longer sync without an error, so I had to reinstall the OS again earlier today. I was at dinner tonight and looked over when something caught the corner of my eye - it had gone to the Apple boot screen all by itself, when it was simply sitting there not being used.
    I found General -> About -> Diagnostics & Usage -> Diagnostic & Usage Data, and see eight files:
    (4) files called 2011-10-15-xxxxxx.panic.plist (I assume xxxxxx is a time of day, since the latest one is from dinnertime)
    (4) files called ResetCounter-2011-10-15-xxx (rest of file name is cut off, xxx is first three digits of above xxxxxx)
    I opened them and they all look relatively similar (latest one shown):
    panic.plist:
    Incident Identifier: 5498CD62-1915-4CF6-AA29-68B264862600
    CrashReporter Key:
    1f8e6350d76b74f0edef75a88dbf683f7cf32490
    Hardware Model: iPod3,1
    Date/Time: 2011-10-15 20:42:29.359 -0400
    OS Version: iPhone OS 5.0 (9A334)
    CRC ERR!
    ResetCounter:
    Incident Identifier: 246DB43B-7BC1-454D-8835-FBB81C4DD63B
    CrashReporter Key:
    1f8e6350d76b74f0edef75a88dbf683f7cf32490
    Reset count: 1
    Boot failure count: 0
    Boot faults:
    Boot stage: 0
    Boot app: 0
    Now I'm no Apple genius, but CRC ERR to me means a memory problem (cyclic redundancy check, stored checksum of memory contents does not match calculated checksum of same).  The fact that there is a file for each crash since I reinstalled iOS indicates to me that this device is panicking because of a memory problem.
    I am generally happy with the Apple i* line - our family has an iPad, an iPad 2, an iPhone 3GS, an iPhone 4, 3 iPod 3rd Gens, and our daughter is on track to get an iPhone 4 for her birthday next month. What concerns me is that they have given me a refurbished device with a problem, and I am powerless to do anything about it?  The flat rate repair cost for the device is $149, but I feel that they gave me a device that wasn't working to begin with.
    Any advice on how to deal with Apple in a case like this?  The device is, of course, not covered by warranty, and they want an unspecified amount of money for a single telephone incident, wherein I believe they will simply tell me/confirm that I have a hardware issue. I would like them to look in their records and see what the problem was with the original device they refurbished, because I suspect that they didn't find fault and simply repackaged it.
    I am prepared to talk to them - I think I will go to the store, though, because there are scant few appointments available for someone to call me in the next week.  I am even prepared to pay the money, if I thought I had a decent chance of getting some satisfaction in this.  But after reading some other customers' experiences with AppleCare, I tend to believe that the tier-1 support people won't satisfy.
    The device was easily $250 when I first bought it for her, and I feel somewhat cheated if they simply repackaged dead hardware.  But it's my word against theirs at this point.
    Again, simply looking for advice on how I might bring this to the attention of people who care and aren't just reading from a troubleshooting flowchart.
    Thanks in advance for any advice or suggestions, including if anyone knows of a resolution that I haven't tried?

    My problem is exactly the same, and I have not found a solution. I have a 3rd generation iPod Touch with 32 GB, recently upgraded to iOS 5. My iPod reboots randomly, regardless of what it's being used for, and sometimes even when it's not being used. My "crash reports" in Settings -> General -> About -> Diagnostics & Usage -> Diagnostic & Usage Data directory are very similar:
    panic.plist:
    SysInfoCrashReporterKey
    e0ab646b87a44daa85ab165a087e2c90b04c1cae
    bug_type
    110
    description
    Incident Identifier: 915E60F0-790A-4ABE-B153-F371E6B497F0
    CrashReporter Key: e0ab646b87a44daa85ab165a087e2c90b04c1cae
    Hardware Model: iPod3,1
    Date/Time: 2011-10-30 00:42:12.906 -0400
    OS Version: iPhone OS 5.0 (9A334)
    CRC ERR!
    os_version
    iPhone OS 5.0 (9A334)
    system_ID
    ResetCounter:
    AutoSubmitted
    SysInfoCrashReporterKey
    e0ab646b87a44daa85ab165a087e2c90b04c1cae
    bug_type
    115
    description
    Incident Identifier: B95D297B-EF08-4C6E-A411-CCBAB2515A5A
    CrashReporter Key: e0ab646b87a44daa85ab165a087e2c90b04c1cae
    Date: 2011-10-30 00:42:10 -0400
    Reset count: 1
    Boot failure count: 0
    Boot faults:
    Boot stage: 0
    Boot app: 0
    displayName
    Reset count
    name
    Reset count
    os_version
    iPhone OS 5.0 (9A334)
    version
    101
    Any suggestions would be appreciated.

  • HELP. Ipod Touch 3rd gen won't switch on after updating to OS 4

    So here's the thing. I tried to download and install the new OS 4 (i think i had iOS 3.1 before) to my Ipod Touch 3rd gen. Since it was taking a bit too long, i left it hooked up to the laptop for an hour to do some errands. When I got back, the laptop was on standby mode. I checked Itunes and it had this prompt saying update failed or an error occurred (#1602 I think but I don't know what it meant that time). I then checked my Ipod Touch and it was switched off. So we figured maybe the battery got drained while we were gone and tried to plug it via AC charge for 10 minutes. Nothing happened. I tried to hook it up to the laptop, no luck there either. The charger worked fine for an Ipod video we also have. I'm scouring the webs for what to do, Im getting worried. hope someone can help me in this. Thank you.
    (and additional question. I'm here in the Philippines right now but this Ipod Touch was my sister's, I think she bought this last year in the US. She just sent it to me this month. So if I take this to the local Apple store, can they do something about my problem? Assuming I cant fix anything by tomorrow. Thanks again folks.)

    First I would charge it for an hour and then:
    - Have you tried resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears
    - Next would be to place the ipod n recovery mode and then try to restore it via iTunes. For recovery mode see:
    http://support.apple.com/kb/HT1808

  • My iPod touch 3rd gen is stuck on apple logo

    My iPod touch 3rd gen is stuck on the white apple logo. It will not manually restart/restore if I hold the power and menu button. It does auto restart about every 15 minutes on its own. If I plug it into my computer, both my computer and iTunes will recognize it and lets me edit its contents, fully syncs without a problem, etc. However, if I try to Update/Restore Ipod iTunes will completely freeze until my iPod autorestarts at which point it will become "unfrozen" and say there was an error communicating with my iPod. I have tried using 2 different computers with the latest version of iTunes. PLEASE HELP!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • IPod Touch 3rd Gen Won't Restore

    I have an ipod touch 3rd gen that I can't get to restore. The ipod won't turn on unless it's plugged in and goes straight to the apple logo, so I put it into recovery mode and try to do a restore. It extracts the software but as soon as it says preparing ipod for restore the ipods screen turns white for a brief second and it restarts itself back to the connect to itunes logo then loops the same process until itunes comes up with an error saying The iPod "iPod" could not be restored. An unknown error occurred (1611). I've tried several different computers and have also tried replacing the battery but still no luck. Does anybody have any other suggestions I can try?

    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
    Above from:
    http://support.apple.com/kb/TS3694
    Based on the troubleshooting you already performed, you may have a hardware problem.

  • HT4972 ipod touch 3rd gen update issues

    I have an ipod touch 3rd gen and i can not get it to update. when i try it goes through the motions of downloading the update and then after a little while it says error that it can not be updated... any thoughts on what to do?

    Which version of iOS do you currently have on your iPod? I know the sign off for your discussion says iOS 4.3.3, but I don't know if you entered that information or it was automatically generated.
    What capacity is your iPod - how many GB?

  • HT3576 Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click  check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?

    Ok so i have this iPod touch (3rd gen) and i'm trying to update it through iTunes and when i click  check for update it keeps saying this version of iPod software (2.2.1) is your current version. what do i do? how do i update it?

    You have a 1st generation iPod Touch. It can not be upgraded beyond iOS 3.1.3, it is available at the link below.
    http://support.apple.com/kb/HT2052

  • My iPod Touch 3rd Gen, Does not show up on iTunes Devises  4.3

    My iPod Touch, 3rd gen, does not show up on iTunes 10. I feel I have exhausted al avenues. Diagnotics passed all tests but - The Connection Not Found. Continued on with there Help suggestions with no success.

    Which version of iTunes are you using?
    Stedman

  • HT1454 Can not get video out from my ipod touch 3rd gen. Any ideas? It should nt be diffiicult to do this on the 21 st century, or not?

    After having spent EUR 130 on cables from apple, i still can not get video out from my ipod touch 3rd gen. Any ideas? It should nt be diffiicult to do this on the 21 st century, or not?

    Backing up an iOS device will copy some data to a backup file within iTunes, but this excludes all media.  You can also transfer iTunes Store purchases from the iDevice to iTunes but, without using a third-party tool, nothing else.  As long as you do not sync the iPod with your new library, the media that's on it will remain ... for as long as it keeps functioning, is not lost, stolen, eaten by the dog, ...
    You may also have an option to recover your previous library from your old laptop; as long as its hard drive isn't fried, a computer repair store or technician may be able to extract the drive, mount it in an external enclosure, and copy your data to another PC.  Whatever you choose, there is no real alternative to having all your media on your computer, managed by iTunes, and regularly backed up to another device/location.

  • Can anyone recommend some good apps for ipod touch 3rd gen can't find any its for my niece thanks

    hi i recenty got an ipod touch 3rd gen,
    its second hand but after a master reset and recover its working fine, ive updated it but dont seem to be able to find any apps too work on it. i got if fot my niece and would like to down load a few things for her before passing it over, any help would be great

    You appear to be stuck on iOS 4.2.1. That means up really have a 2G iPod. A real 3G can go to 5.1.1
    .To find compatible apps more app for 4.2.1 see:
    Old Apps
    VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
    apps for ios 4.2.1: Apple Support Communities
    Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
    HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
    apps for 4.2.1 (also works for 3.1.3)
    Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
    4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities

  • Ipod Touch 3rd gen not chargin anywhere else that it isn't my macbook pro and only works on one of the USB ports the other one doesnt recognize it... I use the same USB cord to charge it on the wall for some time now it wont even charge on the wall

    i have an ipod touch 3rd gen this is my second ipod touch my fist one the battery died after 4 years so then a bought this one (ipod touch 3gen) and it works perfectlybut for some time know it wont charge anywhere else thats not my macbook pro and the thing is the only charges and its recognized only on one of the USB porst of the laptop i have a windows 7 computer but it wont charge there have a linux (ubuntu) machine and doesnt work either, the wall charger with the same cable i use on the laptop and wont charge either i plug it on my sisters car and wont charge my char wont charge anyways i wont charge anywhere else thats not my macbook pro only with 1 of the 2 USB pork that the MBP has..... any help? can someone ewlp me? i really doubt its the battery cause it charges fine on my MBP :/.... oh now i recently upgrade to OSX Lioin but the problem perssist I did the recent update but the problem persists :/

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • My iPod touch 3rd gen is malfunctioning

    Well first, my iPod touch 3rd gen would start turning off (not all the way, just so that you have to turn on the screen and swipe the lock screen) without me doing anything. It stopped that quickly though. Then the volume sign would start appearing on the screen without me ever touching the volume switch. And then whenever I tried turning it off, (just the screen again) it wouldn't turn off, and I'd just have to wait until it automatically went off. These weren't horribly big problems, but I wanted to get rid of them of course, so I turned my iPod off all the way, with holding the power button down. Now I can't turn it back on at all and I don't know what to do. I'd really appreciate help, I'm not super good with this stuff, 'specially this. thanks! <3

    Try this for the freezing
    http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
    Or if they don't work put it into recovery mode
    See here
    http://www.apple.com/support/ipodtouch/assistant/restore/
    Then restore
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • NullPointer when invoke InitialContext  in standard application sip server

    I am unable to do a new InitialContext() in an application that does not have any sipservlets , but is deployed on sip server engine tier When an application is deployed in weblogic engine server (sip server 3.1 ) without a sip.xml as the application

  • SAP to 3rd party: EDI and XI: Needed advantages and disadvantages

    HI All, I have a requirement to sent PO data from SAP to 3rd party Vendors.(more than 30 vendors). Client insists on using EDI.!! I have completed the config on SAP R/3 side and IDOCS are created in SAP R/3. Since we have XI in the landscape, I have

  • Help on installing BIEE 11g on Linux(Ubuntu 32bits)

    Hello guys, Im trying for 3 days and i get the same error on pre-requisites looks like this -> http://www.artofbi.com/index.php/2010/11/obiee-11g-pre-requisites-kernel-failure/ but on 4 itens: glibc, kernel, physical memory, checking recomended os i

  • STOP not allowed

    Hi, Obsolete Statement 4.7 version and Ecc 6.0 Version, STOP not allowed The statement STOP is not allowed in ABAP Objects. Error message in ABAP Objects in the following case: STOP. Reason: The statement STOP is intended for the events INITIALIZATIO

  • ECC 6.0, BI & EP on single server

    Dear all, Y'day I recommended my management to take EP, ECC & BI on different servers.... but they are asking me the reason other than performance for different server.... Please suggest me the points that you think I should use in my brief.... Pleas