HT1338 cinema Display 30" no longer recognized by my mac pro? What can I do? It worked fine until now.

Cinema display 30" no longer recognized by my mac pro. Until now it worked without problems, then after a crash it fails to recognize the display.
Now it runs in a far lower resolution. What can I do?
I tried to get da driver for it, but could not find any.

Try the other DVI port on the graphics card. On early Mac Pros, only one port is the dual-link DVI needed for full resolution on the 30" display. Make sure the display's USB cable is plugged into the computer.

Similar Messages

Display Profile No Longer recognized in Final Cut Pro After Mavericks Upgrade

I have a 27" 3.4 GHz I7 imac. and an Apple 30" Cinema Display After the Mavericks upgrade my viewer window suddenly has completely crushed blacks and is extremely dark. Projects previously exported out look perfect in both Quicktime and Preview. I can export a project and it looks fine, just terrible in FCP. It seems that it is related to my calibrated display profiles. FCP will not recognize them now under Mavericks and worked fine with Lion. Switching to the generic imac or cinema display profile will hold after the change and make the viewer look normal. I downloaded FCP 10.1 didn't fix it. Any ideas why this is happening now?

After researching this quite a bit and seeing this Very very dark video in FCP X viewer. I was able to fix the problem by building a matrix based profile. This problem dated back to the first FCP release for some, but I never experienced it until updating to Mavericks. It seems that Mavericks is the problem, since nothing changed with FCP. I read somewhere else that another color calibration software tool was having an issue that Maverick's broke LUT (Look Up Table's} I'm surprised that I am not seeing more photographer's/videographers with this issue. It may just be that those that are using calibration don't have softaware that builds LUT profiles by default.

30" LCD Cinema display - sporadically blanks out, need to restart Mac Pro

2007 vintage 30" LCD Cinema HD display running off a Mac Pro with an ATI Radeon X1900 XT. Was Mac OS 10.5.latest, just upgraded to 10.6.4 with no effect on the problem.
This has happened perhaps 8 or 10 times over the last few months, and IIRC always when I'm playing WoW. I know WoW heats up my Pro more than anything else because I can hear the cooling fans speeding up when I load and play it.
The symptom is the screen goes totally black. The little white light down the bottom-right of the display comes on. If I push the power button on the display the white light goes bright, but there's no other reaction. The capslock light on the keyboard still reacts so I know I don't have a total system hang.
I shut down the whole Mac Pro by holding in its On button for 10 seconds, and it powers down as normal. But the white light on the display is still on, and I have to disconnect the power from the display so the white light goes off; only then I turn the Pro back on and all is well again.
The screen always gets very warm to the touch - I can hold my hand on it OK so it's not burning hot but it still seems too hot to me. Is this normal for this screen? It seems a little odd there are no cooling vents if so. Having just restarted iStat Pro says Mac HD (I think that's the display) is 46c, CPUs and everything else 40c or below. It is coming on for summer here but today is not hot, iStat says ambient is 23c.
So what am I asking for? I guess some sort of validation of my issue, advice, and where I should start diagnosis - display, video, display power, the Mac itself ... or should I just get Apple out here? I do have Apple Care.
Thanks all.

And it's happened twice since then, both while playing WoW. After the latest reboot my temps are 49c for display, 45c and 48c for CPUs. The Mac has been on for over 6 hours before I ran up Wow with no problem, in Wow for maybe 5 minutes and there it goes.
The latest Mac updates to iTunes 10.1 and OS 10.6.5 were applied a few hours ago, well before this latest crash.
My best guess is that either some component has gone temperature-intolerant that didn't used to be, or there is something in the latest WoW version that is triggering some hardware, driver or OS problem. I really don't have much of an idea where to go now. Any suggestions?

My 2nd gen Ipod isn't being recognized by my Mac. What can I do?

My Mac doesn't recognize my 2nd gen I pod nano. How do I fix it?

Hello there, klr81.
The following Knowledge Base Article provides some great steps for the issue you're describing:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Apple Cinema Display speakers no longer work after Mavericks update

I have a MacBook Pro 15", purchased in late-2010 connected to a 27" Apple Cinema Display also purchased at the same time. The display connects to the MacBook Pro via USB and mini displayport. The built-in 2.1 speakers on the display were working fine until the upgrade to Mavericks. When I go into the speakers settings, I can change it to internal speakers and the sound comes from the MacBook Pro, but when I choose the cinema display, nothing happens.
Any ideas?
Thanks in advance!

Hi lelandgray,
If you are having audio issues with your Cinema Display after upgrading your MacBook Pro to Mavericks, you may want to make sure that the most recent Cinema Display Firmware Update has been installed. You may find the following article helpful:
LED Cinema Display (27-inch): Intermittent loss of audio
http://support.apple.com/kb/ts3602
Regards,
- Brenden

Thunderbolt Display suddenly no longer recognized by my MBA

I have been using the thunderbolt display with my Mid 2011 Macbook Air (13inch). Everything worked fine. Now suddenly when I plug in the monitor the macbook does not recognize it. In System Information:Thunderbolt it says it is not connected to anything:
MacBook Air:
Vendor Name:          Apple, Inc.
Device Name:          MacBook Air
UID:          0x0001000C12AC2000
Firmware Version:          8.1
Port:
Status:          No devices connected
Link Status:          7
I know there is power to the display, as I have been using the display's cable to charge the MBA (as I've always done).
I don't know how to diagnose the issue further. Nothing else is connected to monitor or computer. Restarted many times. All cables look fine. All software up to date. (not sure about any display firmware...). Clamshell or as additional display.

Try the other DVI port on the graphics card. On early Mac Pros, only one port is the dual-link DVI needed for full resolution on the 30" display. Make sure the display's USB cable is plugged into the computer.

TS1591 my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I-touch no longer recognized by Windows XP Pro

It will still charge up on the computer but the computer doesn't not recognize it in My Computer. Also, when I try to run diagnostics on I-Tunes it tells me the device is not plugged in. I've tried the trouble shooting assistant but that doesn't help me. I've also tried this link, but the computer still doesn't recognize the I-touch. http://support.apple.com/kb/TS1495
Everything worked fine until I let the battery go completely dead. When I plugged it into the computer to charge, I got an error message and the computer never recognized the I-touch again.

Since Apple Mobile Device Services is the piece of software responsible for communicating with your touch, is it operating correctly? Refer to this article to troubleshoot that service: http://support.apple.com/kb/TS1567
If you need to, do not hesitate to uninstall iTunes, Apple Mobile Device Services, and Quicktime. Be sure you reboot your computer before downloading and installing the latest version of iTunes.

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
- I downloaded and installed the Windows Migration Assistant from Apple
- My Mac recognized PC and displays passcode
- The sasscode does not show / display on my PC
- My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
- Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
Any ideas? If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

Are the new displays for MacBooks only - Options for a Mac Pro User?

I am currently running 23 inch displays in our small design studio (4 workstations). I need a new or a second display for my own Mac Pro. I hate the new 24 inch display. I cannot imagine running Final Cut Studio on this glossy screen. So is anyone else out there in this situation? Looking for other choices? I want to stay in the Apple line up if possible but now I am even looking at Dells, as I feel Apple will only continue with the glossy screens.
Are any pro-users in video or photography using the new 24 inch displays? and I mean users who do this for a living. Thanks everyone?

Hello!
Sorry it took a while to notice your post. There are two options for your mac pro to use the new 24 inch cinema display. The ATI Radeon 4870 HD has the mini-display port on it, and the Nvidia GT120 also is an option. Personally, I'd go with the 4870 as its a much better graphics card.
You can find them on the Apple store's site under DISPLAYS/Graphics
Hope this helps.
Now, just to clear something up. If you have a 2008 mac pro, you can run the GT120 if you prefer.

Macbook to TV, Works fine until I put the Macbook to sleep then tv display

Macbook to TV, Works fine until I put the Macbook to sleep,
I wake the Macbook with external keyboard and the display shows up on TV just fine for a second or two then it looks like something changes and then it starts rolling.
It does not do this when Macbook is awake it only does it after it's put to sleep.

Probably the resolution is switching from a mirrored resolution to some other resolution that the TV can't work from. Try this; shut down the MacBook. Cable up the TV to the MB and also the external keyboard and mouse. Hold down the Shift key on the external keyboard, hit the start button on the MacBook and immediately close the lid on the MB after you've hit the start button. Continue holding the Shift key down on the external keyboard until you see the grey screen with the spinning gear at which time you can release the Shift key. The MB should now finish starting up in Safe mode with only the external screen being on. Hopefully the screen will not be rolling.
Once the MB finishes booting, go into System Preferences/Displays and set the resolution to the optimal/desired resolution for your TV. Hopefully this choice will stick through subsequent restarts and also correct the issue of the rolling screen under the conditions in the scenario you described.

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

For that model, Epson has this information:
ICA Scanner Driver
07/17/12
Description: The latest Mac OS X ICA scanner driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
1. Connect the all-in-one or scanner to your Mac and power it on.
2. Select the  menu, then Software Update.
3. Follow the on-screen instructions to install the available updates.
Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
Compatible Systems: Mac OS X (v10.8.x)

I currently have Leopard, and there are no longer updates for it. So I must upgrade to either Snow Leopard or Mountain Lion. Without doing so I cannot update my itunes, and my ipod is no longer compatile with my mac. How can I buy the upgrade

I currently have Leopard, and there are no longer updates for it. So I must upgrade to either Snow Leopard or Mountain Lion. Without doing so I cannot update my itunes, and my ipod is no longer compatile with my mac. How can I buy the upgrade, since I do not have access to the mac store as that comes with Snow Leopard? I went to Best Buy and they said neither Snow Leopard or Mountain Lion can be bought there.

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

Since I upgraded to 10.9.5, my macbook no longer recognizes my external hard drive. How do I fix this? External hard drive is a 1TB Toshiba formatted for mac. Worked fine until latest upgrade.

Since I upgraded to 10.9.5, my macbook no longer recognizes my external hard drive. How do I fix this? External hard drive is a 1TB Toshiba formatted for mac. Worked fine until latest upgrade.

Solved the problem by dumping my external HD onto another computer. Re-formatting and re-installing the data. Not what I wanted to do but it solved the problem.

PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!

PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!

What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933

HT1338 cinema Display 30" no longer recognized by my mac pro? What can I do? It worked fine until now.

Similar Messages

Maybe you are looking for