HT1414 error code 21

my iphone stopped working and is displaying the itunes symbol with connect cable. I have tried restoring it but keep receiving error code 21. Itunes software is up to date on pc. any ideas? or is iphone knackered? it is a 16gb iphone 4

If you have seen and attempted as per the guidelines and not been successful, see the Red text.
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Similar Messages

  • HT1414 Error Code 1114

    I am trying to download the update for iTunes (version 11) and continue to receive Error Code 1114.  Any suggestions?

    someone on here put remove in order - itunes, apple software update, apple mobile device support, bonjour and then apple application support.
    Reboot
    Download itunes.
    worked for me - im trying to find him/her to say thank you as i have been trying all night to fix mine. goodluck

  • HT1414 If I Restore my iPod Touch, will I be able to restore to a backup afterwards (in the process of updating to iOS 5 in the event of error code -43)

    I have just got ready to sync to a new computer (my old one got restored and all backups were lost ) and update to iOS 5.
    I finally manage to recreate my old iTunes library on my new computer and transfer my purchases, sync my iPod an dback it up.
    With all that done, I go on to update to iOS 5... But low and behold I get error code -43 "An error occurred while backing up this iPod-43 Would you like to continue to updte this iPod? Continuing will result in the loss of all contents on this iPod"
    I have seen this solution to the problem on another section of the forum:
    ---dex12
    This solved my questionRe: iOS Update error  -43 
    I restored my phone to original setting. (backed up before I did this)
    It then installed iOS 5 automatically, and then I got the option to set up as a new phone or use last back up...so didn't lose anything.----
    I have backed up my iPod touch, and am ready to restore, but amm worried that if I do restore, I won't be able to restore back to my backup afterwards, this will mean losing some data. I just need confirmation that I will be able to get "the option to set up as a new phone or use last back up," as i really don't want to restore and find myself with an empty iPod.
    If it possible to do this, please coudl someone post a step-by-step guide on how to update using the afformentioned method, just to give me (and many others) peace of mind.

    When you restore an iOS device the IOS version that will be on the iPod after the restore is the latest available for that model device. For the 4G iPod that would be 6.1.6

  • HT1414 my iphone 4 running on IOS 5 will not come out of recovery mode and gives the error code -1. Can any one help me please because i've been without a phone for 2 weeks and still not getting anywhere.

    Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
    This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
    PLEASE PLEASE HELP ME thanks for your time

    This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

  • HT1414 phone is in recovery mode but cannot restore with error code 21,26

    After my latest update on my iPhone 4 my phone started just shutting down and restarting by itself. I have tried to restore the phone with the latest version of iTunes but now get the error message that iTunes has detected a phone in recovery mode. Well that's fine, I selected recovery and when it appears that the recovery mode is going to go through the recovery mode returns an error code.
    The first code I received is the error 1656, then a 26, then the final attempt I got an error code 21.
    This phone has never been dropped, mishandled, or taken any physical damage. It was working great before I attempted to update.
    Please if anyone else has experienced this let me know how you resolved these errors.
    I have attempted every trouble-shooting step indicated on the Apple support site.
    HELP!

    If you have seen and attempted as per the guidelines and not been successful, see the Red text.
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • HT1414 I get an error code 1418 while formatting my ipod. How do i proceed with formatting it?

    Hi
    My ipod nano has been corrupted and I am unable to format it. An error code #1418 appears when i try formatting. Can anyone help me to format the same?

    See the previous discussions on the right side of this page under the heading "More Like This".
    If you still need help, post in the iPod Nano forum. this is the iPod touch forum and iPods touches are not formatted for the computer they are synced with.

  • HT1414 my iphone is frozen and when i am trying to restore the same it is giving error code 21 again and again

    Please help my iphone is frozen and showing only apple sign, after following few tips for web it reached to itunes sign but every time i am trying to restore my iphone it is giving me an error code 21 ???

    If your phone is frozen showing the Apple logo, you need to try to force it into recovery mode to restore it as discussed here:http://support.apple.com/kb/ht1808.  If you're getting error 21, try disabling or troubleshooting your security software (anti-virus, etc.).  This is Apple's discussion on error 21 (copied from http://support.apple.com/kb/TS3694#error21):
    Error 20, 21, 23, 26, 28, 29, 34, 37
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • HT1414 iphone stuck in recovery mode cant restore error cod 2001

    My phone is not able to turn on and when i plug it in on a charger it just says plug into i tunes. When i plug it into i tunes it says its in recovery mode and its going to restore then my phone just restarts and it says unable to restore Error code is 2001 Anybody know whats wrong????

    Hi Matt,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error2001
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Hope this information helps ...
    - Judy

  • HT1414 what does error code (-1) mean when I am trying to restore my factory settings?

    help - My i phone has an icon which says i can have only plug into i tunes - i canbnot do anything else - i cannot turn it on or off and when i try to restore it says error code (-1)  - how can i use my phone?

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

  • Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

    I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport.  I've been using the passport for about a year now without any problems on older Macbooks in my house.  I used to be able to read and write to this drive no problem.  I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive.  When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem.  If I try to delete that folder I just created, I get this error:
    The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
    (Error code -36)
    The folder has nothing in it whatsoever.  I just created it.  But if I go to Terminal and I run
    rm -rf "untitled folder"
    This works fine.  Why is Terminal acting different than Finder?  This does not happen on my other Macbooks.  Thanks in advance.

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

  • Report generation failed----​error code:-1720​5; Access Denied.

    Hi, All
        i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
        detail:
        An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
    Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
    The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility. 
        error code:-17205; Access Denied.
        locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
        How to fix it?
        Thanks a lot.
    BR

    Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
    CTA, CLA, MTFBWY

  • There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

    I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

    Do a clean (re)install
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    From https://support.mozilla.com/en-US/questions/764376

  • My ipod touch is not list as a device on itunes.  When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

    My ipod touch is not listed as a device when connected to my computer.  As suggested I attempted to download the latest of itunes.  I got an
    ox8007054f error code and the down load will not complete.  I have also tried to restore my computer to an earlier setting, but it will
    not accept the change.

    Have you looked at this completed previos discussion. It discusses 0x8007054F.
    Re: Error message when trying to install iTunes

  • Capturing oracle error codes into a variable

    Hi
    Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
    How do I achieve this?

    user633278 wrote:
    How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
    SQL> declare
      2      x number;
      3  begin
      4      x := 1/0;
      5    exception
      6      when others
      7        then
      8          dbms_output.put_line('Error code: ' || SQLCODE);
      9          dbms_output.put_line('Error message: ' || SQLERRM);
    10  end;
    11  /
    Error code: -1476
    Error message: ORA-01476: divisor is equal to zero
    PL/SQL procedure successfully completed.
    SQL> SY.

  • Error Code:942 While Scheduling a report in BI Publisher

    Hi All,
    I am trying to schedule one report in BI Publisher.
    After Clicking Submit Button while scheduling report,i get following error:
    Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
    Kindly Help me in resolving this issue
    Regards
    Amrita Singh

    i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
    I would recommend, you to install the scheduler in another schema or another db.
    Re-installing the scheduler schema tables will fix this.

Maybe you are looking for