HT1725 I am not able to resume the download. My internet connectionis working but itunes is not resuming the download
I am not able to finish a download
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/
Similar Messages
-
Hi , My modem got zapped by lightning yesterday. My iMac still was able to power on when I tried it yesterday. Today the modem is replaced and internet is working, but now the computer will not power on. I followed the steps to reset SMC. Nothing. ??
Ouch, not much more you can do, I think you'll have to have it looked at.
-
My iPad cannot connect to my internet. the internet is working but not with my ipad.
my iPad cannot connect to my internet. the internet is working but not with my ipad.
Call your ISP (Internet Service Provider) and explain them your issue, it could range from having your router configured incorrectly to having a wiring issue. Personally, I have Comcast and they are great, no issues, and awesome customer service.
Hope you get up and running ASAP -
All other internet connections work - but the Mozilla email client can't access the mail... Works in every other café. But not here. Thanks!
I'd suggest you check with the cafe owner which ports are allowed there.
If in doubt simply use webmail, which will most likely work. -
"My ipod is displaying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesn't "see" it even if the computer does."
It worked two days ago fine, for two years, until I installed this newest iTunes update, then for one day it kept on freezing and going to apple logo screen mode, then today it only goes to that screen and wont start up at all.
I've tried the hold down two buttons hard reset, that doesn't help. I've tried disc mode... but iTunes doesn't "see" it even if the computer does.
This is a pristine ipod, never exposed to adverse conditions, never dropped, never wet, and it worked perfectly two days ago.
Can I factory reset it somehow? (considering itunes can't "see" it)
[Ipod classic 160gb less than two years old.]Looks like I might have found the solution on a youtube comment:
R.O:
"Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure. -
Verizon signal is strong but get error message "Ipad is not connected to the Internet" When I try to use Safari.
Wireless works but my Verizon account does notSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.
-
Airport Express: Internet Access Works But Not "Seen" in Admin. Util. ??
Hi All --
I have a friend with the set-up described below and a seemingly impossible problem. he's asked for my help, and so I'm asking for yours, because frankly the situation just has me stumped. Here goes:
Set-Up & Other Relevant Facts
• DSL connection comes out of the phone jack and goes to a Westell model 6100 modem.
• From there, a short Ethernet cable goes to a Linksys 5-Port Workgroup Switch.
• Two Ethernet cables exit the Linksys Switch: one goes to a PC, and one goes to an Airport Express (AX).
• From the AX, a USB cable goes to a printer (a Brother 1440 laser printer).
• The AX is only about 10 feet from his PowerBook G4 15-inch and he gets a full (four-bar) signal on Airport menulet at the top of the screen.
• When he first set-up his system, the G4 and the Airport did set up the Brother printer (using the Airport Setup Assistant), and the Brother is listed as a printer on the G4's printer window or such.
• Both the G4 and the PC access the web fine via this setup (the G4 wirelessly). In System Preferences > Network, the Airport Network is listed, and it says "Airport is connected to the network Apple Network 6c6c1. You are connected to the Internet via Airport."
Problems
• When the Airport Admin Utility is opened, no Airport Express appears at all, even when "rescan" is repeatedly clicked.
How can this be? How can the PowerBook be connecting wirelessly to the Web through the Airport Express, but the Airport Express no be "seen" by the Airport Admin utility?
• In addition, although web surfing is possible for both PowerBook and PC, neither computer is able to successfully print to the Brother 1440. When he tried printing from the PC, he got the following error messages:
[Status for LPT1]
Result=(02)The printer on this port is not responding.
Status Line=BUSY:H,ACK:H,PE:H,SLCT:H,FALT:H,SLIN:L,HBSY:H,INIT:H,STB:H
Later, it seemed that printing from either computer would start and then stall, flashing a variety of different signals about spooling or "printer busy" and the like, all of which appeared to indicate things just weren't working right..
Anyway, the initial questions we're dealing with are the ones in bold above. The printer issues are probably are related and they can be addressed secondarily.
Any and all help with this will be greatly appreciated. Thanks everyone.
-- JDeeThanks for your reply- just to re focus my problem- I
have no issue with getting a wireless network "green
light"
Which is the cable modem correctly giving the Express an IP from your ISP's DHCP pool of numbers.
- my issue is I can't stream itunes or get a
usb printer to work off the xpress USB port.
I have checked everything as my posts explain- The
reason I have been looking at this thread is I have
never been able to see the airport in a "scan" per
JDee post.
That is odd and doesn't happen on my wireless network!
Nor have I read in any post that an extra
ip address is necessary
All routers have at least two IP's - an external and an internal. When the router acts as an internal DHCP server it hands out many more IP's. Your Express gets one external IP and the default internal one is set to 10.0.1.1 and the first IP handed out is 10.0.1.2, etc.
However I have seen different subnets- from dncp
server.
Are you talking about the external IP's that your ISP is randomly assigning without your control? Are you talking about the different ways you can configure the internal DHCP numbers? If not there's something else going on. Everything on Douglas internal network should have an IP from the Express DHCP server vs. JDee's internal IP's should all be assigned by the modem/router DHCP server. Once you have everything on the same network numbers AirTunes, printers, and Airport Admin Utility lists just work!
Hey look I really appreciate your help here in
anyway- I'm really stumped. I want to stream music
really bad... and just don't see why it won't work-
its drving me crazy...
I enjoy a good challenge, especially when they are solvable. After trying all the possible software and connection possibilities there's always the chance it's been a hardware failure all along
What IP number does your computer have and what number does the Express have? If it's a router it has two IP's! -
Internet sharing works but the DNS part doesn't
I'm posting this message because I believe it is a bit different from other 'Lion internet sharing' posts in terms of the source of sharing and also the results I get.
Similar to other users experiencing the same problem, my internet sharing setup stopped working as expected after upgrading to Lion. However, I can't say it stopped working completely. It still does work but the DNS part doesn't. This means I can still perform pings, ssh and socket connections from computers using the shared connection. But I cannot browse the internet because web site names can't be resolved.
For example, my MacPro has two Ethernet interfaces. On one of them (en0) I vpn when connecting to work using a VPN service I created via System Preferences => Network. I used to share that VPN connection to computers using the 2nd one (en1). The other computers are linked to (en1) through a multiport hub. This setup used to work flawlessly in Snow Leopard and multiple users could use the shared vpn internet connection.
After the upgrade to Lion I can still see other computers on the local network and also ping any external internet site. I can even use Safari and navigate my ISP's home page using its IP address only. However, DNS doesn't work and internet domains cannot be resolved by name so internet browsing is not possible.
Furthermore, when I don't VPN to work but simply share the connection to the internet from (en0) to computers using (en1) everything works as it used to in Snow Leopard. The difference here is that the same DNS servers are used by both network services.
So far I'm stuck with these findings and I don't know where else to look for answers. Any input or feedback is greatly appreciated.I've to admit that i don't even know what VPN means.. but..
I have an 27" iMac (mid 2010), a iPhone 4 and a Macbook Pro 13" (mid 2009) .. and i used to share my ethernet connection to wi-fi on Snow Leopard. Since i upgraded to Lion (i'm using it since the first DP, and i think the internet sharing was working under the 1st DP .. i'm not pretty sure), it just doesn't work.
Just like solongpc, it does activate the internet sharing, my other devices can see and connect but neither of then (my iMac - host or my mbp and iphone) can navigate on the internet. And when i turn off my internet sharing (on my iMac), it still not acessing any website.. and i've to restart my moden. -
Sound not working, but itunes works
i dont know what happened. im assuming i pressed some configuration of keys and did something. itunes works, plays music, if you select a ringtone it works, but only for the preview and not when my phone is ringing. no other sound effects works. what gives? i turned it off and back on and nothing.
http://www.pinssible.com/blog/2013/07/padgram-has-no-sound-when-playing-instagra m-video/
I finally have sound thanks to this site!...
Essentially:
- double tap the home button
- swipe finger to the right & the orange music icon + play controls will appear at the bottom of the screen
- the sound icon will likely have a slash through it, indicating that the sound is muted --> tap the sound icon to remove this slash and turn the sound on
That's it!
*I also discovered that this set of controls provides quick access to altering screen brightness (located beside the sound icon), as opposed to adjusting it via settings (which is more time consuming)!!
Below are the directions provided on the site I referenced, which I paraphrased and provided additional details to above. Read these if you need further explanation:
"Open iPad “Settings” -> “General”, if “Use Side Switch to: ” is set to “Mute”, then make sure your iPad’s Side Switch is not turned on.
If “Use Side Switch to: ” is set to “Lock Rotation”, then double tap the “Home” button, swipe from left to right on the task bar, until reaching the first page. Make sure the “Sound” icon is not set to Mute."
I hope this solves your sound problem! -
My internet is working but my firefox is not opening any page.
I can't even access my modem page. Something is blocking my firefox to work because google chrome and internet explorer are working fine. I am using firefox 18 and I downloaded it today itself.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Internet is working but router is not
Hi... I just changed yesterday from Road Runner Cable internet to a local company that services my community called "EnTouch Systems." The internet works fine when I plug directly from the wall to the computer (modem that does the phone and internet is mounted in master closet now and runs through the walls and out outlets) but when I attempt to set up my Linksys WRTP54G (Linksys+Vonage from when we had Vonage) it does not work. When I run the setup CD it came with it gets all of the way to the end then I get a pop up saying there is no internet and to unplug my modem for 60 seconds which I then do but it accomplishes nothing. Can anyone help? *****NOTES***** I have read all of the suggestions on the forum like change the local IP and clone the mac address... i have reset both the modem and the router, tried new ethernets... nothing works. please help!
Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable
to the modem first once all the lights are solid green you could plug
in the power cable to the router & check out it will definately work!!
Configuration for cable connection:-
Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP ?. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then agian check the WAN Ip address ..... -
Internet is working but browsers will not load.
About a week ago my web browsers stopped working. I'm running Vista and I use FireFox. I also have Internet Explorer but neither of them will load any web page when i go to them. I know my connection is working because I can use any other program that requires internet. I've been told that I have a virus. I've ran Malwarebytes, RKill, Avast!, CCleaner, Advanced System Care, and I've tried a system restore but nothing has helped. Anyone have any idea whats wrong or how I can fix this?
I have the same problem as the poster for this thread. A couple days ago my web browsers stopped working. I was watching a live stream on TwitchTv (I watched through my Firefox browser) and Firefox had been pestering me with notifications to upgrade to version 27.0.1. After I concluded watching on Twitch I finally gave in and upgraded FireFox. It prompted me that the change would be in effect after a restart I shutdown my computer (and turned back on) instead of restarting it. When I tried to use Firefox, it wouldn't let me and said the quote below. Both Firefox and IE say the same thing: Unable to connect:-The site could be temporarily unavailable or too busy, try again in a few moments.-If you are unable to load any pages, please check your computer's network connection.-If your computer is or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web. I'm running Vista and I use FireFox. I also have Internet Explorer and Google Chrome but neither of them will load any web page when i go to them. I know my connection is working because I can use any other program that requires internet. I tried system restore, but for some reason the computer said it failed. I've checked all the connections and cables, rebooted my router and modem, ran Malwarebytes and AVG 2012 with updated content and I've tried a system restore but nothing has helped. I also followed your steps: Command Prompt and select 'Run as Administrator'. Enter the command listed below seperately and hit return after each one. ipconfig /flushdnsnbtstat -Rnbtstat -RRnetsh int reset resetlog.txt
netsh int ip resetnetsh winsock reset(But netsh int reset resetlog.txt and netsh int ip reset did not work) Anyone have any idea whats wrong or how I can fix this? -
Yosemite working but iTunes will not launch
Finally got Yosemite running OK on my MBP even though I could not redownload it from the App Store. iTunes has not been working through this whole ordeal so that is not surprising (I thought). But I just did a complete download of the Yosemite Installer so they must be separate. iTunes will not launch. The icon is in the Dock and it will bounce three times when I click it but it won't launch/open. Can this be fixed by launching the Yosemite Install app now in my Application folder? I haven't found a way to download/reinstall iTunes separately. I had/have iTunes 12.0.1.
I have had this problem, I even went into package contents to Macos folder, ane when I launched from there, it seems that Itunes is not conecting to a server, and hence times out with the spinning wheel of death so no matter how many tiles i uninstall and re install, it keeps coming back to this?
Gordon -
I can't seem to be able to connect this morning. Internet is working. I don't know what to check.
I am able to go to msn Hotmail with no problem. I have shut down and restarted but that didn't do
anything. I don't know what else to check.What is the exact message you get and when do you get it? What version of iPhoto did you have before the upgrade?
No backup, especially for a major upgrade?
OT
Maybe you are looking for
-
SSO for ALUI using OAM 10.1.4.0.1
Has any1 successfully tested SSO for ALUI or WCI using OAM??? I would appreciate if someone shares the policy created. you can send me an email to [email protected] Edited by: Ferry on Sep 24, 2009 11:07 PM
-
Mozilla sometimes goes a head and loads the new version and we do not get it in time. We may switch to Explorer to avoid continuing problems. Contact iYogi or McAfee for clearer explaination.
-
Connect CUP (in GRC 10.0) with ABAP CUA
Hi , Has anyone a short guide how to connect the CUP in GRC 10.0 with an ABAP CUA? We would like to use the CUP to trigger the CUA for the deployment of the CUP assigned authorisations. Thank you in advance! Br, Frank
-
Query on iphone 5 service in India
Hi All, I am planning to buy unlocked version of iphone 5 from US through authorized store and will be using the same in India. However, since Apple talks about providing the 1 year warranty, would like to know if anything happens to my iphone, will
-
Dear Experts I hope you all are doing well i encountered one issue with the invfoicig To print invoicing using VF31, the value for the field Date/time in output type must be 3. Configured default value for dispatch time to 3 but the Outp