HT201210 evrytime i try to restore my phone it says unknown error cant restore
everytime i try to restore my phone it says itune cant restore unknown error 2003
Hello,
Try completely reseting the device back to the factory defult, then try to restore it again.
I hope that works.
~Lt. Leviathan
Similar Messages
-
I have been up hours trying to figure out this error 36 and can't. All of the codes skip right over 36 as if it is not there. Don't understand please help. Trying to restore have the update downloaded in I tunes account.
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
My iPhone 5s is stuck in recovery mode and won't turn on, I've tried to restore and update it to iTunes and its finding my phone, but saying an error has occurred and won't work, the software is up to date, it just automatically switched itself off and when I try to turn it on, it shows the White background with the apple logo asif it's going to turn itself on but then switches off after a couple of seconds, what can I do? ive already taken it to a shop and he's looked at it, but said he can't fix it, thanks.
Visit an Authorized Apple Service Provider or Apple Store to get it checked. If they can't fix this, you'll have to pay the Out-Of-Warranty-Service fee to get a new replacement for a reduced price:
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone -
i have the version of itunes the ios 7 update requires but every time i try to update my phone it says i need the itunes version 11.0.5 but i already have it?
You need iTunes 11.1 which is not available for download in google chrome or other browsers. The only browser it has worked for with me is Safari. Hope this helps!
-
When i try to restore my ipad min it says unknowna error 14 and i cant restore it
When i try to restore my ipad min it says unknowna error 14 and i cant restore it
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
In my computer some of the iTunes files got deleted accidently and I couldn't reinstall it . Evrytime I try torun setup file I am getting this error message"C:\Users\Rif\AppData\Local\Apple\Apple Software Update\" ,appreciate if anyone can help me on this pls?
Even after deleting all files and folders from hard drive i am still getting this error!!
-
When I try to charge the phone it says for faster charge use original cable
Just got my Note 3 late yesterday afternoon. When I try to charge the phone it says for faster charge use original cable and that is what I am doing. Even tried a different charger and it says the same thing so I have not been able to use my phone at all. Please help. I am going back to the store today when they open. Help!!!
I want to help make it as easy possible to charge your device myluv2drive! Is this happening with the original charging cable itself or is this an alternate charger? Have you tried a battery pull since this started? Did this happen the first time you tried charging it? Any different response when trying alternate outlets?
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport -
when i try and restore it, it says unknown error, Itunes is fully up-to-date, ive changed ipod charger chords, ive put in different usb drives also (HELP)
I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
Restoring i phone 3gs getting unknown error 28
Restoring i phone 3gs getting unknown error 28, restore failed....
what error code is it?
Check out http://support.apple.com/kb/ts3694 for causes and solutions ! -
how do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured
http://support.apple.com/kb/TS3694#error1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
http://support.apple.com/kb/TS3694#error1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
Please can somebody help me? My imessage does not work, I try to activate it but it says an error ocurred during activation. try again
Its possible that the server can be down now. Have you ever used it before? If you want, try resseting the phone by just holding the sleep/wake key and the home button together for 10 seconds. Then wait 5 seconds when it turns off and press the sleep/wake button to turn it back on. Then try it again. Let me know what the results are.
-
when trying to restore my iphone its says unknown error (-1) what should i do??
http://support.apple.com/kb/TS3694
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
Cant restore my itouch its says unknown error
We bought an ipod touch off someone and when you try to restore it says unknown error so I dont know what to do please help is it a lost cause?
What was the eaxact wording of he error message? Almost all time an error number is also specifies. Here is a listing of the common errors and their solutions.
.iTunes: Specific update-and-restore error messages and advanced troubleshooting -
Can anyone help me? My iPhone 5s is flashing the apple screen on and off and I can turn the phone on properly or off. When I connected it to iTunes on my windows 8 computer I got the following message: iTunes could not connect to this phone. An unknown error occurred OxE8000084. Can anyone help me correct this so I can start using my phone again.
Thank youhttp://support.apple.com/kb/TS3221
-
So...I'm trying to transfer my itunes music to my laptop. I set up a new itunes on my laptop and, with great difficulty (I'm not technical), I've managed to be successful with the help of my memory stick, which saves wasting CDs.
However, for some reason a few tracks by a couple of artists don't seem to have transferred. So I had the idea to burn a CD and then copy that directly to my laptop.
There doesn't seem to be any trouble burning the CD - that works fine. I just select audio CD, and done within a minute or so. But when I then put the CD in my disc drive, it doesn't work.
It says 'track 1', with no other tracks for the entire CD. When I try to import it, it says 'unknown error -50'. I've tried tinkering with the import settings, but it makes no difference.
Does anyone have any ideas?
I'm not that computer literate, so please make it idiot proofYou can use the bootstrap tar.gz files that are found in the same directory as the iso on every mirror. If you go to the download page, select the mirror of your choice, you will see a file called "archlinux-bootstrap-2013.10.01-x86_64.tar.gz" (one for i686 also). That is what you need.
Unpack it whereever you think is appropriate, if you have enough RAM you can use /tmp. Then after setting up the partitions in the host (Kali/Debian, or whatever), you can arch-chroot to that unpacked directory. There you will find all the tools necessary to install (pacman and the arch-install-scripts).
This method has one issue though, and that is that the arch-chroot script (and maybe others) requires some pretty new versions of various things. In particular, I think that a pretty new version of bash is required. So I am not sure about the viability of this solution on anything debian, as their stable repos tend to be pretty conservative. It also means that you need to have a pretty good understanding of the install process, as you will still mostly follow the beginners guide, but it will require a few changes in the procedure.
Good luck.
Maybe you are looking for
-
Whats the Tcode to find out GR/IR Open Line Items???
-
OS 10.4.6 won't restart or shut down
I installed 10.4.6 on my powerbook g4 that was running 10.3.9 without a problem. Big mistake. I repaired permissions, then custom installed 10.4.6 skipping the foreign language fonts and printer drivers I don't need. Installation was successful. Set
-
i recently got IOS 8 and I like it but there is one problem on my camera roll it says i have 600 photos but i went into setting general and about and it says i have 2,743 photos my photos keep on duplicating how do i get this to stop. i have a iPhone
-
Change administrator name without starting over.
Hope someone can tell me how to change the administrator name and or delete the one that's in there that was cemented in the system when I got the computer and replace it with my name, without re-formating the drive and starting over. It's a G4 tower
-
Konica Minolta printer driver on Lion
I have Konica Minolta laser printer 2530DL and tried to install SL drivers - they ineed do install, but after sending some documents to print, nothing happens. Does anyone have any idea about possible update or any other possible solution? Tnx.