HT201210 what is error 6 during update process

What is an error 6 during update process?

Not a gppd error:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

Customer Coversion Using Interface Table - Error during update

I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
racudc: ORA-20212: Enter valid Billing Fields.
ORA-06512: at "APPS.ADVOAR_CUST
racudc: Error updating customers.
or
racudc: updated 1 partiesracudc: Partyrel 1 parties
racudc: ORA-20210: You have edited one of the following fields, Extended Billi
racudc: Error updating customers.
Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
The following is the test record I inserted for updating the customer I created and ran the customer interface:
insert into ra_customers_interface
(ORIG_SYSTEM_CUSTOMER_REF
,INSERT_UPDATE_FLAG
,CUSTOMER_NAME
,CUSTOMER_STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,CREATED_BY
,CREATION_DATE
,ORIG_SYSTEM_ADDRESS_REF
,ADDRESS1
,CITY
,COUNTY
,STATE
,POSTAL_CODE
,COUNTRY
,customer_attribute13
values
('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
,'U' --INSERT_UPDATE_FLAG
,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
,'A' --CUSTOMER_STATUS
,-1 --LAST_UPDATED_BY
,sysdate --LAST_UPDATE_DATE
,-1 --CREATED_BY
,sysdate --CREATION_DATE
--,'Y' --PRIMARY_SITE_USE_FLAG
--,'BILL_TO' --SITE_USE_CODE
,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
,'1 River Road, Bldg 1' --ADDRESS1
,'SCHENECTADY' --CITY
,'SCHENECTADY' --COUNTY
,'NY' --STATE
,12305 --POSTAL_CODE
,'US' --COUNTRY
,'55'
I am testing this in 11.5.10 env. Any help on this is appreciated.
Thanks,
MK

Convert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
http://www.e-datapro.net/data_conversion.htm

Error during proxy processing

Hi Experts,
We have a web service hosted on PI and getting the Tax Jurisdiction values from Taxware via ECC(ECC has a TCP/IP connection to connect to Taxware system, From there ECC gets Taxjurisdiction Codes and gives back to PI).
When we make a call to this Web service following Error response has been given. Please let us know what could be the reason.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1 />
<SAP:P2>ZCL_GET_TAX_IN</SAP:P2>
<SAP:P3>GET_TAX_JURISDICTION_SYNC</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing Message E TAX_TXJCD 110 cannot be processed in plugin mode HTTP</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Thanks,
Sekhar.J

Hi,
We are using XI adapter. The same Web Service is working good in Development and Quality Enviroments, I am wondering why it is failing in Production Environement intermittently. And also in ECC we are using TCP/IP connection to fetch Tax Jurisdiction codes from TaxWare System. This TCP/IP connection was configured in SM59 of ECC. PI will make call to ECC and ECC will make call to TaxWare and returns the result back PI.
Thanks,
Sekhar.J

HT1320 Ipod 4th gen was accidentally disconnected from laptop during update process. Now permanent screen pic is of power cord w/ an arrow pointing up to itunes. Holding the ctr & power buttons together has no effect for reset.

Ipod touch 4th gen was accidentally disconnected from laptop during update process. Now permanent screen pic is of the power cord w/ an arrow pointing up to itunes symbol. Holding the ctr & power buttons together for 6-10 sec causes apple pic to briefly appear and power cord/itunes pic reappears. Powering off and on has same effect. Attempting to reset.

It sounds like the iPod touch is in Recovery Mode, Try to restore it from iTunes again.
If you run into an error when restoring the iPhone again, take a look at this Apple doc -> iOS: Resolving update and restore alert messages

Communication channel: error during update

Hi,gurus:
We are doring a soap2rfc scenario.
After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!

hii
ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
Regards

DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

Hi,
SRM 7.0 contains 2 clients:
Sender: 100 for EBP, logical system is CLNT100
Receiver: 200 for SUS, logical system is CLNT200
both the clients are connected through PI 7.0, logical system of PI is CLNT001.
From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
In PI also msg is processed.
But in SUS200, it is showing below error msg:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls help in resolving the same....
tnx n rgds,
balu

Hi,
How did you solve the issue? Can you please provide the solution.
Thanks,
-Devi Swain

ME 808: System error: error during update Table EKAB

Hi,
Couple of years ago, during carve out, one of the contracts was deleted.
A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
Can anyone help how to resolve the issue?
Any body had similar situation?
Thanks for your help.
Regards,
Shiva

Hi,
I am not sure how the external consultants deleted this contract during carve out.
Our division was bought out from another company and moved the data to our SAP system.
I checked the OSS and found note 922427 could resolve the issue.
Thanks for your response.
Regards

Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

Hello,everyone!
My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detialed error from SXMB_MONI,
Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
Regards,
Baskaran K

HI,
This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
We have one more error message
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
Regards,
Baskaran K

Error during Proxy Processing from ECC system

Hi All,
I had created Webservice using ABAP in ECC system with Message interface designed in XI system. This Webservice will simply displays employee address when you enter employee id and address type.During my testing of Web service in ECC system via Tcode WSADMIN, I am getting below error
"An error has occurred. Maybe the request is not accepted by the server: "
"Error during proxy processing"
Request
POST /sap/bc/srt/xip/sap/Z_ADDRESS_01?sap-client=100 HTTP/1.1
Host: rpmsap3.rapidigm.com:8080
Content-Type: text/xml
Connection: close
authorization: <value is hidden>
Content-Length: 389
SOAPAction: ""
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope> HTTP/1.1 500 Internal Server Error
set-cookie: sap-usercontext=sap-client=100; path=/
content-type: text/xml; charset=utf-8
content-length: 270
sap-srt_id: 20061111/154215/v1.00_final_6.40/A901A40749EEA74BB8D8AB72B56C02A7
server: SAP Web Application Server (1.0;640)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Server</faultcode><faultstring xml:lang="en">Error during proxy processing</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
Appreciate any help on above issue
Regards
Manish Mundra

Hi All,
Please help on below issue.
Thanks in Advance
Regards
Manish

Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

Hi All,
I am facing the following problem in production server when even the file got processed successfully .
Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
Can you please suggest how it can be handled?
Regards,
Saras

You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
VJ

Communication channels error during update

Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
Regina

Hi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta

Error during update download

I can't open my itunes
there was an error during update download

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

[SOLVED] Error during update of LUKS header on device ./file

dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)

Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16)

Error during update of Table VBAP (RC= 4, Key= 5096672)

Hello experts,
i am getting error as
Update was terminated
System ID....   Q70
Client.......   999
User.....   HPROLLSD
Transaction..   VA02
Update key...   4EF9258A885201B1E10080000A140014
Generated....   28.12.2011, 18:08:25
Completed....   28.12.2011, 18:08:25
Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
Narendra

Hi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram

HT4623 what is 3004 error during updating iphone

i have downloaded the ios 7 but during updating it is giving error of 3004. plz guide me

https://discussions.apple.com/thread/4034118

HT201210 what is error 6 during update process

Similar Messages

Maybe you are looking for