HT201262 Fonts and graphics are slightly "fuzzy". Colors are not correctly displaying

After Mavericks installation on my Macbook Pro mid-2012 (non-retina), the fonts appear slightly fuzzy, the graphics seems less crisp and the colors are just "off". This issue seems to be system wide but is much worse whilst using Safari for some reason. (Safari 7.0)
Please advise and thanks in advance for any and all help/suggestions!

Hi,
There should be some problem with system settings. First of all, please check fonts size setting in Windows personalize.
Roger Lu
TechNet Community Support

Similar Messages

  • [SOLVED] vim color highlighting not correctly displayed in vc/tty

    For instance visual selection is set up to change fg/bg to black/green but changes fg to green. Under x using urxvt it displays correctly.
    Last edited by Noble (2010-07-26 21:22:19)

    I have written my own syntax highlight theme, post below. If you think your script could do anything about it after looking at the file please post But as I said, vim works fine in urxvt, but not when I switch out of X and run it in the vc/tty.
    :set statusline=#%n\ %y\ %F\ %r\ %=%c\ %l/%L
    :set hlsearch
    :set nocompatible
    :set noexrc
    :set number
    :syntax enable
    :set autochdir
    :set backup
    :set backupdir=~/.vim/backup
    :set directory=~/.vim/tmp
    :set autoindent
    :set ruler
    :set nowrap
    :set nocp
    :set scrolloff=5
    :set sidescrolloff=5
    :set fileformats=unix,dos,mac
    :set title
    :set laststatus=2
    :set tabstop=4
    :set autoread
    :set showcmd
    :set showmatch
    :set shiftwidth=4
    :set smarttab
    :set backspace=indent,eol,start
    filetype on
    filetype plugin on
    filetype indent on
    hi clear
    set background=dark
    if exists("syntax_on")
    syntax reset
    endif
    highlight ErrorMsg ctermfg=red ctermbg=none cterm=bold
    highlight WarningMsg ctermfg=red ctermbg=none cterm=bold
    highlight VertSplit ctermfg=green ctermbg=black
    highlight Folded ctermfg=magenta ctermbg=none
    highlight FoldColumn ctermfg=magenta ctermbg=none
    highlight FoldColumn ctermfg=magenta
    highlight LineNr ctermfg=green cterm=bold
    highlight ModeMsg ctermfg=lightgreen cterm=bold
    highlight MatchParen ctermfg=black ctermbg=green
    highlight Normal ctermfg=white ctermbg=none
    highlight SignColumn ctermfg=magenta
    highlight NonText ctermfg=blue
    highlight Question ctermfg=red cterm=bold
    highlight Comment ctermfg=8
    highlight Constant ctermfg=green cterm=none
    highlight Identifier ctermfg=white cterm=bold
    highlight Statement ctermfg=lightgreen cterm=bold
    highlight PreProc ctermfg=10
    highlight Type ctermfg=2
    highlight Special ctermfg=cyan
    highlight Error ctermfg=red ctermbg=none
    highlight Todo ctermfg=yellow ctermbg=none cterm=bold
    highlight StatusLine ctermfg=black ctermbg=green cterm=none
    highlight StatusLineNc ctermfg=black ctermbg=lightgreen cterm=none
    highlight Directory ctermfg=white
    highlight Search ctermfg=black ctermbg=green cterm=none
    highlight Visual ctermfg=black ctermbg=lightgreen
    highlight WildMenu ctermfg=black ctermbg=cyan cterm=none
    highlight Pmenu ctermfg=black ctermbg=green
    highlight PmenuSel ctermfg=black ctermbg=lightgreen cterm=none

  • Touch panel fonts and Graphics

    Gentlemen
          In addition to my previous issue, I would like to ask regarding touchpanel TPC-2006 fonts and graphics. See, for our client we plan to give four screens in touch panel and in one screen it is with list of alarms. So here when list box control is drag n drop into front panel its showing horizontal and vertical scroll bar perfect,but when deployed to touch panel its surprise horizontal screen bar not seen this is one issue and also all fonts are not clear and things that seen in front panel when deploy its not shown in TPC why? is there any way if so please help me
          I Have attach snap shot of it see in that in my front panel screen i hv got horizontal scroll bar, column header but in touch screen couldn't get all this. hope it will help to get better idea .
    thanks
    Attachments:
    Front panel.JPG ‏59 KB
    touch panel screen.JPG ‏21 KB

    The graphics and font rendering in the touch panel module is a known issue.
    As you have found out, the rendering of text and graphics on the TPC platform is not the same as running under Windows. The only way I have found to work around this issue is to continue to play around with the layout on the panel until you get acceptable results on the TPC.
    I had an application a couple of years ago that was deployed to the TPC-2006 platform. When all was said and done, in order to get an acceptable looking panel on the TPC-2006 the windows panel looked severely misaligned in some areas.

  • Bitmapping Fonts and Graphics in Mountain Lion

    My fonts graphics are bitmapping whenever I use Adobe CS5 (specifically, Illustrator and Indesign). Then I noticed that fonts and graphics are bitmapping in Chrome as well. It seems to work fine in Safari, but I still see some bitmapping, such as the editing bar above, as I type this question (in Safari).
    I've also get a MacBook Pro 15" with Retina display.
    Any ideas?

    Here is an interesting discussion on the same topic:
    https://discussions.apple.com/message/16898528#16898528
    The license doc can be found by clicking on the font you want in Font Book > Preview> Show Font Info.

  • How do I change the font and graphic size when using Firefox

    I have recently switched from Windows to Mac. When resizing the window in Mac the font and graphic size do not follow -- they stay the same size and only more "white space" is created by increasing the window size. How do I get the graphics and fonts to adapt to the new window size or at least make the whole image bigger. I am using Firefox 3.6.12 and Mac OS10.6.5. Thanks for the help.

    You can select to zoom the full page or only the text: View > Zoom > Zoom Text Only<br />
    Firefox 3 can remember the zoom level site specific.
    See:
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    * http://kb.mozillazine.org/browser.zoom.siteSpecific
    * http://kb.mozillazine.org/browser.zoom.full

  • Projects are seen in workspace but not getting displayed

    I have some Web dynpro, JEEE, Dictonary DCs and projects in workspace, but it is not getting displayed when I open NWDS.
    I have given the correct workspace path but still the Project explorer is blank
    Please help.
    (P.S. NWDS was shut down improperly.)

    Closing this thread

  • I dont know my security questions and the email with those questione is not correct

    i dont know my security questions and the email with those questione is not correct

    I would contact Apple ID Support.
    Apple ID Support

  • Fonts and graphics are slightly "fuzzy". Colors are not correctly displaying. Help?

    After Mavericks installation on my Macbook Pro mid-2012 (non-retina), the fonts appear slightly fuzzy, the graphics seems less crisp and the colors are just "off". This issue seems to be system wide but is much worse whilst using Safari for some reason. (Safari 7.0)
    Please advise and thanks in advance for any and all help/suggestions!
    **P.S. I accidentally posted this same question earlier in the wrong forum/discussion but I cannot figure out how to delete/edit it, so I apologize if you see this posted twice.

    http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Haaga" <[email protected]> wrote in message
    news:e4t6bv$olq$[email protected]..
    > Any idea where I could find a list of "standard" fonts
    or colors?

  • Why are my fonts and graphics not showing up on some computers?

    Help for a newbie?
    I just published my first website! It's pretty basic, but I
    learned a lot.... But some of the colors and fonts show up
    differently on different computers. Also, I created an image that
    had gray and white marbling and it showed up as just gray on the
    website.
    Can you tell me what I need to do to make my graphics show up
    properly?

    > Colours are subjective which is why there are "web safe"
    colours, these
    are
    > alleged to look the same on every PC
    Sorry, but that is NOT what web-safe colors refer to. In the
    old days many
    users had 8-bit graphics cards capable of displaying only 256
    colors.
    Web-safe colors were those included in the most common 256
    color palette.
    Today hardly anybody uses 8-bit graphics cards so designers
    are safe using
    full-color (24- or 32-bit) palettes. Your comment that colors
    are subjective
    is correct if you mean that colors will often display
    somewhat differently
    computer to computer. This is because of the wide variation
    of graphic
    cards, monitors, room lighting, etc. What looks like dark red
    on my screen
    might look brown on another. This is unavoidable.
    Walt
    "Ian" <[email protected]> wrote in message
    news:e4t54o$n2p$[email protected]..
    > Hi
    >
    > Colours are subjective which is why there are "web safe"
    colours, these
    are
    > alleged to look the same on every PC
    >
    > Fonts as has been said if you are using a non standard
    ie not installed by
    > both windows and apple then the viewer will not see
    them. In which case
    the
    > page will default to a basic font. which of course ruins
    your layout.
    >
    > Embed them as flash or graphics
    >
    > cheers
    >
    > Ian
    >
    >
    > "Haaga" <[email protected]> wrote in
    message
    > news:e4t3b1$ks6$[email protected]..
    > > Help for a newbie?
    > >
    > > I just published my first website! It's pretty
    basic, but I learned a
    > > lot....
    > > But some of the colors and fonts show up
    differently on different
    > > computers.
    > > Also, I created an image that had gray and white
    marbling and it showed
    up
    > > as
    > > just gray on the website.
    > >
    > > Can you tell me what I need to do to make my
    graphics show up properly?
    > >
    >
    >

  • Adobe and Microsoft apps are crashing. iWork colors are corrupt.

    I'm not sure if this is due to the Snow Leopard upgrade or because I had a HDD meltdown and restored from a time machine backup.
    Every other app that I open is crashing. Microsoft Excel and Adobe Photoshop are crashing at will (in the background) and often when trying to save a file. Photoshop was giving me a license error but I resolved that with various hacks found online including deleting the FLEXnet folder.
    iWork apps don't show proper colors with fonts, shapes, cell fills, etc. Most colors are showing as white. Blue is really the only color that is visible though it's not the correct blue.
    Of course this is all on the eve of me having to finish a project onsite 1,000 miles from home. I'm pretty much stuck without the ability to do ANY work here. Any help would be greatly appreciated.

    try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
    If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    If the issue is systemwide then, you may be able to repair this by re-applying the10.6.1 stand alone update
    -mj

  • My website background image color is not correct in Safari????

    On my website my background jpg image that appears in bottom left corner is not correct in Safari. In ALL other web browsers (Firefox 3.1, IE, Opera, etc) my website looks fine! So it must be a setting or error in Safari. The jpg image in question has a background color of 191919 (dark gray) and it matches in Firefox and IE, etc... but not in Safari? In Safari my jpg image is a lighter color than rest of webpage. My header is the same type of file (jpg with #191919 background) and it looks fine... THAT is the strange part!
    Is this a known issue with safari or am I doing something wrong? I have tried no color management on the image in Photoshop and with color management in Photoshop (when I save for web) and this doesn't seem to matter. It is driving me crazy. My website looks silly in Safari with this error. www.eXacteXposure.com is the website.
    David

    flynlyons2 wrote:
    On my website my background jpg image that appears in bottom left corner is not correct in Safari. ... My website looks silly in Safari with this error. www.eXacteXposure.com is the website.
    I'm not seeing that problem here, either (Safari 3.1.2 in Mac OS X 10.5.5). The image at the bottom left corner matches the background nicely.
    Have you looked at your site on more than one Mac running Safari? My thinking at this point is that your web site and images are fine, but there's a problem with your installation of Safari. Do you have any third party Safari "enhancers" or hacks installed?

  • Is it possible to get my fonts and graphics more like Ubuntu.

    Is it possible to get decent graphics in Arch?  I've tried all sorts of things and I never seem to get things the way I want.  At work, I use Ubuntu 11.04 with GNOME fallback and I really like the fonts under the stock setup, but I can't seem to get Arch to do the same.  In fact, I nearly can't stand reading pdf files (something I do a lot of for work) in Arch, because they are rendered so poorly.  It is as if the whites are two white and the blacks too black, and there is a yellow like haze around the fonts.  It is nearly painful to look at for extended periods!  My hardware at home is comparable (if not better) to my hardware at work, so it doesn't make sense for it to be that way.   
    If I've got an ATI Radeon HD 4670 card, should I use the proprietary driver or generic driver? Or, does it not even matter? 
    I've installed and messed with the infinality font patches, but I can't seem to get anything good with them either.  (I posted about font problems a while back, but I've upgraded a lot of hardware since then.) I've looked at the ubuntu font packages, but everything I see states that they are outdated. 
    I like Arch, because it is light and snappy compared to Ubuntu, so I don't want to switch OS'es.

    I took a quick look at the Ubuntu packages for evince and poppler, and couldn't see an obvious reason for improvement over stock.
    Poppler's font rendering is known to be bad (and difficult to fix).
    The quality of individual monitors is one of many variables that can make a huge difference to the perceived quality of fonts.
    The radeon vs ATI proprietary driver shouldn't make any difference, unless the open-source driver is royally broken, and I can't recall anyone else calling such brokenness plausible - it would be blatantly obvious to every user of it, surely.

  • Keynote to ipad, with custom fonts and graphics

    Have a keynote presentation we've spent a lot of time on.
    Custom fonts, graphics.
    I've given up trying to import it into keynote on the iPad. Fonts alone are a big issue.
    So, trying converting it to quicktime, but then it plays as a movie, there is no simple, elegant solution to pause, or tap through the presentation.
    Or, am I missing something?!
    Appreciate any help.
    Charles

    Hi, i found this "solution".
    It's impossible to upload new fonts on iPad, but you can convert your slides in pictures and upload your new presentation on iPad.
    I dont' like it ... but it's the one way i found.
    http://cursorgaze.com/using-custom-fonts-on-keynote-for-ipad-and-slideshare/

  • HT201210 Why are my ipad colors are all green and pink?

    Why are my I pad2 colors all green and pink?

    Because something is wrong.
    To fix, try:
    - A reset. Nothing is lost
    Reset : Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings.
    If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Both the Texts and Graphics When I open windows are too large and blurry. Is this anyway I could fix this?

    When I open Firefox (Firefox is updated to its latest version) both the text and the graphics are too large. I've tried zooming in and out features, but the texts become unreadable.

    CTRL+0 (<--that is a zero) will reset your zoom level on affected pages. Firefox remembers the zoom level you last used on a page.<br />
    See Firefox built-in Zoom functions:
    *http://support.mozilla.com/en-US/kb/Page+Zoom
    *http://support.mozilla.com/en-US/kb/Text+Zoom
    If that does not fix the problem, you can try renaming the file (''with Firefox closed; Firefox button > Exit or File > Exit'') '''''content-prefs.sqlite''''' to content-prefs.sqlite.old (or delete the file) in the Profile Folder to reset the page zoom on all sites. That file will be re-created when you restart Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *You can use the following to go to the Firefox profile folder:
    **Help > Troubleshooting Information > Profile Directory, click Open Containing Folder
    Zoom Add-ons:
    *'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ '''''
    *'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    **More info on NoSquint: http://urandom.ca/nosquint/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Maybe you are looking for