HT201269 ios7 update to blue screen

I had a popup asking to update to ios7.02 last night, I hit the details button and now my phone will not turn back on.  I do get the moving circle  in the middle, but more importantly I get the blue screen of death!

Not uncommon problem. Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

  • J2SE Runtime V5 Update 6 = Blue screen of death.

    Hi,
    My Windows XP Home (with SP2) has recently installed the Update 11 as one of the local Admin and started crashing.
    So, I started uninstall using "Add Remove Program" to remove Java Update one at a time started from Update 11 to lower number.
    By Update 6, I consistently getting blue screen of death and the uninstall won't finish.
    How can I gracefully remove Java Update 6 and J2SE? I've tried Safe Mode and didn't work.
    I've chkdsk and analysis the disk and both reported fine.
    Thanks.

    Hi I had the same trouble and used system restor to fix it and im not reinstalling java till they fix it. Havnt had a blue screen sence i restored the computer to the date just befor i installed java.

  • Recent software updates causes blue screen

    I installed Leopard last week and it's been working just fine.
    Last night the software update application upadted 5 apps - iTunes, Quicktime, Keychain, and a couple others I can't remember. Since the update I havn't been able to login and use my system - when it starts up it eventually stalls at a blue screen.
    I've read reports of people having this issue after upgrading to Leopard, but like I said, I upgraded to Leopard just fine and have been using it for over a week.
    I just discussed this with a support agent who suggested I try another archive & install - I'll post the results.
    In the meantime, has anyone else run into this?
    Also, would Audio Hijack's Instant Hijack (Rogue Amoeba software) and Little Snitch be considered "extensions" that might lead to this issue?

    As it turns out, I had an Application enhancer I didn't even know about. I must have installed it a long time ago, tried it, lost interest, and forgot about it.
    I followed the steps here: http://docs.info.apple.com/article.html?artnum=306857 and I've managed to boot and login.
    Here's some more reading that may be of interest:
    http://unsanity.org/archives/macos_x/shock_andawe.php
    http://www.unsanity.org/archives/haxies/leopard.php

  • BIOS Update causes Blue Screen of Death - PLEASE HELP

    PLEASE HELP!!
    After recently reformatting a Lenovo 3000 N200 (XP SP3), I downloaded the Lenovo Care (or whatever it's called), which downloaded a whole lot of updates, drivers....
    The last thing that was downloaded was a BIOS Update. Before flashing and reprogramming the BIOS, the program created a backup of the old BIOS.
    Since the BIOS Update, I can no longer turn on the laptop without the BSOD (Blue Screen of Death). When I try to turn it on, it shows the Lenovo startup screen, then goes to the "previous attempt was interrupted" menu (the menu where you can choose 'Safe Mode'...), and no matter which option I choose, it starts to show the XP startup screen (with the progress bar), for 1/2 a second, then displays the BSOD for 1/2 a second (too fast too even read what it says or even get the error code).
    What can I do to remedy the situation? Can I somehow access the backup of the old BIOS to restore it? Or is there something else I can do?
    BTW, When I click F1 on the Lenovo startup screen (to get into the BIOS settings) it shows the BIOS version to be "68ET35WW (V3.03) - which is apparently the latest version for that laptop
    Message Edited by yksnirk on 01-20-2009 08:15 AM
    Message Edited by yksnirk on 01-20-2009 08:15 AM

    If you have restored the device as new and tested it without using your backup and it is still malfunctioning, then you need to make an appointment with the Genius Bar of the nearest Apple Store or Authorized Apple Service provider, depending on your location, and have the hardware checked.

  • Satellite A500 - Updates causing blue screens

    Hi all
    Everytime an update happens, I get blue screen crashes, the system restores to an earlier point but then wants to do the updates again?
    I'm going round in circles
    Any idea what to do?
    Thanks

    Take a look into your first thread about the same theme:
    http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=198859

  • New Mac Software update causes blue screen

    Hello, I need some help...
    I Updated my Macbook Pro with the reqular Mac software update (includes quicktime, itunes and a couple others) I was given the option to "shut down" or "restart"...
    I clicked "shut down".
    My computer then proceeded not to turn off but simply turn to a blue screen...
    After some time I turned off my machine and restarted it...
    It took a little longer time to start up as it usually does after a software update...
    But after going through the main white screen with the apple, then moving through to the next screen that has the loading bar. that loading bar window comes up for a split second and then disappears leaving a blue screen with the cursor and then does nothing more...
    I am stuck with a blue screen and a curser...
    I have already tried to start up in safemode...
    Any help would be much appreciated

    Very astute question, for Tiger on Intel you must use the exact install disk for that Model, Gray in color for one thing.
    One thing to try other than a Safe Boot...
    Tough without the Install disc, but some things to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    Tough without the Tiger Disk problems, but try fsck...
    To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
    1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
    2. At the command-line prompt, type /sbin/fsck -fy
    (SPACE between fsck AND -fy important)
    3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:

    The volume (nameofvolume) appears to be OK 
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
*** FILE SYSTEM WAS MODIFIED *** 

Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    http://docs.info.apple.com/article.html?artnum=106214

  • Updating bios = Blue screen

    Hello, when i try to update my bios i get "blue screen of death" a blue screen saying that something have happend and windows need to be closed. Im trying to update my bios becuase games are choppy. Like WoW, tibia and such. And my computer shall make those games. PLease help me! 
    Specs:
    Windows Vista Home Premium 32bit (6.0 build 6001)
    AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ 3GHz.
    MSI K9VGM-V
    2x 1gig 128Mx64 DDR2
    Nvidia Geforce 8600 GT 256mb
    Harddrive Samsung 500GB
    BIOS: Phoenix - Award WorkstationBIOS v6.00PG

    Quote from: Fredrik on 29-November-08, 08:51:54
    Like said, if a problem isn't explicitely fixed by a BIOS update, don't.
    Choppy video sounds like a problem with the graphics card driver.
    But I did this week's guessing just in the other post, so please say:
    What the BSOD say.
    What game is choppy - say em all, please.
    PSU is also very good to know.
    WoW
    Tibia
    I got good fps at both games but they are choppy.
    And i cant read what the BSOD say becuase it is only showing like 2 sec then restarting.
    Quote from: Henry on 29-November-08, 08:52:32
    Whether you suck at computers or not has nothing to do with it. We are here to help each other out with solving problems and advice/warnings where needed.
     What makes you think a BIOS update will fix your problem? What you decribed does not look like a BIOS problem.
     Read this >> Forum USB BIOS flashtool << and >> motherboard & BIOS ID << Download & run this >> Central Brain ID << it will give you the OPN number of your CPU.
    First i have one question..what is "VIA Serial ATA Controller - 0591" a program says that i dont have that updated. It is under "IDE ATA/ATAPI controllers".
    Damn i just saw that im using the ADX6000IAA6CZ  (125W)!!!
    http://img383.imageshack.us/img383/4205/cbid01sx5.png
    http://img383.imageshack.us/img383/3384/cbid00ce1.png
    CPU                                             FSB / HT BUS                Ratio             Result
    Athlon 64 x2 6000+ (G2, 89W)             200                          15.5           SINCE 1.8 
    PSU:
    350W output
    +12v =18,0A
    PLEASE DO NOT REMOVE THIS THREAD, HELP ME! :'(

  • Satellite L840 - BIOS update and blue screen

    Hello,
    I recently bought a Toshiba L840-04E (PSK8LA- O4E007) and installed Windows 7 64bit.
    Issue: BlueScreen
    Question: I assume this is the dreaded "blue screen of death" and I need to do something to prevent servious problems in the future (I've used the laptop lightly for a couple of days with no issues).
    How do I analyze the dump information to find out what caused the blue screen?
    Or is it best to go back to the last restore point before the blue screen event? A restore point was made before I updated the BIOS from v 1.80 to 6.20. Also, Toshiba shows that there is a new BIOS 6.30 version.
    Before the blue screen event I had changed the setting for the on/off button to "shut down" and made a few minor other changes to settings and then just before the blue screen error I plugged in a Seagate External Hard Drive.
    Are there any suggestions about what steps I should take?
    Thanks so much.
    April

    Hi
    Generally the BSOD appears due to serious software problem or hardware problem.
    You said you connected an external USB HDD to the notebook right before the BSOD appeared so probably the BSOD was caused by the attached HDD who knows
    If this happened for the first time, dont be afraid it could be just a temporal problem
    But if it would appear often, you should investigate a little bit and should try to replicate the issue and the reason for that

  • Lenovo G530 bios update now blue screen!!!

    Ok i have a lenovo G530 with service code 4446-23u. I downgraded to windows XP and it was running fine. I was on lenovo.com and saw that there were newer bios then what i was using(i think i had 1.06, and there is now 1.09 ) so i decided to flash my bios to get them up to date. It flashed fine and asked me to reboot so i said Ok and now everytime i try to start the computer it goes through the bios screen onto the windows XP boot screen then flashes the "Blue Screen" and reboots. It won't start in safe mode or any mode. I put in my XP disk to reinstall XP and i get it to boot from cd and it loads for a while then goes to the "blue screen". Anyone know what is causing this? or how to fix it? I am completely fine with going back to the old bios but don't know how to do that or if its possible.
    these are the bios i used:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70994
    Please help, and thanks Jared
    Solved!
    Go to Solution.

    Got it figured out. I had to change the Sata in the bios back to ide.

  • Satellite A500 - Blue screen - critical errors - reboots!

    This laptop is driving me mad, why did I ever get rid of my other notebook??
    This machine caught my eye, it looks fab, but performance wise it is extremely poor - blue screens and reboots all the time, with critical errors - I've had enough!! Only bought it on 7th Jan this year, and it has done this ever since new, it has to go back!
    And by looking at the posts on this forum the problem appears prevalent, and none of the experts seem to have an answer?? Should I reallybe having to upgrade the Bios and drivers and searching for solutions to try and resolve the many issues with this machine???
    I'm gonna get a refund and buy something reliable, sorry Toshiba but I can't endorse this machine, it has caused me nothing but grief!
    Very upset, especially as this was a gift 8-(

    *This is what happened 5 mins ago, switched machine on checked emails was saving a picture of my new grandson from one of the emails, blue screenedbelow*
    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 2057
    Additional information about the problem:
    BCCode: 50
    BCP1: FFFFF88007F8B848
    BCP2: 0000000000000001
    BCP3: FFFFF88008D4E624
    BCP4: 0000000000000000
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1
    Device driver software was not successfully installed
    Base System device XDevice unplugged
    Base System device XDevice unplugged
    Base System device XDevice unplugged
    *Message in toshiba forum that there is a problem with Nvidia graphics - which I have up dated before, but as I keep being restored to earlier versions, the updates are all over the place, I update, machine blue screens updates gone? Update again......and so it goes on....*
    *Windows automatic updates is switched on, but everytime Windows does an update this machine crashes and has to install to an earlier time so Im back to square one.........*
    *It would be comical if this was a cheap machine!*

  • My 5c is blue screen and re starting and when the recharge restating ios 7.0.5

    My phone is 5c
    Operatin system ios7.0.5
    Blue screen and restating and when the recharge it restating outomaticaly

    This is not the support group to help with your problem.
    At the top of this page look for Apple Support Communities, click it and scroll down to look for iPhone groups

  • Latest itunes update 11.0.2 causes blue screen

    I have updated the itunes Software to the latest version (11.0.2) twice now.  Shortly after the update I get the blue screen.  The only way to remedy the situation is to restore the OS back to the point prior to the itunes update.  Everything works fine with version 11.0.1.12.  Any insights?

    Try just downloading and installing from the Support site - http://support.apple.com/kb/DL1614 - instead of the Mac App Store.
    Clinton

  • HT4623 I updated my ipad 3 with the ios7 update. Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes)  I can't get it to go away or to access my ipad.  Any hints?

    I updated my ipad 3 with the ios7 update.  Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes)  When I do this it wants to restore my ipad, which I have already done.  I can't get out of this screen.  Any hints on what to do next?

    Something went wrong with your update; you are in Recovery Mode.
    Follow step 1 to 6 closely to recover your iPad.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times

  • When I clicked on Firefox, the update bar started but when it stopped Firfox would not open. The blue screen of death popped up and said something about a new installation. We restarted the computer and now Firefox will not open. Help!

    When I clicked to open Firefox the update bar appeared and an update loaded. Usually when this happens Firefox will open up when the update is finished. This time it did not open. when I clicked on the icon again the blue screen opened and said something about a new installation and if this was the first time you have seen this screen restart your computer and try again. I restarted the computer and when I clicked on the Firefox icon the "hour glass" would appear like it was trying to open but it never would open. I don't know what else to do.

    See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

  • I use the latest Firefox 13.0.1. I'm using Windows 7. After a day I updated my Adobe Flash Player, suddenly it crashed and showed a blue screen. Please help me.

    My Firefox version is 13.0.1. I'm using Windows 7. Adobe Flash Player version is 11.3.300.265. A few minutes after opened the Firefox, suddenly it crashed and a blue screen showed up, it says there are unexpected error occured and forced my computer to be stopped. I need to restart the computer to see either it still show the blue screen or it just fine. After restarted, I use the Firefox once again, but this time, after about 30 minutes, it crashed again. The same blue screen showed up. As I expected, the new Adobe Flash Update crashes with the Firefox 13.0.1. Really need a solution here. Thank you.

    Hi,
    Blue screens usually indicate Windows system level problems involving device drivers like graphics card drivers, hardware errors (RAM, hard drive) etc. Malware may also cause this. Searching for the displayed error code would usually provide helpful pointers. The [http://answers.microsoft.com/en-us Windows forum] would also be helpful.

Maybe you are looking for

  • Iphone 6 Order Confusion

    I'm not sure what's going on with Verizon's ordering system. I ordered two Iphone 6 Plus on 9/19. When I returned from the weekend, I decided to call and check status, and I was told that there was only one phone on my order. They had to cancel that

  • Photo gallery from photoshop

    Will a web photo gallery produced in Photoshop work in a site produced with Dreamweaver ? It doesn't work for me so wondering if Photoshop and Dreamweaver are not compatible. Doug

  • Spool creation for each vendor/ payment document in program RFFOUS_C

    Hi experts, Requirement is to create spool for each vendor/payment document in RFFOUS_C. What is presently happening is only one spool is created for all the payment document numbers. I need to create separate spool for each cheque and remittance adv

  • A/v out

    Can I plug an audio video cable into the headphone jack of my curve and plug red yellow white rca hookup to my tv monitor like an ipod video out?

  • Tree query issue

    Good morning, Obviously, I simply do not understand the query that gets constructed to create a Tree structure in APEX. I have a Tree in Oracle Forms that works correctly. I cannot, however, seem to get it to port over to APEX. In my table (a table o