HT201343 i have a mid 2010 mac pro and the fact that it have most of the components as the ones compatible with the airplay mirroring mine does not work ?

i have verify that all the components are almost the same please advice why because i was able to previously airply movies why not now that i have the latest os x mountain lion

iTunes airplay still works as it always has.
AirPlay Mirroring (the ML-added feature) requires the latest Intel hardware (specifically the Intel HD Graphics subprocessor). This hardware includes a feature called QuickSync Video (similar to HDMI-over-wifi).
There is no 'almost' have it. Either you do or you do not. It wasn't an arbitrary decision by Apple to deny older Macs of this hardware feature.

Similar Messages

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

I have a mid 2010 Mac Pro that needs additional RAM.

My Mid-2010 MacPro (10.8.5) is running extremely slow . . . especially when I play on-line games. 1) Is there any easy way to determine what I might delete to free up some memory? 2) I have ordered additional memory from an outside source, but it won't be here until for several days. The only installation instructions I could find in the support pages were for a late 2010 MacPro. Does anyone know if the process is dfferent for a Mid-2010? Thank you for any help you might be able to provide.

MacBook Pro Notebook? _OR _
Mac Pro 65lb tower?

Does anyone have a PA271W, 2010 Mac Pro, and 5870 working via DisplayPort?

Hi All,
There are numerous threads about multi-monitor and resume-from-sleep issues with Mac Pro 2010 (5,1) and ATI 5870. There is also one thread in this forum with another user having problems with DisplayPort (henceforth, "DP") on his PA271W, but he has other issues that point to power supply or some other kind of problem.
My problem is that my brand new Mac Pro won't drive my PA271W at all with a mini-DP to DP cable. The same PA271W will drive fine from the secondary output of my iMac. The same PA271W will also work fine on the Mac Pro with DVI.
Apple sent me a replacement 5870 today, and it exhibits the same behavior. I'm trying to determine which of the following is the case:
a) 2010 MP, ATI 5870, and PA271W are an impossible combination that doesn't work.
b) My 2010 MP has some weird issue that makes the 5870 and PA271W not work.
Unfortunately, I don't have another DP monitor to swap the third variable. I've swapped the second variable courtesy Apple. I'd rather not swap the first variable until I absolutely know that's the problem, because it's a huge hassle to disassemble and reassemble another machine.
Anyone already have this exact configuration working okay?
Thanks,
Ben

To answer your question based on what I have seen and inferred so far:
a) I think there's some odd interaction b/w the PA271W, the 5870, and some diagnostic message the 5870 send to the logic board.
b) I don't think this is the case (alternatively ALL 2010 MPs are screwed up!). I was at the Apple store yesterday and tried both a 30" + dual-link miniDP adapter and a 24" miniDP monitors with no issues at all. There's clearly and issue between the PA271W and the 5870, I think.
My PA271W + miniDP/DP cable work fine on both a '09 mac mini and a '09 macbook pro 17". On the mac pro, I cannot boot with it's connected to the miniDP, but it works fine when connected to the DVI port. I can actually connect the PA271W to the miniDP after booting, and this actually works fine, but I'm not going to be doing this every time, too much of a pain.
One important clue (I think): If the mac pro is switched OFF and the PA271W is switched ON, the overcurrent LED light (right next to the CPU) will light up. What this indicates to me is not that there's a power issue (as I originally thought) but that somehow the 5870 is reporting to the mac that something really nasty is connected to it's miniDP connector, and that the mac should not boot.
A poster suggested I disable the DDC/IC on the PA271W. I have the impression this might work (will try tonight). Spectraview can use the USB port for communication with the monitor so I don't think this would be a problem.
Miguel

Hey guys I have a mid-2010 MacBook Pro and I am attempting to replace the Hard drive with an SSD and have run into an issue

So after installing the SSD, I tried rebooting into recovery mode and erasing it and was successful, I think at least. Now I am trying to reinstall Yosemite and everytime I go to do it, it says an error has occurred. Does anyone know what I am doing wrong or is there just a step that I am missing? Thanks

https://eshop.macsales.com/tech_center/index.cfm?page=HDDppcintelformat/HDDppcin telformat.html
Start up the macbook and hold down CMD+R. Then choose disk utility from the drop down menu. Partition the harddrive as you would normally using "MacOS Extended Journaled" GUID partition table. 1 partition or more (not current.)

Mid 2010 Mac Pro boot camp recognizing 1.86GB RAM

I have a mid 2010 Mac Pro w/ 6GB RAM and a dedicated video card. Win7 32-bit is boot camped on it. I know 32-bit Windows can only use 3.75GB of RAM. However, this Mac Pro is only seeing 1.86GB.
Since this is Win7, no boot.ini is available for /3GB switch and editbcd /set increaseuserva 3072 did nothing, even after clearing out the variable and resetting it to 3072.
I came across a post saying UEFI/BIOS for Mac Pros cannot see more than 1.86GB RAM in a Windows 32-bit environment. Is this true? It was only the one post and I forgot where I saw it. If not, how do I resolve this issue? If not, that's fine. I can format and install Win7 64-bit if needed. I want to confirm 64-bit Win7 will recognize more than 1.86GB of RAM. Any input?
Thank you.

64 bit Windows will see and use all your ram.

I can't get 5.1 Surround Sound running Windows 7, Mid-2010 Mac Pro

Hello,
So I'm running bootcamp on my Mid-2010 Mac Pro and I can't get Dolby Surround Sound to run from the Realtek HD Audio Manager. Is there a way to produce true Dolby 5.1? I understand this may be more bootcamp related than to the actual hardware itself but I figured this is the best place to start troubleshooting this.
Thanks

I can try-dunno how much help I'll be, though
go here for Realtek drivers for surround sound
http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=37&Level=5&Co nn=4&ProdID=144
try this: go to Windows Sound, then playback devices, then click on speakers icon (should have realtek as default). Click on that, and click configure
if realtek has a sound manager, try clicking on that, and a config dialog might appear
sorry can't be much more help than that
JB

Mid 2010 Mac Pro - Thunderbolt External Hard Drive

For Christmas my family gave me a 2T Little Big Disk thunderbolt external drive. I have a mid 2010 Mac Pro which doesn't have a thunderbolt port. Is there a PCI card I can use to connect the drive to my Mac Pro?

Those "adapters" are standard HBA. Like ATTO and others.
eSATA/USB
CalDigit FASTA-6GU3 2 port USB 3.0 & 2 Port eSATA 6Gb/s host adapter
PCIe Bus Extender
Sonnet Express Bus Extender PCIe 2.0
SAS/SATA
ATTO ExpressSAS H680 Adapter
ATTO ExpressSAS H6F0 Adapter
ATTO ExpressSAS H644 Adapter
ATTO ExpressSAS R680 RAID Adapter(2)
Firmtek Seritek/e6G 2 Port eSATA PCI Express (PCIe) Serial ATA Adapter
Newer Technology MAXPower eSATA 6G PCIe 2.0 Controller Card
Newer Technology MAXPower RAID mini-SAS 6G-1e1i Controller Card(3)
Newer Technology MAXPower RAID mini-SAS 6G-2e Controller Card(3)
Sonnet Tempo SATA 6Gb Pro 2-port
Sonnet Tempo SATA 6Gb Pro 4-port
Sonnet 6Gb/s SAS/SATA RAID Controller(2)

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

I have a mid 2010 macbook pro 15" and recently it started crashing so I took it to my local Apple store to have it looked into and they told me its a graphics card issue requiring the replacement of the logic board at a cost to me of $340.

I took my laptop to my local Apple store to have the problem diagnosed and they told me the problem lies in the grpahics card which will require the replacement of the entire logic board at a cost to me of $340.
after that I did some research on the topic and found that this was a massive problem on this model of macbook pro and Apple never issued a recall to fix the issue, are there any class action suits in this category currently underway? if so how can I join?

I also have a mid-2010 Macbook Pro 15". Also, I had paid $100 for Apple Developer account and I can't even use Xcode or Unity3D to work on my game because the moment I write a line of code, my computer crashes. Scratch that, I used to have an Apple Developer account (I let it expire a couple of weeks ago). It hasn't been of much use since my Macbook Pro crashes 15 times a day.\
A month after buying a mid-2010 Macbook Pro 15" directly from Apple, it began to crash. At first, I assumed it was my fault as I had been messing around with Bootcamp and doing other heavy stuff, but I quickly learned it would randomly decide to shutdown regardless of the task at hand. I was very busy at the time. I was a fledgling teacher in France, and I hardly had any time, or money, to put toward a 84 euro train ticket to Paris. Also, OS X updates were around the corner (Lion, Mountain Lion), so I held out, hoping the issue would be resolved with the updates.
During my investigation of the issue, I did find the TS4088 article. It recommended I install some updates, and then it described a problem that seemed similar to my own, but the order in which the problems occured, as described in the TS4088 article, did not follow the same pattern that my computer had been experiencing–there was no gray or black screen after the restart warning message when my mac crashed. The first time I found TS4088 on Apple's Support page (at a time when their product recalls were easier to locate before they redesigned their website), it was a couple of months after I had bought the computer. I reasoned that my Macbook Pro must not be suffering from the same issues as I had never seen the video freeze or go black before seeing a restart message. The restart warning message is the last thing I saw, no loss of video or black(or gray) screen afterwards. My computer would simply start to boot up again.
About two years after buying the computer, and suffering from about 3 GPU panics a day, I searched for the TS4088 article again, wondering if I had misread it, and that maybe the issues described in the article were the same issues I was experiencing. This time I could not find the TS4088 article on Apple's Website. I searched over and over again, but it was nowhere to be found. I assumed that issue had been resolved and the article removed. Now after three years of using a faulty, unreliable computer, I was feeling like a schmuck. I searched again on Apple's website to find the TS4088 article, or any new ones that outlined my very apparent GPU issues, but I had no luck. I circled Apple's website over and over and could not find that article. It was only through a link other frustrated mid-2010 Macbook Pro owners had posted on some other website that I found the link to TS4088, also learning that the forum's users were experiencing my same problems.
Based on the language Apple used to describe the problem, I did not reason that I was suffering the same issue. Here's what happens when my computer crashes:
     • The computer seems to shut down. The display turns off, the fans stop spinning
     • The message "Your computer was restarted because of a problem . . . Press any key to restart" is displayed.
     • I press any key, the computer restarts, I wait for next crash to interrupt my work
Excerpt from TS4088
"Symptoms
Apple has determined that a small number of MacBook Pro (15-inch, Mid 2010) computers may intermittently freeze or stop displaying video on the built-in display or on an external display connected to the MacBook Pro. In this situation, you may also see a restart warning message before the video is lost or the display turns black or gray."
My computer never displays a restart message before the video is lost or display turns black. My Macbook Pro mid 2010 loses the picture on the display, and less than a second after that is the restart warning displayed. The video would never freeze or stop playing, rather the whole computer just dumped all of its processes and displayed a warning message asking me to press any key to restart.
My issues with this problem are the following:
•The problems described in TS4088 do not accurately reflect what users are experiencing. TS4088 is misleading in this respect.
•The article TS4088 was not easy to find on Apple's website. It seemed to have moved to an obscure, impossible-to-find location that could only be found thanks to the great number of other Mac users who are experiencing the same problem.
This issue hasn't been managed dutifully. I'm annoyed to have sunk money into a developer account. I'm annoyed that I sunk money into an expensive product that does not work. I'm annoyed that the description of the issue afflicting mid 2010 Macbook Pros was inaccurately and misleadingly described and that links to the TS4088 article disappeared from Apple's website when I could have truly benefitted from them. I am especially annoyed that my life in graphic design, web development, and iOS development has stagnated for several months as my computer crashes some 15 times a day. I am, however, pleased with the speed at which a Mac can boot up.

10.7.3 USB Lockup on mid-2010 Mac Pro

Hello,
I updated my mid-2010 Mac Pro to update 10.7.3 this morning. Since then, I have had three occasions today, each one worse than the previous, where all USB devices connected just locked up completely and were totally unresponsive.
This includes my keyboard, mouse, and video camera. Those are the only devices that are connected to this computer.
One at a time I have tried disconnecting and reconnecting each device with no success. Interestingly on a couple of occasions, my keyboard would stop working but the mouse daisy chained out of the keyboard worked without any issues.
The most recent incident absolutely everything locked up and the only option I had was to do a hard reset of the computer. When I logged back in I quickly enabled the Bluetooth support and grabbed my wireless keyboard and mouse so that I can work.
Has anyone else encountered this yet? I know there aren't that many Mac Pro users any more.
In the meantime, Time Machine is performing a full backup and I think I will downgrade back to 10.7.2.
I wish I could go back to 10.6.8 but since this Mac Pro shipped with 10.7.2, it will not accept an earlier version of OS X. :-(

Wow, Same issue here on my Early 2008 Mac Pro. After 10.7.3 update, my USB ports have been behaving erratically. The problem actually seems to be getting progressively worse too.
From what Ive gathered so fat, it seems almost as if the ports are now underpowered. Plugging a keyboard directly into the USB port seems to work indefinitely. As soon as I add other devices to same port, the new device won't work.
My first assumption was that my USB hub was shot, but then I tried the ports on the back of my Cinema Display and they were all jacked up too.
I tried plugging another keyboard directly into the front USB port but That didn't work either, as it seems there was no power for it due to the other devices plugged into the back. I unplugged everything but the front keyboard and it still didn't work until I restarted it.
Extremely hard to troubleshoot how this issue is behaving. Like I said, erratic is probably best description.
This is the worst bug I've personally experienced after an update to an OS since I've been using Macs on System 7.
I really hope Apple fixes this ASAP.

Mid 2010 Mac Pro 10.6.4 Does Not Log In

This is both a MacPro question and an Avid ProTools question...first I need to get the Mac working again and then come up with a longer term ProTool solution....
I am at a new job where I am currently running ProTools 8 using a Digidesign 003 on a Mid 2010 Mac Pro running OS 10.6.4. There are two user accounts, and only one (the adminsitrator account) is marginally functional. It runs extremely slowly (five minutes to launch GarageBand) and the application icons in the dock do not display correctly. When attempting to log into the other account, after a few minutes a blue screen comes up and then it returns back to the log in screen.
I know that the computer would be compatabile with Mavericks OS 10.9, but I know that 10.9 is not reccomended for any Avid Product (even newer versions of ProTools).
How can I make the computer operational while still running OS 10.6? Do I need to upgrade to a newer OS and take on the expense of upgrading to a newer version of ProTools? What about compatability with the 003?

it shipped with an OEM DVD of special build of 10.6.4 but you really need 10.6.8+ at least, or 10.8.5. Depends on if your apps still rely on older PowerPC and Rosetta.
Software Update would have to be turned off it you are not already on 10.6.8 plus all the security updates and new Safari update and others.
I like to have a safety net, clone your system, take the clone off line, then make updates and changes. And have two such backup working clone systems handy. In some cases you can just partition one drive to do that.
Sounds like other issues. Invest in a 250GB or 500GB SSD for t he system. PCIe SSD card and SSD(s) for scratch and media libraries.
Make sure it has 24-48GB RAM.
ATI 5770 drivers really need 10.6.8.

Best Video card for Mid 2010 Mac Pro

I'm currently running a Mid 2010 Mac Pro with a 5870 video card in it. I feel that it's bottlenecking processes, and want to upgrade it. I'm not looking to upgrade the computer itself, but want to get the fastest video card that I can.
Looking for suggestions, and links if possible to what you know works.
Thanks!

Why do you a) need a "fast" video card, and b) think it is the bottleneck (it might)?
Maybe you need dual AMD's and a 2nd 5870 (with the addition of 2nd 450W PSU to drive it).
This: July 25th, 2014 -- GeForce GTX 780 6G: Mac Pro Tower 'Sweet Spot'?
Do you have some SSDs for system and scratch? that often is where you can attack a bottleneck and improve performance.
Graphics can need as much RAM as possible. Dual or single cpu? many are choosing to install one or two faster cpus of the 3.4GHz variety to help.

I have a mid 2010 Macbook Pro, How can I install Windows 7 without an Optical Drive?

For clarity: I have a mid 2010, Macbook Pro. I recently decided to upgrade to a Crucial SSD drive, double the ram (8 gigs), and remove the optical drive in favor of using my old drive as a back up. I am also currently running Yosemite.
I want to install Windows 7 onto my SSD, using bootcamp. Unfortunately I no longer have an optical drive installed, which makes things difficult as Bootcamp does not even give me the option to create a bootable USB.
Now, this is where things get kinda fuzzy:
MId 2010 macbooks use EFI, and are quite capable of booting from USB. How do I know? Because I booted from a USB drive in order to do a fresh install of Yosemite on my SSD.
I have read mutliple forums and threads with claims that folks have had no problems doing this on 2008 Macbook Pros running Snow Leopard. However, what seemed to be required was some clever .plist modding. I have used both text wrangler, and x-code to do this, unfortunately upon booting of bootcamp, bootcamp instantly crashes. Naturally, I can restore bootcamp because I made backups of the .plist file.
It would seem that modffying the .plist file assumes that the option to create a bootable USB device is grayed out. In my case, it is non existent.
I have also read that folks have had success using rEFIt, however rEFIt has been forked to rEFIned, and the developer of rEFIned made mention on his site that Yosemite handles booting differently than previous versions of OSX.
WIth that, I was hoping that some kind person could explain to me whats going on, what I am missing, and what I can do to make this happen just shy of tearing down my MBP and reisntalling the Optical Drive and dusting off my Win 7 disc.
Also, my Model Number/Bootrom is MBP 6,2.
Thanks in advance!

Thank you for your reply, and the information. This is what I came up with:
I added the strings as instructed, however when I went to sign the script in terminal, I was told:
/Applications/Utilities/Boot Camp Assistant.app: replacing existing signature
/Applications/Utilities/Boot Camp Assistant.app: code object is not signed at all
In subcomponent: /Applications/Utilities/Boot Camp Assistant.app/Contents/info.plist
Also, here are screen captures of the lines that I added. Mine are the top string entries:
Thank you for your help, thus far!

Full backup ( ~ 1 TB ) using external HD - speed USB vs. Firewire vs. eSATA - what are relative speeds - how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)_

    Hi All,
     I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
     What are relative speeds of USB vs. Firewire vs. eSATA ?
     I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Thanks

Jim Bogy wrote:
...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals.

HT201343 i have a mid 2010 mac pro and the fact that it have most of the components as the ones compatible with the airplay mirroring mine does not work ?

Similar Messages

Maybe you are looking for