HT201359 Gun Bros 2, Buck Pack C is error i bought a lot of credit but not have got a money in this game . Could i refund all that i bought it????
Gun Bros 2, Buck Pack C is error i bought a lot of credit but not have got a money in this game . Could i refund all that i bought it????
i want to buy only one(19dollars) cause it errored bought 7times. so i need money back right now
Best regards,
You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Similar Messages
-
Issue: experienced when attempting to uninstall the App-V 5.0 SP2 RDS client.
Event Log: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder
path 'C:' contains an invalid character
Symptoms (when in this current state):
Unable to uninstall the SP2 client
You can upgrade the client (via hotfix) and uninstall the hotfix, but you will not be able to remove the SP2 client
AppvVfs filter driver will not create an instance, therefore applications will not be able to read into existing streamed VFS content, or trigger sparse files to stream content. (you can still stream the content via other means, like the UI or powershell)
Because of the AppvVfs filter driver not instantiating, applications that depend on licences that exist in VFS will not be able to be read causing certain applications to react as if the license does not exist or is an incorrect formatResolution:
Check for the existence of a hidden folder named %appdata% in the C:\Program Files\Microsoft Application Virtualization\Client folder. (You will need to un-check the folder options box in windows explorer for "Hide
protected operating system files" to see it)
If the hidden %appdata% folder exists, delete it.
Proceed to uninstall the App-V client
After a clean uninstall and removal of remnants of the client, reinstall the client again and apply the latest hotfix available (Hotfix 2 for SP2 at a minimum). -
HT203167 GUN BROS app is a rip off!! and i would like my money or purchases reinstated
after purchasing power ups in app GUN BROS the app updated itself back to the original and i lost all my purchases which means i was pretty much robbed
Yes, you’ll need to upgrade to the latest version of iPhoto for $15. That is the only solution. You can read here if you wish: http://www.macworld.com/article/160380/2011/06/icloud_what_you_need_to_know.html
-
My hard drive had to be recently reinstalled (5 days ago) with the software being 100% totally new, and totally up to date.
I therefore do not have iwork 09 which was purchased as a family pack (via download). How can I download it again without purchasing, and reactivate iwork09? It does not show up in my App store under purchases, as it was purchased a few years ago.It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to put everything back.
You can transfer itunes purchases fom an iphone: Without syncing : File Transfer Purchases
or you can redownload them. Open itunes store, click Purchased, under Quick Links. -
Packing using WS_DELIVERY_UPDATE Error
Hi Experts,
I've been browsing the forums, and, despite the many examples available I can't put this FM(WS_DELIVERY_UPDATE) to work.
I want to do Packing of outbound Delivery using VL02N.I am using below Code ,But it's not Working.
it's not giving any error (Sy-subrc 0 & i_prot is empty )but it's not create any HU or Updating Delivery Document no.I also tried some BAPI for Create HU but still not woring.
->BAPI_HU_CREATE
->BAPI_HU_PACK
DATA:
wa_vbkok TYPE vbkok,
wa_hus TYPE TABLE OF vekpvb,
wa_pack TYPE REPACK_HU_WM OCCURS 0 WITH HEADER LINE,
i_prot LIKE STANDARD TABLE OF prott WITH HEADER LINE.
data : VERKO type VERKO occurs 0 with header line.
wa_vbkok-vbeln = pvbeln.
wa_vbkok-vbeln_vl = pvbeln.
**wa_pack-desthu = exidv.
wa_pack-quantity = pqty.
wa_pack-meins = pmeins.
wa_pack-matnr = pmatnr.
**wa_pack-charg = pcharg.
wa_pack-werks = pwerks.
wa_pack-lgort = plgort.
wa_pack-vbeln_vl = pvbeln.
wa_pack-posnr_vl = pposnr.
wa_pack-object = '01'.
wa_pack-objkey = pvbeln.
APPEND wa_pack.
CALL FUNCTION 'WS_DELIVERY_UPDATE'
EXPORTING
VBKOK_WA = wa_vbkok
SYNCHRON = 'X'
COMMIT = 'X'
DELIVERY = wa_vbkok-vbeln
TABLES
prot = i_prot
VERKO_TAB = VERKO
IT_PACKING = wa_pack
ET_CREATED_HUS = wa_hus
EXCEPTIONS
ERROR_MESSAGE = 1
OTHERS = 2.
COMMIT WORK AND WAIT.
Thanks,
Nehal.The BAPIs for HU create/change work when HU management is switched on in your system. I had a similar requirement where packing was required without HU management. I got it working using Fm -BAPI_OUTB_DELIVERY_CONFIRM_DEC. Below is relevant code.
ls_headerdata-deliv_numb = lv_delivery.
ls_control-deliv_numb = lv_delivery.
ls_bapidlvhdunhdr-hdl_unit_exid = <fs_hdunhdr>-hdl_unit_exid.
ls_bapidlvhdunhdr-hdl_unit_exid_ty = 'F'. "External identifier
ls_bapidlvhdunhdr-plant = <fs_hdunhdr>-plant.
ls_bapidlvhdunhdr-ship_mat = <fs_hdunhdr>-ship_mat.
ls_bapidlvhdunhdr-sh_mat_typ = <fs_hdunhdr>-sh_mat_typ.
append ls_bapidlvhdunhdr to lt_hdunhdr.
ls_bapidlvhdunitm-hdl_unit_exid_into = <fs_hdunitm>-hdl_unit_exid_into.
ls_bapidlvhdunitm-batch = <fs_hdunitm>-batch.
ls_bapidlvhdunitm-pack_qty = <fs_hdunitm>-pack_qty_base.
ls_bapidlvhdunitm-deliv_item = <fs_hdunitm>-deliv_item.
ls_bapidlvhdunitm-deliv_numb = iv_delivery.
append ls_bapidlvhdunitm to lt_hdunitm.
call function 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
exporting
header_data = ls_headerdata
header_control = ls_control
delivery = lv_delivery
tables
item_data = lt_bapiobdlvitemcon
item_control = lt_bapiobdlvitemctrlcon
item_data_spl = lt_bapiobdlvitemdataspl
handling_unit_header = lt_hdunhdr
handling_unit_item = lt_hdunitm
return = lt_return.
I hope it helps. -
Live cam sync detected by Win XP but not detect by "Live! Cam Sync (VF0520) Starter Pack"
When I connect cam to my USB port It is detected by the system and working properly when running from My computer(USB Image Device #2). But when I am installing the software "Creative Live! Cam Sync (VF0520) Starter Pack 2.00.18" then it says "Setup is unable to detect a supported product on your system".
When I connect the cam first time to the system It create instance (USB Image Device) in my computer and works fine and software was also installed to the system.Then I ran my software it shows parental control image and did not detect any image then I plug-out cam from the usb port and then plug-into different usb port the new instance(USB image Device #2) after this software not detect the camera. I uninstall the software then I trying to reinstall again but It not detect the camera and shows error "Setup is unable to detect a supported product on your system" while my cam is attached to the usb port.
Hope you understand my problem. Thanks in advance.
I used Windows XP professional service pack 2buddy, sorry but i have bad news for u .... i had the same problem .... i contacted the customer support and they kept tossing me around between tham asking me to do this and that and the other thing and none of them worked .... ok .... i had to exchange the cam from where i bought it .... the replacement workd for two days .... and then broke off again the same way the first one did .... its cheaply manufactured cam is what it is all about .... i contacted them again .... anyway the last email they sent me saying that they had escalated the problem for more investigation and i did not hear anything from them till now .... and by the way it doesnt matter what operating system u r using .... i used on windows 7 and xp sp3
-
In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter. That's also done in Get Info for the file or folder concerned.
Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914 -
HT4098 Purchased upgrade pack in Tiger Woods PGA Tour 2012 but not upgraded
Purchased upgrade pack in Tiger Woods PGA Tour 2012 Apple have taken my money but no upgrade received, this appears to be a common problem, anyone know how to get money refunded or upgrade?
Contact iTunes support, and the app developer.
iOS: Troubleshooting applications purchased from the App Store -
Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I own ipad mini. I am able to add music or apps to my library but not just videos. I have already tried removing & reinstalling it. I also have tried with various formats like MPEG, MOV, MP4. Please help.
I already have what you ( ClayandLonnie ) have suggested with the preferences>Shareing Preferences set to share all.
I have tried turing it off, and then back on.
I have tried just sharing specific items and this still did not work.
I am going to try stepping back down to 11.04.4 as previously suggested by TheDarkCanuck when I get home tomorrow. (maybe saturday). I am just leary about having to recreate all my libraries and how long that might take. I have over 1.5 TB of Music and Video, that is why I would like to get it working in the current version.
Just because I don't have a Mac, it seems that this is not being taken as a real problem for the windows 7 users (maybe it is specific to 64bit). I may try the 32bit version to see if that fixes it first. Unless someone else has, and want to chime in. -
Hello,
I am using Xcelsius 2008 and I am having 2 problems here.
1st problem, I have tried to install the Service Pack 3.
After I install it, whenever I add a new Data Connection, the right screen (where it was supposed to be the data connection seetings) I got a blank screen which does not allow me to setup any data connection.
2nd problem, after I got this bug, I have tried to install the Fix Pack 3.1. And then comes the new problem, I got an error during the files extraction:
"CRC failed in package\XcelsiusPresent.msp
the file "???" header is corrupt"
Can anybody help me with these issues?
Regards,
FabioI have experienced exactly same issue - This issue is with Xcelsius Present but not with Xcelsius Enterprise. So I have uninstalled Xcelsius Present and have installed Xcelsius Enterprise SP3 and Fixpack 3.1
-
Where can i download jam pack 4 (orchestral sounds) for garageband 6.0.5. please. I have an air book maverick OSX 10.9.4. Thanks
This JamPack is no longer sold separately by Apple. You could search for the boxed retail version of the JamPack at eBay or Amazon.
But it is much more economic to install MainStage 3 instead. You can buy it at the Mac App Store. MainStage 3 will install all five JamPacks for a price much less than the price of a single JamPack used to be. Afterwards the JamPacks will work with Logic and GarageBAnd as well.
Just launch MainStage after installing and use the command "MainStage > Download additional content" and select the JamPacks you want to install. -
Dear friends,
I want to transfer files between my windows XP computer and my Ipad4. I am not able to install itunes on my computer because it does not have service pack 3. What can be done? Please help?Have you tried installing Service Pack 3 ? You should be able to try installing it via Windows Update in the windows start menu
-
When i try to buy 50k Coins in Jet Pack Joyride (3.99$) it says "Error al comprar" (Im from Costa Rica but my account is from USA) IDK what to do plz help me.
Hello Dovahkiin03,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iTunes Store: About In-App Purchases
http://support.apple.com/kb/ht4009
Best of luck,
Mario -
Hello sir, Hello sir. Plz clarify me... My frnd have iphone 5s sealed pack. He purchased it from uk..he told me the phone is unlocked..but i have doubt phone is locked or unlocked..plz help me how can i know phn is locked or unlock???
hellow sir i have iphone 3gs but its unofficely unlock .
can i update my iphone ? -
I do a fair amount of audio, video editing and photoshop, but I have a limited budget. What's going to give the best bang-for-buck for the next 3-5 yrs? My current machine is a 13" Macbook unibody 2.4 Core 2 Duo w/ 4Gb Ram so it's time to move forward with more power and screen real estate!
Hello, Jeff
I could never edit on a 13" screen. I'm currently using a 17" MBP i7 Early 2011 as a fast replacement to my aged 20" Intel iMac.
Both systems are not that far apart on stats and you will find that processing HD video will rely highly on the read/write to your storage. Myself, I'd be eye balling the 2011 for the Thunderbolt port so HD Video export/compression doesn't take forever! Currently processing a finished HD project for DVD uses at most 20% of my total CPU capacity. The FW800 drive is the big bottleneck! (I know I need at least a RAID to see a real speed boost).
How good your eyes are and your usage style would dictate if the difference in screen size make a difference to you.
Maybe you are looking for
-
I'm having these weird problems with newlines. I'm sending \n in a message because I have a multi lined message i want parsed. Axis is receiving the message and throwing exceptions. I printed out the line it's parsing and it's giving this error that
-
Message.saver is not working under 10.6 - anybody know of an alternative?
Message.saver 1.5.2 (http://www.apple.com/downloads/macosx/icons_screensavers/message.html ) is not working under 10.6. It is a screensaver that allows you to put a text on the screen as the saver kicks in. IMHO a excellent piece of software that wor
-
SQL Server dragging of tables to worksheet is not working again in V3.2
V3.2 the SQL Server drag of tables is not working again. It says Query Builder is not Supporte for this connection type. Query Builder disabled.
-
How to create Linked Partition?
I have to implement linked partitioning; Does it require any users to be created in shared services for it. Please give a brief answer......... Urgent!!!!!!
-
my native language is Bengali, now requirement is we have to show some reports and forms in Bengali, we know that SAP does not support Bengali, so question is can i show my report in Bengali, if i want to do that what i have to do then. i try to uplo