HT2250 I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?

I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?
paul.kelly

Hi Steve,
No expert, but since nobody else has piped in...
Did you setup the DNS Server IP?

Similar Messages

I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

"The reply" as in the Rescue email to reset your Security Questions? If so, then you will have to contact iTunes Support directly to get them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

When I use Firefox to monitor changes I do to HTML files locally, it does not show changes to images unless I restart the browser. Is this a bug?

I have the local and the remote versions of a page open in two tabs. I change one of the images (keeping the same name in the HTML) and upload the changed image. The tab that shows the remote page only takes a refresh to show the change. The tab showing the local page not. I have tried opening it in a new window but it still does not change. Only if I restart Firefox does it show the change. Why? Is this a bug?

grantheaslip's suggestion doesn't work for me; no change at all. (Thanks anyway.) Any other ideas? Is there another way to "hard" refresh? I don't see anything in the menu.
Also, it seems like this is a very recent problem. I thought in the past that a regular refresh did the job.

I seem to have an account set up in iCloud, but when I sign it, it does not show all of my content. It only shows a few of my apps, photo stream is missing How do I view everygthing on my iphone and ipad ?

My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.

deltajane wrote:
My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
This is the article that will assist with this part of your post:
http://support.apple.com/kb/ht4486
deltajane wrote:
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
deltajane wrote:
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

HT201301 Pages does not show up as an app that supports file sharing in my iTunes. Why??????

I just downloaded Pages & Open Word onto my iPad because I want to be able to load my recipes from my iMac onto my iPad to use in my kitchen. When I try to use iTunes to transfer the files, neither app shows up as working with file sharing. What am I doing wrong? What app can I use to get these files from my desktop to my iPad?

I have Pages and file sharing is file sharing so step by step....
Connect the iPad to your Mac
Launch iTunes.
Click on your iPad name under the devices heading on the left sidebar of iTunes. If you are using iTunes 11 and don't see the sidebar go to View>Show sidebar.
Click on the Apps Tab at the top of the iTunes window on the right.
Scroll down to File Sharing Apps
Do you see Pages in that list of Apps?
If you do - click on it.
Now drag any of your Pages files from the desktop into the file sharing window on the right.
Launch Pages on the iPad.
In thumbnail view - Tap the + sign in the the upper left corner
From the popup window select - Copy from iTunes.
From the next window - select the file that you just dragged into the file sharing window.

Firefox does not show photos in incoming email that show in IE

I receive an email to my gmail address that contains embedded photos. The text is displayed but not the photos. Accessing the same email with Internet Explorer shows all the photos

See:
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Made a UD to 'Scrap'. But Stock Category is "Q" and does not show in MMBE "Blocked"..WHY?

Hi,
I made a UD of an Insp Lot to 'Scrap' in the Inspection lot stock tab.
The system automatically created a material document with movement type 553 (Direction -) and 551 (Direction +)
However the stock Category in the material document is "Q". IS THIS CORRECT? SHOULD THIS BE "S" (This is in the WM tab of the material document).
Also when I query MMBE after the above UD to Scrap, the batch quantity is not shown either in Quality or Blocked stock. IS THIS CORRECT?
Please advise.
Regards
Priyanka

My understanding was when I input a quantity in 'Scrap' field during UD
1) The stock should be blocked (hence it will show under blocked stock column in MMBE)
2) The stock category should be "S" and not "Q"
I agree that in MMBE based on your explanation the stock should not be shown in blocked.
But can you explain why the stock category is "Q" instead of "S"
Regards
Priyanka

How to install software that does not show in add\remove?

I have a agent that i need to install on all our computers but the program does not show in add\remove when installed correctly.
It does however have a service that runs and some processes that run.
Can someone tell me what the best way of installing this is?
Should I create a collection based of the Service\Process or even based of the file sitting in C:\Program Files.
I wanted to create a collection of computers that had the software already then create another collection that had all computers with it missing and create a advertisement from this..
I am just not sure how to do this one when it does not show in add\remove

Please create the new SCCM query based collection for computers which have required software installed. We can create this collection based on service.
For example :Below SCCM query will add the computers which firewall service is in disabled mode.
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SERVICE on SMS_G_System_SERVICE.ResourceId =
SMS_R_System.ResourceId where SMS_G_System_SERVICE.Name like "MpsSvc" and SMS_G_System_SERVICE.StartMode like "Disabled"
Create another collection for computers which have software not installed and add the below query for the collection. Replace the "CollectionID" with collectionID of first collection.
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where ResourceID not in (select ResourceID from SMS_FullCollectionMembership
where CollectionID = "CollectionID")

TS1363 my iphone does not show up in itunes for me to sync

My iPhone 5 does not show up in iTunes so that I can sync it. I have Windows 8.1.

Try this
Go into the control panel, programs, add/remove programs
Uninstall iTunes, Apple Mobile Device Service, Apple Application supprt
Then go to apple.com and redownload iTunes and reinstall it and try again.
It shouldn't affect your content at all (didn't mine) but may help with iTunes seeing your device.

Sh arp does not show mac address of IP --- ASA

Hi Everyone,
I can ping the IP from the ASA but when i do sh arp it does not show me mac address od that IP.
Need to know the reason behind this.
Regards
MAhesh

So your ASA should have a route on the inside interface to internal networks. The address of that next hop in the routing table is the one you should have in your arp table allowing you to reach non-directly-connected (subnet-wise) hosts within the scope of that route statement.
Think through the logic - ASA pings a host. It needs to determine proper egress interface. It checks and asks "Is it reachable via a directly connected interface (most preferred route)?" Answer no. "Do I have a route statement telling me how to get to it?" Answer yes (otherwise use default). OK - so ASA sends packet out egress interface defined in that route statement to the next hop as defined in route statement and waits for reply.

My homepage does not show the latest page when I open Firefox

I have set MSN as my homepage but when I open Firefox it does not show the latest MSN page.

'''''Has the site worked normally in Firefox before?'''''
When you have a new problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
This will open a window listing the site's cookies, which you can remove individually.
Then try reloading the page and logging back in. Does that help?

Hp 15-r033tx laptop does not show the Nvidia chipset information and only uses Intel HD graphics

My Hp 15 r033tx laptop has windows 8 64 bit installed in it and as it comes with NVidia Ge Force 820 M 2GB graphics card , I have also installed Nvidia and Intel HD Graphic Drivers but in the dxdiag selection it does not list the Nvidia Chipset and information but only lists Intel HD Graphics with 1786 MB.
Also it does not show any Dedicated Video Ram that is normally showing in my other friends desktop with Nvidia Graphics properly installed
Any solutions?

Hi @Suraj2410 ,
Thank you for your inquiry, I will do my best to help.
I see that you have Windows 8 installed and are not seeing your switchable graphics.
When I checked the specification page I see it came with Free Dos. When I checked for support drivers they are listed for Windows 7 and Windows 8.1.
HP 15-r033tx Notebook PC specifications
HP 15-r033tx Notebook PC Drivers
Here are three document to assist you with overcoming this difficulty.
Resolving Video and Graphics Issues
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
If you are still having difficulties, with it being a recent purchase, I suggest contacting HP support for assistance.
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Rated song in my iphone/ipad does not show in itune

hello
i had rated som song as one star in my iphone, so when i connect to itunes, the rating should show, [when i select the music of my iphone in itunes]
i used to have it in old release but now i dont know why does not show .
i even made smart list when all music with one star will go to the list
but i can see the list in iphone but not in itunes when i connect it, [smart List is empty].
can please someone tell me why ??!!!
i manage my music manually, i dont like to sync. [it work before so am sure there is a way]
so please tell me how to get the rating when i connect my iphone .

Hi Lyssa,
Thank you for the suggestion. I managed to find the iPhone device on the iMac under "shared" rather than "devices". It works great.
Thanks again,
George

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors:                     0 Average
Open                  904 Maximum
Successfully Completed         0 Minimum
Overall:                  904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

HT201335 Airplay does not show on device connected to AppleTV

I have an iPad with iOS v7.1 My AppleTV shows up as a device on my iPad to mirror but when I select it it does not show up on the screeen. Any suggestions?

Hi jwhausk,
If you are having issues with Airplay or Airplay Mirroring between your iPad and your Apple TV, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Regards,
- Brenden

HT2250 I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?

Similar Messages

Maybe you are looking for