HT2486 I am unable to print envelope addresses from address book

can get my card (return address) to print, but not address

HI I hope you are doing well and welcome to the forum;
What applcation are you using to print from the Tablet Are you using this App Go here This will work when both devices (Printer and tablet are in the same network e.g. your homenetwork assuming that you only have 1 router)
If the printer shows online folllow this article in the HP support page click here 
try this is the printer is showing offline and is not printing. from the home computer you mentioned Win 7.
Hope this helps;
RobertoR 
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

  • Unable to print Remarks field from InBank book & Cash Book Reports

    Hi,
    for this bankbook and cashbook reports, we are using Financial Reports-> Accounting -> General Ledger
    in this General Ledger Interface, "BP and Accounts" are two types. For both of modes, i am using same PLD Report.
    I draged the Outgoing payment Remarks  and Incoming Payment remarks  on the Report, but i am unable to see the Remarks data on the report. when i drag the "Journal Remarks" field it is displaying on the report.
    -How to bring the "Outgoing Payment and Incoming Payment Remarks " in General Ledger (Bank book & Cash Book)
    - for bank book and cash book,   General Ledger is the right Report or any other?
    plz hep me asap. urgent.
    Regards,
    Nagababu

    I don't think you would be able to add Outgoing payment Remarks and Incoming Payment Remarks to this template. They are neither available for display nor is the OVPM or ORCT tables available to be added as a table to the PLD.
    Suda

  • Unable to print envelopes with latest HP driver for LaserJet 4

    In April I downloaded the latest HP drivers for my HP LaserJet 4 to reinstall following work on my computer.
    First I was just unable to print envelopes.
    I redownloaded and had same results
    I have uninstalled and re-installed a number of times.
    I tried a "chat" with HP that went nowhere.
    I was on hold for over an hour last night -- only to be told that I should email a request for assistance. Fat Chance! Try it!
    I still have the manual from when it was new. It had no answer except a Customer Service phone number which has long been shut down.
    The present condition is that I am unable to print anything.
    Customer Service is a sick myth.

    Hello, DP Photo, sounds like a scanning issue with the software. To start I want you to completely remove the software and then reinstall the programming from the packages available on the website I am going to link you to below. Use the full-feature software if available. 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3974279
    Try that and let me know how it goes! 
    -Spencer 
    PS I hope you are having a wonderful day! 

  • When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto.  All other print requests show the normal pinter menu. How do get the normal menu?

    When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto.  All other print requests show the normal pinter menu. How do get the normal print menu?

    Mike,
    Are any of your other applications going wonky, or is it just Logic?
    I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer.  Then I would launch Logic and see if the problem has been corrected.  It's amazing how much these two steps can accomplish.
    If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

  • I am unable to print color photos from i photo using a Brother Printer

    I am unable to print color photos from i photo using a Brother MFC-6490CW all in one.  The photos appear to be in grayscale.  I have checked the printer settings, but for some reason I am not able to access the color management on my printer from printer set up.  It only gives me the standard option.  I have spent hours checking Bother's website and Apple's and I am not able to come up with a valid answer.  I know that the color print works.  If I print something from the internet of from outlook it will print in color.  I know all of my cartridges are in working order, I have cleaned the print head on my Brother, but I am still not able to print photos in color!!!
    What puzzles me the most is why I am unable to really access the color management menu on my printer?  It just does not come up.  I have the option from paper handling to print photos, but this has nothing to do with the quality.  I have also tried printing the photo from an Adobe PDF file and I still have the same problem.  Can anyone point me in the right direction?  Thank you.

    In the Print dialogue box click on the little triangle to the right of the name of the printer. That will expand the dialogue box.

  • I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected

    I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected - I have uploaded the latest version of Adobe with no luck and have never had this issue before !

    Hi bengaunt ,
    Thank you for posting on the Adobe forums, you can try printing as an image.
    Open the file>Print>advanced>check the box "print as an image" OK
    Thanks,
    Vikrantt Singh

  • Unable to print to pdf from any of my applications

    Hello,
    I am running Acrobat 8.0 on windows 7. Toshiba Qosmio 64 bit. I am unable to print to pdf from any of my applications. Office, Mozilla, Lotus 1-2-3 and others. When I choose the print option. And from the drop down menu choose Adobe PDF as the printer. And when I click to continue I get the little metered bar showing it's working, but then I get an error in the printer que. I don't even get an option what to save it as or where to save it to. It just goes straight to the metered bar showing its working. And it does this for all my programs where I can print to pdf. Can anyone help me? Also, this is a student version. Could the student version be unable to do this?
    Thank you,
    JimmyJoney

    Although Acrobat 8 is not supported on Win 7, you can try a few things. First, apply all updates to Acrobat 8. If this doesn't help, check to make sure that the PDF port was created. If not, you can try:
    Open Control Panel, select Printers
    * Click Add a Printer
    * Click Add a local printer
    * Select Use an existing port (should be preselected), change the port to "Desktop \*.pdf (Adobe PDF Port), click Next
    * On the next page, click Have Disk...
    * Click Browse and browse to C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF (or wherever you have Acrobat installed), click OK.
    * It should now show a series of "Adobe PDF Converter" entries. Select the first one and click Next
    * Change the printer name if desired, uncheck the box to use it as a default printer, click Next
    * Do not print a test page, click Finish
    * Find your new printer in Printers. Right click on it and select Properties, Advanced
    * Click "Print directly to the printer", click OK
    These last steps are detailed in the following discussion.

  • Unable to print to pdf from a pdf

    We're having a issue where we're unable to print to pdf from a pdf with acrobat 9 std, so far a 64bit machine. We get the following errors
    "the document could not be printed"
    "there were no pages selected to print"
    We see the issue with all pdfs. Acrobat 7 std works fine, as does printing to pdf from other applications with 9 std. So far it only effects acrobat 9 std. We've repaired the installation and updated to the latest. We do have however only see this with one machine, but we haven't looked past this one machine yet...Any ideas?
    thanks all,
    cg

    XP pro 64bit. Just updated to 9.3.3, still have the error being thrown.
    The user fills in a form from our intranet and then prints it with the adobe printer creating the illusion that its write protected. I'm not one to stop them, given the forms are low value and all. Possibly if the process is uncomplicated (that's key here) then saving the document to the desktop and making the change and write protecting it there before transmittal might be an alternative, as long as it doesn't rely on passwords and keys...
    Sorry I'm an adobe noob.
    thanks,
    cg

  • Unable to print pdf files from sites

    I am unable to print pdf files from any website.  Suspect an incorrect setting; but, not sure how to correct it.

    Back up all data.
    In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
    /Library/Internet Plug-ins
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • I'm unable to print pdf files from certain web sites. I have just changed to Mavericks

    i'm unable to print pdf file from certain web site. I just changed over to Mavericks.

    You will need to access that PDF on your computer first, before you can print it — unless that PDF is corrupted, which occasionally happens. Your printer needs to be configured and working.
    Default PDF web-browser plug-in in Safari, latest (Firefox/Chrome) also built-in.
    Click on the remote PDF link to open in browser
    On Mavericks, you will need to click through security challenges for the PDF
    File menu > Print
    Right-click on remote PDF file and then choose Download Linked File As...Open that file in /Applications/Preview.appFile > print
    Adobe Reader 11.0.04 PDF plug-in
    Same security challenges on Mavericks as first bullet
    With PDF imaged in browser, either select print icon from the plug-in toolbar, or mouse over the bottom one inch of displayed document and you will see a printer icon in the popup toolbar. Use that.

  • After installing update 11.0.07, I have been unable to print pdf douments from websites displayed in I.E. 11

    I just installed 11.0.07 and since then have been unable to print pdf documents from websites displayed in I.E. 11 (32 bit). The problem did not exist until I installed the update. Opening the same sites with Chrome solves the problem, but some of the important sites I use, (FAA WebOPPS for instance) don't work with Chrome or anything other than I.E. for that matter. Does anyone know if Adobe is aware of the bug and working on a fix?

    Let me put it in context.I am a developer, and in my work we create a flex application a few years ago and we are providing support to this application. Since 2 days ago th button we create in our application for View PDF just stopped working. We use this code:
    public function navigate( url:String ):void
      navigateToURL( new URLRequest( url ), OPEN_NEW_WINDOW );
    It is very simplistic and worked fine as I told you, until Tuesday this week. Please tell me what happened, it seems the last plugin version crashes somewhere and my button just does not work any more.
    Thank you.

  • Function Module for getting address from address number

    Hi all,
    Is there any function module for getting address from address number. kindly reply.
    regards,
    siya

    HI,
    just try this function module:
    CALL FUNCTION 'HR_GET_ADDRESS'
        EXPORTING
          ankey          = ankey
          anart          = anart
          molga          = '01'
        IMPORTING
          address_detail = adr_data
        EXCEPTIONS
          not_found      = 1
          OTHERS         = 2.
    HOPE IT WILL HELP YOU
    regards
    rahul

  • Drag and dropping an address from address book to the desktop, the address file does not go where my mouse is positioned.

    If I drag and drop an address from address book to the desktop, the address file does not go where my mouse is positioned. It winds up somewhere in the middle of my screen. Any way to have the address file land and stay where my mouse pointer is?

    You have to assign the favicon yourself to the desktop shortcut (right-click the shortcut: Properties) after you have dragged the link to the desktop.
    You can usually find the favicon in Tools >Page Info > Media and save the icon there.
    Otherwise use the main domain of the website and add favicon.ico (e.g. mozilla.com/favicon.ico ) to display the favicon in a tab and save that image to a folder.

  • Creating a drop down to add customer address from Address book in numbers 0

    Hi fellow Mac people,
    I have a numbers invoice created and want to be able to add my customers addresses from address book using a drop down menu or just have it retrieve the info from address book
    Anyone know how to do this
    Any help would be great
    Thanks
    Rob

    You can drag an entry from the address book into a table in a Numbers document. Numbers does not have a way to do add contact information via a drop down menu. The table you drag the contact(s) into should have column headings for each item you want (name, address, phone, etc) as explained in the User's Manual.
    What you could do is create a table for all of your customer contact information. Every customer would be in the table. You could use then one of the LOOKUP functions or a popup menu to chose a particular contact from the table and transfer it to where you want it (such as on an invoice or an estimate or whatever other tables you have in your document).

  • Mail and addresses from Address Book

    When I type an e-mail address in the "To" field of a new message, Mail recovers the full name from Address Book and adds it to the e-mail address. Sometimes I don't want this to happen, instead I want to enter just the plain e-mail address. I know I can edit the address in the "To" field, but I have to enter some character(s) to override the default, otherwise if I just remove the name the system puts back the full name from Address Book. Is there a possibility to get just the e-mail address from Address Book but not the full name of that person? Sometimes I use nicknames, or mnemonic characters instead of real names and I don't want these to be seen by the recipient.

    I like the idea of Mail retrieving the email addresses from Address Book, but what I don't like is that it also retrieves "Last" and"First" names, and that it does not allow me to remove them from the "To" field when composing the message. Imagine that I have an entry in my Address Book such as "JOHN (THE FAT) DOE", Or "MARY (THE BLOND) DOE". Obviously, I do not want the recipients to know that I call them "the fat John", or "the blond Mary". Or, that I am sending a message to several people, and for confidentiality reasons I do not want them to know the names of the others. In other words, I want to retrieve email addresses from Address Book but NOT the real name of that person, or at least have the possibility to remove Last and First Names from the "To" field and show only the email address.
    Thanks, and regards.

Maybe you are looking for

  • F2480 ink levels not available on Windows 8.1 (64 bit)

    Hi I have a HP Deskjet F2480. I have recently installed Windows 8.1 (64 bit) and upgraded all relevant drivers and software. The printer is working OK however the new software does not allow me to check ink levels. As you can image I have already tri

  • ITunes 7 and proxy servers...

    I havent been able to use the music store for ages because of proxy server problems and then yesterday i updated to iTunes 7 and managed to connect, browse and even buy a couple of songs... Today I can only get a message which says You must log in to

  • Windows 8 vs CS3 trouble

    I've upgraded to Windows 8 and having trouble running CS3 after re-installing it.  Can you help?

  • LMS 4.2.2 - Compliance Policy and PSIRT/EOX Job Report

    I noticed that the job titled Compliance Policy and PSIRT/EOX Job Report has been running since oct 4, 2012 @ 00:30:00.  I can see that previous jobs usually take about 3 minutes to complete.  Is there a way to stop the job?  Is it safe to stop the j

  • Can't get itunes to download and I tried everything

    I have a windows 7 64 bit and in order to use my new i-pad, I had to update to the newest version of itunes (10.5.2).  The update wouldn't install, and I have spent about 6 hours trying all of the following (multiple times!!): updated and repaired .N