HT2497 how should i configure time capsule with time warner arris as separate networks?

i have been using the time capsule 4th generation with my home network but my connectivity seems to sometimes disconnect atleast with my macbook pro i always seem to be having to go place my cursor on the wifi logo to keep it consistent? i could jsut try and continue but really want a simple fast direction in what to do and how to configure this so that i only have access to my time capsule and network while my family may have access to the arris time warner cable network... ive heard of bridging and have had it so that my router be a bridge. whats the benefit and actual meaning of bridging in lame terms? i understand that bridging means it just runs internet through that device... so that device isnt setting any ip adresses? anywho ive messed around with the twcale internet site a bit hope i havent messed up too much. when i called time warner cable today they said they could only assist me with the arris side and not advise me with time capsule config... now i want to call apple but it seems i have to pay to call them? wow. and i bought the time capsule and best buy and was on hold for 10 minutes while being hung up rght when i seemed to be about to be helped. oh joys. anywho... help please?

We recently switched back to TWC here in the valley, att was horrible. We get 22.6 download and 2.24 uploads usually, however...we too have been having issues with the internet becoming sluggish throughout the day, not just at peak usage times. We have 2 computer plugged in directly and 3 others wireless but not on at the same time all the time.
I haven't gone into the Arris this time around, but am thinking there are settings that are screwed up. We have been using the Time Capsule's wireless connection and it is terribly slow. I'm not sure if there is a problem with the settings there or what.
Anyone, anyone, Beuler, Beuler?

Similar Messages

I want to get good wifi in my house . I currently have a time warner modem/router separate from my phone modem but my upstairs does not get good reception. What would be the best way to get the best wifi if I started from scratch

I have a combination modem/router from time warner that is separate from my phone line but I get bad reception on my apple tv an ipads upstairs in my house. I would like to fix this and want to know the best way to go about it . Whether getting two modems and routers or just one base station. Please help

It is possible to extend a WiFI network using Apple's Airport Express, Airport Extreme Base Station, or even a Time Capsule. However the router that is creating the network (the one you have downstairs) must be configurable to permit another WiFi device to extend the network. All Apple WiFi routers can be configured that way, but there are many third party WiFi routers that cannot. The two routers can be connected wirlessly or by ethernet. From your description I suspect ethernet would be prefereable if yoiu had a good way of routing the cable.

Airport Extreme 6th generation and Time Warner, Arris modem - no internet on mac

After installing a new Time Warner Arris modem we have encountered the following issues:
Light is green on the airport and everything appears normal
Wifi only works on iPhones, roku, and windows laptops.
Ethernet from airport extreme is also working (xbox one works fine).
Wifi internet does NOT work on Mac computers (we have two in the house both running Yosemite). The light on the airport is green and the macs can connect to wifi but cannot connect to the internet (DNS issue?).
The wifi on my mac yosemite laptop does work on my office wireless and anywhere else but home.
Backstory:
So a few months ago I purchased a brand new 6th generation Airport Extreme 802.11ac. It worked fine with our old generic Time Warner cable modem until we forced to upgrade to a new Arris modem/router combination this weekend to upgrade our internet speeds (I don't recall the model I can get this later). We told TWC that we did not need a router and would prefer to use the Apple router but they said it would work just as before by just plugging it into the ethernet port.
Initially we had network errors and I had to change from NAT to Bridge mode on the airport extreme and this worked for about a day. The next morning I could only get internet and wifi on my iPhone or a windows machine elsewhere in the house.
What I tried (none of these worked):
resetting the router and modem worked briefly but the problem repeated itself a few hours later or after connecting to a different wireless network.
deleting network config files (http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/).
deleting the wireless network from saved networks and connecting again.
Again this is a problem with mac laptops ONLY. I have no machines running an older version of OS X so I can't test that easily (I can borrow one from a friend to rule that out). We have 2 Mac computers both running yosemite and both have the same problem. Every other wireless device in the house works like a charm. Any ideas?

(using a White, new Surfboard 6141 and Time Warner as provider)
This is a simple cable modem, that will deliver only one IP address to the AirPort Extreme.
My apple extreme in set in Bridge,(by default it is a 2007 model. Has never been a problem when I used Verizon.
Bridge Mode is not the correct setting for the AirPort Extreme. It needs to be in a Router Mode of DHCP and NAT.
Bridge Mode would have been the correct setting with a Verizon modem/router......but the SB6141 is not a router....it is a simple modem.
You can try to make the settings change to see if that will work, but in most cases when you are making a modem change on a network, it is recommended to first reset the AirPort Extreme back to factory default settings (to wipe older and possibly conflicting settings), and then configure the AirPort to work with the new modem.

HT1178 How setup and configure time capsule with ADSL modem for WiFi internet

For my first time time capsule 2TB set up,would like to know about configuration time capsule with ADSL modem for use WiFi internet!

You will want to turn off the WiFi on your modem (if there is WiFi on your modem). Connect the TC and the modem together with an Ethernet cable. Then, turn on your TC and set it up to be in bridged mode, connection type 'Ethernet'.

How do I configure clearcase access with JDEVELOPER 10.1.3.36.73

How do I configure Jdeveloper version 10.1.3.36.73 (the latest download) to use clearcase for scm? There is no clearcase plugin in the extensions directory.
I am currently evaluating Jdeveloper for use on a large project, and not having clearcase support is a dealbreaker. I have tried help->update, and it tells me that there are no updates (or, the port it uses is blocked by my company's firewall).
Anyone know where I can get the clearcase extension?
Thanks
Bill

Hi Bill,
Clearcase support is on the update center which can be difficult to access from behind a firewall with authentication. Do you know if this is the case? You can check the proxy settings in Tools -> Preferences : Web browser and Proxy.
If you still having trouble try http://www.oracle.com/technology/products/jdev/101/update/center.xml and downloading the clearcase extension for JDev 10.1.3.36.73 directly. Then you can install it by pointing Help -> Check for updates at the downloaded file.
Hope this helps,
Geoff

How can I make Time-Warner (Roadrunner) mail come to .mac or ME mailbox?

I've had .Mac for a couple of years to be able to synch 2 computers with iDisc. But now I'd like to use
the .Mac and/or ME address to make mail addressed to either address come to the appropriate boxes in my Inbox section in Apple Mail. (At present all mail comes to my Road Runner (Time Warner) mailbox within my Apple Mail program.)
Looking at the Accounts area of the Preferences section of Apple Mail, the only thing I can imagine I've got wrong is the "Incoming Mail Server." For both MobileMe and .Mac.com I've listed it as "mail.mac.com" (for the Road Runner box it's listed as "pop-server.wi.rr.com"). Any ideas appreciated.
Cap

I'll refer back to this because Mail is a constant headache, often not functioning or tripling the amount of time due to 3 mailboxes on 3 computers. Haven't come upon a solution. Also, besides Apple Mail, there's my Time Warner Roadrunner account plus the school's account (recently they went from private program to Gmail). I just don't grasp the sub- or super-structure of e-mail, which may be preventing me from gaining coherence and efficiency. I need to discover how to use the KISS principle for stop emailing except off of others' websites.

How can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

how can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

Hi,
This is currently not supported by iOS for any devices. Rumour is that iOS 5 will finally add this function, until then I'm afraid you are stuck with the good old cable.
Jamie

How to activate Face Time in india at idea network

Dear Sir,
I have iphone 4 original. i want to activate face time in india on idea network. But always said not successfull. How to activate the face time i connected the to wifi also. I there other way to activate facetime on iphone4.
Thanks
Manoj

iPhones from countries where FaceTime is not permitted cannot have it activated elsewhere.

Time Warner Arris router/modem will not allow me to print wirelessly

Time Warner recently installed an Arris mode,/router and now I cannot print wirelessly to my HP printer from my iphone, ipad or macbook pro. I could do this when I used a Belkin modem with the Arris router. Any suggestions?

Something you might check is the Bonjour service in the router. If the router doesn't support Bonjour services, you will not be able to use it to print from any apple device via AirPrint. You can still print from a Mac PC if the drivers are installed, but you will not be able to print from any iOS device. You can use the app below to test the network to see if it will alow Bonjour services. Let me know what you find.
Bonjour Browser
I am a printer tech for HP.

How do I configure Time Capsule as backup with an existing d-link router?

I just purchased a 1T Time Capsule. My original idea was that it would replace our d-link router. However, I was not happy with the speed and connectivity compared with the totally awesome D-Link (Dual Band DIR825), which is solid and connects and stays connected with all computers in my household. So, now I want to use the Time Capsule as the backup for three MacBooks (all running the latest OS).
So... how do I set this up so that it will work? I have a total of three MacBooks and three PCs, but only the MacBooks need to backup to the TC. I handle the PC backups separately.
I am new to the Mac world, but am relatively comfortable with computers. Networking not so much!
Equipment: D-Link DIR 625 attached to a Cisco high speed modem attached to the Comcast all in one digital voice modem. I get the fastest home Internet Comcast can provide.
1 new MacBook Pro
2 older model white MacBooks
Also, is there any way I can set up print sharing through the Time Capsule? It doesn't work well over the PC network, and the USB share utility that comes with the D-Link router is terrible.
I have an older HP Laserjet 3030 and a newer Canon Pixma 970. Neither printer is wireless.
Any help you fine people can give me would be much appreciated!
Thank you!
Linda H.

OK, thanks for the info. Let's get the TC setup to work with your Macs for backups and then tackle the printing question as a separate item.
Connection wise, you will connect an ethernet cable from one of the available LAN <-> ports on your D-Link to the WAN (circle icon) port on the TC.
To make the TC configuration simpler, rather than using wireless to configure the TC, temporarily connect another ethernet cable from your Mac running Snow Leopard to one of the LAN ports on the TC
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
(You may be asked if you want to update AirPort Utility. If so, go ahead and update and then restart AirPort Utility again.
After you have clicked the Manual Setup button...
Click the Time Capsule tab below the row of icons to assign a name to your TC, device password (write this down) and adjust Time Zone Settings
Click the Wireless tab below the icons
Wireless Mode = Off
Click the Disks icon above the Time Capsule tab
Click the File Sharing tab
Make sure there is a check mark next to Enable File Sharing
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update at the lower right and the TC should restart in 15-20 seconds and you should have a green light.
As a check, open your Macintosh HD and look for your Time Capsule icon under the SHARED heading on the left side of the panel. If it's there, that's good.
If it's not, click anywhere on the open desktop to display the Finder menus at the top of your computer screen.
Click Finder, then click Preferences, then click the General tab
Under the heading of "show these items on the desktop" make sure that there is a check mark next to "connected servers"
You should now see the TC icon under the SHARED heading. If not, try restarting your computer.
Keep the ethernet cable connected between your Mac and TC for the first complete Time Machine backup as it will go much quicker with ethernet. You can do subsequent backups using wireless since they will only take a few minutes each hour.
Not sure if you want to setup Time Machine at this point or concentrate on the printers.
Please post back on your progress.
Message was edited by: Bob Timmons

How do I configure Time Capsule to work with 8 port unmanaged switch?

This is what I want to end up with.
cable modem
Time Capsule
wireless network 8 port unmanaged switch TRENDnet TEGS80G
entertainment center(TV, xbox 360, dvd, apple tv, ect...)
I have been using the above setup with an E3000 router in place of the time capsule without any problems, and was expecting to just be able to switch out the E3000 for the time capsule and keep right on rolling. At the moment, without the switch plugged in, using the time capsule as a stand alone wireless router, everything works as intended. However, I don't want to have every device in the house pulling off of wireless. Whenever I plug my switch in I lose internet connectivity. I assume this is because both the switch and the Time Capsule are trying to direct traffic and creating a conflict. I have attempted to disable the NAT in the Airport Utility and this is what happens.
Where do I go from here, or am I heading in completely the wrong direction?

Unfortunately, you are on the wrong track, heading in the wrong direction at the moment.
We need to learn whether you have a simple modem or a modem/router.
This will determine whether the Time Capsule is to be configured in router mode to provide DHCP and NAT services for the network......or if your "modem" is already doing this.....the Time Capsule needs to be configured in Bridge Mode.
So, I suggest that you disconnect the switch from the Time Capsule for now, and power everything off except the modem, Time Capsule and the computer you are using to configure the Time Capsule, and get things working correctly first. Then, devices can be added one at a time to verify proper operation.
If this seems to make sense to you, and you want to move forward, please post back with the make and model number of your cable modem.

How do I configure Time Capsule to recognize my Denon receiver?

Hi all,
New to the forums but have spent the past few days perusing them to no avail - your help is appreciated from a networking newbie!
I have a Denon AVR 2312ci which I'd previously had hard-wired to an old Belkin router. The only hiccup I'd had at the time was the requirement that I disable UPnP. I have an Apple TV that I use to stream music via airplay to the receiver, which works quite well. However, it requires me to turn on the receiver, whereas directing airplay to the receiver itself would "wake on LAN", a feature I like.
Since then, I've upgraded to a 2TB Time Capsule. However, following the router change I am no longer able to find the Denon on my home network, nor do any of the networking capabilities of the receiver work any longer. I tried disabling DHCP on the Denon and assigning a static IP address, but this didn't work. I tested multiple Cat5e cables using various LAN ports on the router - no luck there, either. I tried to reset the network card on the Denon - same result.
I'm beginning to wonder whether the problem lies with the way the Time Capsule is configured - any thoughts or suggestions out there?

LP,
IT WORKS!
To summarize for anyone who might have this problem, here's what fixed it:
1) Time Capsule --Cat5e--> LAN port of router/switch (in my case, an old Netgear 10/100 with DHCP and NAT disabled) --Cat5e--> Denon receiver
2) Through Airport Utility, made an IP reservation for an IP outside of the DHCP range (in my case 10.0.1.2 through 10.0.1.200, so I chose 10.0.1.202). You will need your AV receiver's MAC address to do this.
3) Disabled DHCP on the Denon
4) Manually entered the IP address (e.g. 10.0.1.202), subnet mask 255.255.255.0, default gateway 10.0.1.1 (e.g. the TC's local IP), primary DNS 8.8.8.8, secondary DNS left blank, proxy off
This worked after I left the unit on standby for a period of a few hours (did not immediately work). I did not need to do any port forwarding, DMZ, etc.
I am now able to access the unit from my web browser in my local network and am able to airplay directly to the unit using my other airplay enabled apps/iTunes.
Much thanks to LaPastenague for his very helpful advice!!
KS

HT2497 how to setup airport to work with IPV6

How can I setup my AE to work with IPV6 that was launch last night in the east coast? Or there is no need for me to do anything on my AE because it will setup itself automatically?
Thanks,
TCFL

IPv6 service comes in a variety of "flavors" so it would be difficult to provide you with exact configuration settings for your AirPort router.
I would first check with your ISP to see if they have implemented IPv6 service. If they have, they should provide you with what requirements must be satisfied to use IPv6.

How should I configure XI to Send Purchasing Data to Catalog?

Hi,
I'm asked to do the config for XI for the transfer of records from R/3 to CCM.
The report RM06CCMEXP is on the ECC system and when this is run i can see that data is sent to XI.
In XI i see a message from the ECC system:
Sender Service               BS_ECC_DEV
Sender Namespace        http://sap.com/xi/APPL/Global
Sender Interface             CatalogueUpdateNotification_Out.
This is also as is described in the sap.help.com at this link
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/46/b596e138a941ce9fba8fc8533674ee/frameset.htm]
Questions
Is the interface 'CatalogueUpdateNotification_Out' the correct one?
If yes, i need to know which SWCV i need to get the namespace "http://sap.com/xi/APPL/GLOBAL" in the Integration Directory? I suppose it is standard in the SLD, but which one is it? If i have that, are there standard mappings there that i could use?
If the interface that sends the data is not the correct one, how do i change do i configure the ECC system to use another interface, and which one should it be? And then can i just proceed as is described in the cookbook for CCM 2.0?
Kind regards
Robert

Hello, one more time
I know this type of problem. Solution is very simple. All you need to do it is download from service.sap.com software distribution center proper XI Content of SAP APPL and upload SAP APPL to your Integration Repository.
Choose the latest version of SAP APPL component.
BR
Dzmitry

How to install,configure and work with omniportlets

Hi,
What are the steps i need follow to install and work with omniportlets.
What are the softwares in need install. Please give required steps.
I downloaded.
1.PDK-Java software, PortalTools (OmniPortlet & Web Clipping), and common libraries
2.Download the preconfigured OC4J.
Is there any additional softwares needed.
I should install Application Server 10g?
I have to create some demos using omnipotlets which are given in the page url:http://www.oracle.com/technology/products/ias/portal/omniportlet.html
Thanks.
NR

Hi,
working with omni portlets they given two installation methods.
1. the preconfigured standalone OC4J with OracleAS PDK.
2 Iinstall OracleAS Portal as part of the Oracle Application Server release, then most of the configurations are already done.
I have
OS: Redhat Linux 4
Browser:Mozilla firefox 1.5.0.3
database:Oracle10g.
I performed 1 method but while openig link http://172.16.122.249:8888/portalTools/omniPortlet/providers/omniPortlet
i am getting the error
Error occurred while rendering Provider Test Page - view the HTML source for more details
I have to create some demos using omnipotlets which are given in the page url:http://www.oracle.com/technology/products/ias/portal/omniportlet.html
what installations i need to done.
Please help me.Thanks
NR

HT2497 how should i configure time capsule with time warner arris as separate networks?

Similar Messages

Maybe you are looking for