HT2900 Can managed users be allowed to create bookmarks within the approved sites?

I have a young child for which I have setup a managed acct using the most restrictive Internet content filter option. I have selected only those websites he can visit. One of the allowed sites is YouTube. Sometimes he wants to bookmark certain videos within the YouTube domain. Is this possible WITHOUT an administrator having to constantly authenticate / supply admin password? There is already a bookmark for YouTube.com but this doesn't let him go direct to certain desired videos such as, for example, 'club penguin walkthrough'.

Similar Messages

Add ability to create bookmarks within iOS app

It would be great to have the ability to create bookmarks within the iOS reader app. That way I can go directly from a PDFs download via website/Dropbox and not have to first edit the document on my computer to add any bookmarks.
Acrobat Reader for iOS

To Demo:
My main email address linked to the mail app in my iPad is with Yahoo. When I add a test group on my iCloud, my iPad keeps asking for my Yahoo password repeatedly and no sync seems to have taken place. Can't understand why. Might have to troubleshoot a little bit more.
I agree that it is a pain to add a group of names individually and I generally use the Gmail on the notebook for the Gmail app - much easier and faster too.
It appears that the standard mail app is geared towards individual personal mail rather than for professional use. Even then...it could have been better.
Thanks guys for all your input. Looks like there is no solution within the standard mail/contact apps in the immediate future other than using other apps to supplement.

How can I create cursors within the cursor?

How can I create cursors within the cursor?
Table1 2001 - 2007 data
Account_no
Account_eff_dt
No_account_holder
Num
Seq_Num
Value1
Value2
Table2_Historical (doesn't have Num as a field) 1990 - 2000 data
Account_no
Account_eff_dt
No_account_holder
Seq_Num
Value1
Value2
Table3_06
Account_no
Account_eff_dt
No_account_holder
Num
My result table should be:
Table_result_06
Account_no
Account_eff_dt
No_account_holder
Num
Value1_min (the minimum value for the minimum of record_sequence)
Value2_max (the maximum value for the maximum of record_sequence)
I have to get data from Table1 and Table2_Historical. If one account was open in 1998 and is still effective, the minimum value of that account is in the Table2_Historical.
Let's say I open a cursor:
cursor_first is
select * from table3_06;
open csr_first
loop
fetch cursor_first into
v_Account_no
v_Account_eff_dt
v_No_account_holder
v_Num
EXIT WHEN csr_first%NOTFOUND;
How can I open a second cursor from here that will get the Seq_Num from Table1
csr_second
select Seq_Num from Table1 where
v_Account_no = Account_no
v_Account_eff_dt <= Account_eff_dt
v_No_account_holder=No_account_holder
v_Num = Num
How does it works???
Thanks a lot

Thanks so much for replying back. Here is what I am trying to do.
I have to create a table for each year 2002, 2003, 2004, 2005, 2006 that has all the account numbers that are active each year plus some other characteristics.
Let’s say I will create Table_result_06. This table will have the following fields. The account number, account effective date, Number of the account holder and the field Num (The primary key is a combination of all 4 fields), the beginning look of value 1 in 2006, the last look of value 1 in 2006.
Table_result_06
Account_no key
Account_eff_dt key
No_account_holder key
Num key
Value1_min (the minimum value for the minimum of record_sequence)
Value2_max (the maximum value for the maximum of record_sequence)
All the active account numbers with the Account_eff_dt, No_account_holder and Num are in the Table3. As such I can build a query that connects Table3 with table Table1 on all 4 fileds, Account_no, Account_eff_dt, No_account_holder, Num and find the Value1_min for the min of req_sequence in 2006 and Value1_max for the max of req_sequence in 2006. Here my problem starts.
Table 1 doesn’t have a new entry if nothing has changed in the account. So if this account was open in 1993 and nothing has changed I don’t have an entry in 2006 but this doesn’t mean that this account doesn’t exist in 2006. So to find the minimum value I have to go back in 1993 and find the max and min for that year and that will be max and min in 2006 as well.
As such I have to go to Table_2 historical and search for min and max. But this table doesn’t have the field NUM and if I match only on the Account_no, Account_eff_dt and No_account_holder I don’t get a unique record.
So how can I connect all three tables, Table 1 for max and min, if it doesn’t find anything will go to table 2 find the two values and populate Table_result_06.
Thanks so much again for your hep,

Four straight lines have appeared on my screen, top to bottom. Any idea where the came from, and can they be removed? These all come within the past few days.

Four straight lines have appeared on my screen, top to bottom. Any idea where the came from, and can they be removed? These all come within the past few days.

It's most likely the Display going out on a few lines, but can be Graphic card related, which model & display?

Why when I create a new path or layer in Illustrator CC it goes to the bottom of my layers list? Where can I set it up to create them at the top of the list as it usually does?

I don't know if i did something wrong and i didn't notice it....but i was working normally on Illustrator, and suddenly all the new layer i created when to the bottom of the compound of layers i had. It had never happened to me before and i don't know what to do to reset it. It is really annoying.
I really appreciate if somebody can help me!
Thank you!

Select the drawing mode at the bottom of the tool panel.

Project Server 2013 - New - Project, creates groups at the root site level, Server is in Project Server Permission mode

I created an Enterprise Project in PWA and moving up to the root site settings I see there was the four basic groups created there just for this project. This is not acceptable when there will be 500 projects on the server. Is there a setting to turn this
off. I guess we will rarely create projects with PWA, so I will see if creating a Project in Desktop has the same effect. Still would like to understand why this is happening. Thank you.
Site Provisioning settings are located under Central Administration -> Manage Service Applications -> Project Application Service -> Manage ->
Project Site Provisioning Settings
Turning that off allows the group creation to cease.
Then PWA Settings -> Operational Policies -> Connected Sharepoint Sites
allows selective creation of a Project Site (Workspace)
This set up is perfect for what I require.

I assume that you're talking about the SharePoint security groups for each Project site? If so, then this is as designed. Each site can have different users, so this is absolutely necessary when you use SharePoint. If you do not want to create project sites
for your projects automatically, you have already discovered how to turn off automatic site creation.
If you turn off the Project application service, you disable Project Server. I don't think that is what you want to do. I don't understand your objection to the groups because if you are running in Project Server classic permissions mode, Project Server
manages the group membership for you.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

Can iTunes purchases be loaded to multiple iPods within the same household

Is it legal to download purchased music from iTunes Music Store to more than one iPod within the same household?
I understand the implications with teenagers sharing music in this manner; however, it seems crazy that I need purchase duplicate music to download to both mine and my wife's iPod.
I tested this with a few of the songs I purchased over the weekend and the iTunes software will allow the files to be imported into iTunes but not the iPod. It gives a message that states my wife's iPod is not autorized to download these files.
Please advise if it is legal to do this and if so how I can go about importing purchased files to my wife's iPod?

It says the files are not authorized for use on that her iPod. I made the purchases from my work laptop and updated my iPod from iTunes on my computer.
I added original CD tracts to the iTunes software on my work laptop and copied these and my purchased files to a second version of iTunes that is running on my home computer that my wife uses to manage her iPod.
I imported the folders to her computer by going to "File" and "Add Folder to Library". It brought the purchased files in to her library and auto-created a folder that it identified as imported Limeware files for the folders of the CD files.
When I updated her ipod it loaded all the files except for the 6 purchased files that I had brought in. That is when I got the message saying that her iPod was not authorized to receive the 6 purchased files.
In addition to not being able to load my purchased files to my wife's iPod, I am afraid that I will be charged for the imported CD files that iTunes automatically and erroneously identified as "Limeware" files.
Any advice? Thanks for the feedback and taking the time.

Reservation should be created only within the mentioned cost center range.

Dear All,
For IW31 t-code System should allow to create the Reservation of Insurance spares for the plant say "X" with cost center say 1 to 10.
Means system should not allow to create the reservation other than these cost centers.
is ter any standard way we can control this.
kindly guide me in this regard.
Regards,
santosh.

OK - I get it. In short - you want the material component to be entered on the order component screen (which by the way technically creates an item in a reservation) - but you don't want this material component to be relevant for issue (and probably not relevant for MRP planning).
If that is it - then if follows that you want to ensure that the field AUDISP is always set to never for this material in the component screen, subject to your cost centre criteria..
I don't know any user exits / BAdIs off the top of my head that can be used to achieve this in PM. I'll have a look - perhaps someone else might be able to make a suggestion?..
Edited by: Andrew Barnard on Feb 27, 2012 10:04 PM

Can you Setup a Active Passive DFS namespace in the same site

Hi,
I would like to use DFS for profile replication. I know MS doesn't recommend it, but was wondering if you could setup DFS namespace in an Active/ passive contests in the same AD site. I think or what I can understand of DFS is that if the Fileserver is in
the same site it would select it randomly and you cant specify which server is the primary.
Basically what I want is to have users only access File server 1, but if this file server 1 goes down to be redirected to file server 2.
Thanks,
Shaun

You could have a read-only Replica but that really doesn't help you in terms of the automatic redirection thing. You could also set up a 2-node replication group and disable the referral for the folder(s) on one node like below:
However the "failover" would be manually Enabling, which I doubt fits the bill.
Otherwise, I'm not aware of any configuration of DFSR that allows you to do what you're talking about (maybe someone else will correct me.) HOWEVER, I suspect a design that fits your use case may be to create a DFS namespace that runs
on a file server cluster. That way if Node1 goes down, the cluster fails over, and the data continues to be available on Node2 when accessed via DFS.
If interested, there are a couple ways to approach DFS in combination with a cluster.
Configuration1: The cluster is configured to host the namespace as well as the folder targets (where the actual data is). CAVEAT - The cluster can only be configured as a standalone cluster.
Configuration2: Create a domain DFS namespace that resides on other servers.
\\domain\DFSRoot for example. Then point each of the leaves/folder targets to clustered shares. So you'd create a subfolder called "Profiles" that points to the clustered share that houses the profiles.
Just an idea. Hope this helps.

BT Cloud - creating folders within the Web uploads...

On the Help pages the question, "Can I upload a folder or multiple files to the BT Cloud Web Client" is answered by explaining how to upload multiple files and then says you can create a new folder within the Web uploads folder to store them. Unfortunately it does not explain how to create the said folder - and as yet I have not been able to. Help please.
Solved!
Go to Solution.

This is an old thread, but still relevant to my current issue.
I've just joined BT and have activated the BT Cloud. I've tried to create a folder by clicking on the three little dots, but it's disabled. I uploaded a file and then it became enabled. Clicking on it though only allowed me to move it to trash. I moved it to trash and the 3 little dots became disabled again.
How do I enable this to create a folder? Surely it can't be that hard!!
Cheers,
Graham

New laptop with InDesign CS6 installed will not allow mouse to click within the fly-out windows.

At first, it wouldn't allow me to click on the Selector tool either; had to press "V" on the keyboard to toggle to it. I can open and close the fly outs, but the mouse doesn't recognize anything clickable within the window itself, from the pages, to the styles etc. I checked the other CS6 software, and no problem in either Photoshop or Illustrator (didn't go beyond those). It's a new computer so there are no old version issues; we've uninstalled and reinstalled twice, including any updates and fixes out there. Any ideas? I'm dead in the water here....

Success! Found the answer here:
http://helpx.adobe.com/indesign/kb/indesign-tools-panels-dont-respond.html
Many thanks

Cant create bookmarks in the bookmarks toolbar panel

Hi guys
I cannot create any bookmarks in the bookmarks toolbar panel. When ever I add a website to the bookmark toolbar panel, it is not displayed in the bookmarks toolbar panel. If I go to bookmarks menu and check under bookmarks toolbar, all the websites are there! I have attached links to the screenshots.
[IMG]http://i42.tinypic.com/33x7hjm.jpg[/IMG]
[IMG]http://i40.tinypic.com/21jds1w.jpg[/IMG]
Regards,
Anish

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
*Firefox menu button > Options
*View > Toolbars (press F10 to display the menu bar)
*Right-click empty toolbar area
Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
*check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette into the Customize window to the Bookmarks Toolbar
*if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
*https://support.mozilla.org/kb/How+to+customize+the+toolbar
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
You can check for problems caused by a corrupted localstore.rdf file if the above didn't help.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

I am having a trouble that I can't overcome with dw cc view interface and the actual site on the web

Sorry - long title - I am and have been having the same problem for weeks as I attempt to learn a new version of Dreamweaver and the bootstrap stuff (I think)
I had one problem solved today with a development area interfering with MY site. Before that though - some of the js or css was changed on my site too and now I can't get the background color back on my site. My site [slimdangdoo.com] is basically informational and a place for me to learn - at least until I was able to set-up a sub-domain the develope on.
Since DW CC I have had to scramble to correct things that the new DW did to the old sites that I unknowingly opened and resaved.
I have also had the little problem of making changes only to have DW say that it isn't allowed because of a locked library. [Hmmm. I wonder if it means locked in a way I can change in the OS.]
So - right now - my site looks fine in Dreamweaver - but on the web it is not right ay all which would be obvious if you saw it. I depend on it for people to lock at photos of our vanation rental etc.
Anybody got anything I'm missing?

Ok I see it now. Fix your code errors.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fdev.slimdangdoo.com%2Findex.html
Which text is troubling you?
Nancy O.

After creating jobs within the project what is teh process upload to prod

I have a project with 6 jobs within it. now what is the process to upload or next steps.
What i noticed another user tried to access my project under that he is 'nt able to see all jobs, only few he was able to see.
This is my first task working on, really appreciate if you can advice me the next appropriate steps
thank you very much for the helpful info.

I have a project with 6 jobs within it. now what is the process to upload or next steps.
Go to Tools> Export. Collect your objects there from Local Object Library. Right click and export. This can be exported as ATL / XML files or can be directly exported to another repository. Remember to change the DataStore Configurations, table owners etc. suitable for the other env.
If it is within the DEV system itself, you can configure a Central Repository through which you can share objects to other local repositories.
What i noticed another user tried to access my project under that he is 'nt able to see all jobs, only few he was able to see.
Other user might have accessed the same project in a different local repository and the version available inside that local repository might not be what you have.
Regards,
Suneer

I accidentally dropped my Iphone 5s on the ground which caused damage on the corner edge of the phone. Is there a hope this can get repaired? My phone is still within the first year warranty. I hope to hear from you. Thank you.

I accisentally dropped my iphone on the ground causing damaged on the
corder edge of the phone. Can this still be repaired? My phone is still within the first year warranty. I hope to hear from you. Thank you

The standard iPhone warranty does not cover accidental damage. Apple will fix it, but they will charge the full repair cost.
The AppleCare+ warranty for the phone, which you can buy within 30 days of the iPhone purchase, does cover two incidents of accidental damage and repairs are charged at $75 I believe.
Your carrier warranty, if you have one, may cover accidental damage - check with them.
Matt

HT2900 Can managed users be allowed to create bookmarks within the approved sites?

Similar Messages

Maybe you are looking for