HT3669 HP laserjet m1005 Driver not visible

I have updated all the HP Driver Softwares available through the ASU but I didnt see the driver of HP LaseJet M1005 MFP even though its listed in the supported printer's list.
I even downloaded the available driver from the HP website but still was unable to use the printer.
What use is a laptop if it can't even print documents.!!!
Please help!!

I found the following at HP Support on the web:
Products with HP driver for OS X 10.7 only at www.hp.com:
Some supported products do NOT have an update available through Apple Software Update (ASU). These models are only supported with a .dmg driver download available from www.hp.com. If you have one of the following products, go to www.hp.com/go/support to obtain the full feature Lion download.
HP Color LaserJet CM1015/CM1017 Multifunction Printer series
HP Color LaserJet CM1312 Multifunction Printer series
HP Color LaserJet CM2320 Multifunction Printer series
HP LaserJet Pro CP1020/CP1025 Printer series
HP LaserJet Pro M1005 Multifunction Printer series
HP LaserJet Pro M1130, M1132, M1134, and M1136 Multifunction Printer series
HP LaserJet Pro M1210, M1212, M1213, M1214, M1216, M1217, and M1219 Multifunction Printer series
HP LaserJet Pro M1522, M1536, and M2727 Multifunction Printer series
HP LaserJet P1100 and P1102 Printer series
HP LaserJet Professional P1600 and P1606 Printer series
Just follow the directions above to enable printing with your printer.
Hope this helps

Similar Messages

Firewire drive not visible on desktop

Firewire drive not visible on desktop
System profiler knows it's there.
Disk Utility indicates that it can be un-mounted (only a generic 'turned down page' for volume icon however), Disk has full Hard Drive logo...
But I cannot access it on this machine, but plug it into another and it's ok...

(only a generic 'turned down page' for volume icon however), Disk has full Hard Drive logo...
You can see that appearance in Disk Utility if the volume permissions are such that the current user has "No Access."
Since it can be accessed normally from another machine, connect it there and do a Get Info from Finder, looking at the Ownership and Permission Details at the bottom. Assuming this is not a startup disk, if any of the permissions is set to "No Access", change it to "Read and Write". Don't click "Apply to enclosed items" however.

External hard drive not visible in disk utility or finder

Hi all,
I have had a good look through previous discussions and I can't seem to find an issue relevant to mine.
My external hard drive has 2 partitions (1 time machine back up, 1 general hard drive). The issue is that the HD is running when it is plugged in however it is not visible in either disk utility or finder.
I am running OS X 10.10 (Yosemite) on a 2010 MacBook Pro. I also have parallels desktop running windows 7. When I boot windows and plug in the HD I usually get the option to mount the HD to either OS X or Windows. With this issue the option window appears for a split second (not enough time to select either) and then disappears. It seems that the HD may be ejecting itself as soon as it is registered by the computer. I have tried using a different power cable for the HD and also a different usb cable, this doesn't help.
The external HD is a Samsung D3 Station, which i have had for 6 months now and never had an issue with.
Any help is appreciated
Thanks,
Bruce

An update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce

External hard drive not visible in Finder or Disk Utility

Hi everyone,
My Wester Digital 2TB external hard drive has disappeared, so to speak, with all my photos. I work as a freelance photographer. Mostly on Lightroom 5.6
When I plug it in, with firewire, I can feel the disk rotating normally however it does not appear in finder or disk utility.
I've tried using a USB cable, restarting my mac, forced restart, changing firewire ports (HD has 2 ports), plugging the HD into a different laptop and nothing.
Ive also searched Finder prefrences and visibility is enabled.
I have no idea what could have caused this as I was using the HD the night before. I didnt pullout without properly ejecting. Maybe the HD is full or almost, but I dont think that would the cause of these troubles.
I'm using a late 2011 Macbook Pro OS X 10.9.4
Any suggestions??
Thanx

An update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce

External hard drive not visible in Finder, but is operating

iMac, 2 Gb RAM, Snow Leopard 10.6.4.
It has 4 external USB drives attached through a powered hub. All of a sudden, after about a year, one of them no longer shows up in ‘Finder’. However, all four drives have an icon on the desktop. The drive is visible and verifiable in ‘Disk Utility’. Double clicking the desktop icon opens the drive and I can copy a file from it. iTunes can see it. From a Macbook’s ‘Finder’, over WiFi, I can see and copy files to and from the drive. Finder Preferences shows nothing amiss. I’ve shut down and restarted the iMac several times with no change. The drive just does not show up in Finder on the host iMac.
Searching this forum has not helped. Any suggestions?
Max

Well, this is embarrassing. A suggestion from an older thread on Macrumors.com called "Hard Drive does not appear in Finder / Desktop", solved this problem. Simply drag the missing drive icon from the desktop to Finder! Perseverance and different search wording AND reading a lot of stuff pays off.
If other's problem is not solved with this fix, you might benefit from this 10.5-based thread. They also mention an Apple 10.5 fix. Both URL's below.
The op's problem was that the drive did not appear in Finder OR the desktop but was operational. There was a lot of in-depth information with this fix embedded.
Thanks for the interest and suggestions.
Max
http://forums.macrumors.com/archive/index.php/t-209905.html
http://support.apple.com/kb/TA25203?viewlocale=en_US

External hard drive not visible on Mac Mini

I just purchased a Mini with Lion. The Seagate Freeagent external hard drive is visible from finder on the Mini but it is "read only" and it is not visible on the wireless network to my macbook. How can I make the external hard drive read write and make it visible on the network?

OS X can read an NTFS formatted drive, but not write to it.
Sharing drives | Utilities - Page 1 | Macworld
If you want to use the drive for sharing files between Window's and Mac's, then MS-DOS / FAT-32 works fine, except that it has a 4GB single file size limit.
If you are going to use the drive exclusively with your Intel Mac's for sharing, backup and booting, then use GUID Partition Table / Mac OS Extended (Journaled) for the Partition Scheme and Format.
Format a Drive to Boot Intel Macs | Tips | The Mac Observer

Time Capsule internal hard drive not visible

I have one of the older 500GB TC. It worked fine for a year then I decided to wipe the hard drive to erase the contents. I stopped the process in the middle of clearing the hard drive because it was going on about 8 hours. Every since then the TC works fine as a wireless router, but the internal hard drive is not visible. It won't do any back ups and it's not visible in the Airport program.
Any suggestions?

See Pondini's TM FAQs.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

IMac G5 17" is DOA... drive not visible in Disk Utility

About a week after my computer went out of warranty (OS 10.3.9), I have been experiencing random complete system meltdowns every 5 or 6 months. It begins while using the search feature, the beachball spins for 8-10 minutes then pulls search results. Following that, the system stalls on every task, and restarts with the blinking "?" folder. In the past, a re-install of the OS was a frustrating, but simple solution.
Last Friday, this happened for the fourth and final time. Upon attempting to re-install the OS, the install froze, locking up the computer. When I restarted to try to re-install the OS, the drive was not visible in the Disk Utility. It isn't visible in any Mac utility that I have tried, nor Disk Warrior.
I just replaced the SeaGate 7200 hard drive with a refurbed one, and the problem continutes--the drive is not visible to the install.
Is this 2-year old Mac now a paperweight? With the market resale value of this machine only about $500-600, I can't stomach spending a third of that to have something repaired, for all of this to potentially happen again.
Is it terminal? Has anyone else experienced this?
I'm really bummed out. As a Mac user for the last 15 years, I can't bear the thought of spending another 2 grand on a computer that will let me down again. I'm tired of the Pee Cee world hazing me as it is, and episodes like this don't make it any easier. Someone please tell me there is a solution...
doug

It DID break down a week after I received a call from Apple asking me to purchase an extended warranty. I wouldn't make that up.
It's on 10.3.9 because, in typical Apple fashion, 10.4 came out a WEEK after I bought my computer. I never bought the upgrade software from Apple just out of anger that a new computer was shipped with obsolete OS installed when a new version was hitting the shelves so soon afterwards. I work on 10.4.10 here at the office, and never missed the "features" at home. For $179, it wasn't something that ever screamed to be a necessity for a home computer.
The drive wasn't necessarily refurbed, but it was "recycled" and bought cheap to find out if it could be a simple solution. For $35, it was an easy attempt to figure out what was wrong with the computer. It didn't solve the problem, and was much cheaper than throwing money at it without knowing what was wrong.
At this point, I'm trying to save this box from becoming landfill. I bought a Dell PC laptop this past weekend for a third of what I paid for this iMac, and when it breaks down or obsoletes itself in 2 years, it won't be so difficult to swallow getting rid of it for something new.
I'm going to open this up again this afternoon to check the test LEDs and see if I can spot anything.
Don't get me wrong, I love Macs, and always will, but I can't any longer justify spending $2000 on a home computer. They are disposable appliances, and if they aren't going to come from the factory with warranties long enough to last through their lifetime, then it's difficult to spend that much money on a computer than only needs MORE money spent to maintain functionality.
I'll post back with my findings later today after I crack this open. Thanks for the assistance so far.
doug

Hard drives not visible in Disk Utility

I decided to add two additional 1.5 TB drives to my (early 2008) Mac Pro, in addition to the two 1.0 TB drives already there. I have a Mac RAID card, but the drives were not configured into an array because I was having battery and setting problems with the RAID card as described in previous posts.
I perhaps got the the not so bright idea to reconfigure my system from scratch, so I put the two 1.5 TB drives in, created partitions via Disk Utility, and then took all the drives out. I then put one of the new 1.5 TB drives in only, and re-installed OS X. So far, so good. Then, I put all 4 drives in, including the previous 1.0 TB drive with OS X on it.
Interestingly, the system then booted to the old 1.0 TB drive with OS X, and then it 'hung' on something with the spinning icon. I shut it down, and then put the new 1.5 TB with OS X, but it would not start. I yanked out the RAID card, figuring it was not helping. I managed to put the Boot DVD in, and the system does boot to DVD. However, it cannot visualize any drive at all, only the two DVDs in Disk Utility.
I tried several things. One is hardware scan by holding the 'D' key on startup -> no errors.
I then tried resetting the PRAM holding the command-option-P-R keys, same issue - boots to DVD, but no drives.
I then tried resetting what I think is the SMC, which is a button on the motherboard down near where the memory slots, and there a green light comes on next to the STBY area.
I'm out of the Apple care warranty, and I guess I'll have to pay for support going into the Mac Store, but I am hopeful someone has an idea.
I wondered if the cable from the SATA connector to the motherboard was loose, but it appears intact. However, I'm not sure how to get the plastic cage off.

Good idea, but the RAID card is out, and even the original drives are not visible. There is some type of BIOS or some related error.

Help unable to install OS X as hard drive not visible in internet recovery mode

Hi
I have a MacBook Pro
During use my screen froze and I had to force quit. Since then I have tried the following:
Turning on in safe mode
Internet recovery - no mac hd or partition recovery drive are visible in disk utility only OS X base system
Unable to install maverick as there's no disc visible to select
If I try to verify the start up disc is greyed out
Starting up with cmd r
Tried to reset PRAM
Start up disc does not display anything
ALL TO NO AVAIL, is the hard drive defunct or is there anything else I can try ?
Many thanks for your help
Elie

See this thread, this is 3rd regarding recovery/restore - as a starting point.
Obviously it is easier if you have a couple backups, a drive you can use, and don't mind erasing the internal drive.
It is a lot easier then. And it would be easier if you didn't have a notebook. This forum is not MacBook Pro but the tower or workstation.
https://discussions.apple.com/message/25145113?tstart=0#25145113

WDMyCloud NAS drive not visible

Hi,
on new Win8.1 pro PC, my NAS drive, WDMyCloud, is not visible in Network as a computer. It is visible under Media Devices and under Storage section though. So I can play media from it and access the management console but not access/transfer files and map
a drive to it. The WDMyCloud drive is accessible via my Android smart phone. Also my Windows 8.1 laptop can see it as computer (though sometimes takes a while now - until I connected the new PC all was working fine). The drive is connected to WiFi
router by ethernet cable and I can ping it from all devices. Please help me map the drive.
peter

Hi Fangzhou,
disabling the firewall had no effect. The link you provided did not provide a solution either. I don't use Norton antivirus, just the default Windows Defender. The fact that "unspecified error" mostly means "access denied" is interesting
though. I therefore investigated further and found 2 errors in the system event log which might point to the cause. The pc17 is the computer where I am having the problem, pc8 is another computer on my network. They seem to be having some kind
of dispute though lol. Not being able to join WORKGROUP and the NAS, as the settings indicate, would have made itself part of WORKGROUP, this may well prevent the NAS being visible and cause the "unspecified error". If this is the
cause then not really sure how to make these two combatants be nice to each other :-D.
Log Name:      System
Source:        BROWSER
Date:          10/04/2015 12:52:44 AM
Event ID:      8019
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      pc17
Description:
The browser was unable to promote itself to master browser. The browser will continue to attempt to promote itself to the master browser, but will no longer log any events in the event log in Event Viewer.
Event Xml:
<Event>
<System>
    <Provider Name="BROWSER" />
    <EventID Qualifiers="49152">8019</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-04-09T14:52:44.000000000Z" />
    <EventRecordID>2295</EventRecordID>
    <Channel>System</Channel>
    <Computer>pc17</Computer>
    <Security />
</System>
<EventData>
    <Binary>34000000</Binary>
</EventData>
</Event>
Log Name:      System
Source:        NetBT
Date:          10/04/2015 12:52:44 AM
Event ID:      4321
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      pc17
Description:
The name "WORKGROUP      :1d" could not be registered on the interface with IP address 10.0.0.17. The computer with the IP address 10.0.0.8 did not allow the name to be claimed by this computer.
<Event>
<System>
    <Provider Name="NetBT" />
    <EventID Qualifiers="49152">4321</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-04-09T14:52:44.164199800Z" />
    <EventRecordID>2296</EventRecordID>
    <Channel>System</Channel>
    <Computer>pc17</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>WORKGROUP      :1d</Data>
    <Data>10.0.0.17</Data>
    <Data>10.0.0.8</Data>
    <Binary>000000000400320000000000E11000C001010000010000C033000000000000000000000000000000</Binary>
</EventData>
</Event>

DVD drive not visible and detected

Hi,
I'm using windows 7 home 64bit on HP Pavilion dv4-3031tx notebook. Few months ago, I changed my DVD rom drive from HP service center as the burning option was not working. After changing, it was working fine. Now the drive is not visible when I open my computer. I installed all the drivers again from the recovery manager provided by the HP recovery disk, but still it remains same. Strange thing is when I insert my recovery disk and reboot my notebook seleting boot from DVD option, notebook can detect the disk and approaches for OS installation. If possible, I want to slove this problem instead of reinstalling windows from recovery disk as I have tons of programs installed in HD. Please give an effective solution. I'm really worried.
Thanks in advance.
This question was solved.
View Solution.

It is a fairly common problem and there is a Microsoft Autofix for it:
http://support.microsoft.com/kb/982116
You can run the autofix but I have had better luck with doing the manual registry edit which is also outlined on the link.
This is called the upper/lower filters problem and is the very low level driver built into Windows.

AirPort Extreme USB Connected Disk Drive Not Visible To Time Machine

My AirPort Extreme USB connected disk drive is visible in the Finder and desktop. It is not visible to Time Machine. When I open Time Machine and bring up the "Choose Backup Disk" the AirPort Extreme USB connected disk drive is not visible.
What am I missing here?

Hi Pete Mackie-
Nope. You aren't missing anything.
Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
Luck-
-DaddyPaycheck

Hard Drive not visible during install.

I recently tried to turn on my G4 and got just a white screen. So I assumed it was the hard drive. I installed a new Hard drive. Put in my Leopard disk and the drive is not visible. I went into Disk Utility to format it, if needed. It was not visible there either.
Out of suspicion, I plugged in the old HD into a different mac via USB and my data is there and visible.
What could the problem be? I went back and double checked all of the cables.

I know it's a pain to take out just to test, however, did you plug the new drive into the other system via USB to see if it's recognized also?
Usually in this situation, it's a cable problem. Either a cable is not seated completely, or in rarer cases, there's a problem with a cable itself. Since the old drive is visible to the other system, you may have another issue going on, like a logic board problem. I'd want to run the Apple hardware test. On the gray OS X system CDs that came with your system, find the one that says 'AHT Version x.x', insert it, reboot, and choose the extended test when prompted. Either of the TechTool programs can do similar testing.
By the way, your sig says you have Snow Leopard 10.6.3 installed, which is impossible on a Powerbook. Leopard 10.5.8 is the last operating system release available today for Powerbooks.

TS1978 Bootcamp Drive not Visible.

When booting to start-up mode (opt key), my bootcamp drive is not visible. It happens consistently, and I have tried resetting PRAM and SMC, and it doesn't work. The bootcamp drive also does not show up in the startup manager in OS X. Why? And what should I do?

Yes, windows 7 is installed on its own drive in my mac pro. No partition.
Here is the info on the same model hard-drive in system profiler. The faulty hard-drive provides no information, but the two hard drives are the same model. When I formatted the drive for windows, I don't remember if I used NTFS or FAT. How can I find out?
Capacity:          500.11 GB (500,107,862,016 bytes)
Model:          WDC WD5000AAKS-41YGA0
Revision:          58.01E01
Serial Number:               WD-WCASXXXXXXXX
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk1
Medium Type:          Rotational
Bay Name:          Bay 3
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified

HT3669 HP laserjet m1005 Driver not visible

Similar Messages

Maybe you are looking for